E71 and Parrot CK3000 Evolution volume levels

I can connect my E71 to my Parrot Car Kit but every time I do so it sets the volume to the minimum. Is this a common problem? Are Nokia/Parrot working on a solution for this problem? Has anybody else encountered this problem? And if so, is there a solution that doesn't involve me having to reset the volume to an acceptable level every time I connect my phone to the car kit?

Pick an unused profile and turn everything off in that profile except for what you do want.
This includes keypad tones etc.
I have everything off except for call and message. Calls are set at 2 beeps and messages at 1 beep.
Vibrator, breathing light, keypad tones, video calls, warning tones, etc are all set to off.
I renamed this profile (I used the "pager" profile) to "Car"
Under Menu > Tools > Settings > General > Enhancement set the "Headset" to use the profile you just configured for this purpose.
I have tried the "Wireless Car Kit" but found that it mine actually uses "headset" so I have set that as the default with my "Car" setting.

Similar Messages

N80 and Parrot CK3000 Evolution BT carkit

I have an N80 and above Parrot car kit, both with the latest firmware. However, the phone doesn't auto connect to the car kit with Bluetooth switched on (despite selecting this option when pairing).

Pick an unused profile and turn everything off in that profile except for what you do want.
This includes keypad tones etc.
I have everything off except for call and message. Calls are set at 2 beeps and messages at 1 beep.
Vibrator, breathing light, keypad tones, video calls, warning tones, etc are all set to off.
I renamed this profile (I used the "pager" profile) to "Car"
Under Menu > Tools > Settings > General > Enhancement set the "Headset" to use the profile you just configured for this purpose.
I have tried the "Wireless Car Kit" but found that it mine actually uses "headset" so I have set that as the default with my "Car" setting.

6120 and Parrot CK3000 Bluetooth

I have a Mitsubishi L300 Van with Factory fitted Bluetooth.
Parrot CK3000.
I was using a 6230I and the Bluetooth worked exceptional. On upgrading to a new 6120 i can connect but the volume i receive is very poor
I have asked Mitsubishi for help and they say they cant
Now i have been told its the Phones Firmware thats wrong
Can someone tell me how to fix this matter

Hi all, I have a N95 8Gb and have exactly the same problem.
I have tried everything, so believe me when I say the problem lies with the Nokia software.
I have an X3 with Parrot CK3000 handsfree kit and the phones pairs up fine but the volume is too low to be heard and cannot be adjusted in any way.
I tried installing other Parrots units (2 other models)but to no avail.
I have updated the firmware from 10.0.21 to 11.0.026 but no results.Software updater says software is running latest version.
I have tried quite a few other makes of phones and they work perfectly! So I can now narrow it down to the Nokia software.
I have reset,re-paired and done everything with no results.
This is the 4th discussion forum I am joining to get some help.
I am going to try take the phone in to a Nokia center to see if they are any help.
If there is anyone out there who can help, please it will be greatly appreciated.
Any Nokia people who care to step in and offer assistance would also be greatly appreciated, as I cannot think of any other way forward.
REgards,

IPhone 3G with Parrot CK3000 Evolution

I ordered a Parrot CK3000 for my Saab the other day. It should be here Monday so I can install it. I have read though that I cannot sync my iPhone's contacts to it to be able to use the voice dialing and stuff. It's not the end of the world, I don't mind selecting a contact from the phone, I'm just wondering if it's something that Parrot and Apple might support in the future. I know Parrot just came out with some iPhone/iPod-specific devices, but they are out of my price range. Thanks in advance for any help!

Hello,
Such an option is not available on the iPhone. Whether it will become available in the near future is not known. The fact is, that enabling iPhone to properly connect to other deviced via bluetooth is feasible, although it would take some rewrighting of iPhone's bluetooth support in general. That's the main reason I have recently put up [this|http://pleasefixtheiphone.com/problems/view/6330> ticket in an iPhone site.

E51, Garmin xt and Parrot CK3000 vs Clarion BLT373

When I had connected E51 to Parrot CK3000 I could hear all telephone activity through car speakers -telephone mute was active not only during call but also during pushing any key and i could hear beep from speakers. This was not too convinient but acceptable. With this connection I could hear navigation messages (Garmin XT) from telephone speaker.
I have changed car radio to Clarion and installed clarion bluetooth BLT373. With this device telephone mute is active only during call (not during dialing number or pushing any key). This is OK. But I cannot hear any navigation message nor from telephone speaker nor from radio speakers.
Does anyone know the solution of this problem.

ITunes screws up sort order and randomly screws up volume level

I'm really starting to regret replacing my 5g video with the classic. The video out issue is one problem, but my biggest issue is my Media Monkey isn't compatible and I had to go back to iTunes. First off I hate using iTunes to manage content. The format *****. But a bigger issue is why does having info in the id3 tag that has nothing to do with the track order of an album screw up the order? I shouldn't have to delete fields like "Album Artist" to get things to sort correctly. Track number should be the ONLY criteria for sorting tracks in an album. The second issue is, I've had problems witrh not being able to hear tracks, no volume. When I check in iTunes it has somehow adjusted the volume to zero for those tracks! I'll be happy when MM updates their software to work with the classic.

I'm really starting to regret replacing my 5g video with the classic. The video out issue is one problem, but my biggest issue is my Media Monkey isn't compatible and I had to go back to iTunes. First off I hate using iTunes to manage content. The format *****. But a bigger issue is why does having info in the id3 tag that has nothing to do with the track order of an album screw up the order? I shouldn't have to delete fields like "Album Artist" to get things to sort correctly. Track number should be the ONLY criteria for sorting tracks in an album. The second issue is, I've had problems witrh not being able to hear tracks, no volume. When I check in iTunes it has somehow adjusted the volume to zero for those tracks! I'll be happy when MM updates their software to work with the classic.

ITunes screws up track order and randomly screws up volume level

I'm really starting to regret replacing my 5g video with the classic. The video out issue is one problem, but my biggest issue is my Media Monkey isn't compatible and I had to go back to iTunes. First off I hate using iTunes to manage content. The format ***. But a bigger issue is why does having info in the id3 tag that has nothing to do with the track order of an album screw up the order? I shouldn't have to delete fields like "Album Artist" to get things to sort correctly. Track number should be the ONLY criteria for sorting tracks in an album. The second issue is, I've had problems witrh not being able to hear tracks, no volume. When I check in iTunes it has somehow adjusted the volume to zero for those tracks! I'll be happy when MM updates their software to work with the classic.

yosarian wrote:
I don't know what column I am sorting on when I drag the mp3s over to iTunes. It's whatever the default order is when you create a new play list.
I believe the default is to sort the songs in the order they were added to the playlist. If you want to keep them in track order, you can click on the "Track #" or "Album" column headers.
As for the built in browser duplicating the individual play lists, how does my ipod know which songs belong together? The artist to album menu? I have never used the browser feature, so will have to play with it when I get home.
When determining whether songs are part of the same album, I believe iTunes and iPods look at the Album, Album Artist (or Artist if there is none), and Disc # fields, and whether or not the album is marked as a compilation. If all those fields are filled out, there shouldn't be any trouble with the Browser recognizing albums.

Parrot CK3000

Well, I installed a Parrot CK3000 in my bosses car today and discovered later that the iPhone is no longer listed as a supported phone on the Parrot support page for the CK3000...
I'm guessing this is because downloading the contacts from the iPhone doesn't work.
Oh well, My Boss likes it anyway.
I on the other hand, I now know that the best choice for My car will be the CK3100.
Apparently form other posts I have read, it can download the contacts.

I just purchased an iPhone (w/ V1.1.1 SW) and I have a Parrot CK3000 Evolution car-kit (w/ V5.10c firmware)
It will discover the kit fine and pair, but when I reenter the car later it seems very unreliable in repairing. One time it did pair several minutes after entering the car, and the other time it did not seem to connect - but did when I unpaired and repaired (reentered PIN).
Anyone finding any tricks to make this work better? I just got off the phone with Apple support to no avail (could not find any info on it). I've also sent a note to Parrot support....

Using compressor DVD Studio Pro 4 will only accept ac3 format in the burn process. ac3 makes a nnsense of the good sound delivered, 30% reduction in volume, auto volume levelling giving unwanted volume variations. Used to be able to burn using AIFF/WAVE,

AS Above. Edited in FCPX. Excellent sound file. Using Compressor 4 to DVD Studio 4. Wanting AIFF or WAVE sound for acurate sound.
Previously DVD Studio 4 has accepted AIFF etc and delivered sound as reuired. Now, during the burn process everything other than ac3 is declined as 'video bit rate too high', but will burn if the AIFF format is replaced with ac3 (which I presume meanss the 'video bit rate too high' is referring to the sound file)
The issue with ac3 format is the huge reduction in original volume and worse, the 'auto volume levelling' that makes a nonsense of the original soundtrack - with simply aweful unwanted variations in volume Throughout the the dvd.
I have tried everything I can think of to get around this. The 'volume gain' in compressor doesn't make any difference. Exporting just AIFF and the Video to DVD 4 doesn't make any difference, it always declines anything but the aweful sound ac3 delivers.
I have customers awaiting a musci DVD, not with thei quality I can't.
Cheers
Phil

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

Is there any "mechanical" helper to get my volume levels the same?

I create playlists from ratings,(and comments),- and albums have different volume levels. As I always use my ipod to go to sleep, it is very destructive, to not be able to hear my music one minute, and then have it much too loud the next.
Is there ANYTHING, free or chargeable, physical or software, that can help me get my itunes library to all the same volume level. My problem is agrivated by the fact that I do have some shared downloads, and also someone put my vynils onto cd for me, but at a lower volume.
I might add, that I'm still a learner on the computer. I have been told to change the soundcheck -playback -preferences -itunes. I have tried it, ticked and unticked - it doesn't make any difference.
I'd be very gratefull for some advice. Please HELP, this has been going on for ages. Thank you, in anticipation.

I'm SO very grateful for your help! Have downloaded it, and have started to use it, but havn't listened to results yet.(just about to) THANKYOU SO MUCH.
Thankyou so much again, this could be the end of a long (negative) era!
A bit later: have listened to a little, seems a huge amount better. will update when used properley.
I'm anticipating some being way out. Though it says it can overcome old changed volume levels, is it best in your opinion, to put them back to original setting?
Many Best Wishes Vonnie

Volume level shortcuts on non-Apple keyboard

Hello.
I've connected windows-type keyboard (Logitech) to my iMac and there are no volume level control buttons (volume up and volume down).
Is there any way to assign a shortcuts for any button on the keyboard to control the volume level? This would help very much because volume is frequently used thing.
Thank you in advance.

It is possible to re-map keyboards — have a look at . However, it's a minefield that could leave you with a non-functioning Mac.
I'd seriously recommend that it would be quicker, easier and cheaper simply to replace the keyboard with one built for the Mac!
Sorry!
Archie

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

I locked my volume level, and forgot the code to unlock it, so how can i get my volume back to normal without a code??

About four years ago I set the volume lock on my ipod to half way up. To do that, you enter a four number code. I decided to change the code one day, and then ever since then i can not remember the code. I would like to remove my volume lock from half way, so that i can turn it up to max volume, but to do this it is asking for the old four number code, which i don't remember! So how can i take this volume lock off without knowing the code??? I tried to reset all settings, but that did not remove the volume lock. Please help me figure out how to achieve full volume level!
Thanks.

See here: Restoring iPod to factory settings
B-rock

Volume levels in logic pro X keep jumping up to +5.2 and +5.0 by itself?

Volume levels in logic pro X keep jumping up to 5.2 and 5.0 by itself.There are no plugins nor automation activated on tracks? how can i stop the track levels from jumping?
What do i do to avoid this?

I and the same problem and neither of these fixes solved it. Defintely not a controller problem as guessed.
The problem was solved by going to the step editor - similar to automation - but more hidden, and also taking place in the track at a point that I had trimmed out that heppened before the beginning of the composition.
I solved the problem by going into the step editor of the track and deleting the bar in the volume track that kept setting it, and not showing up as an automation curve.
I found this problem infuriating ,I really hope this solution helps.

Pan settings and sometimes volume levels change during playback

pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

E71 and Parrot CK3000 Evolution volume levels

Similar Messages

Maybe you are looking for