E71 - Auto keylock not working at times

Auto keylock doesn't kick in at times. Have you noticed this issue?

i think i have. what i do is that if i know i wont be using the phone for a while, i will lock it myself. either way it was locking too fast for me so i changed it to lock each 15 minutes or so. if i was tucking it in a pocket then i would lock it manually.

Similar Messages

  • AUto attendant not working

    Auto attendant not working .....
    If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
    Is there Option to set
    Please press the extension which you want to Call ...
    Eg: if i press 222 that time it should ring the 222 extension
    Please help this is the first time i am working on this stuff
    If i chnage the scrpt file then i can hear auto attendant not initiazlised..  please find the attched screen shot and back file for more details.
    Best Regards
    Shabeel

    Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
    Check also the Calling Seach Space
    GW should be able to reach CTI Route Point and CTI ports partition.
    If you try other extension it works fine?

  • Auto dial not working

    Auto dial not working
    I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
    In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
    Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
    I must have inadvertently changed some setting.
    Skype works, MagicJack works, but I must dial the number manually.
    I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
    To say the least, I am frustrated because it must be something obvious. (to everyone else!)
    Any ideas as to how to how I can get it to dial automatically again?
    Thanks for any assistance.

    IPAD user guide for IOS 8 is available on line at apple -
    you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
    http://support.apple.com/manuals
    Handoff is only for using with multiple devices - Iphone/Ipad/ipod
    This is the bit in Handoff on Phone calls
    Phone calls
    If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
    Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
    Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
    You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

  • Office 2013 Auto Archiving not working

    Dear Sir / Madam,
    We are using MS OFFICE 2013 with Windows 8.
    Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
    We have defined all the steps required to do Auto Archiving.
    Your help is required in this since we have tried all the options.
    Paloli Manoj

    Hi,
    What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
    If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
    http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
    For more troubleshooting steps, please refer to this:
    http://www.howto-outlook.com/faq/archivenotworking.htm
    Regards,
    Steve Fan
    TechNet Community Support

  • How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , a white window appears .

    How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , the window appears white .

    By default Firefox opens a blank page for a new Tab, there is no setting to change that action without installing an add-on.
    New Tab Homepage extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/777

  • My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    Hi eleni_georgia,
    Welcome to Apple Support Communities.
    The article linked below provides some additional tips that will help you resolve the audio issue that you described.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers!
    -Jason

  • Auto brightness not working in ios6

    I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

    Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
    I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
    I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
    Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

  • In 5s, personal hot spot does not work from time to time. Not detected

    In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.  

    Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
    also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

  • Why is the "plug in" not working every time i try to stream?

    Why is the "plug in" not working every time i try to stream?

    If you own "Sausage Fattner" you'll find a update in your email that solves this problem.

  • Auto keyframe and auto transition not working

    auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

    In order to use these you need to have the autokey frame and transition selected
    OFF   ON
    and have the first key checked then move the playhead to the new position and it should add the transition.
    Did you try this and it is not working?.

  • Auto brightness not working on iPhone 5?

    On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
    Anyone else have this problem of the auto brightness not working?

    There is nothing wrong with the auto brightness.
    When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
    If you have the slider too high the brightness cant reduce because youre not letting it.
    Set your brightness at about 25% and you'll see what I mean.

  • TableView : sort = "SERVER" ...does not work for "TIME"

    Hi,
    TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
    But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
    Note
    The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
    The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
    Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
    Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
    Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
    Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
    Form: DO_REQUEST of program CL_BSP_PAGE===================CP
    Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
    Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
    Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
    Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
    Thanks and Regards,
    Bindiya

    Welcome to SDN.
    This problem and solution to it is exaplined in the following oss note number.
    <a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
    Regards
    Raja

  • My iphone5 carrier not working som time showing no service

    my iphone 5 carrier not working som time showing no service

    It isnt carrier problem. I had 3 months old iphone 5, no problems with network but had light leakage, got replacement 2 days ago and with same sim card there was always no service. Went back to apple store and they will give another replacement tommorow or monday.

  • E71 camera flash not working with auto focus

    I have using E71 from last 2 months . As of now i came to know its auto focus option by pressing '2' button. Before flash was working fine with auto focus option but from last 2 days flash light is not working with auto focus option and pictures clicked comes to be very dark. Can anyone suggest how to sort out this problem.

    sir can you tell why my e71 camera flash is not working .i have tried the hard reeset also.flash is also on .please tell because i dont want to go ot the nokia centre and i dont want to tell this to mu father

  • Windows Server 2008 R2 DNS Entry Auto remove not working

    Dear All,
    I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
    Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
    how to solve this ?
    pls help
    Sunil
    SUNIL PATEL SYSTEM ADMINISTRATOR

    Hi,
    This is a rather common problem when configuring Scavenging and Aging of stale DNS entries.  This has to be set in two spots, not just one as so many admins have difficulties with.  It isn't very obvious. 
    Aging and Scavenging must be set on both the DNS Server and on the Zone
    that you want to clean.  In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered.  Static entries are ignorned.
    First step: 
    To set aging and scavenging properties for the DNS Zones using the Windows interface           
    Open DNS Manager.
    In the console tree, right-click the applicable DNS server, and then click
    Set Aging/Scavenging for all zones.
    Select the Scavenge stale resource records check box.
    Modify other aging and scavenging properties as needed.
    Second Step:
    To set aging and scavenging properties for the DNS Server using the Windows interface           
    Open DNS Manager.
    In the console tree, right-click the applicable DNS server, and then click
    Properties.
    Select the Advanced tab,and then enable Enable automatic scavenging of stale records
    check box. Once done, specify the Scavenging period (That is recurring
    interval for Scavenging on a DNS server)  and click on OK
    That will do it.  Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
    off, nearly brought the company to a halt. 

Maybe you are looking for