E71 Built in Voice Response Messages
How do I change the built in voice message on my E71 e.g. to let callers know I am temp unavailable ?
Solved!
Go to Solution.
I think that the built in voice it's for reading messages. For you it's a simple but effective aplication on nokia store: advanced call manager with this features:
Busy tone – send a busy tone to callers. Avoid acting rude by hanging up.
Busy tone and SMS – add a personal touch to sending a busy tone: inform your callers with pre-assigned SMS replies.
Mute the ringer – let the calls through with a muted ringer. More discrete, and keeps you undisturbed.
Divert calls – forward incoming calls when you are unavailable.
Play a personal greeting (Nokia devices only) – set your own answering machine and record the caller’s message straight onto your phone, avoiding having to call your operator to check voice messages
I also have it and i'm very pleased with this app.
Similar Messages
-
Processing response message in webservice
Hello,
I'm quite a newbie with webservices and this question may seem quite stoopid but I'll ask it anyway...
I have built a small web service with JAX-RPC. I know that, with the ServiceLifecycle I can process the whole request message, SOAPHeaders and all, in the webservice itself. Does anyone know how can I process the outgoing response messages SOAP headers? I mean other ways than message handlers...
Thanks in advance!
RamiYou may wantto post this in the JWSDP community : https://jwsdp.dev.java.net/
-
Missing response message in Idoc - WS scenario
Hello
I 'm missing a response message in the follwing scenario:
Idoc-> XI -> Web service (SOAP)
A Matmas idoc is sent from R/3 to XI. In XI the Idoc is
mapped to a SOAP message and sent to a web service.
The Message Interface for the SOAP call is synchronous
and has a PushMaterialSoapOut and a PushMaterialSoapIn
messsage, which is defined in the WSDL from the
web service and imported into XI Repository.
Everything is working fine but I do not get the response
message. The web service has sent the response message. I
have traced the firewall logs and i have seen the
response.
What is wrong? Is it basically possible to have a
scenario like this?
The message must have arrived somewhere, since the web
server does not throw an exception. But where is it?
Thank you in advance
ThomasHello Stefan
>Scenarios with IDOCs are always async. Therefore you
>cannot have a response.
Ok, so I have to use BPM.
>How do you want to process the response? What should
>happen in the sender system?
I was thinking about an ALEAUD idoc which is sent back
to R/3. Therefor I have created an synchronous message
interface with the MATMAS idoc as outgoing message and an
ALEAUD as incoming message. Accordingly I have a message
mapping for the response message.
An other reaction to the response message could be to set
the message to status failed. But this is the next issue.
>In some scenarios you might use a BAPI instead of an
>IDOC for synchronous message processing, but this
>depends of many circumstance depending ofyour business
>requirement.
The process in SAP R/3 is fixed. To move to BAPI is not
an option.
Regards
Thomas -
I accidently deleted a voice mail message. Is there any way to retrieve it? I was told I had to reset my password since I entered the wrong one three times.
Depends on your carrier. You'll have to contact your carrier for how to do this. (This is for AT&T: http://www.att.com/esupport/article.jsp?sid=52649#fbid=WLddP4KyTAu.)
-
I’m looking for a voicemail app that will automatically switch over after normal business hours and play an alternate voice-mail message. Does this currently exist?
Voicemail is through your carrier and on their equipment.
It's function and features is set by them, not your phone. -
Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format. -
WCF-Custom performance problem with large response messages
We're trying to debug a performance issue in Biztalk 2013 when using a WCF-Custom adapter to call en external WCF-enpoint.
From a Biztalk orchestration we're calling en external WCF-service to retrieve an xml message sometimes containing a lot of Base64 encoded data. The response message can be up to 10Mb in size. The send port is very slow in retrieving the response
and a 10Mb message can take up to 3min to retrieve. For comparison we've made a console program with the same service reference and binding as the Biztalk adapter uses and we can retrieve the same message in about 3 seconds.
The WCF is using binary encoding over http and we've set the maxMessageSize, maxBufferSize and maxBufferPoolSize to Int32-MaxValue. We realise that using Biztalk there will be overhead because the message is put into the message box but we're unsure how
to improve the performance of the send port.
Any suggestions?Hello,
There are certain Optimization you can do with your BizTalk.
1)The first thing that I would do is to check the BizTalk SQL server jobs are running correctly
(SQL Sever Mgmt Studio –> SQL Server Agent –> Jobs). Lookout for the jobs with the word “CleanUp” in them.
2)Another check that you could do is to verify the entries in the Spool table
(Database[@Name='BizTalkMsgBoxDb']/Table[@Name='Spool']). Ideally, the number of entries should not be HUGE
(as in not over 100/200 entries)
3) Create seperate host and host handler for your send Port.
4) Set The MaxReceiveInterval from adm_service(BizTalk Management DB) class table 100 ms from 500(By default).
5)Increased the Throttling Settings Internal message queue size to 1000 from 100 In new Application Host.
6)Set the Maximum number of messaging engine threads per CPU to 40 (By default it is 20).
7) Add Max connection in your BTSNTSVC.exe.config file
<system.net>
<connectionManagement>
<add address
= “*” maxConnections = “300” />
</connectionManagement>
</system.net>
For other setting you can look for BizTalk Optimization Guide
http://www.microsoft.com/en-ca/download/details.aspx?id=10855
Above setting are for generic performance enhancement purpose.
Note: You can verify through Orchestration debugger or Orchestration tracing how much time send port is and pipeline is taking to publish the message to Biz Talk again .
These will give you better picture what more settings you need to apply .
Thanks
Abhishek -
i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this -
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
P.S: We use windows authentication in our environment.Hi IMSunny,
It seems you have solved this issue based on your another post.
http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
Thanks
Daniel Yang
TechNet Community Support -
Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
ThanksHi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
<serviceDebug
includeExceptionDetailInFaults="true"
/>
<serviceMetadata
httpGetEnabled="true"
httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx -
I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
Does anyone have any suggestions on how to solve this probelm?
Here is the error:
The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
Hi,
I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
{"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
I do have windows Activation Features installed and I am using .Net Framework 4.
Thanks
Sofia Khatoon -
The content type of the response message does not match the content type of the binding
I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
'<!DOCTYPE html> <html> <head> <title>Runtime Error</title>
<meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size:
.7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
} pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight:
bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and (max-width: 639px) { pre { width: 440px; o'.
It is not written using WCF ... any workarounds?!
Thank you.Hi Raj Krish,
For ASP.NET related issue, please post to the following forum:
http://forums.asp.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
In Synch comm, what happens to response message if sender fails?
Hi All,
I have came up with the following question:
I have a synchronous scenario type: WS -> PI -> Proxy.
Lets say that the external system is able to consume the Web Service, and send the data to PI, and from there to the SAP ERP. SAP ERP starts processing the message (calling function, BAPIs, etc). During that execution the external system for some how cuts its connection (session) to the WS that PI is exposing.
What will happen then?
In SAP ERP I will have some processes that were executed, the response message will be sent back to PI, but not to the legacy system. So the data will not be consistent, as ERP was able to perform its process but the Legacy system will never know that these were done, so I will have an unbalanced scenario.
One of my questions is, will SAP ERP know that the connection between the legacy system and PI was cut, and there for ERP will stop, cancel or not perform its processes?
If the response message was sent back to PI by the ERP, but this message could not reach the legacy system. How can we let know the legacy system that ERP did all of its processes and that it should "update" their data according to the response message sent by ERP?
As we all know, we can not re-process a synchronous message. So, what will be the best way to mantaining the consistency of the DATA between the two systems (ERP - Legacy)?
Thanks and regards,
FelipeOne of my questions is, will SAP ERP know that the connection between the legacy system and
PI was cut, and there for ERP will stop, cancel or not perform its processes?
There is a possibility of triggering an alert when your Target system is down (i suppose this is what you mean when you say connection is cut)....the udf can be implemented in a mapping.....just check the blog:
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
from the blog:
We can use this code in the Exception Handler block of the try u2013 catch block of the code to
publish the JMS message, and, whenever the JMS service was down, the Exception handler block is
called and the Alert is triggered to the Operations Support team.
check if this suits your requirement
Regards,
Abhishek. -
Hi there,
I am trying to publish a file from SAP as web service using XI and SOAP Adapter.
I am using ABAP proxy to get the data into XI.
Designing and Configuration in XI has no problems because when i use File adapter the data is trasmitted to FTP server.
But when I used SOAP Reciever adapter I am getting following error in RWB
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Error during parsing of SOAP header.
<b>Scenario</b>: SAP ABAP Proxy -> XI -> WebService. Asynchronous.
<b>SOAP</b> Receiver adaptor.
<b>Target URL</b> http://<host>:<port number >/sap/xi/engine?type=entry&version=3.0&Sender.Service=SAPDC2653&Interface=urn:bzttest:00:hsa:test%5EOB_MI_BZT_TEST&QualityOfService=ExactlyOnce
Do not use SOAP Envelop is checked.
<b>SOAP Action</b> http://sap.com/xi/WebService/soap1.1
What i am missing here? How should I solve this problem?
Any help is appreciated,
Thx,
YogiSay there's a bapi/rfc that you want to call on an R/3 backend (e.g. 4.6c). On it's own, the R/3 system cannot expose the rfc/bapi as a web service, but XI can. So in this case, the scenario would be:
WS client -> XI -> R/3
When XI "exposes" a web service, it is exposing a service for a receiving system (in the above example, the R/3 system). XI itself does not provide or contain the service implementation. When XI exposes a web service, it is always done via the <b>sender</b> soap adapter (i.e. if soap adapter is used). Receiver soap adapter is used to call or consume an actual web service from an external application.
Regards,
Jin -
Soap Receiver Adapter - No Response Message
Hi, I've got the following scenario: Idoc - XI - Webservice. I've imported the WSDL from the .NET webservice and used the input and output messages in a syncronous interface. I've setup a SOAP Receiver adapter with the Webservice details. Everything is working fine when I call the webservice and the data is received 100% at the target system, but I am not getting ANY response back on XI.
RECEIVER SOAP ADAPTER Audit LOG:
2008-01-24 16:41:57 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-01-24 16:41:57 Success MP_LEAVE1
2008-01-24 16:41:57 Success The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
2008-01-24 16:41:57 Success Acknowledgement creation triggered for type: AckNotSupported
2008-01-24 16:41:57 Success SOAP: completed the processing
2008-01-24 16:41:57 Success SOAP: continuing to response message 83638fb0-ca8a-11dc-b36c-00145eed9500
2008-01-24 16:41:57 Success SOAP: sending a delivery ack ...
2008-01-24 16:41:57 Success SOAP: sent a delivery ack
2008-01-24 16:41:57 Success The message status set to DLVD.
2008-01-24 16:41:57 Success Acknowledgement sent successfully for type: AckNotSupported
Has it got anything to do with the "AckNotSupported" type? Is "AckNotSupported" the default setting for the receiver SOAP adapter? If so, where do I change this setting?
When I call the webservice with the exact same input using a standalone tool, I get the response message back 100%. Any help will be appreciated.
Thanks
RudiHey
you are confusing between a response and an acknowledgement.
response and acknowledgement and not one and the same thing.
response is basically used when you send some query to the receiver system and expect a set of value(s) for your query.for e.g sending a query to a Database(JDBC) or SAP system(RFC)
and acknowledgement is just a notification that the message was receiver by the receiver correctly,it does not returns you a set of value(s).
now coming to your question,ALEAUDIT IDOC is generated when an IDOC is posted,since in your case you are not posting and IDOC,instead your are sending it ,i m not sure if ALEAUDIT will be generated or not,one thing that will come to your rescue is that every receiver SOAP adapter expects a HTTP response(irrespective of you explicitly asking it or not).
a HTTP 200 means that messages were posted successfully,and HTTP 500 means application error,get this HTTP response and send it back to the SAP system,most probably you would need to use BPM for this.
Thanx
Aamir
Edited by: Aamir Suhail on Jan 24, 2008 11:26 AM -
SOAP : response message contains an error Application/UNKNOWN/APPLICATION_E
Hi All,
I am working in a Proxy to SOAP synchronous scenario. Message is processing successfully through IE but i am getting the below error in receiver (SOAP) communication channel.
SOAP : response message contains an error Application/UNKNOWN/APPLICATION_ERROR.
Please suggest what will be possible way out to resolve this issue.
Thanks,
Priya RanjanDear Priya
Have you configured Fault Message for this scenario.
This kind of error is generally thrown by the end target system where the message is not processed succesfully due to some error in there system.
Sourabh
Maybe you are looking for
-
Superfish appears on most of the shopping sites I use since I upgraded to the latest version of Firefox. I have tried to investigate ways to remove it (since it is behaving like malware even after getting past Norton) but I am unable to follow the st
-
JRE 1.4.2_07 only works for the installer user
I installed JRE 1.4.2_07 today for a web based app my company uses on my development XPPro PC. The web based app launches the JRE fine and works fully, when logged in as the user who I installed the JRE under. If I logon as another user and try to ac
-
I still use my macbook from late 2007. Processor 2.2 GHz Intel Core 2 Duo Memory 2.5 GB 667 MHz DDR2 SDRAM Graphics Intel GMA X3100 144 MB Software Mac OS X Lion 10.7.5 (11G63) I know the graphics on these machines suck. I just want some good mul
-
Best practices for placing images in epubs
Okay, I've read the books, I've watched the tutes and I'm still at a loss on the best way to add images to InDesign 5.5 documents that I will convert to ePub. The images are created in Photoshop at 300 dpi and sized at 800by600. And yet when I place
-
How can I see my ratings when I view
I'm almost certain that as I used the viewer and the Adjustments Inspector that there was a time that my star ratings would show up below my picture. Currently, while using the viewer (with the Adjustments Inspector open) I can hit a number 1-5 and i