E71 cable connectivity
when i connect my phone to pc through data cable .In phone the options pops out.but in comp it does not show anything......it doesnot work with niether of the options...neither mass storage nor pc suite.nor modem...but if i connect my e63 y cable works properly...n E71 could not connected by any of the data cable.
PLZ HELP ME OUT
regards
FAIZO1..
Hi rudi2001 .
Try reinstall PCSuite and NSU .
Also you may try install USB drivers for cable .
Nokia_Connectivity_Cable_Driver
http://europe.nokia.com/A4144937?lang=English
Similar Messages
-
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
How can I get iMovie to recognize my Panasonic PV-GS400 as a device so I can import video to my iMac? I have a FireWire IEEE 1394 400 cable connected to the camcorder. Since my new iMac has only Thunderbolt ports, I purchased a Firewire 400 to 800 adapter to connect to the cable. I also purchased a FireWire 800 to Thunderbolt adapter to connect to the computer. My camcarder is still not recognized.
I would suggest that you try a 9 pin to 4 pin Firewire Cable along with the Firewire to Thunderbolt adapter.
Those Firewire 400 to 800 adapters do not seem to work well with iMovie.
The 9 pin to 4 pin cables are available at reasonable prices here, for example.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2 -
I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider.
My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house. The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable. That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do. It's not really practical to try and move the cable connection point either.
My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power. The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with. Apple if it will do what I want.
Thanks for any help out thereI thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
I'm sure that the guy at the Apple shop means well, but he is not correct.
While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal. -
I currently have a motorola surfboard cable modem/router (dual N) that works for all our wireless devices (PCs and MACBOOK) except that our ipad 2 which drops video streaming in the livingroom (works great in the office and bedroom). I'm hoping to purchase a new 5th gen airport extreme and set it up in the living room for the ipad 2 as a repeater/bridge (I think that is the same function) but don't want to have a ethernet cable connecting the motorola to the airport extreme. Is it possible? How? Since the ipad 2 works in other rooms, I don't think it is the ipad 2.
Sorry, but Apple products would not be compatible with your Motorola modem/router using wireless only.
If you need to do this using wireless only, you might want to check with your Internet service provider to see if they have a Motorola product that would be compatible for the purpose that you need.
If you are able to permanently connect the AirPort Extreme to the Motorola modem/router using a wired Ethernet connection, the AirPort Extreme could be configured to provide more wireless coverage that way. -
Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me. -
"No Cable Connected!" message when trying to connect new Benq GL2750 LED to my new Mac Pro with Mini Display to HDMI adaptor. Anyone know how to solve the problem??
Mini DisplayPort cables are diabolical.
You must push them into the socket until essentially ALL ot the metal part disappears. -
I was updating my iPhone 4S to the iOS 7 system. During update my phone froze. It's stuck on insert USB cable connect to itunes screen. I've already tried turning my phone off holding Home key while inserting my cord into phone and nothing worked. I've tried DFU mode and that wont work either. What the heck do I do now? So annoyed with this.
I've also restarted my computer and still nothing.
-
Network bridging two cable connections. Worth it?
I tend to be a bit (okay excessively) power hungry. My apartment complex provides a free shared wireless cable connection. I found it to be not reliable with uptime and was forced to get a dedicated cable line for myself.
Then I had this thought: when there are times when this wireless and free connection is up and running, would it be worth it to bridge the two connections on my desktop? One would be wired, the other wireless. I haven't yet purchased the wireless card since I'd like some input on this first. Both are cable connections at around 6 mbps (Comcast). I'm fairly savvy with networks however not so much on this concept of bridging in home computing. I use the Internet for large downloads, FTP, SSH, and web design, and I'm just power hungry , so I'm curious what the bandwidth and speed increases would be on this.
My desktop is very powerful and new, if that were to at all be a concern. Any thoughts, experiences, or input on this?
Last edited by jskier (2007-08-15 12:22:37)Lone_Wolf wrote:
It sounds like you want to combine both physical nics into 1 virtual, this is called bonding.
Download the kernel sources and check Documentation/networking/bonding.txt .
I've done a bit of searching and it seems that downloading large files , ftp and such don't benefit from this as they only can make one connection.
Everyhting that uses multiple connections like p2p should benefit from it.
If you're going to use this, you should consider installing a downloadmanager like prozilla or aria / aria2.
Hmm, me thinks I'll play around with it, thanks! -
Can't figure this out- cable connection vs wifi connection
Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan SchmidtAm having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out. -
What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate
It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks! -
I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.
No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.
-
Can I use my Time Capsule 1TB as an external hard drive to store my music library but with a cable connection(Ethernet or USB) and not Wi-Fi.
Yes, with the following warnings.
1. A 1TB TC is a Gen3 or earlier and can die at a moments notice.. So backup is essential.
2. A Gen1 or 2 is slow.. even over ethernet they were processor bound and so transfer speeds are not great.. a USB2 plugged into the computer will be faster. Gen3 is about 50% better as the processor was upgraded by 50% speed.
3. TC has no built in backup.. TM cannot backup network drives.
4. TC is designed to spin up slowly and spin down quickly.. you will have issues with itunes constantly losing the library.
5. You cannot use USB to the TC.. it is a network drive. If you want to use USB directly on the computer buy a USB drive.. but buy as fast a drive as your Mac supports.. Thunderbolt>USB3>FW800>USB2
USB3 is cheap and very good.. but the port is only from 2012 so check your Mac specs.
Thunderbolt whilst being super fantastic and around since 2011, has a bank account clearing price although there are Thunderbolt to esata converters.. for around $160. esata falls between usb3 and fw800.
FW800 from WD is no better than USB2 but other brands it can be twice the speed of usb2.
USB2 is the worst. But still faster than a TC. -
HDMI cable connected from new HP Spectre i5, 4Gb, 128Meg, (WIN 8.1) to TV, picture fine but no sound
Hi.. HP spectre G4X24PA#ABG, bought a few days ago, links in via HDMI cable to Sony HD TV - picture fine but no sound.. tried Control Panel, Sound etc but no HDMI sound to click and make say default?? IDT High Definition Audio Codec listed but no connect to HDMI - suspect drivers not up-to-date?? But HP assistant says all is up to date?? Have looked on web - many answers for Win XP/Vista etc but I am running WIN 8.1- can always connect external speakers or use Y-connector but I think this single HDMI cable SHOULD work?? Any help much appreciated - first post so please treat me gentle (and as a new silly nerd head please... i.e simple replies please...)!!
This question was solved.
View Solution.Solved this??. does appear to be the order in which the equipment is connected... first, HDMI cable connected to TV and computer, then switch on computer, then switch on TV.. seems to work with picture and sound coming from TV each time so far... (Plus, on one occasion I had to check "mute" was off!!)
-
Mac Mini won't print via ethernet cable connected to airport extreme
Hi. Thanks for your input in advance. Am about to start throwing things around. I have an Airport Extreme based network which is working fine. The printer is a new HP L7590 which connects to the network with a USB cable connection to the Airport Extreme. Those with laptops and wireless cards are able to print no problem. However my Mac Mini, a 1.25 GHz PowerPC G4 is connected to the printer using a ethernet cable connected to the Airport Extreme. All was working perfectly until I upgraded from Panther to Tiger. I am now running 10.4.11. Now the Mini will not print. The jobs keep stopping. I have removed the printer and try to add it again. The print browser page finds the printer okay and lists it as connecting via Bonjour, but when you tell it to add it, it starts 'searching for new drivers' and then 'gathering printer information' and then it stops responding and I have to force quit it. Any suggestions?? I have already tried all the online mac help suggestions.
Actually it transpires that the G4 laptops are not printing either now.
Maybe you are looking for
-
Since downloading ios5 on my iphone 4 a few days ago, the capacity guage in itunes shows "other" as over 21Gb and i can no longer fit any music on my iphone. How do I get rid of the other stuff? capacity available on 32 Gb iphone is 28.49Gb i previou
-
Error in creating Table Maintenance for TABLES: J_2IRG1BAL ,Dump error show
Dear Gurus I have Created one Table Maintenance for TABLES: J_2IRG1BAL , 1) I have take function group as same as table name like J_2IRG1BAL 3) Authorization Group &NC& 4) Authorization object S_TABU_DIS 5) Function group J_2IRG1BAL 6) Package J1I5
-
I have lost my WhatsApp message history and now when I start a conversation, I get the message "Message History Disabled: no Media Card found". Current chats are kept but as soon as I restart the device, they are lost. If I go into the Files part of
-
Time machine not working since Safari 4 upgrade
I had all kinds problems installing the Safari 4 upgrade (from 4beta) a couple of days ago - it knocked out everything that talks to the internet. I finally got that sorted by reinstalling, but since then TM has been unable to complete backups. I get
-
Passing dynamic internal table to FM using RFC
Dear All, Is it possible to pass a dynamic internal table to a function module using RFC? If it is possible than how do i achive this?