E71 constant disconnects with bluetooth

My previous post was moved to "troubleshooting tips" but thats not the case, the problem is with the E71 phone itself. The blue ant headset i have works fine with all other phones
It contantly disconnects with the E71 , the problem is the phone. What can we do to fix the phone?

Sounds like a vista problem, they are breading like rabbits it seems. The WRT54G is a good router, I had one for years with no problems. What type of wireless card do you have in the pc, and is it PCI or USB

Similar Messages

Mac - Mavericks automatically disconnect with Bluetooth speaker device

I am using a Mac with Mavericks OS , I don't know why but since the day I update to Mavericks my Mac always automatically disconnect with my speaker,which I use Bluetooth connection with the Mac, after I stop the music or movie for 10 seconds or 1 minutes, and I tried to reconnect the Mac with my speaker again but when I stop the music it disconnect again . Hope you guys can help me solve this problem. Thank you.

same problem here!
using:
Bose Soundlink Mini
Macbook Pro 13-inch, Early 2011)
OS X 10.10.1

Constant disconnects with Linksys BEFW11S4/Westell/Bellsouth Ultra DSL

I recently upgraded to the 6mb DSL service from Bellsouth. Previously I had the 3mb. Anyways everything was fine for sometime even with the faster service. The last few weeks I have been having constant disconnects(several a day). Naturally the wireless lite on my Linksys BEFW11S4 goes out each time. I then un-power the router then re-power and I'm off and running again. I am using a westell modem. Bellsouth tells me that its not them since i do have an internet coneection and referred me to Linksys. After several live chats(due to disconnects and then having to start tellin my issue all over again) they had me upgrade my firmware. Well did that and problem hasn't changed. I've played with the different router channels and they don't seem to help as well. Bellsouth told me that I had a static ip, so I tied setting up router that way, but then i got no connection. Unil reently everything was fine, this just started! Any help is greatly appreicated. My 17 yr old daughter is going through internet withdraws upstairs!

If you are on DSL using a Westell Modem; make sure you ask your ISP to bridge the Modem first and use the PPPoE fucntion on your router. Change the LAN IP of the router to something else like 192.168.2.1 so it won't get a conflict with the IP of the Westell. Then if you are on cable, you can try adjusting the MTU size to 1492, 1400, 1300, or 576 then check which value would get your connection stable. You can reset your router right after you upgrade it also, then reconfigure it again. Hopefully yell be fine after that!
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

Constant disconnects with wireless router.

Hello and thanks in advance for any help you can provide.
I have a WRT54G wireless router with speed booster. I am experiencing constant disconnects when online gaming. I have one PC - running windows vista 64bit ultimate. This computer is running a wireless connection which is secured and is about 10 feet from the router through a wall.
I also have an xbox 360 with a wired connection. It doesnt seem to have the same issues but does become a bit sluggish at times.
I have called linksys and they instructed me on how to upgrade to the latest firmware. I think it is 7.5.0 or something. Still having issues. Cox (my ISP) has been out and says I am getting a constant 2mb download.
Any help would be appreciated. I have talked to linksys again they have me pull up cmd and run a test which shows me at a 4-10% packet loss. They say this is an acceptable rate.
Still the problems continue. If anyone can help I would be very greatful. If you need more info just let me know and I will provide whatever I can. Thanks!!!
Message Edited by madmike6537 on 11-26-2008 03:16 PM

Sounds like a vista problem, they are breading like rabbits it seems. The WRT54G is a good router, I had one for years with no problems. What type of wireless card do you have in the pc, and is it PCI or USB

Constant disconnecting with my WRT120N

Hi
I have a problem with my wrt120n. I'm having a constant disconnecting problem.
I don't have any problem with the wireless computers connected to the router but the wired one keep geeting disconnected. I'm loosing the internet many times a day on thiis one. Like I said the wireless is ok.
My old router on my computer ( wired) was working well before I installed the wrt120n.
Can someone help me?
Thank you!

This is a problem of the Linksys/Cisco WRT120N product itself. The team from Cisco/Linksys is very irresponsible. Why i say so ?
The 802.11n signal is not certified to be supported but yet they have included this support in this router. By doing so, it causes this related problem that most consumers must be facing now or in the past. It is a shame that such a big company operates and sell their products this way.
The solution: It does not have anything to do with MTU, beacon interval etc.... Just use Mixed BG wireless signal instead of
Wireless N only when you goes to Manual Setup. I am sure that this solves the problem.

Constant disconnects with "no PPPoE" and "no valid IP address" errors

I have AT&T DSL and have an Airport Extreme connected to a Speedstream 4100 modem. My Internet connection has been fine for nearly a year with the AEBS but for the past couple weeks has been disconnecting so frequently that it's almost become useless. The problems reported by the AEBS are: PPPoE Server (no PPPoE server found) and Internet Connection (AEBS doesn't have a valid IP address). It's always these two problems reported.
Restarting the AEBS gets me connected again, and sometimes the connection will come back on its own, but only for a short while. I don't know how to troubleshoot this. Help! Here are my AEBS settings:
Radio Mode: Automatic
Radio Channel Selection: Automatic
Wireless Security: WPA2 Personal
Use wide channels: Checked
Create a closed network: Checked
Use interface robustness: Unchecked
Sorry, I'm not a network guy so forgive me if I've omitted some important information. Below the log from a recent bout of connects and disconnects:
Jun 19 10:04:06 Severity:5 Disconnected.
Jun 19 10:04:09 Severity:5 Binding added for udp, 0.0.0.0:32816 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:04:09 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:06:40 Severity:5 Binding added for udp, 0.0.0.0:32817 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:06:40 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:07:37 Severity:6 Parameter updated - drTY.
Jun 19 10:07:37 Severity:5 unloading current configuration.
Jun 19 10:07:47 Severity:5 Connecting via ethernet (user "[email protected]" service "AT&T DSL Connection").
Jun 19 10:07:47 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 19 10:07:47 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jun 19 10:07:47 Severity:5 Rotated CCMP group key.
Jun 19 10:07:47 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:07:52 Severity:5 (WAN) link state is Up.
Jun 19 10:07:57 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:07:57 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:08:02 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:08:04 Severity:5 Associated with station 7c:6d:62:a2:dc:0c
Jun 19 10:08:04 Severity:5 Installed unicast CCMP key for supplicant 7c:6d:62:a2:dc:0c
Jun 19 10:08:06 Severity:5 Connection accepted from [::ffff:10.0.1.2]:61426.
Jun 19 10:08:08 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61428.
Jun 19 10:08:08 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61427.
Jun 19 10:08:13 Severity:5 Associated with station 00:24:36:90:4e:f6
Jun 19 10:08:13 Severity:5 Installed unicast CCMP key for supplicant 00:24:36:90:4e:f6
Jun 19 10:08:17 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:08:18 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:18 Severity:5 Binding added for udp, 0.0.0.0:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:08:19 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:20 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:22 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:26 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:27 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:08:28 Severity:5 Binding added for udp, xxx.xxx.xxx.xxx:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:08:32 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:08:32 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
Jun 19 10:09:09 Severity:5 Disconnected.
Jun 19 10:11:32 Severity:5 Initialized (firmware 7.4.2).
Jun 19 10:11:34 Severity:5 Connecting via ethernet (user "[email protected]" service "AT&T DSL Connection").
Jun 19 10:11:35 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 19 10:11:35 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:11:35 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jun 19 10:11:35 Severity:5 Rotated CCMP group key.
Jun 19 10:11:35 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:11:39 Severity:5 (WAN) link state is Up.
Jun 19 10:11:45 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:11:45 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:11:45 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:11:50 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +5 seconds).
Jun 19 10:11:50 Severity:5 Associated with station 7c:6d:62:a2:dc:0c
Jun 19 10:11:50 Severity:5 Installed unicast CCMP key for supplicant 7c:6d:62:a2:dc:0c
Jun 19 10:11:52 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61481.
Jun 19 10:11:53 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61483.
Jun 19 10:11:54 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61484.
Jun 19 10:11:55 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:11:55 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:12:02 Severity:5 Associated with station 00:24:36:90:4e:f6
Jun 19 10:12:02 Severity:5 Installed unicast CCMP key for supplicant 00:24:36:90:4e:f6
Jun 19 10:12:08 Severity:7 Public address reported as xxx.xxx.xxx.xxx to 10.0.1.4:5353
Jun 19 10:12:08 Severity:5 Binding added for udp, xxx.xxx.xxx.xxx:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:12:08 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:12:25 Severity:5 Disconnected.
Jun 19 10:17:00 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:17:10 Severity:5 Disconnected.
Jun 19 10:17:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:17:49 Severity:5 Binding added for udp, 0.0.0.0:32770 to 10.0.1.4:5353 with lifetime 7200
Message was edited by: DakotaPaul

This is what the log has looked like for the past several hours.
Jun 19 17:37:49 Severity:5 Binding added for udp, 0.0.0.0:32851 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:37:50 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:57 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:05 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:21 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:39:04 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:43:48 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:48 Severity:5 Binding added for udp, 0.0.0.0:32852 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:43:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:55 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:03 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:19 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:45:03 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:49:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:49 Severity:5 Binding added for udp, 0.0.0.0:32853 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:49:50 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:57 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:05 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:21 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:51:04 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:54:46 Severity:5 Rotated CCMP group key.
Jun 19 17:57:01 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:57:01 Severity:5 Binding added for udp, 0.0.0.0:32854 to 10.0.1.4:5353 with lifetime 7200
Thanks for any help you can provide. I'm about to throw the modem and/or router out the window!

Constant disconnecting with HomeHub1

I've recently started having problems with my BT HomeHub1 and i'm stumped on what to do with this.
All devices connected to the homehub are thrown off in random intervals at the same time, and the broadband connection drops out of the list of wireless networks available in the area. But the lights on the hub remain the same, saying that it is still connected to the internet.
When I reset the homehub and let it load, it connects but then disconnects again and this problem repeats between 10 minutes to an hour.
There are no problems in my area when I checked the site
I tried the quiet line test and i've heard no crackling noise.
I tried finding that ADSL Line Status for homehub1 but there is no guide to get to that screen.
If anybody could help guide me into how to sort this out I would greatly appreciate it. Thanks.

Its most likely a fault with the HH1 or its power unit. I have a HH1 and am on my second power unit.
This guide will tell you how to get to the ADSL stats ADSL Statistics
Or for a direct link, use this BT Home Hub 1 - DSL Connection
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Constant disconnect with centurytel and wrt54gs

I set up dsl for my parents with centurytel, and linksys wireless router.
they can get online fine but seems like while they are surfing it constantly drops the internet connection. if you go to 192.168.1.1 it shows disconected and you have to either wait for it to reconnect or just hit the connect button.
I have it set up with auto dhcp and the router is set to 192.168.2.1 I have centurytel at my house and work with no problems what so ever, any ideas to remidy this?
I have gotten router update already, checked to make sure all the dsl filters are on all the phone lines. rechecked all the settings, reset both modem and router and started from scratch ect ect. is there something Im missing.
Thanks, John

Connect a computer straight to the modem and check for a static connection...If that does not diconnect you, download the firmware for your router from here , re-connect your modem==>router==>computer...
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...
Then, unplug the power keep holding down the reset button for another 30 Seconds...
Plug the power back in, and keep holding down the reset button for 30 Seconds...
Release the reset button...Click here and follow the link to re-configure your router...Connection should be fine...

Constant disconnects with flashing DSL light

Hi, my Infinity 2 connection has been unusable since last Friday 8th Feb. I get at the most a few minutes of up time then the connection drops with a flashing DSL light on the Openreach Modem.
I have tried power cycling the hub and modem, changed the cable to the socket and also relocated the modem.
I logged the call with BT on the 9th and on the 11th they marked the job as fixed, but it isnt.
This situation is very frustrating as I rely on my connection heavily for home and vpn to work but there seems to be no progress in a resolve.

I phoned the helpline in the end and the guy the other end actually did a line test and found an issue. Apparently an engineer is booked but cannot come out until 21st Feb!!! That will be nearly 2 weeks downtime. I have not had the appointment in confirmed in black or white which is not reassuring either.
Really annoyed as when I had adsl with 02 any issue (which was very rare) got resolved either next day or within the promised 3 days.
I also didn't have to chase them to resolve it and they Defo didn't mark a job as fixed until it actually was.
Not very impressed by BT at all. I have phone, Bt Vision and Infinity 2 with them so I pay them enough every month.

When booting up, the bluetooth connects and then disconnects with my trackpad 3 or 4 times then i get a gray cover over the desktop that drops from top to bottom then a window that tells me to use the power button to do a forced shutdown.

when booting up, the bluetooth connects and disconnects with my trackpad 3 to 4 times and then i get a gray sheet that drops down from the top to bottom of the desktop then a box in the center that tells me to use the power button to do a forced shutdown. wireless keyboard connects with no problem. went to the apple store and they replaced the bluetooth card. still have the same problem. removed the batteries from the trackpad, strted up and no problem connecting with wireless mouse and keyboard. anyone else experience this?

This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
http://support.apple.com/kb/TS2570
https://discussions.apple.com/docs/DOC-5282

When I disconnect my bluetooth keyboard, Safari and Notes won't open the onscreen keyboard

Hi, on iOS 7 when I've dismissed the onscreen keyboard because I'm using my Bluetooth one, but then disconnect my Bluetooth keyboard, I can't get the on-screen one to pop up again in some applications like Safari and Notes. Other applications such as Mail are unaffected.
I Googled this a lot but mostly what comes up are "x tips and tricks for ios 7" articles which don't have anything to do with the problem. The only relavent result that I found recommended I restart my iPad. OK, so I restart my iPad and now the software keyboard works in Safari... That's ridiculous! I don't even want to use my bluetooth keyboard if I have to restart the iPad every time for when I'm not using it!
This apparently affects all bluetooth keyboard models, I use a Logitech FabricSkin folio, but I also have tried it with my Apple Bluetooth keyboard with the same problems.
Tapping in the text area used to bring the keyboard back up, but no more.
Please tell me there is some alternate solution, or a gesture to bring up the keyboard, or something? This is probably the stupidest thing I've seen in iOS 7.
Thanks

I also have the same problem. If you turn off Bluetooth, the virtual keyboard won't come back, especially if you're using Bluetooth speakers as well. Heck, it even rebooted my iPad when I tried this.
I'm very tempted to dump my iPad + Logitech Keyboard if this doesn't get resolved in a timely manner.

Smart Talk not working with Bluetooth since update

I have been using Smart Talk for many months now on my iPhone. I have a bluetooth headset which I generally use.
This has worked fine (with the exception that when I get an incomming call it disconnects the bluetooth from the Smart Talk call).
But now, since installing version 1.28.0, Smart Talk is not working with my bluetooth headset at all. When I first make a call the headset is connected - I hear ringback tone. But as soon as the call is answered, the headset disconnects and the call is transferred to the iPhone itself. And the Smart Talk app does not give me any options to select the "audio source" (as it does if I make an ordinary mobile call).
As I almost exclusively use the headset, this latest update has made Smart Talk unusable for me.
Is there anyway I can get back to the previous version?

I worked out the problem... I'm using iPhone 4S iOS7
- Start BT Smart Talk from in car
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
- kill and restart BT Smart talk
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
3rd call, always no bluetooth.
It seems there is no way to select the output like with all other bluetooth devices too

Why does checking voicemail disconnect my bluetooth?

When I check my voicemail it disconnects my bluetooth and I have to manually reconnect it in order to hear my messagesthrough my bluetooth headset. Is there a fix fr this?

Well there is a fix. At least with my Jawbone, if I want to check vmail. There is a small icon that appears in the upper right corner of the vmail screen. I believe it says "sources", click it and select something other then your iPhone.

Lenovo S820 problem in call with bluetooth headset

Hello All.
I have Lenovo S820. I update smartphone to last version firmware. Information from phone:
Model: Lenovo S820_ROW
Android system version: 4.2.1
Firmware communication module: S820.V21, 2013/08/07 15:14
Build number: S820_ROW_S119_130922
I also connected the bluetooth headset. In the phone attached 2 sim: MTS(3g and 2g), BWK(only 2g)
Problem:
When I call from first slot of sim with bluetooth before whistles Lenovo S820 activate flight mode and disconnect with all providers(MTS and BWK) and after reset call Lenovo S820 turn off flight mode.
In second phone I recive call, but I can't answer a call from Lenovo S820.
I try from different headsets. this problem occur with all headsets.

try to update your firmware with the latest ROW version
[#Update]#Lenovo #S820 with the Latest ROW Version Firmware S221
http://bit.ly/1wPlj9V
Lenovo Guide and Blog http://bit.ly/1hZlF2p

5 Apple machines don't see each other with Bluetooth

I was hoping to use my keyboard with my iPad in the garden today, but they didn't connect.
To try and find out which machine is faulty I brought in all our Apple's with bluetooth: my iPad1, an iPad2, my iPhone 4, an iPhone 4S (all with the latest software) and my keyboard.
To my surprise each and everyone failed to see another machine.
'Searching' was the message on all the displays, and after some 10 minutes I gave up.
Anyone any idea what might be wrong here? I don't understand any of this.

Well, I wouldn't expect the iOS devices to see each other over BT, unless you were going through the Personal Hotspot feature. Those devices don't connect to each other over BT for any other purposes except tethering. You can connect them over BT from within certain apps for specific purposes such as transferring photos but, again, the connection is done from within the app.
So, the only real issue here is why the keyboard won't connect to the iPad. Is the keyboard currently connected to another device such as your computer? If so, disconnect it.

E71 constant disconnects with bluetooth

Similar Messages

Maybe you are looking for