E71 Different Access Points for different modes?

Hi
I have just got the E71 and think it's a really good phone. I have a question about the two different modes that the E71 can switch from and to.
I would like to be able to have a "Home Mode" and an "Away Mode".
The Home Mode would use a default WLAN connection for web and push email.
The Away Mode would use a mobile web connection from my mobile provider for web browsing and push email etc.
Is this possible at all?
I have tried changing the incoming mail connection setting on one of the modes but when I switch to the other mode the incoming mail settings are what was set in the previous mode.
Hope that made sense?
Thanks in advance

I've the same question !

Similar Messages

Access control for different user groups in APEX 4.0

Hi guys,
in Apex 4.0, is there any way to use the access control page to configure access control for different user groups?
The access control page currently only has an access control list by users with 3 privileges namely, Administrator, Edit & View where Administrator has the highest access level & View the lowest. Therefore 1 user cannot have more than 1 different privilege, however if the user belongs to 2 or more different groups then we can control what access he can have in a more fine grained manner. We also want to have more than the 3 privileges given.
Can we assign different groups to different users and let them have different privileges to be configured by page, region, process or item level?
Now Apex will create 2 tables, Apex_Access_Control & Apex_Access_Setup to store the application access control mode & access control list. It will also create 3 authorization schemes "access control - administrator", "access control - edit" & "access control - view" based on the 2 tables.
Does this mean we have to change the table structures & edit the authorization schemes to suit our usage? We are reluctant to do this because if we upgrade to a newer version of Apex then we would have to merge our pl/sql coding with Apex's updated code.
How can we auto-configure more than the 3 authorization schemes in the access control page? Is there any way to achieve a finer grain of access control based on the current access control administration page given by Apex without writing it ourselves?
We are afraid that we may have missed something on Apex access control & do not want to reinvent the wheel.

Hi Errol,
to build your own application authorization scheme around the security model supplied by Apex for administration of the Apex environment would be a bad idea.
This was never intended for authorization scheme management in custom built Apex applications, it was solely intended to control access in the Apex environment overall. The API for it is not published, and making changes to it, such as adding more roles, would run the risk of breaking the overall Apex security model. It would not be supported by Oracle and Oracle would not guarantee the upwards compatibility of any changes you make in future versions of Apex.
In short, you should follow Tyson's advice and build your own structure. As he indicated, there are plenty of examples around and provided your requirements are not too complicated, it will be relatively simple.
Regards
Andre

Btrfs with different file systems for different mount points?

Hey,
I finally bought a SSD, and I want to format it to f2fs (and fat to boot on UEFI) and install Arch on it, and in my old HDD I intend to have /home and /var and try btrfs on them, but I saw in Arch wiki that btrfs "Cannot use different file systems for different mount points.", it means I cannot have a / in f2fs and a /home in btrfs? What can I do? Better use XFS, ZFS or ext4 (I want the faster one)?
Thanks in advance and sorry my english.

pedrofleck wrote:Gosh, what was I thinking, thank you! (I still have a doubt: is btrfs the best option?)
Just a few weeks ago many of us were worrying about massive data loss due to a bug introduced in kernel 3.17 that caused corruption when using snapshots. Because btrfs is under heavy developement, this sort of thing can be expected. That said, I have my entire system running with btrfs. I have 4 volumes, two raid1, a raid0 and a jbod. I also run rsync to an ext4 partition and ntfs. Furthermore I make offline backups as well.
If you use btrfs make sure you have backups and make sure you are ready to use them. Also, make sure you check sum your backups. rsync has the option to use checksums in place of access times to determine what to sync.

Different shipping point for returns delivery

How do i assign a different shipping point for returns delivery when the material was actually shipped from another shipping point?

Hi Salag,
As our expert suggested by using 2 shipping point you can create delivery. Delivery will create based on single shipping point.
In you scenario if you want to ship the return goods with different shipping point then go with new configuration.
For Normal sales order OR maintain the shipping condition 01 in the respective sales document type OR
For returns order maintain the shipping condition 02 in the respective sales document type RE.
When comes to shipping point determination shipping point will determine based on
   Order:        SC Loading Group Plant -- Proposed S.P -- Manual S.poimt
    OR    :        01 0001AAAA -
>     XXXX             --- YYYY
    RE     :        020001AAAA -
>    YYYY
If you don't want to go with different SC then manually change the Shipping Point in Returns sales order before creating delivery.
I hope it reaches to ur requirement. revert in case of any query..
Regards
Durga Sana

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

Steps to convert access point from LightWeight mode to Autonomous mode

I need steps to convert the following access point from Lightweight mode to Autonomous mode
AIR-AP1242AG-E-K9
Regards,
Majid

Hi Majid,
The method is just hidden a little further down the doc that Scott linked (+5 points Scott :)
Using a TFTP Server to Return to a Previous Release
Note This section does not apply to Cisco C3201WMIC and Cisco C3201LAP.
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 On the PC where the TFTP server is located, perform these steps:
a. Disable any software firewall products, such as Windows firewall, ZoneAlarm firewall, McAffee firewall, or others.
b. Ensure all Windows files are visible. From Windows Explorer, click Tools > Folder Options > View > Show hidden files and folders.
Step 4 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, c1240-k9w7-tar.default for a 1240 series access point, and c1250-k9w7-tar.default for a 1250 series access point.
Step 5 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 6 Disconnect power from the access point.
Step 7 Press and hold MODE while you reconnect power to the access point.
Step 8 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 9 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 10 After the access point reboots, reconfigure it using the GUI or the CLI.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Hope this helps!
Rob

JTree: How to set different cell editor for different tree Nodes.

I have a JTree and I want to set different cell editors for different node depending on some condition. E.g. I want to set ComboBox as editor for leaf node but each leaf node will have its own set of data.
Any help or pointer?
Thanks in advance
Sachin

take there:
http://www.mutualinstrument.com/Easy/FAQ/Tree/tree.html

Can I use this as a wireless access point for my network

can I use this as a wireless access point for my network

umm... use what?
A Time Capsule? Sure. It's just like many other wireless base stations. It can run in either bridge or route mode - in bridge mode it's just like an access point linking the wired and wireless networks together.

Supported access points for the rv220w

I need to extend my wireless coverage to another building. What access points, in repeater mode, will the rv220w support? I need an AP with detachable antennas. I have an external mounted antenna on the metal building that I need to hook the AP to. Thanks!

Hi R. B, thank you for using our forum, my name is Luis I am part of the Small business Support community. As far I know the RV120W and the RV220W uses the same chipsets, so they could be used for WDS bridge setup.
For your second point the RV120W has antennas and you could remove them. Bellow you will see the review of the RV120W.
http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps10852/DS_C78-590161-00.html
I hope you find this answer useful
Greetings,
Luis Arias.
Cisco Network Support Engineer.

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

Different zoom levels for different clips in the same project?

Hi
I am making a movie with videos from two different cameras. As a result some of the clips are cut down in size to a small portion of the screen. This can be solved if it is possible to use different zoom levels for different clips in the same project. I have not been able to do this. Is it possible?
kind regards
Soren

You can scale the small clips up to the same size of the larger one... but you will get a quality loss.
Using Motion or Scale to Frame Size commands
Better to scale the large ones down to a Sequence that matches the smaller clip dimensions.

Different Cost Centers for Different Line Items in a single Reservation

Hello Gurus,
When we create a Material Reservation, we give the cost center at the header level and that cost center is accounted for each of the line items in the reservation. But when the reservation has many line items which depend on different cost centers, there is a need to enter different cost centers for different line items in the same Material Reservation. How can this be done? Please suggest.

Hi,
It's a standard restriction in SAP functionality where one reservation document can only accommodate one cost center.
You can not maintain multiple cost centres for individual line items.
You have to create seperate Reservations for each cost centre.
check below thread:
ONE RESERVATION FOR DIFF COST CENTERS
Umakanth R
Edited by: Umakanth R on Dec 8, 2011 7:53 AM

So how to specify different answer file for different install images in WDS snap-in?

hello
in WDS snap-in, in properties on server name, on client tab, we can define an answer file for unattended windows installation on WDS clients.
my question is, maybe we have added multiple images in WDS snap-in (win xp image, win 7 , win 2008,...)
now this one answer file applies to all of them ?
so how to specify different answer file for different install images in WDS snap-in?
thanks in advanced

Under the "Client" tab of WDS, you should only use an answer-file with settings relevant for the installation. This would be credentials for the WDS deployment share, international settings used during the setup and possibly also destination drive
details (if you want the installation to take care of partitioning the disk etc). The settings relevant for unattend-files used under "Client" would only be of those in phase 1 (WinPE).
However, if you would like to have specific unattend file for every installation, e.g. Win7, Server 2008, Win 8 etc, you can browse to the image under "Install Images" under the image Groups. There you can select properties for every image and
have a personal unattend-file.
hi Joel
very cool. thanks a lot, that really helped me.
best regards

Different Number range for different objects

HI Gurus
Could you please explain how can we make different Number range for different objects(O,S,P).Can we do with standards or we can go for UserExit??.
Your early Advise will be appreciated.
Thanks
Chandra

Hi Chandra,
SM31 -> T77IV : 01S -> Number Range Maintenance.
(or SPRO -> Pers Man -> Org Man -> Basic Settings -> Maintain Number Ranges)
For the subgroups
01C (plan variant 01, Object type C) Job
01O (plan variant 01, Object type O) Org unit
01S (plan variant 01, Object type S) Position
Define the following number ranges respectively.
(EX 60000000 69999999)
(EX 70000000 79999999)
(EX 80000000 89999999)
Regards,
Dilek

Different mail ID for different workflows

Hi All,
As per my knowledge if we use mail task in work flow a e-mail will be triggered from mail ID maintained for user wf_batch , is there any way to send mail through different mail iD for different workflows by using mail tasks only, not by using a separate task and using some function modules in that to send mails.
Thanks
Vinod

Hi,
I have done this once. It is not the best I admit as many things must be considered, yet it worked.
In the binding of an activity step, prior to the mail send step, I have included the calling to a custom FM.
In this FM I have dinamically changed the mail address of WF-BATCH (the address was set in an ad-hoc paramenter.
Then right after the mail send step, again in the following binding, I have run the very same FM, with different paramenters of course, to put the address back to where it was.
Corrado

E71 Different Access Points for different modes?

Similar Messages

Maybe you are looking for