E71 does not disconnect calls immediately

Does your E71 hang for few seconds when a call has been disconnected??
Solved!
Go to Solution.

I've just called myself! While listening on my landline and ending the call using the mobile it cuts off immediately, displays the length of call for about two seconds, then thats it. There is a delay if I end the call from the land line but there is a delay before the phone gets a continuous tone to signify an end of call on a land line too. Pressing the end call button ends normally with no delays either way
E71-1(241.04) RM-346 300.21.012

Similar Messages

Torch 9860 does not disconnect after ending call

Hi,
I have been having this peculiar problem with my blackberry torch 9860 smartphone for the past 1 week. After finishing a voicecall, in many situations the phone does not disconnect even if I press the end call button repeatedly. It just seems to "hang" for 30-40 seconds and then disconnect. Sometimes it dosconnects only if the person at the other end hangs up.
Kindly help out in solving this issue

Try a Battery pull please, with the BlackBerry device powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Line does not disconnect

I have a BT Studio 1500 and BT Broadband. The phone works perfectly well on all incoming calls and on all outgoing calls when the person being called picks up the phone. However when the person being called does not answer and the call goes to a recorded message, the phone usually does not disconnect properly when I put the phone down so that if I go to make another call, the line is still "live" and I have to take the phone line out of the broadband filter to get a dialling tone and, of course, my phone bill will have been charged for the time that the line was still "live", even after I put the phone down!!
Does anyone know whether this is an issue that can be easily resolved (rather than having to check the line after each outgoing call that goes to a recorded message) or will I need to get an engineer out to check the line? FYI, I have tried a difference broadband filter, but that does not seem to have helped.
Any assistance/advice greatly appreciated.

I would try another phone in place of the studio, sounds like a fault on the answering machine part of it.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

IPhone 4S does not display call log. "Recents" blank.

My iphone 4s does not record call log in the "Recents". I can not see who called me and whom I called. The list is blank.
Please help me to fix it.

Reject and Answer buttons only show up if the phone is not in standby. If the phone is in standby and /or the screen is locked, you will see swipe to answer instead.
Visual Voicemail is a carrier function. Facetime may not work with an unsupported carrier.
What country are you in and who is your carrier?

E72 does not display caller's name

I have E72 handset. Off late, I experiencing peculiar problem. It does not display caller's name (displays on the caller's number). similary when I make call to someone from contacts list, it just shows calling ....number... not the contact name.
I do not have duplicat entries in contacts list. I have placed almost all my contacts in the phone memory not on the SIM.

one memory only should be selected not both.the phones memo is best to use..
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

[svn] 3130: Fix SDK-16700: Applying a matrix to a GraphicElement does not get applied immediately.

Revision: 3130
Author: [email protected]
Date: 2008-09-05 15:32:13 -0700 (Fri, 05 Sep 2008)
Log Message:
Fix SDK-16700: Applying a matrix to a GraphicElement does not get applied immediately.
Added explicit matrixChanged and displayObjectChanged flags to GraphicElement so we can reliably track changes to those items. Changed commitXY() to set the x and y properties directly on the display object rather than indirectly through the matrix. Setting through the matrix caused any non-rotation or scale transform to be lost.
Reviewer: Deepa
Checkintests: pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16700
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

:/ - I just said I can't post this on the business forum as I have tried, it it says my post doesn't conform to the rules, yet there isn't anywhere where it breaks them. I will already be in talks with a lawyer but I was wondering if a more amicable solution could be reached first

My task bar in my iphone 5 does not indicate call forwarding (verizon is my carrier

my iphone 5 does not show call forwarding in task bar (verizon is my carrier

Settings>>Phone>>Call forwarding ON.
If it is not there, then you need to take it up with Verizon as it is a carrier feature.

My iPhone 5 does not show caller name even though the number is saved with a name in contacts

My iPhone 5 does not show caller name even though the number is saved with a name in contacts

Contact your carrier. Caller ID is a carrier feature.

Script does not get called

Hi there, I am trying to setup a quad view on my stage by
placing 4 sprites on the stage with the same 3D cast member. I then
apply a behaviour script that initalizes the 4 sprites in their
correct positions and sets up the 4 different camers as follows...
topView
perspView
sideView
frontView
... however, doing so, the script gets called only on the
first sprite and the other 3 sprites do not react with the
behaviour script. As a matter of fact, I also have a sendAllSprites
command inside the behaviour script and it does not send the
message to all of the sprites with that piticular behaviour script.
Is the reason why the behaviour script does not work on the other 3
sprites because I need a diferent 3d castmember for each
sprite?

Hello,
You don't need to place 4 sprites of the same W3D cast member
in the score.
1- Place a single occurence (sprite) of the W3D cast member
in the score
2- Create 4 cameras either in your 3D package or by code
using member.newCamera():
topView
perspView
sideView
frontView
3- Set the rect of the four cameras so they correspond to
each corner of the screen
4- Use sprite.addCamera() in order to add the four cameras to
the W3D sprite
That's all you need.
Best regards,
Karl Sigiscar.
http://www.chromelib.com

My iPhone does not receive call phones

My problem is that most of the time my iPhone does not receive phone calls. I can call, send and receive sms, mail works, wifi, everything. But most of the incoming calls are not received, therefore my iPhone is not reliable as a phone. I have updated the firmware, I have reset it several times, but nothing changed. If I make a call phone and don't switch my iPhone, the person I have call can call me back and likely I would receive the call!!??? Someone can help me to fix my problem? Thank you in advance.

Hi,
Try testing the iPhone without any accessories.
This article: http://support.apple.com/kb/HT1737 provides general tips that will resolve most issues related to making and receiving calls.
Try contacting the cellular service provider, if the issue persists after trying the tips in the article above. This article: http://support.apple.com/kb/HT1937 provides support resources for iPhone service providers.
-Jason

E71 does not connect to gps after ovi map 3.0 upgr...

Hello.
I have just upgraded my maps application and now I can not seem to connect to gps, the indicator is red. I tried settings and in positioning it says waiting for gps. Pls advise how I can use my maps again.
Thank you.

ballistictushar wrote:
Phones with free navigation
Nokia E72
Nokia E71
Nokia E66
Nokia N97 mini Gold Edition
Nokia N97mini
Nokia N97
Nokia N86 8MP
Nokia X6 16GB
Nokia 5800 XpressMusic
Nokia 5235 Ovi Music Unlimited
Nokia 5230
To find Ovi Maps for other phones visit Maps Support-http://www.nokia.co.in/get-support-and-software/download-software/maps-support/compatibility-and-dow...
How to install and setup GPS in nokia E-71.
Firstly Install Nokia Ovi Suite (advance version of PC Suite) in your respected computer.
http://www.nokia.co.in/get-support-and-software/download-software/nokia-ovi-suite
After installation of Nokia Ovi Suite go to following link
http://www.nokia.co.in/explore-services/ovi-maps/downloads?intc=ncomexpserv-fw-ilc-lft-con-na-ncomex...
Now install the the second link file into your phone, i.e., "nokia_maps_3.03_10wk11_b04_s60_3.1_rom.Nocs.sis".
After successful installation connect your phone with data cable in PC Suite (DON'T run PC suite application in your system) mode and open Nokia Ovi Suite application in your system.
Now in Nokia Ovi Suite application click on View-Go to-Maps (make sure your system is connected to Internet and your mobile phone key pad doesn't get locked, if keypad autolock period is on switch it off for that moment and your phone is fully charged, now in maps select Asia in that India and download that India Map (103 MB) into your phone.
Please Note that do not disconnect your phone from data cable else maps will not get downloaded and will not to be
transferred to your phone.
After successful installation of maps into your phone download "Voice Guidance Languages", which ever is preferred by you, if you really want to enjoy it. Like- English(UK)-with street names or in Hindi, Tamil, Urdu.
Now you are almost done, just take your phone into your hand,
Go to Maps then select Options-then Settings
Internet-Connection-Offline ( don't worry your GPS will work fine as data bearer is Nokia which is free of charge, so just relax).
Navigation-Drive Guidance-Select the desired Voice
Walk Guidance-Select the desired Voice or you can set it to Beeps and Vibrations (if downloaded).
Home Location- define you home location by searching in maps, this will make easier to drive back to home by simply selecting Drive Home option while using navigation.
Now go to option Map-Categories-select the categories you want to be shown on the map.
Its DONE, now search for any desired location press the selection button and then select Drive to or Walk to option and you will be connected to GPS.
Please Note as GPS needs free environment so it may not work in home and generally it takes 10-15 minutes to connect so please be patient.
Worked perfectly for me
By the way, why doesn't the maps application work if I doenload all the maps instead of only India map??

Only one agent does not receive call on queue

Hi team,
I have a CCx Express 7.x working properly.
There are some queue configured, but in a queue I ´m with the follow problem:
- Everybody can answer the incoming calls, but only one agent is not receiving the incoming calls via trigger;
- The agent stay in ready state, but the calling hear "Every our agents are busy";
The same agent can forward e answer the calls, if the call does not use the CCX trigger.
Can you help me please?
thanks

Hi Jean,
If the Agent belongs to CSQ\Resource group and be in Ready state, don't get calls from the Queue (Longest Available) is little surprise.
If this is the only Agent in Ready state, other Agents in this CSQ are forced to go to not_ready state, will he still not get calls?
What is the number of sessions associated with the Application and with the Route point? what is maximum count of callers to this application and Agents belonging to this CSQ ?
Thanks,
Anand

[InDesign CS4] - Spell() function does not get called in CHLinguistic Sample

Hi,
I am investigating CHLinguistic Sample plug-in on Windows InDesign CS4. I noted that in InDesign CS4 a new function is added FindError.
I always get call to function FindError() but I don't get calls to other functions like Spell(), IsCorrectGrammer().
Has Adobe changed something in InDesign CS4.
Any help will be appreciated.
Thanks and Regards,
Ian Wood

Hi Marko,
I have SDK Build Verison 352 September 2008. With this SDK it has CHLinguistic sample. It has the following info in readme file under Known Issues -
The CHLinguistic sample does not dynamically redraw misspelled
words after adding them to the user dictionary.
I have the old SDK. You have SDK Build Version 352 October 2008, so you must be correct.
I will download the latest SDK and post my results on the forum.
Regards,
Ian Wood

Strom 9520 , not disconnecting calls.

Hi,
I bought first blackberry phone, Strom2 .
It works quite fine but sometimes when I make a call its not disconnecting them. I have to take out battery and then use it for 1 day and then again the same problem
During this, My whole screen get locked and I cant make any click on screen. can you please tell me whats the problem?
[url=www.soundshop.si/kitare]kitare[/url]

shiwak,
Perform a reload or upgrade the BlackBerry Device Software. For more information on this procedure see the following article:
http://www.blackberry.com/btsc/KB03901
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

E71 does not disconnect calls immediately

Similar Messages

Maybe you are looking for