E71 Doesnt Boot Up Properly

Hi Everyone,
My brand new E71 doesn't boot up anymore. I'm guess it is because of "PowerBoot" applications or whatever apps it is loading.
After I've installed a couple of applications today it was all fine, until I did a reboot.
Now when I boot it up again, it goes to main screen and then progress bar appears in the middle. After that screen flickers and phone restarts.
I cannot access the phone memory or anything. So any idea how to flash it/uninstall all applications?
Thank you!
Solved!
Go to Solution.

now u have three options:
1) Since ur cell is not in working stage go in for a hard reset.
'*' '3' 'Call Key' and Power button all pressed at the same time after u have removed ur phone battery for at least 5 mins. It wud turn ur phone as it was when it left the factory
2) Either to master reset and reformat ur phone
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
Phone reset code: *#7370# with lock code 12345
3) Ur memory card could also be the culprit. so try and get rid of the corrupt data in your card and the problem should be solved.
menu--tools--memory---options---format memory card......
remember everything including ur factory installed apps will be deleted.........
or just go menu---installations--app manager--- delete the selected apps u wanna delete stored on ur card .......
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Similar Messages

Mac Mini won't boot up properly

Mac Mini purchased in early 2005, Rev A I believe. I turn on computer, it stays on the gray screen for a couple of minutes at least. Then it shows the folder with blinking question mark that it can't find the start up folder. I've put in the restore CD as well as the Tiger CD and held "C," but it will not boot up from the CD so I can reinstall the OS. I've tried zapping the PRAM, nothing. It hasn't been used in a couple of years and I wanted brought it out to get it working again so I could use it.
Anyone have any other ideas to get it to boot up properly?
Thanks!

I once had a Lexmark inkjet printer back in my college days. At Christmas time, I unplugged the thing from the socket, and left it like that for about two weeks. When I got back, the thing never worked again. So, electronics can just suddenly "go bad" out of nowhere.
As for the interconnect board. Call around to some AASPs in your area, see if any of them will be willing to sell you one. They can create a stocking order with Apple and probably have it in a day or two.

Nokia booklet doesnt boot and no bios

hi
Ive bought a new booklet and installed all the updates. While surfing on the internet i suddenly wasnt able to use the keyboard or the touchpad. I wanted to restart but the power button didnt react too. So i took the battery out of the booklet.
But now it doesnt boot and theres a black screen. I cann hear the fan but after a few minutes the booklet turns off aggain. What can i do???

There is no fan, but what you hear might be the hard disk. BTW, does the Booklet/BIOS really not offer an option to boot from SD cards (which has been a common feature for ages on many notebooks featuring such readers), or do they just need to be formatted in some particular/peculiar way? I did see an "Operating System not found" error message when waking up from hibernation while an SD card was plugged in, so under some circumstances it DOES seem to try (and give preference over the hard disk).

Can't boot Windows properly

Hi!
I got some new parts for my comp about 1 week ago. I have been running this system stable for a few days when suddenly the computer wouldn't boot windows properly! It enters the Windows loading screen and then nothing happens.
After like 10 restarts i can enter windows again.
Safe mode with networking works perfectly and the windows has a clean install.
I have tried to boot with only 1 mem-module, then i tried some different sets and i tried to increase the voltage as well on both CPU and memory but no difference whatsoever.
I am not overclocking although i tried overclocking with the built-in system for overclocking but got a bluescreen so i set it back.
When i am in windows, working or gaming then everything runs smooth and i experience no strange things at all.
Please help, this is getting really frustrating...

Yes i have tried both the system restore, full system virus scan, scan for spyware and stuff, and the choice before the safe mode with networking, no difference there :(
As of now, i uninstalled my graphics driver (Catalyst) and rebooted a few times, and it reboots. I reinstalled the graphicsdriver but only the driver and not the catalyst center and it rebooted properly. this doesn't make any sense at all to me. Do you think my PSU is powerful enough?

MacBook doesnt boot when wi-fi router is on.

Greetings.
Thats pretty weird but it is how it is. First time my mac refused to boot i was really confused: tried everything and it didnt help: i saw a loader on the screen but it didnt boot further. Then i decided to re-install Mac Os. Did it, but next time i turned my Mac off i wasnt able to boot it again.
A miracle solved the problem: occasionally i unplugged power supply from my wi-fi router (D-Link DI-524 that is. Latest firmware update installed. original Release:B), and voila my MacBook did a happy beep-beep and started to load a system. So as it is now my MacBook Doesnt boot when my router is on and it does boot if i turn router off.
My MacOsX 10.4.1 is freshly installed with all latest updates that i downloaded via "update software" thing. Did no tuning to it, almost no 3rd party software installed so far, apart from MS Office 2004. My question is pretty simple: How can i make my MacBook boot without unplugging power from my router (since its pretty weird to do it every time i turn my Mac on).
Any suggestions?
Thank you for your help.

Could it just be stuck trying to join a Network, or mounting a Share of some kind?
Might try dragging these to the Desktop, reboot, and see if it works...
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist
Also any...
~/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist

IBook doesnt boot anymore

Servus alltogether,
I really have a BIG problem with my iBook here. I've installed the Screen Spanning Doctor in order to activate a second screen, and my iBook doesnt boot anymore. It gets to the point with the grey apple and the wheel, and then (using apple+v) there seems to be a problem by loading a file called dyld
dyld:library not loaded: usr/lib/libz.1.dylb
etc/rx line 262 55 trace / BPT trap couldnt find root user usr/sbin /update
I tried to reset nvram in open firmware without any sucess. I can log on in single user mode, but i dont know what i can do now from there.
It would be also very helpfun if soneone could tell me how to mount a external hard drive (I have a Lacie hard drive, perhaps I can rescue my data. Its still there, I checked it in single user mode.) or a usb-stick.
Perhaps it is also helpful when I tell you this: It is a G4 ibook, using the newest patch of mac os x tiger, and my graphic chip is a ati readon 9200 (which should work with the screen spanning doctor but apparently didnt).
I am really in trouble here, because I need this iBook for university. So please help me if you can.

Try starting up from a CD (Apple-C) or in safe mode: http://docs.info.apple.com/article.html?artnum=107393
Either of these methods should get your booted. Then, back up your data! Next, try Disk Utility to fix your disk. You may have to reinstall the OS. Luckily, you have that backup now.

My netbook doesnt boot or charge!

All of a sudden, i press the power button and tow lights appear for about 5 seconds and nothing happens! And i dont see the red ligh when i power to power cord in the notbook, please tell me how to fix this? The notebook doesnt boot at all

please, take a look at the tread first. if the suggestions don't work, i believe you'll need battery replacement as you said.
http://forum.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/Lenovo-Ideapad-Y560D-AC-Adapter-Battery-Proble...

Lenovo G400 doesnt boot

Hi Guys
my lenovo doesnt boot
the installation was messed up
windows was setup in drive d
doesnt really matter
is there something i can download to format the laptop
it keeps on restarting
doesnt even reach the login page
thanks

If the battery-LED is blinking fast (approx. 2 times per second) remove the battery, disconnect from power supply and press the power-button for 30 seconds. Then attach the power-supply leave the battery off and try to poweron the notebook. Dead batteries also can lead to the symptoms you described.
More hints:
The Z60 is based on the ThinkPad T43. It also can get "Flexing".
Other causes may be contact with liquids in the past, damaged keyboard, crashed BIOS-update, a short in the USB-ports.
To reset the CMOS you also can remove the BIOS-battery but take care: If BIOS-passwords had been set, you only can run the computer after entering the supervisor-password.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Qosmio x70-a doesnt boot

Hello. I'll try carefully to describe my problem. My notebook wont boot at all. After playing 15-30 min my notebook just shut down and wouldn't start. This notebook is only month old after coming from factory. I've tried to plug in and out the battery, thinking that some os problem occuried but the notebook just doesnt boot. Thx for answering.

Your best bet is to call Tech Support at 1-800-457-7777 and get on record immediately as having problems as well as getting some real time help.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Fsb increase = xp doesnt boot

i was just wondering (as i have no reason to oc its just a query) why windows xp doesnt boot when i up the fsb to say 140...
i have a kt4, amd2000+ & 1gb of pc2100 twinmos memory

well that would be good if i was willing to search for such a cpu (those are actually rare, i can't find it in stores catalogs), and it would cost me around 70 euros if i did. i don't hink i could sell my palomino xp2000+ for that money, so wouldn't it be best for me to perform the unlocking of the palomino?
i have read that some people experienced no improvement in performance. i also don't know what can go wrong if the unlocking goes bad. will it fry my cpu? will it need periodic re-unlocking (conductive paint could be damaged)?
i would only try to do this if i knew i would have a clear advantage, and a clear conscience of what i am doing and what can go wrong....
the temptation is big, but the fear overrides it.

Powerbook doesnt boot ?

Hi, I've tried to power my powerbook g4 this morning and it doesnt boot up?
When pressing the power button you can hear it attempt to power up but then it just make a funny beep.
What can i do? the screen doesnt come on as well

Your best best is to stick with Crucial, Kingston, or Samsung. Crucial is sold by direct and thru retailers. The Crucial UK site is at http://www.crucial.com/uk/ . Kingston's site is at http://www.kingston.com/ukroot/ (note, avoid their valueram line of memory as it usually doesn't work in our Powerbooks). Samsung is sold thru retailers. Online in the US you can get it from http://www.macsales.com - sorry, can't give you a UK retailer. You can pick up the stock number of the memory needed from the vendors sites then look locally too

My TX2 doesnt boot !

hi guys
i have a problem with my tablep pc TouchSmart Tx2-1125 ee
several times my device going to hibernate cuze of battery charge was end and when i turn on , it doesnt boot any thing and just too light on the keyboard was flashed , and i restart my device and then it was booting correctly , but at the last time when i do this , it doesnt work and my laptop couldnt turn on , just power LED is on and two light on the keyboard are flashing
i show u this on my utube channel : http://www.youtube.com/watch?v=YT0vgMtQuZo
i hope some one have an answer for this situation

@ MJ2011
>   too light on the keyboard was flashed
How many times would you say?   ; )
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01732674&tmp_track_link=ot_recdoc/c01443371/en_...
(BING search with
     site:hp.com black screen LED lights count TX2

MSI FM2-A75IA-E53 doesnt boot.

Hi,
My setup is: all new
MB: MSI FM2-A75IA-E53
CPU: AMD APU A6 6400K
ram: Kingston hyperX ddr3 1600Mhz KHX1600C9D3B1K2/8GX
It doesnt boot, there is only 2 short beeps and it loops like that. Please share some ideas on what is the problem?
Thank you.

Quote from: eligiusz on 04-December-13, 01:28:14
Hi , thank you for this post...
the serial number of the board is: 601-7792-010B1303109964
but how is it possible ? on the box it says it supports AMD A10 A8 A6 A4 processors.
yes it needs updating like Flobelix said as its a unsupported CPU by the BIOS the board has!
but how is it possible ? on the box it says it supports AMD A10 A8 A6 A4 processors. - answer is yes it does support the A4-A10 processors but only the Trinity ones (Eg: A6-5400k Trinity APU out the box) not your new Richland one as its not supported without updating the board BIOS to recognize the APU itself!

Computer doesnt start up properly ?

Any help out there ?.
Had to unplug computer the other day ,as it was blocked and couldnt close down any other way . And since then doesnt start up properly,either takes a long time to start up or just remains with progress bar ,say looking for local discs .
I have it set to turn on automatically at 6.30am and this doesnt work anymore .
Any genius out there ??
Thank you.

Hello martin,
The first thing to try would be to reset the PRAM.
Resetting the PRAM and NVRAM.
If that does not improve things then run Repair Disk from your Install CD.
To do this: Insert the Install Disk 1 into the drive and then select Restart; when you hear the chime hold down C key until the apple logo appears.
This will take you to the installation software, but you do not want to install.
Select your language, then go up to the top menu bar to Installer and navigate to the Disk Utility application.
Select the start up drive, then go to the First Aid pane where you can click on Repair Disk.
If it finds errors, repeat the process until it reports no errors.
After these repairs, quit the application, and restart normally.
Once restarted normally run Repair Permissions from the Disk Utility application found on your hard drive in Application/Utilities.
regards roam

Laptop doesnt boot after installing a new hard drive

HP G60-630us laptop ...replaced hard drive ...installed 3 startup discs.. after you remove the last disc, when you hit continue it is supposed to boot up ...it reads no bootable device ......if you put the first disc in to boot up, you end up back where you started.....i changed the boot order & put hard drive first ...still doesnt boot up
This question was solved.
View Solution.

Hi,
The image you download should just appear as 1 file. You should then use the 'Burn a disc image' option in Power2Go to write this correctly to a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

E71 Doesnt Boot Up Properly

Similar Messages

Maybe you are looking for