E71,E72 in corporate environment , user data

Company has tens of Eseries phones in use. Quite often phone will be handed over for use to other employee. IT should clean personal data like exchange e-mails, SMS, contacts, calendar, notes before.
Has anybody solution to remove personal data easy, but keep latest software installed on it.
rgds
Taavi

Hi, thank you for sharing your experience and yes this is the way I'v done it too. Problem is that it is quite time consuming, setting it up, installing all systems needed. I would say it takeas minimum 1 hour.
If I would like to transfer phone whitout reseting it, for me only problem is deleting e-mails, contacts,calendar, SMS entries, because all items can be deleted one by one and that is something I wouldnt like spend time hours :-), I havent found button or tools to delete all contacts or e-mails at once etc.
Our phones have virus protection, so phones are clean of viruses anyway.
But if there is no way to delete all user data smart and quick, we stay on reseting of course, just gathering others experience here.
rgds
Taavi

Similar Messages

TC and corporate environment.

We are looking to use TC in a corporate environment. We would like to house the TC units in our server room, do Mac's have to be directly connected to the TC in order to backup, or are the discoverable via Bonjour or TCP/IP? If this does not work, what solutions have you found to be useful?

c.baker wrote:
We are looking to use TC in a corporate environment. We would like to house the TC units in our server room, do Mac's have to be directly connected to the TC in order to backup, or are the discoverable via Bonjour or TCP/IP? If this does not work, what solutions have you found to be useful?
A TC will work either wirelessly or via Ethernet cable, although it's recommended to connect via Ethernet for the first backup (which copies everything); it will be much faster that way.
To avoid having to buy multiple TCs, you could connect a USB drive to the TC, and back some of the Macs up to it, rather than the TC's internal HD. Keep in mind that to keep a reasonable "depth" of backups, TM usually needs 2-3 times the space of the data it's backing-up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
You can also back up wirelessly to a shared drive on another Mac on the same local network. You could get, say, a Mac Mini and connect a drive (or drives) to it, and use it as a server to back up several Macs. See #22 in the FAQ Tip.
Or, you could get a Mac for your server room, and install +OSX Server+ on it, and all the other Macs could back up to it that way. I'm not really familiar with OSX Server; you might find more in the Server forums at: http://discussions.apple.com/category.jspa?categoryID=96

Skype on corporate environment

Hi, I want to know if it is okay to use Skype freely on corporate environment? Kind regards,Aljo

Yes, Skype is free for personal and business use. And not only are you freely allowed to use it in a corporate environment, instead, Microsoft actively encourage you to do so, and provide free tools for businesses such as "Skype Manager" for personal and managed (business) accounts, and "Skype Connect", which they encourage businesses to adopt for free to replace their phone system with Skype instead. I believe the reason Microsoft push for growth is because perhaps personal/businesses might decide to purchase Skype credits for calling landlines.But more importantly, as we learnt from Snowden's revelations about the CIA, that Microsoft store all video, voice, and messages over skype to sell or distribute freely to governments - similar to how Google also make money.And I believe Microsoft may also sell this data to third-parties for profit and analyse to display targeted ads within Skype. This is the reason why Microsoft has changed Skype radically since buying it - they now actively store everything you do on Skype in their cloud servers, which of course, individuals have no control over. So this includes sending video messages and pictures, which are automatically stored by Microsoft without permission from the user or even informing the user of their dubious tactics. Microsoft's Skype Privacy Policy briefly explains how they utilise our data.However, like all businesses, and like Google, they convenient leave out most details, including how Microsoft store all skype text, voice, pictures, and video data in their cloud system.

Job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION canceled

Dear SAP Guru,
The BG job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION is canceled every day and it´s
generating shortdump. Our system is SAP EHP1 for SAP Solution manager.
SAP ABA and SAP BASIS components are release 701 level 3.
ST is release 400 level 19
ST-PI is release 2008_1_700 level 1
ST-A/PI is release 01L_CRM570
Pls look on this shortdump.
Runtime Errors         RAISE_EXCEPTION*
Date and Time          22.03.2010 06:50:11
|Short text                                                                                |
|    Exception condition "CUSTOMIZING_NOT_FOUND" raised.                                           |
|What happened?                                                                                |
|    The current ABAP/4 program encountered an unexpected                                          |
|    situation.                                                                                |
|What can you do?                                                                                |
|    Note down which actions and inputs caused the error.                                          |
|                                                                                |
|                                                                                |
|    To process the problem further, contact you SAP system                                        |
|    administrator.                                                                                |
|                                                                                |
|    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
|    at and manage termination messages, and you can also                                          |
|    keep them for a long time.                                                                    |
|Error analysis                                                                                |
|    A RAISE statement in the program "SAPLDSWP_UTILITY" raised the exception                      |
|    condition "CUSTOMIZING_NOT_FOUND".                                                            |
|    Since the exception was not intercepted by a superior                                         |
|    program, processing was terminated.                                                           |
|                                                                                |
|    Short description of exception condition:                                                     |
|                                                                                |
|                                                                                |
|    For detailed documentation of the exception condition, use                                    |
|    Transaction SE37 (Function Library). You can take the called                                  |
|    function module from the display of active calls.                                             |
|    -                                                                                |
|How to correct the error                                                                          |
|                                                                                |
|    If the error occures in a non-modified SAP program, you may be able to                        |
|    find an interim solution in an SAP Note.                                                      |
|    If you have access to SAP Notes, carry out a search with the following                        |
|    keywords:                                                                                |
|                                                                                |
|    "RAISE_EXCEPTION" " "                                                                         |
|    "SAPLDSWP_UTILITY" or "LDSWP_UTILITYU19"                                                      |
|    "DSWP_GET_GLOBAL_CUSTOMIZING"                                                                 |
|                                                                                |
|    or                                                                                |
|                                                                                |
|    "SAPLDSWP_UTILITY" "CUSTOMIZING_NOT_FOUND"                                                    |
|                                                                                |
|    or                                                                                |
|                                                                                |
|    "RDSWP_NM_SYNC_USER_DATA " "CUSTOMIZING_NOT_FOUND"                                            |
|    If you cannot solve the problem yourself and want to send an error                            |
|    notification to SAP, include the following information:                                       |
|                                                                                |
*|
|System environment                                                                                |
|    SAP-Release 701                                                                               |
|                                                                                |
|    Application server... "crsgrant"                                                              |
|    Network address...... "10.128.32.175"                                                         |
|    Operating system..... "Windows NT"                                                            |
|    Release.............. "5.2"                                                                   |
|    Hardware type........ "2x Intel 801686"                                                       |
|    Character length.... 8 Bits                                                                   |
|    Pointer length....... 32 Bits                                                                 |
|    Work process number.. 13                                                                      |
|    Shortdump setting.... "full"                                                                  |
|                                                                                |
|    Database server... "CRSGRANT"                                                                 |
|    Database type..... "ORACLE"                                                                   |
|    Database name..... "SM1"                                                                      |
|    Database user ID.. "SAPSM1"                                                                   |
|                                                                                |
|    Terminal.......... " "                                                                        |
|                                                                                |
|    Char.set.... "Czech_Czech.28592"                                                              |
|                                                                                |
|    SAP kernel....... 701                                                                         |
|    created (date)... "Apr 12 2009 22:43:15"                                                      |
|    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"                              |
|    Database version. "OCI_10201_SHARE (10.2.0.4.0) "                                             |
|                                                                                |
|    Patch level. 39                                                                               |
|    Patch text.. " "                                                                              |
|                                                                                |
|    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."                |
|    SAP database version. 701                                                                     |
|    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows                |
|     NT 6.0"                                                                                |
|                                                                                |
|    Memory consumption                                                                            |
|    Roll.... 8112                                                                                |
|    EM...... 4181184                                                                              |
|    Heap.... 0                                                                                |
|    Page.... 24576                                                                                |
|    MM Used. 873664                                                                               |
|    MM Free. 170296                                                                               |
|User and Transaction                                                                              |
|                                                                                |
|    Client.............. 001                                                                      |
|    User................ "SOLMAN"                                                                 |
|    Language key........ "E"                                                                      |
|    Transaction......... " "                                                                      |
|    Transactions ID..... "C27635DF574FF121B0470050569757E9"                                       |
|                                                                                |
|    Program............. "SAPLDSWP_UTILITY"                                                       |
|    Screen.............. "SAPMSSY0 1000"                                                          |
|    Screen line......... 6                                                                        |
|Information on where terminated                                                                   |
|    Termination occurred in the ABAP program "SAPLDSWP_UTILITY" - in                              |
|     "DSWP_GET_GLOBAL_CUSTOMIZING".                                                               |
|    The main program was "RDSWP_NM_SYNC_USER_DATA ".                                              |
|                                                                                |
|    In the source code you have the termination point in line 22                                  |
|    of the (Include) program "LDSWP_UTILITYU19".                                                  |
|    The program "SAPLDSWP_UTILITY" was started as a background job.                               |
|    Job Name....... "SM:SYNCHRONIZE USER DATA FOR NOT"                                            |
|    Job Initiator.. "SOLMAN"                                                                      |
|    Job Number..... 00104000                                                                      |
Have you some solution or advice?
Best Regards
Jakub

Please could you check the following ?
- Please ensure that the latest version of note 1172948 has been implemented
- Please follow the recommendation in note 1314587.
- Check table 'DSWPGLOBALCUSTOM' and ensure that the entry 'DTMLOG' is available. Create the entry if missing.
These procedures will solve this issue.

Migrating Users & Data from a Powerbook G4 to a MBP

OK, I'm getting a refurb. MBP and I'm going to need to transfer over my stuff from the Powerbook G4 to the MBP. The thing is...both my 400 and 800 FW ports in the Powerbook have ceased to function, so Target Disk Mode will not work for me. I could use the Ethernet form of transfer to get everything over but that implies that the MBP will have to be up and running and have it's network settings all configured in order for it to be "seen" on the network. Is this the case? Or, upon startup of the MacBoook Pro, will I be prompted to migrate data & users via Ethernet?
In the past, I've been able to use Target Disk Mode and I'm familiar with that procedure, I just don't know what to expect via an Ethernet migration. Can anyone enlighten me?
Thanks

A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009
Connect the two computers via FireWire to do any data transfer whether manually or with Migration Assistant.

Installing QuickTime in a Corporate Environment

I apologize if this has already been asked, but I searched and couldn't find anything related. Hopefully someone can point me in the right direction.
I need to deploy the latest version of QT in a corporate environment. Our users are locked down and cannot download or perform automatic updates. Since they cannot upgrade to Pro, I'd also like to remove the Pro-related menu times. I'd also like to prevent the Help-->Check for Existing Updates menu from being displayed.
I've extracted the Windows Installer (.msi) files and created a transform for some minor changes. Other than the items above, the install works and runs great. I've poked at the registry and nothing jumps out at me. I've also gone through Edit->Preferences, but there are no options that match my requirements.
Any help would be appreciated.

You may be right, but I thought it was worth a shot. Previous versions have been a little bit more friendly in this regard.
I appreciate your reply. Thanks!

Using Time Machine in Corporate Environment

Hi, I have a question regarding time machine in a corporate environment. Instead of purchasing a time capsule, I thought it would be straight forward to share a large drive and have our ten Mac Pro computers share that drive for a time machine. This seemed to work for my test computer.
I then went to install it on one of our Mac Pros. I was able to map the shared drive but Time Machine did not recognize it. This made me take a step back and wonder if this use is even a good way to set it up. I read online where others were sucessfully setting up time machine using shared drives. Do I need to purchase a time capsule to use time machine on these ten computers? If so, will that configuration work over a wired network.
Thanks for any input.
-Stephen

soliveto wrote:
Hi, I have a question regarding time machine in a corporate environment. Instead of purchasing a time capsule, I thought it would be straight forward to share a large drive and have our ten Mac Pro computers share that drive for a time machine. This seemed to work for my test computer.
I then went to install it on one of our Mac Pros. I was able to map the shared drive but Time Machine did not recognize it. This made me take a step back and wonder if this use is even a good way to set it up. I read online where others were sucessfully setting up time machine using shared drives. Do I need to purchase a time capsule to use time machine on these ten computers?
No, not necessarily. You can connect one (or more) drives to one Mac. That Mac would back-up directly, of course; others on the same network can back up to the same drive(s) either via WIFI or Ethernet. See #22 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum. In this case, the Mac being backed-up directly should have it's own partition on the backup drive; the others could each have one, or could all share one.
You could back them all up to a Time Capsule (although with that many Macs, you'd almost certainly have to connect one or more USB drives to it for some of them to back up to). See #Q1 and Q2 in the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.

Export user data

Hi All,
I am using Siebel 7.7
My test environment will be overwritten by production data, the only issue being that the test environment users would not be able to log in then on the test environment as the test data is overwritten.
Is there a way to make sure that test users are still able to log in & do whatever they could before production data came in.
I thought about going about finding the tables related to S_USER i.e. the relationships so that I can take a cut of those tables from Test environment and then import them back after the production data has come into test environment, but this might be a problem as the tables I identify are most likely going to have referential data which would link them to some other important tables.
Anybody has an alternative and the best way to go about his.
Note: I only want user data in the Test environment, rest everything from production is fine
Regards

Hi Prashant
Please check the below blogs might help to Converting The UME Text File Into An Excel File
Converting The UME Text File Into An Excel File
ht[Converting The UME Text File Into An Excel File|Converting The UME Text File Into An Excel File]
Creating An Import File For UME From Excel
[Creating An Import File For UME From Excel|Creating An Import File For UME From Excel]
Hope it will helps
Best Regards
Arun Jaiswal

AE 5.2: Using Database as User Data Source

Hi all,
we have a problem connecting our User Data Source, which is basically just a DB accessible via SQL, to Access Enforcer 5.2 SP08.
To my knowledge AE only supports LDAP, SAP, SAP UME and SAP HR, none of which will be able to extract the data from our data source.
Is there a way of directly mapping the DB fields with our user data to the AE request fields (like the LDAP mapping, but without using the LDAP protocol)?
Would there be a workaround like attaching the UME to an external database? SAP Help only refers to the following sources:
"UME can use the following types of data sources: Database of the AS Java, Directory service, User management of the AS ABAP"
If so, would this also work with a dual stack system (ABAP&JAVA)?
Thanks,
Daniela

Hi,
I'm not sure of all the complexities around this but we had a similar problem where the user respository we used could not be connected using LDAP.
The solution that was implemented was to create an ADAM (Active Directory Application Mode) directory, which is connected to the user repository - ADAM is then connected the UME for AE as the LDAP server.
Probably not the most elegant solution, but we have been using this in PRD environment for a couple of months now without any performance issues.
Unfortunately I don't have all the details to guide you through all the config that was required, but perhaps you could investigate this as an alternative solution.
Regards

Prepare Move Request Overrides target user data overwritelocalobject

Hi all, I'm migrating from Exchange 2010 email between two different forests.
The two forests are Windows Server 2008 R2.
The two forests have the same users, and these are in production.
In migration, I need to migrate all mail alias forest users and permissions origin shared calendars.
When I run Prepare-MoveRequest.ps1, and put-overwritelocalobject, I target the user overwrites user data.
I overwrite data as zip code, description ...
If I do not put overwritelocalobject, I migrated user aliases.
How I can migrate mailboxes and aliases calendars permissions without overwriting other user data target?
regards
Microsoft Certified IT Professional Server Administrator

have you figured this out yet?
as I am doing a similar task,
however as of the lates CU fro 2013, I am using the prepare-moverequest.ps1 from, it states that you have to use
-uselocalobject & -overwritelocalobject.
however it returns everything fine, but when I go into AD I do not see any MSExch things set for this user, they are all blank.
I migrated users with ADMT first, then ran the prepare.
If I delete the user from the new environment, & then re-create them with prepare, then run ADMT all works fine.
the issue I have is with the users I did ADMT first, when I try a move I get either a legacyDN error or a ObjectGUid error......
would be nice if M$ could get their stuff together & get things working correctly.

OIM 9.1 User data set

Hi,
In release note of 9.1 it is mentioned that :
Display of all OIM User attributes on the Step 3: Modify Connector Configuration page
On the Step 3: Modify Connector Configuration page, the OIM - User data set now shows all the OIM User attributes. In the earlier release, the display of fields was restricted to the ones that were most commonly used.
and
Attributes of the ID field are editable
On the Step 3: Modify Connector Configuration page, you can modify some of the attributes of the ID field. The ID field stores the value that uniquely identifies a user in Oracle Identity Manager and in the target system.
Can anyone please guide me how to get both things as I am getting only few fields of user profile in OIM-USer data set and also not able to modify ID field.
I am using OIM 9.1 on Websphere application server 6.1
Thanks

Unfortunately i do not have experience using the SPML generic connector. Have you read through all the documentation pertaining to the GTC?
-Kevin

What happens to my local user data? -newbie question sorry

Hi All,
Firstly apologies if this seems a dumb question, I've scoured the forums but I require something that fits my specific situation.
I've had a (my first) MacBook for about 9 months, built up a fairly healthy local user, setup just how I like it, MobileMe, iTunes, Chrome, iPhoto library, lots of other apps, etc etc and so forth.
I'm setting up a Mac Mini Server, and was wondering what I can do to join the new server, but take all my settings/downloads/iTunes etc with me... I don't want it all stored on the server, but I come from a Micro$oft Windows background. With MS, when you add a PC to a domain, login with the appropriate user account, you have a fresh profile, no settings, no files, no customisations etc etc is this also the case when I hit that Join Network Account server button on my Mac? Will I get a blank fresh account on my Macbook?
I'm guessing this must happen quite often as people start their way into Apple technology and build up a nice healthy local account before branching further into the Apple world...

The two laptops I use everyday have access to all the servers via my network account. It is set so that my user account is listed as having "no home" So I log into the laptop with my local user account with a UID of 501 but access all the network services via the go menu and my network account of the same name but with a UID of 1034.
For all other users in the company, if they are on a laptop, I use network accounts. The machines are managed to ask if the user wants to create a mobile account when they login. For permanently assigned laptop users, the answer is yes. This puts their home on the laptop and ties them to that machine. I use mobile account syncing to make sure their critical data is copied to the server for backup.
By having the machine ask to create the mobile account, users can answer no and login to their network home. The use of the laptop may be needed temporarily if a regular workstation is down.
Once in a while I will need to convert a local account to a network account. While a bit more laborious that setting it up correctly at the beginning, it can be done.
But I never let any user account have the UID of 501. I would set that up as the local admin account I use for installing updates and performing other maintenance. If needed, I would back up the user data and erase and re-install the OS.

Error message: User data is not indexed, yet. Index user data first

Greeting All,
Each time I try to index a 'Prepared' searchObjectConnector in the cockpit.. I get a message <
User data is not indexed, yet. Index user data first>. even that I ran the z_ESH_AU_UPLOAD_AUTH_RFC_720 report in R/3 system.. and checked the auth /user data in the admin cockpit.. and it was indexed..
1.any idea why I keep getting this error
2.any idea how can I clean the buffer or the message Queu.. my guess this might be not error but a q message..
3. any suggestion please
Thanks

Hi Areege,
I noticed that you created an OSS message on this issue. That was a good idea.
There is an answer for you in OSS from yesterday.
Kind regards, Klaus

Date Manipulation Depending on the various user date settings

hi,
I have a query.
In scripts, user date format setting is YYYY.MM.DD, values stored the table MHND are also in the format YYYY.MM.DD.
However when i pass the date values from MHND from form to subroutine pool the dates are available in the format DD.MM.YYYY in the subpool.
I want to calculate the diffenece between two dates. I have checked the function modules to calculate the differece betweent 2 dates those acccepts dates with type YYYYMMDD.
However i tried to bring my dates in from YYYY.MM.DD into YYYYMMDD format by using CONVERT_DATE_INTERNAL function module... That is not working as the user date format is YYYY.MM.DD and the dates are coming in subpool in DD.MM.YYYY format....
Please suggest me the approach the relavant function modules.... so as to manipulate the dates based on the user date settings.
Looking forward for your replies. Thanks in advance.
Regards,
Anuja.

hi anuja,
Try using the following formatting script symbol in your form routine
For example, you are passing the date into the subroutine then put K after the date field like below.
&date(K)& .
or
use SET DATE MASK : YYYY:MM:DD
Thanks,
Vamshi

Apple Configurator - Updating to iOS 6.1.2 removed saved user data

We are currently managing several classroom sets of iPads using Apple Configurator. When updating to iOS 6.1.2 on the Supervise tab, about two-thirds of one classroom (about 20 iPads) and another 4 out of 6 in a special education classroom lost all previously saved data (application data, documents, pictures, etc.) during the update. We have another classroom that updated approximately 30 iPads following the same exact steps using the same configurator computer and none were erased so we're having a hard time figuring out the issue.
When I was watching the configurator run through the status updates during the iOS update (e.g. downloading iOS, decompressing iOS, installing iOS) there was another step on the iPads that lost data which was "supervising device." All of the iPads were already supervised so I don't know why this step occurred or what caused it to happen. With the grouping of 6 iPads, the 4 that were erased immediately started decompressing and installing iOS while the 2 that saved user data went to the downloading iOS stage first. I wasn't monitoring the grouping of 30 as closely, but I did notice the "supervising device" stage on the iPads that lost all user data.

I think for the teachers you are going to have to tell them to copy their data off the device.
Suggest dropbox or other cloud storage. Could set up a WebDave server.
A simple and popular way to copy files.
http://wiki.dropbox.com
Could set up sync-ing so they would come back in he fall. I'd be cautios and do everythig simple.
For syncing pc or mac folders to iPad applications.
"Using SugarSync, you simply designate folders that you want to “sync” to the cloud and it keeps everything in sync anytime you make changes. This is the way cloud storage should be done and especially if you are using your iPad for buisness or for school."
The only potential downside is that so many apps for the iPhone/iPad come with Dropbox sync built in which makes it extremely convenient.
http://www.tcgeeks.com/best-ipad-cloud-sync-app/
Doug says:
"This can be done with Dropbox as well using one of the many Dropbox addons…"
http://wiki.dropbox.com/DropboxAddons

E71,E72 in corporate environment , user data

Similar Messages

Maybe you are looking for