E71 error message need serious help pleaseeeeeeeee

good morning to all the members.
i purchased my e71 last september and i encountered no problem except yesterday when all of a sudden i couldnt send SMS.  the error message is "general error. memory full. close application and try again"
no applications were running.  the phone memory is 60% empty.  the sd card memory is 85% empty.
i restore my phone to factory setting but still the problem persists.  
i backup my data using nokia phone suite backup and erased all the contents of the sd card memory.
still i cannot send SMS.  please helpppp meeeeeeeeeeeeeeeeeeee
note: i can make and receive calls. i can receive SMS.  i just couldnt send
thanks in advance.
Silver Grey E71
History: 5510-3210-XXXX-7650-XXXX-N70-E71

The problem is now resolved. I sync'ed the contacts and calendar on the PC. I reflashed the phone and then re-synchronized. The problem was solved but I lost my settings, I had to set-up the telephone again. Backups can keep the settings but they also keep the problem. Do not format and restore a backup as the problem will persist.

Similar Messages

  • Error message - need urgent Help

    Hi,
    I need some help from you guys, because, when I run my project and try to execute some action, I always get this error message in the Embedded OC4J Server:
    forward:WEB-INF/page/S2EpisodiosTable not found on action:/S2EpisodiosTable
    Here is part of the code:
    14:03:37 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
    14:03:37 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2EpisodiosTable.do
    14:03:37 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
    14:03:37 DEBUG (JhsActionServlet) -Parameter value: 1
    14:03:37 DEBUG (JhsActionServlet) -Parameter event: show
    14:03:37 DEBUG (JhsActionServlet) -Parameter partial: true
    14:03:37 DEBUG (JhsActionServlet) -Parameter source: S2EpisodiosView1
    14:03:37 DEBUG (JhsActionServlet) -Parameter partialTargets: S2EpisodiosView1 messageBox _uixState S2AltaSociais2Header S2CaracSocioDemog4Header S2EntidadeFinaceiras3Header S2HistoriaSociais2Header S2Procedimentos2Header S2ServicoExternos3Header S2SitHabitacionais3Header S2SitSocioProfissionais2Header
    14:03:37 DEBUG (JhsDataAction) -Executing action /S2EpisodiosTable
    14:03:37 DEBUG (JhsDataAction) -Found existing searchBean for S2EpisodiosUIModel
    14:03:37 DEBUG (JhsDataAction) -Stored searchBean for S2EpisodiosUIModel on request
    06/07/20 14:03:37 forward:WEB-INF/page/S2EpisodiosTable not found on action:/S2EpisodiosTable
    14:03:37 DEBUG (JhsDataAction) -No commit event in request and multiRowUpdateEvent request param not set, multi-row update NOT executed
    14:03:37 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
    14:03:37 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2EpisodiosTable.uix
    14:03:39 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
    14:03:39 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2EpisodiosTable.do
    14:03:39 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
    14:03:39 DEBUG (JhsActionServlet) -Parameter value: 1
    14:03:39 DEBUG (JhsActionServlet) -Parameter event: hide
    14:03:39 DEBUG (JhsActionServlet) -Parameter partial: true
    14:03:39 DEBUG (JhsActionServlet) -Parameter source: S2EpisodiosView1
    14:03:39 DEBUG (JhsActionServlet) -Parameter partialTargets: S2EpisodiosView1 messageBox _uixState S2AltaSociais2Header S2CaracSocioDemog4Header S2EntidadeFinaceiras3Header S2HistoriaSociais2Header S2Procedimentos2Header S2ServicoExternos3Header S2SitHabitacionais3Header S2SitSocioProfissionais2Header
    06/07/20 14:03:39 forward:WEB-INF/page/S2EpisodiosTable not found on action:/S2EpisodiosTable
    14:03:39 DEBUG (JhsDataAction) -Executing action /S2EpisodiosTable
    14:03:39 DEBUG (JhsDataAction) -Found existing searchBean for S2EpisodiosUIModel
    14:03:39 DEBUG (JhsDataAction) -Stored searchBean for S2EpisodiosUIModel on request
    14:03:39 DEBUG (JhsDataAction) -No commit event in request and multiRowUpdateEvent request param not set, multi-row update NOT executed
    14:03:39 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
    14:03:39 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2EpisodiosTable.uix
    Can anyone explain me why this is happening?? What can cause this?
    Thanks,
    Atena
    Message was edited by:
    Atena

    Atena,
    We have seen the same error appearing, but it doesn't do any harm. Your application should behave correctly, despite this error message raised by UIX runtime.
    Steven Davelaar,
    JHeadstart Team.

  • Installing Lightroom 5 Serious error! Need serious help

    I click install on the Creative Cloud Apps for "Lightroom 5" (5.6 I think) It start's downloading get's to about 42% EVERYTIME start's "Extracting" Start's skipping to 50% And then 83% And then say's Failed to install and I click "Learn more" And this come's up:
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example, ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s)
    ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
    ERROR: Key not valid for use in specified state.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Key not valid for use in specified state.
    ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
    If anyone can help that would be amazing thank's tried reinstalling also tried installing from Windows still not working!

    Exit Code: 6, Exit Code: 7 Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 -
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
    for information on how to review your installation logs

  • How to solve this error message, need some help

    Hi,
    I have posted the error message :
    500 Internal Server Error
    javax.faces.FacesException: #{CustBean.commandButton_action2}: javax.faces.el.EvaluationException: oracle.classloader.util.AnnotatedNoClassDefFoundError:
    Missing class: oracle.jbo.uicli.jui.JUNavigationBarInterface
    Dependent class: oracle.jbo.uicli.controls.JUNavigationBar
    Loader: adf.oracle.domain:10.1.3.1
    Code-Source: /D:/JDevStd10131/BC4J/lib/adfm.jar
    Configuration: <code-source> in /D:/JDevStd10131/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/server.xml
    When I try to open a swing form by pressing a af:command button on JSP page.
    Ravishankar

    Seems to be a "known" problem. Check for invalid views. See Metalink Note:206313.1

  • New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    So where is LR trying to copy the files?  Check your destination in the Import panel at the right.

  • Error message needs to be generated in case of change in released PO.

    Hi all,
    please help me how to solve this issue
    <b>issue1:</b>
    Error message needs to be generated in case of change in released PO.
    1) change in incoterms,  
    2) payment terms,                 
    3) quantity                             
    4) rate.                                    
    The system should allow for change on the higher side.

    Hi ,
    I think you point no 3 & 4 can be solved using option available in release startegy and for point 1 & 2 u have to try with some user_exits. I think so , others can comment on this .
    Thanks
    Dipak

  • ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Cold boot problem with X-FI Fata1ty card... Need serious help!

    Hey guys:
    I just finished upgrading my computer. Realized that I have a cold boot problem. In order to identify the source of problem. I began the following test.
    . Remove everything except, cpu, heatsink, ram, video card. Tried to boot with those devices. => No cold boot problem.
    2. Install the rest of the ram sticks (I have 4 x 52 in total). => No cold boot problem.
    3. Install the other video card (my setup is 7900gtx in SLI) => No cold boot problem.
    4. Install the Creative X-FI Fataty card. => COLD BOOT PROBLEM
    Once the computer is shut down via the front power switch on the case, the computer will not boot again. To boot the computer, I need to switch off the main power switch on the back of the psu and switch it back on; then turn on the computer via the front power switch on the case. I tried the problem with and without the sound card. Whenever the sound card is installed. There is the problem. If there is no that sound card in my rig, then there won't be any cold-boot problem.
    My rig specs:
    DFI Lanparty nF4 SLI-DR Venus
    AMD Opteron 65 CCBE 609 - Stock speed
    4 x 52 MB G.Skill Samsung TCCD LE 2.85V DDR 400
    CPU Cooling - Tuniq tower 20
    2 x EVGA 7900 GTX Stock - SLI
    3 x WD Raptor 74G RAID-0 SATA (-3) 0000 rpm (System)
    x Seagate Barracuda 7200.7 60Gb 7200RPM NCQ SATA - 4 (Backup)
    Pioneer Black DVR 0 DVD+/-RW - IDE /0
    Lian-li PC-V 200B Plus-2 with little case mod
    OCZ GameXstream 600W
    Creative Fatalty Sound Card w/ Front Panel
    Logitech Z5500 5. speakers
    I need serious help. This problem is so annoying.
    Tnanks and will greatly appreciate it.Message Edited by White_Hair on 0-27-200605:4 PM

    The onboard sound is disabled. Unfortunately I sold the Seasonic PSU to my friend. The OCZ GameXStream is suppose to be the higher grade psu than Seasonic PSU. Also, the cold boot problem only exists if the sound card is plugged to the motherboard. I tried change different pci slot. It doesn't seem to help the problem. Thanks for the reply Message Edited by White_Hair on 2-02-200606:07 AM

  • Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

    Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I lost all email 6months and older in mac mail. Need Serious Help!

    I lost all email 6 months and older in mac mail. In my in-box as a well as all other folders I created. I expected that the mac email software would keep all email as it did for me in when I used to use Outlook. As well I thought I was covered with the Time Machine I have installed. Well.....The Time Machine that I was aggressively encouraged to buy apparently doesn't back up email. If it does, I must need some secret decoder ring to unlock where it is. I need serious help. I lost months of professional and personal data. I need to fix this immediately and find some way to get my email back. Please help.

    In March when I upgraded to Lion and iCloud I also experienced a similar problem (cluster of problems) which was solved by a password reset (conforming to new requirements) for my Apple ID. I'm glad to see that many nice people contributed and your primary problem is fixed.  My comment is on your Quicken problem.
    Your data inside Quicken 2004 is on borrowed time.  In the process of researching personal budgeting apps I found many reports on the web that indicate Intuit as a company is scaling down Quicken (desktop) development and its future attention to the Mac platform will be minimal.
    Did you know that Intuit is behind Mint.com?  You may be hesitant to put your financial data "in the cloud" and I may be being sheepish, but.. bbaaaa, bbaaaaa, the cloud is where it's going.  I know first-hand want a pain in the arse it is to customize an app to your liking.  I spent several hours on Mint.com setting up categories and tagging transactions.  It's tedious. I didn't look because I wasn't a Quicken user, but perhaps Intuit was nice enough to provide a data conversion path for Mint.com.  It is worth a look.
    My second suggestion is to scour the web for a hack solution.  You can't be the only person who is facing this problem.  Quicken was very popular.  I just bet someone has posted directions or some code for exporting the Quicken 2004 data and manipulating it for something else.
    Good Luck.
    Ellee H.

  • When I tried to authorize my computer using my Adobe ID, I got an error message. Please help me out.

    When I tried to authorize my computer using my Adobe ID, I got an error message. Please help me out.

    Please restart your machine and try again.
    Thanks

  • HT201210 hi i when i am trying to update my ipad to ios i receive an error message 4005 please help.

    hi i when i am trying to update my ipad to ios i receive an error message 4005 please help.

    Read through this for solutions to error 4005:
    http://support.apple.com/kb/TS3694

  • After updating to OS6, I cannot sync my photos and I get an Error Message 1140.  Help!

    After updating to OS6, I cannot sync my photos and I get an Error Message 1140.  Help!

    You can use an external drive with LR but I recommend only using it for
    image file storage while keeping your catalog on your internal HD for
    performance. If you moved files outside of LR (Finder or Explorer) you will
    have to clue LR in on where they are now. Use the left-hand folder panel in
    Library mode to navigate to the location on your external drive and use the
    find photo option get LR to reconnect them. If you moved the catalog and
    now LR can't find it you should get a window allowing you to select a new
    one where you can navigate to the new location and select it. You can also
    just start LR by clicking on the Lightroom 5 catalog.lrcat file to open it
    and start LR.

  • Need serious help over here...

    Hi guys...need serious help...I am using nokia lumia 710 for the past 3months...today i tried to reset my phone,but after resetting my phone dint restart...it keeps on rebboting after the WINDOWS PHONE screen apears...So i need some help...i tried pressing power on,camera and volume up and down button to reset again...but nothing happening...if i charge the phone it does the same...plz help me

    Did you try removing the Battery for a couple of minutes, insert back and see if it makes any difference ? If no change then you need to visit Nokia Care

  • I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    Argh that's frustrating! I never noticed that key did not work in InDesign.
    A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
    However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
    I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
    Maybe ask on the scripting forum? InDesign Scripting
    I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
    But the option to toggle this setting was scriptable.

Maybe you are looking for