E71 fails to connect to GPS

I have had trouble with getting one of my E71's to connect to the internet. This one uses a top-up SIM card with no internet support. (The other E71 with network support works just fine). Before reading many blogs with this same problem, I took it to the Nokia Care Center where they up-rev'ed my firmware (which was good because now my speakerphone works) in the belief that this would fix the GPS. It didn't, and when I returned, the tech there used his SIM card to connect to the internet and get me connected to the satellites.
This looks like a logic bug to me. If there's no internet connection available, the logic should fall through to enable the GPS. Then it would work like my Garmin.
Anyway, my problem is that after the tech got me connected, the next day I tried to use the GPS but again, no connection. I left it on charger on the deck for 3 hours to make sure it's not the "slow no A-GPS support" problem and still no connection. I opened the internet application and connected to my home Wi-Fi, and then got GPS connection.
A couple of days later, same problem--no GPS connection.
My question is: once connected to GPS, does the E71 continually search for an internet connection each time the GPS app is started?
And then, of course, is Nokia aware of the logic bug in the hang if no internet connection is available? Sounds like they are, because there may be a feature in the tools menu to turn this off (why this should be a user option I can't understand because most users are hardly able to spell "GPS" let alone understand why an internet connection should be needed at all--my Garmin works just fine with no internet connection (*rant*.) (I can't check if this feature is there and/or works because Nokia Care has my phone back to fix this problem).
If anyone has this issue, and has resolved it, please let me know. After reading several blog postings, it seems that once the search for internet feature is disabled, there still are issues. Also it's unclear whether once you've connected to the internet and GPS is enabled, does the E71 continually look for an internet connection each time the GPS app is started?
Thanks!
Guitarman.

Similar Messages

E71 does not connect to gps after ovi map 3.0 upgr...

Hello.
I have just upgraded my maps application and now I can not seem to connect to gps, the indicator is red. I tried settings and in positioning it says waiting for gps. Pls advise how I can use my maps again.
Thank you.

ballistictushar wrote:
Phones with free navigation
Nokia E72
Nokia E71
Nokia E66
Nokia N97 mini Gold Edition
Nokia N97mini
Nokia N97
Nokia N86 8MP
Nokia X6 16GB
Nokia 5800 XpressMusic
Nokia 5235 Ovi Music Unlimited
Nokia 5230
To find Ovi Maps for other phones visit Maps Support-http://www.nokia.co.in/get-support-and-software/download-software/maps-support/compatibility-and-dow...
How to install and setup GPS in nokia E-71.
Firstly Install Nokia Ovi Suite (advance version of PC Suite) in your respected computer.
http://www.nokia.co.in/get-support-and-software/download-software/nokia-ovi-suite
After installation of Nokia Ovi Suite go to following link
http://www.nokia.co.in/explore-services/ovi-maps/downloads?intc=ncomexpserv-fw-ilc-lft-con-na-ncomex...
Now install the the second link file into your phone, i.e., "nokia_maps_3.03_10wk11_b04_s60_3.1_rom.Nocs.sis".
After successful installation connect your phone with data cable in PC Suite (DON'T run PC suite application in your system) mode and open Nokia Ovi Suite application in your system.
Now in Nokia Ovi Suite application click on View-Go to-Maps (make sure your system is connected to Internet and your mobile phone key pad doesn't get locked, if keypad autolock period is on switch it off for that moment and your phone is fully charged, now in maps select Asia in that India and download that India Map (103 MB) into your phone.
Please Note that do not disconnect your phone from data cable else maps will not get downloaded and will not to be
transferred to your phone.
After successful installation of maps into your phone download "Voice Guidance Languages", which ever is preferred by you, if you really want to enjoy it. Like- English(UK)-with street names or in Hindi, Tamil, Urdu.
Now you are almost done, just take your phone into your hand,
Go to Maps then select Options-then Settings
Internet-Connection-Offline ( don't worry your GPS will work fine as data bearer is Nokia which is free of charge, so just relax).
Navigation-Drive Guidance-Select the desired Voice
Walk Guidance-Select the desired Voice or you can set it to Beeps and Vibrations (if downloaded).
Home Location- define you home location by searching in maps, this will make easier to drive back to home by simply selecting Drive Home option while using navigation.
Now go to option Map-Categories-select the categories you want to be shown on the map.
Its DONE, now search for any desired location press the selection button and then select Drive to or Walk to option and you will be connected to GPS.
Please Note as GPS needs free environment so it may not work in home and generally it takes 10-15 minutes to connect so please be patient.
Worked perfectly for me
By the way, why doesn't the maps application work if I doenload all the maps instead of only India map??

6230i Bluetooth Connection to GPS

I cannot connect my 6230i to a Falcom NAvi 1 GPS. The Nokia see's the GPS but cannot pair to it saying security failed. The Falcom GPS pairs successfully to my Siemens 720 PDA. The falcom manual ( http://www.haid-services.de/assets/own/navi-1-user-manual.pdf ) says that a code of 1111 is required if a secure connection is selected which I tried.
It seems that the falcom will work without a secure connection however it appears the Nokia does not support this.
How do I get the two to communicate!
PEter Merle

Did reset the GPS. Tried using an older Nokiaof my friends and it actually completely resets when trying to establish a connection with the Falcon GPS!. Shows you that Nokia software skill leave a lot to be desired. I suspect Nokia conlu works with a secure connection to any bluetooth device and the gPS does not allow secure connections.
PEter

E71 Doesn't connect to the internet

Hi all
My E71 doesn’t' connect to the internet using SIM card it connects only by Wireless modem. I tried to format it and update the software many times, and still the same issue. I tried as well to re configure and install the access point and yet no internet. it is really a hectic to me not to use GPS especially i travel much.

Couple of things.
Make sure you get the correct settings for web access from your ISP (I'm assuming you have a plan with the ISP that gives you internet access - not all do), and make sure they are all entered correctly.
Start the web browser and goto Options > Settings > General > Access Point and make sure the ISP access point selected.
Internet access is not necessary in order to use GPS.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Failed to connect Error - Need Help, Please

I installed , created the simple "Hello" program and it ran fine on the simulator.
Then, I click the run OTA and now I'm in deep yogurt!
I get the message:
*** Error ***
Failed to connect to device 0!
Reason:
Emulator 0 terminated while waiting for it to register!
BUILD SUCCESSFUL (total time: 4 seconds)
I just want to restore things to what they were before I selected Run OTA. I've been reading for the past 3 hours and haven't found out to restore. I even deleted and re-installed but, still get the same meassge (probably some saved java pref file...). Anyway, HOW TO RESTORE to a virgin setup????
Thanks

... I read somewhere I need to reboot - I did and it took care of it.

Remote app on ipod fails to connect to itunes 10

After upgrading to iTunes 10, my remote app on the ipod touch 4G fails to connect. I've reauthorized, which times out most times, but eventually when it works, it only continues to connect to iTunes until I close and restart the program. I've disabled all firewalls and still have the issue. iTunes 10/iPod Touch 4G/iOS 4.1/ancient remote.app do not play well together.
Anyone else unable to get the remote app working reliably with this combination?

Hello all,
I would like to get more details from people who are still having trouble getting Remote 2.0.1 to connect. If you are unable to connect, please email me <[email protected]> with the following information:
- A detailed description of the specific issue you are seeing.
- What OS is on the host computer? (the one with iTunes on it)
- What OS is on the affected iOS device(s)?
- A description of your network topology. Please be as detailed as you can, including hardware and firmware versions, if possible. Also please explain how everything is connected.
- Is the base station running default settings, or do you have any non-standard settings enabled? If so, please elaborate.
- Do you have the built-in firewall enabled on the host computer?
- Do you have any other firewall or Internet protection (anti-virus, etc) installed on the host computer?
- Were you able to connect with versions of Remote prior to 2.0?
- If you have multiple computers, can you get Remote to connect to any of them?
- Does Home Sharing work between computers on your network?
- Do you see any messages in Console (in Applications/Utilities) on the host computer that seem to coincide with the connection failures?
Thanks,
Roy
<[email protected]>

My iphone 5 won't make a call when i fail to connect to the internet via 3g

My iphone 5 won't call when i fail to connect to the internet via 3g.
At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
(note: when the 3g connection does work, the phone has absolutely no problem calling people)
Anyone had this problem?
Even better has anyone got a solution?
Thanks,
Nick.

Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?

On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

I have a new install of Windows 2012.  I have two physical servers. One is a W2012 std Domain Controller ("DC"). The Second is configured as W2012 HyperV  ("HV"). Under HV I have
two VMs. One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS"). All systems are behind a firewall appliance. Exchange is working via Outlook and OWA internally and externally. The self
created SSL must be installed manually on external machines since it comes up as an untrusted certificate. Once installed remote outlook works and OWA works. I have configured the terminal server and I am able
to login remotely as various users under my "TS group". The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
for alias@ domain, then fails the logging on to the mail server) The error reads: "Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name. The
connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC. I have
tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command. I have also tried to use the guid via "Get-Mailbox
ALIAS | fl name, exchangeguid. Keep in mind all desktop users on the network are connecting to Outlook without issue.
I would appreciate any thoughts on solving this issue.

Hi,
According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
Regards,
Winnie Liang
TechNet Community Support

My new i phone 5 wont sync with my laptop, keeps saying failed to connect to sync services. any help?

I just purchased a new i phone 5. when i go to connect with my laptop it says 'failed to connect to sync services, try again later' it shows my phone, and i can see my app screens, however it wont let me sync, back up or make changes. this is my first apple product, any help would be greatly appreciated.

Hello there, load dogg.
The following Knowledge Base article provides some in-depth steps to help troubleshoot the issue you are descibing:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Thanks for reaching out to Apple Support Communities for answers to your question.
Cheers,
Pedro D.

OBIEE 11g agents are failed to connect to Essbase

OBIEE 11g agents are failed to connect to Essbase. We are using :USER & :PASSWORD (SSO) in connection pool setting to connect to Essbase.
User account exists in both OBIEE and Essbase. OBIEE dashboards which are based on Essbase are working fine. Essbase variables in RPD are upto date.
Only agents are failing and error says invalid credentials, but dashboard pages are running without any issue.
OBIEE: 11.1.1.5 (BP4)
Essbase: 11.1.2.1
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Login fails due to invalid login credentials (HY000)
Essbase and OBIEE services are up and running.
Any help will be appreciated.

We finally implemented CSS Token option and ended up with this error. We are unable to connect to essbase with CSS Token option.
We followed the Oracle document to implement this.
[nQSError: 43119] Query Failed: EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials. (HY000)
We did update this property:
JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} -Didstore.identityAttribute=objectguid"
Any help will be appreciated!

Fingerprint reader not working in IE and saying failed to connect to sensor

Hi all,
I bought a Qosmio x500 10t a couple of months back. For the first couple of weeks i had no probs using the fingerprint reader to log in to windows and to log in to websites in Internet exploer.
All of a sudden it would not work on any website stored. The green banner showed accross the top of site and asked to swipe finger but nothing happened when I swiped. I rebooted and it worked again but not for long before failing. This time a reboot didnt work so i deleted my finger prints and websites and started from scratch. That worked for a couple of attempts before probs started again. And on trying to get into Fingerprint utility it says failure to connect to sensor. So, I did a system restore. It worked for a couple of times again and then same probs. So I found the updated utility software, uninstalled the old and put on the new. Same again, worked for a couple of times then failed.
I could not find anything stuck in the registry but to be on the safe side i did a full system clean back to factory setup using backup discs. Hey presto i thought it had worked. Everything going ok for first 24hrs and then same problems start to occur. Only this time it is also prompting me to enroll fingerprints even though i already have. And when i try to get into the utilioty it says failed to read sensor again.
The fingerprint log on to windows always works as long as i dont close the fingerprint utility down before shutting down. If i do exit the utilty i cant reopen it as it just says failed to connect to sensor. And then i have to unistall and reinstall the utility software. Aty the moment it occasionally works on websites stored but most of the time it doesnt do anything.
Please help. Do I need to send laptop back to Toshiba??

Hi,
*I got a solution* for the problem that the fingerprint sensor "suddenly" does not work any more.
When starting the Toshiba Fingerprint Utility, it says "failed to connect to fingerprint sensor".
Is it possible that just before it stopped working there was a new firewall installed, or firewall settings had been changed?
*In my case, the problem was solved by changing my firewall settings* (Windows 7 Firewall Control) to ALLOW all traffic for
the Authentec Fingerprint Sensor Service (AFSS). It is the file "AtService.exe" in C:\Program files
The reason is simple:
The Toshiba Fingerprint utility communicates with the fingerprint sensor service via TCP/IP.
Therefore, any firewall that blocks traffic on the local computer will block the communication.
*After changing my firewall settings, fingerprint sensor works* on my R700 flawlessly now.

Error while connecting to an OData Feed from Excel 2013 PowerPivot . Error: Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported

I am trying to connect to a Odata Data feed from Excel 2013 Power Pivot
The datasource is in sharepoint site eg: https://sitename/Shared%20Documents/datafeed.atomsvc
getting below error
Error message:
Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported.
============================
Call Stack:
============================
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.ValidatePayloadKind(ODataPayloadKind payloadKind, ODataMessageReader odataMessageReader)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.InterceptODataException(Action action)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader..ctor(IODataResponseMessage responseMessage, Int64 maxReceivedMessageSize)
   at Microsoft.Data.DataFeedClient.DataFeedODataReader.CreateReader(IWebResponse webResponse, Int64 maxReceivedMessageSize, Boolean applySlashUpdatingBaseUriResolver)
   at Microsoft.Data.DataFeedClient.ODataHelper.GetCollectionsFromServiceDocumentUrl(Uri serviceDocumentUrl, DataFeedConnection connection)
   at Microsoft.Data.DataFeedClient.DataFeedConnection.Open()
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
   at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
Appreciate suggestions/answers
NOTE: The error is showing only while using Excel 2013 powerpivot
its working good with Excel 2010 powerpivot

Anita,
Please look into using Power Query to use OData as a source in Power Pivot.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error sending emails to Internet: Failed to connect. Winsock error code: 10051

Our exchange 2013 CU2 (CAS+MBX, Win2012) was sending emails to Internet using another server (a kerio email server) and outbound internet email was working as expected.
We have now removed the Kerio server, I also removed the kerio_Send_Connector I was using to send emails to internet and I also changed the email domain in Exchange to be authoritative. I created a new Internet send connector with default values, but the same
bad behavior is present.
Our Exchange 2013 receives emails internally and externally with no problems. The problems are sending emails to Internet. I am suspecting something in the firewall but i need to do some more research.
If from the same Exchange server I telnet to an Internet email host:25 I do get the smtp banner but as soon as I start typing HELO/EHLO I get disconnected and errors are logged.
Errors when sending emails to any emails address (this is from an email sent to google, all others are the same):
Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '400 4.4.7 Message delayed'
7/1/14 9:52:44 a. m. - Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted
failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 74.125.136.26:25'
I cannot find any references from such Winsock error that are related to Exchange 2013.
So far all email is being queued at the Exchange Server 2013. I am afraid to install CU3 and make things worse.
Thanks for your comments.

Just check if the receive connector settings are set to fine
check the send connector properties and see whether it is set to use DNS to route emails through external DNS/Internal DNS or smart host .
Do a telnet to external domain like hotmail,yahoo and see at what transaction you are getting an error
Enable verbose logging, restart the transport service and check if you get the same error in the verbose logs as well
Get in touch with the ISP and see if the port 25 for Outbound SMTP is opened.
YOu can check if SMTP Proxy is enabled in the firewall. If so disable the SMTP proxy in the firewall and check.
Good Luck!!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Device Manager HP Printer ! Symbol, Windows "failed to connect" Sound- Yet Printer Works

Every startup, I hear the Windows "device failed to connect" sound. How can I get rid of this?
I have an HP J6480 Printer with WIn 7. Device Manager is not recognizing the printer driver.
Under Device Manager, the printer is listed with the ! error symbol. No other devices have an error symbol. Yet the HP Solution Center and printer work.
1) I have tried fresh installs of the current HP Full Feature Software.
2) I have tried the HP Uninstall program, going through all five Uninstall programs two times.
3) I have run CCleaner to clear registry issues.
4) I have tried deleting the Device Manager "Officejet ! J6400 series" entry. The Solution Center and the printer then do not work. Apparently, Device Manager recognizes the printer but not the driver. I have to go to "Programs", "HP", then "Officejet J6400 Series" to reinstall the software.
5) I have tried to get Device Manager to recognize the software. When I click on "! Officejet 6400 series", I get the message "the drivers for this device are not installed (code 28)". If I then click on "Update Driver" and select" Browse my computer for driver software" then click on "Browse "C:\Users\Myname\Downloads", where I have both the HP 13.0 Full Feature Sofware Software and the Basic Print and Scan Driver files, it says "Windows cannot find driver software". If i click on "Search automatically for driver software" I get the same message.
I would very much appreciate any ideas! Thank you!
This question was solved.
View Solution.

Friendlycomputr,
Your persistence is admirable! I totally understand you just want it working properly. I really appreciate the updates, I am going to look into this and get back to you as soon as I can!
Thanks again
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Lumia 620 fails to connect to car bluetooth - coll...

My lumia 620 did initially connect to my ford focus car audi/phone successfully. However after about a week it failed to connect and I haven't been able to connect since. Defeats the object of hands-free!
Steps taken (which work with previous phones of various makes/models):
Turn bluetooth on in car
Turn on phone bluetooth connectivity
Car display finds my phone successfully and provides a PIN to enter in the phone
Phone bluetooth status says 'unable to connect to ford audio system' and times-out.
I've noticed that the 'tap to pair' message doesn't appear as it previously did and I can't find anywhere else to look for bluetooth settings.
A colleague who has an identical phone can successfully connect - it does show the 'tap to pair' message.
I have updated the ford audio system software and checked the other phone connects ok. I have also tried removing the phone battery several times but still no joy.
Help please - thanks

Hi Roshanrims,
Thank you for reaching out to us. Let's go with the connectivity issue first. Are you getting the same issue when you connect your phone to another PC? To further isolate the issue, you can try other troubleshooting steps found on the below link:
• The cable connection to my computer does not work
Note: The link is intended for the Philippines. Let us know your location so we can give you the correct link.
As for the Project My Screen, see this: Project my phone screen to a TV or PC.
We look forward to your reply.

E71 fails to connect to GPS

Similar Messages

Maybe you are looking for