E71 firmware upgrade problems

Hi,
when I want start my firmware upgrade (today 100.07.76 - Vodafone branded) to the actual one via NSU, it stops always ~60 MB. Tried many things already, everything is up-to-date from Nokia and PC with XP.
Any ideas ?
cheers
cafri
Message Edited by michaels on 18-Mar-2009 12:33 PM

It should not be anything to do with branding if the update starts downloading, if the branding was an issue you wouldn't even get acces to the update.
There are conflicting stories about Nokia service points and debranding. It can only be done if the phone has had any SIM lock officially removed by the network, and the service point may in some cases ask for a letter from the operator stating their approval for the action to be taken. Service points are not required to offer this service and so may not do, and if they do it will be at your cost.

Similar Messages

Post e71 firmware upgrade problem

1) Back up recovery - For some reasons, not all applications and settings are restored.
2) Internet Browser failed to load.
Anyone else experience similiar?
Will keep you guys/gals updated with progress.

3) when typing in name of contact, it does not automatically search the contacts.

E71 Firmware Upgrade to 110.07.127 + WLAN Connecti...

I have a E71 (RM 346) (15 Days Old - Just Purchased it)and I have updated my firmware to Version 110.07.127 last night.
I have following problesm:
1. Even When I am standing next to the Wifi Access Point the E71 will say that there is no WLAN Available. (However while doing the SCAN, my laptop which uses the same WLAN Network works, fine.
2. After the upgrade of the firmware - I am unable to use the GPRS/EDGE from my operation - as I have unlimited data plan.
I HAVE DONE A COMPLETE FACTORY Reset as well - but nothing helps. This problem was NOT there before the Firmware Upgrade.
Any Help will be greatly appreciated.
Thanks -

30-Dec-2008 03:35 PM
cynnabon wrote:
yeah, it didn't work..
any solution there please tell me
i'm kinda tired of my nokia e71
I believe the only solution would be to downgrade to the previous firmware and wait till new one will come.
Strange, no replies from Nokia people at all. Looks like they don't care about this forum...
Can anybody comment is that confirmed problem and does Nokia work on it or not?

E90 firmware upgrade problems

Recently, I upgraded my E90's firmware from the version 7.xx to 300.34.84. I backed up all the data on the phone prior to the firmware upgrade - as required for the retention of software certificates and data.
Some of the trouble I'm having now is with the Download! folder, specifically the Applications subfolder - it does not update it's content - actually, it's totally unaccessible. Also, the Windows Live Application no longer works - and I'm unable to download a fresh copy as a result of the problems with the Download! folder. Prior to the firmware upgrade, I had using the Windows Live Messenger application and the Windows Live email/messaging synchronising facility in the Messaging folder hitch-free for about three months.
Any ideas? Thanks
By the way, I don't think the upgrade in this case has much merit. Other than the A-GPS, there's no real substance in 300.34.84.
Symbian connected me to the world, to my dreams.. Thank-you Nokia

I just saw a post for the exact same problem on an E71. Search 'E71 Download! folder: Service Not Available' by hazz on this site. See my problem is I'm not too interested in the third-party software available from ea.mobile.nokia.com/ea/apps/. I'm interested in the ones that become available in the Download! folder, under Applications. When I click on Applications, the chevron appears, followed by the progress bar, which fills almost completely, then shows the this message: 'Catalog update failed!' I believe my internet connection is working fine - I watch youtube on the device often.
This week, a new link appeared - U2 - Get On Your Boots - which great, 'cause U2 rocks. But, Applications remains dead - even if I remove it from the list and click - Options/Select/Refresh List.
I got around the Windows Live problem by using the awesome Nokia Messaging (email) [http://email.nokia.com], and the instant messaging application mxit. Besides those minor issues, I think the E90 is a pretty awesome device.
Thanks
Symbian connected me to the world, to my dreams.. Thank-you Nokia

E71 Firmware Upgrade Step-by-Step (Undocumented Ti...

Although Nokia’s firmware upgrade claimed to be smooth using Nokia Suite, the fact it is not. There are many things which could interfere with the process. For example upgrading E71-1 firmware from 100.07.76 to 110.07.127 is not always trouble free. Based on experience, here are precautions to take:
Before you begin:
• Make sure your phone and computer/laptop are fully charged.
• Make your personal data is backed up safely.
• The BEST, FASTEST and EASIEST way of saving your personal data is making a copy of your phone memory on a memory card. Choose Tools > Memory > Options > Back up Phone Memory and wait until it will be competed.
• Make sure Nokia PC Suite is not running.
Upgrade Process Instructions:
1. Download and install latest “NokiaSoftwareUpdater” http://europe.nokia.com/A4579163 .Reboot if required.
2. Disable Antivirus or any other interrogative software on your PC.
3. Launch “NokiaSoftwareUpdater” and follow instructions
4. When prompted, connect your phone, in this case E71.
5. A 3-step process will start, identifying your phone, downloading latest firmware and upgrading to latest firmware. (a process of 15 min.)
Following those instructions will ensure a hassle-free upgrade.
Good luck.

I have a related issue on my E71-3 (New Zealand). Since moving to Firmware 501.21.001 contacts I have in 1-touch keep dropping off - not all, just the odd one here & there. In addition, the group ring tones for the same contacts are dropping off. Very odd. Most frequently it is my partners number impacted, which is why the issue stands out to me ... On start up, I'm now getting a message saying not all applications can be loaded from the memory card - on checking app manager, they are all loaded ... Anyone else having these issues?
iPhone 4 is looking more & more tempting by the day ;-p

**SPA2102 FIRMWARE UPGRADE PROBLEM WITH 5.2.12

I'm having problems loading firmware 5.2.12 onto my SP2102-R ATA. I have my laptop PC running Windows 7 directly with an ethernet cable from my laptop to the ethernet connection on the back of the SPA2102. I run the .bin file and In order to get the software to the upgrade stage I have to enter ****, 73738 1# to move to the next stage. I have now been waiting for 1/2 hour waiting for firmware download request from SPA. IT DOESN'T GET PASS THIS STAGE.......CAN SOMEONE PLEASE TELL WHAT I'M DOING WRONG OR WHAT I NEED TO DO DIFFERENT?
Thanks......

Based on my experience with the SPA2102-NA, it is not necessary to do a factory reset (*73738) in order to perform a firmware upgrade/downgrade.
However, now that you have done so, any and all previous user settings will have been reset to the original factory settings (including user set passwords - assuming your ATA is an un-locked SPA2102-NA).
If you think the firmware 5.2.12 is faulty, then repeat the upgrade/downgrade process by downgrading back to an earlier version:
http://www.cisco.com/cisco/software/release.html?mdfid=282414111&softwareid=282463187&release=5.2.12&relind=AVAILABLE&rellifecycle=&reltype=latest
If you are still having problems, see if this tutorial will reveal any procedural issues:
http://blog.cqvoip.net/2009/12/linksys-cisco-spa2102-updating-firmware.html
Regards,
Jeff - cqvoip.net

X4600m2 bios/ilom firmware upgrade problem

In the X4600m2 downloads, under Software 2.3, in the firmware category, I downloaded ILOM-3_0_3_31_r42822-Sun_Fire_X4600M2.ima (md5 checks out). I can't install the new firmware however (using the ILOM cli):
-> load -source tftp://172.22.95.215/ILOM-3_0_3_31_r42822-Sun_Fire_X4600M2.ima
NOTE: A firmware upgrade will cause the server and ILOM to
      be reset. It is recommended that a clean shutdown of
      the server be done prior to the upgrade procedure.
      An upgrade takes about 6 minutes to complete. ILOM
      will enter a special mode to load new firmware. No
      other tasks can be performed in ILOM until the
      firmware upgrade is complete and ILOM is reset.
Are you sure you want to load the specified file (y/n)? y
Do you want to preserve the configuration (y/n)? n
Image is not for this platform.
Firmware image update failed.
->With all previous releases this worked fine.
Update: the upgrade on the ILOM web interface also fails.
I'm running this version currently:
-> version
SP firmware 2.0.2.10
SP firmware build number: 38791
SP firmware date: Tue Nov 4 18:36:42 PST 2008
SP filesystem version: 0.1.14
Any idea why this is failing? I've tried both preserving and not preserving the configuration.
Edited by: kaufmann on Jul 22, 2009 9:27 AM

Quote from: renewest on 14-July-12, 19:43:52
Are you saying that it worked before because of an error? I've worked with boards before tha supported 2 monitors, 1 on the mainboard and 1 on a graphics card.
Quote from: renewest on 14-July-12, 19:43:52
Are you saying that it worked before because of an error?
Yes.. normally onboard become automatically disabled, when dedicated card is installed.

Nokia n80 firmware upgrade problems

Hi all i just tried to do a firmware upgrade using the nokia sites stuff and my pc crashed and now my fone wont turn on could some1 please tell me
1 if this is terminal
2 if i can sort this out myself
3 point me in the right direction for the info i need to sort out my 3 week fone
4 how much i should expect to pay if i HAVE to go to a shop to get it sorted
thanks in advance for any help given

Right first thing I would try is to connect your mobile to your pc and try running NSU again. If it connects to your N80 great you should be able to just start over.
(Tips: Run only the NSU on PC close all other programmes down. and ensure your N80 is charged fully or at least plug your charger into the N80 whilst doing the update.)
If your N80 Isn't recognised by the NSU then its dead and the only way go revive the poor little things is to:
1: Take is to a Nokia Service Centre. Carphone warehouse is usually your closest NSC, If your lucky they will have an 'on site' techinician and he will fix your N80 within an hour or same day, if not then you will have to leave it with them for a week or so.
2: Call your Service provider, tell them your N80 just went bye bye and they should swap it for you or at least give you a refurbished N80.
You won't be charged by the Nokia Service Centre for any work done as your within your warrenty and if you choose to go back to your service provider you should also be covered. This has happened to me and I sent my N80 back to O2 they had a refurbished model sent back to me within a couple of days with no charges.

Nokia E71 firmware upgrade to 210.21.006 problems

I have just upgraded my firmware to the above version and now have the following problems; 1) the phone freezes 2) I cannot end an active call by pressing the red button but have to go to the menu and choose end active call. 3) the right soft key doesn't work in several apps. 4) the camera is now very slow to save image and yet again the right softkey (back) won't work and you have to press the home key and restart the camera between pictures.5) the phone has reset itself 7 times since the upgrade, during calls, internet or just on standby. Has anyone else upgraded and had the smae problems? the phone was fine before the upgrade and i only did the upgrade as it was supposed to have improved the camera and the audio quality. I have just re-installed the update to see if this amkes a difference. Here's hoping.

It’s now over 24 hours since I emailed Nokia and I haven't received a reply yet, not even an acknowledgement of the email. I think if I haven’t received a positive reply by Friday everyone that has problems should send a blanket email to Nokia (all sections of support) and see if they reply.
It would appear that Nokia are concerned with quantity of sales rather than quality of product and services
.I will post any response

E71 firmware upgrade failed and mobile software co...

I recently purchased a new E71 and on the same day I run the "Phone software upgrade". It took around 2-3 hours to download and upgrade the phone. I saw it was updating to 3.x framework from 2.x.
When I see after 2-3 hours what I saw that screen was blank, nothing on screen and keyboard light was on. I restared by removing the battery and restarted, but nothing happened. But on my PC upgrade was successful.
How this is possible. Is the framework upgrade is this much critical ? OR is there any other way around to upgrade the framwork of the phone?
After this problem I submitted my phone to nokia care and they installed the framework again, because it was corrupted. Now I want to upgrade the framework, so please let me know how can i do this easily.

Have a look at the link below for details on how to update your firmware. It is probably the same as the procedure you used the last time.
http://europe.nokia.com/get-support-and-software/download-software/device-software-update

After firmware upgrade problem CP1025NW

I am trying to upgrade the firmware on my CP1025NW printer. I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
After that on the printer is blinking caution sign and I cant print anymore (, I think soft erase old firmware and did not record new one.
Exist some kind of special software for an force firmware update ? or how can I restore it ?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system are we running the update from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

E71 firmware upgrade for A1 network - Nokia unable...

Hi,
Nokia, please make firmware v210 available to product code 0570359.
i have an E71, use it heavily in business and have standardized our company on it and need to upgrade it to v210 firmware, because the v100 is so buggy. i had 7 email interactions with nokia support and a1 support but both point the finger to each other and are of no help. so the last option is to use the forum, before i feel forced to switch my company over to the iPhone because of lack of nokia software support and upgrades.
the network provider A1.net says they have accepted firmware 200.21.118 already last year and informed Nokia in December 2008 to release v200 for this product code 0570359. A1 even says they have reconfirmed now again that the acceptance of the firmware has reached nokias support team. but when I check the nokia updater and the nokia website, it still says my firmware v100 is the latest. I know that even firmware v210 exists, know the list of fixed issues, so I actually want that one.
Is there anyone out there to help with this mess and help nokia from loosing even more business users over to the iPhone?
Bernd G.

first of all, it isnt Nokias fault. once firmware is released, they do their very best to roll it out and usually achieve this in a few eeks to most regions for their generic product codes (i.e. firmware that is not operator-branded). in your case, there is some kind of miscommunication between your operator (A1) and Nokia, that has resulted in the delay of firmware released for your particular product code. Nokia simply provide the firmware to A1, who then decide whether to actually release it or not with their logos and whatnot all over it (i.e. operator customisation) or if they do not, they will not release the firmware to the users. so all you can do is haggle A1 about it and hope they hurry up and release the firmware.
another option is to ask the A1 guys to sign a release so that you can take your phone to your local Nokia Care Centre and have it flashed with generic firmware. although this is often unlikely to happen as customer service for operators usually do not know what users are talking about when you request this, or are too stubborn/lazy to allow it to happen. but nevertheless, you can try anyway and maybe something good can come out of all this.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Airport Extreme 7.1 Firmware Upgrade - problems with Airdisk

I recently upgraded the Airport Extreme firmware from 7.0 to 7.1 but have experienced several problems.
After the initial upgrade, I encountered a double NAT warning, which was fixed by switching into Bridge mode, followed by an invalid IP address warning. I rebooted the AE and the warning disappeared.
Connecting to the wireless network is ok, except that it can never remember my connection (which is a closed WPA2 Personal network) and I have to manually re-connect every time I switch on the nac - with my previous Airport Express this would remember the network and re-connected automatically.
Worst of all however is that I can no longer see my AirDisk - a LaCie 500 GB USB HD connected to the AE.
The disk name is simply upper case ASCII and so I cannot understand why this is occurring. It worked perfectly using version 7.0. Has anyone else had these problems or aware of a workaround?
MacBook Pro (Core 2 Duo) Mac OS X (10.4.9)

The 7.1 update has caused problems for many many people.
What I did to solve problems was to revert back to 7.0. here's a link to a post I made over at jmacrumors.com explaining how to do it:
http://forums.macrumors.com/showthread.php?p=3690572&posted=1#post3690572

E71 Firmware Upgrade - Does it lock the phone back...

I got my E71 that is on 3 Network unlocked (by a mobile shop) earlier. Nokia released the new firmware however update wasn't available for all the phones depending on the network operator that are on. I wonder the reason for that whether operators put a protection to the firmware code that locks the phones back to themselves.
Has anyone out there upgraded their firmware if they had previously got their handsets unlocked? What is the result?
Cheers,
Ugur

After an update, your Nokia device may restart in its native language. To change the language go to Settings > Phone > General > Phone language.
If your Nokia device was originally manufactured for use in another country or region, using Nokia Software Updater may revert the set of available device languages to the original language set.
If your preferred language is no longer available after using Nokia Software Updater, you may need to return your Nokia device to a Nokia Care point to have this language reinstated.
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Creative Zen Xtra Firmware Upgrade Problems v1

While trying to upgrade the firmware on my Creative Nomad Jukebox Zen Xtra, there was a problem with the upgrade. I'm now stuck in rescue mode v.3. When I plug the MP3 player into the computer, Windows will recognize it and asks me what to do. I exit that window and try to run the firmware update again. The firmware program tells me "Your player is not connected, please connect your player."? there are 2 options "Upgrade" and "close". Upgrade is greyed out, but close is clickable. I've tried
1. clean up,
2. format all,
3. reload OS and
4. Reboot.
None of those options seems to do me any good. I've uninstalled all the Creative software from my computer, but still no luck. Please help me. I'm doing my best to avoid having to go buy an iPod, but if I can't get my Creative Mp3 player to work, I guess I will have to. I have spent a lot of money between cables, the docking station and the leather case. I'd hate for all this to be wasted, so please help me.
I've tried to "reload the OS" and then clicked on the language the moment the Player told me to start the update. Someone please shed some light on this for me. I've tried email Customer Support. I've searched Google. I've put my best skills on it and of course I've scoured this website to no prevail. Someone help me out.

READ ALL BEFORE PROCEEDING You do need to install the driver. http://support.creative.com/Products...e=MP3+Players# When you get to the page for your player bottom left the manual selection choose Xp & clik submit the driver should be the first one version 2.0.00 .After the driver is installed when you plug in the player check in device manager to see that it shows up there Start>Control Panel> System>Hardware>Device Manager look under Portable Devices or for the name of the player. Use a rear USB Port to assure a good connection. Then run the firmware file on the computer ,choose reload firmware or Os on the player,choose language when player asks for update(the pop-up from windows indicating that it "sees" the device DO NOT CLOSE IT.)

E71 firmware upgrade problems

Similar Messages

Maybe you are looking for