E71 Gets stuck after loud speaker is used in a pho...

Hi all,
My first post...
I only got my phone this week and have used the nokia updater to get the latest firmware (dont know what it is exactly).
I've noticed that after I use the loud speaker/ hands free setting in a phone call the phone gets stuck on the "front page". It wont go into the menu page by any means, or any other page at that.
[edit] I have to turn the phone off and on again to get it unstuck. [edit]
Has any one else experienced this?
Cheers,
Roddersf.
Message Edited by roddersf on 04-Nov-2008 06:22 AM

I haven't been able to correlate this with loudspeaker use, but I have experienced the same symptom.
After some usage (it may, or may not involve loudspeaker being activated), menu gets "stuck" behind the home screen. That is, upon pressing the menu button once, I can see a bit of menu screen appearing in top right corner of the screen, but I can't navigate it; it's almost like there is some bug in z-buffer ordering of the screens being rendered, and/or it also prevents the screen getting focus. I can still switch between the apps already running via the menu button press-and-hold though.
Didn't find a way to cure this except by switching the phone off/on.
Quite annoying.
This is on 100.07.76 RM-357 phone, will report if this continues after I upgrade to the latest firmware soonish.
P.S. At least one of my friends is experiencing exactly the same behaviour on his E71.
Message Edited by mbravo on 08-Dec-2008 08:57 AM

Similar Messages

My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Audio Meters "peak indicator" gets stuck after prolonged use of Premiere Pro CC.

Does anyone else have this issue? After using Premiere for a while (maybe an hour or so straight) the audio meters peak indicator will not reset when you start/stop. What do I mean? If your audio level peaks or goes into the red, it stays there like it should letting you know that the levels had hit above +0db. This is normal. This is good. But usually when you stop the timeline and start again, that red peak indicator is reset and disappears. But for me, after prolonged use (which is say about an hour or so), the meters stop resetting and the red does not go away unless I click on the meter to make it disappear. It looks like this even after stopping/starting the timeline:
***Meters work fine for the first 30mins - hour or so of editing. Hitting stop and then start again resets the meters as it should.
***Eventually the peak indicator (see screenshot above) gets stuck and won't go away. The meters continue to work fine, but the red does not go away.
Only way to then reset it is by clicking on the meter itself. Restarting Premiere Pro CC will put everything back to normal again and it should work fine again...for a while...before its starts to lock up again. This issue was present in 7.0.0 as well as the newly updated 7.0.1 I'm on a 2011 27" iMac with 16gb of RAM. (I've submitted a bug report, but curious if this happens to others.)

Jim Simon wrote:
I'm wondering if it's just me.
Maybe it's just you who has that much clipping audio. Most of us tend to avoid that.
#Layers
As much as I wish all my audio were perfectly leveled at all times... You mix live weddings with DJ's that don't know their own equipment with layers of audio in post and its a recipe for some +0db audio.
In all seriousness, I do hope that if others see this bug, they'll chime in and that this bug gets fixed. It's annoying.

Hand Tool Getting stuck after using spacebar shortcut

I have dumped the PS prefs, zapped the PRAM, fixed the permissions. It will work fine for a few minutes and then get stuck again. Even when retarting PS, the problem the hand tool is still stuck. It takes a complete reinstall to get it go back to other tools, then gets stuck again after several minutes of use
I'm on a Mac running Lion 10.9 with a Cintiq monitor. This had never been an issue until I installed CC.
It's driving me nuts. I cannot work in any productive manner.

All I can say is that we see a lot of Cintiq problems on this forum, and don't generally come up with answers. I'd say you are better going to eh Cintic forum on the Wacom site
http://forum.wacom.eu/

Canvas playback gets stuck after few seconds

Hi Guys, I'm posting this as my last chance to find some help. Recently I read tons of threads about choppy playback in FCP canvas but couldn't find anything useful.
I'm using unibody MBP 2.6 GHz, 4GB RAM. Latest Mac OS X version, latest FCP 7 version.
I'm trying to edit a footage captured by Canon 5D Mark II Camera. Using Compressor I downscaled the footage from Full HD to 1280x720 using Apple ProRes Codec. After importing into the FCP timeline it plays smoothly but if I do any change to the clip (speed change), canvas plays only 2 or 3 seconds of the clip, gets stuck while playhead is still moving and then when playhead reaches the end canvas shows the last frame of the clip. So when I wanna play the clip, canvas plays first few seconds then gets stuck and then shows me final frame.
You would probably need some more information about my sequence...if you do so, just ask.
Please, help me as I really need to finish this clip for my client.
Thanks

Yep, it is...I wanted to make my editing portable...I'm gonna move the clip to my FW800 HDD and let you know if that cause the problem.
Thanks

Stuck in loud speaker mode

I have an ipod nano 4th generation that is just over a year old. I have had no problems up to now. A few weeks ago i went to turn my ipod on and play my music through my headphones and it was almost like the ipod would not register that there were headphones plugged into my ipod and it was playing on loudspeaker mode. I dont ever use my ipod in loud speaker mode and had not used it for a couple of days when i turned it on and experienced this problem. Any suggestions?

First, if you have a speaker then you have a 5th Generation Nano, not a 4th generation.
Get a flashlight and inspect the headphone jack and make sure there is not an obstruction, lint, dirt, etc., blocking the connection. Clean it out if necessary.
If there is no obstruction, try a different set of headphones. If the problem persists you have a damaged headphone jack and will need to get it serviced.

Flash player loading files very slow and getting stuck after 100%

Hello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava D

Hello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava D

Firefox gets stuck after closing any window.

I have this problem that firefox always gets stuck for at least like 20 seconds each time when I close another firefox window. I usually have several firefox windows open at the same time. When I close one of them, the rest of them get stuck for seconds before they can do anything, sometimes crashed (not common). I notice that firefox crashing usually has to do with some firefox windows were running online video, like youtube or others. It can be any advertisement on any website that is in the form of moving pictures. But crashing is really not common. Just getting stuck every single time when I close one firefox window among others.
I thought it was because my computer is old but Internet Explorer doesn't have this problem on my computer. I even downgraded firefox to version 28 ( I used to have the latest, 36?) That did not solve the problem. I am running on windows 7. I would like to keep using firefox because it allows add-on so I don't want to switch to IE. Does anyone know what the problem is? Thanks.

I forgot to mention. This only happens to firefox. If I am running other programs and firefox at the same time, only firefox gets stuck.

Notification centre getting stuck after update

Hello,
Has anyone found their notification centre is getting stuck halfway down the screen after the 5.1 update?

I have noticed the same problem .It seems to happen only after installing ios 5.1.1. I have found that the problem gets rectified when i press the sleep/wake button and close the screen and then restart.
However pressing the home button didnt seem to work

Why does my multitasking gets stuck after updating into ios 7.1

Whenever I go to multitasking to close the apps my iPad gets stuck,but then its normal again

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Routers gets stuck after updating FW......

Hello all,
I have a wireless router - model BEFW114 ver.4.
A few days ago I downloaded the newest FW from the linksys site and installed it.
Since then, my router gets stuck every hour and I have to restart it by power off and on.
I am using PPTP connection to cables internet - can't connect through L2TP.
I had some stucks before the update but they were once or two times a day.
Another thing I saw is that when the internet connection is loaded, it gets stuck-
when I am downloading a big file for ex.
please help me...
Thanks,
Itay

How do I reset it for 30 seconds? Press the reset button for 30 seconds
or put it out of elec. for 30 seconds?
Do the router needs to be conected to the computer while doing it or not?
thanks...

The application gets stuck after 25-40 minits

Hi everybody
Based on a Cirrus code,I have made with different UI and add users with passwords a phone application....the idia of my application is to run nonstop (even in background), to receive calles from friends.
The application workes great (I'm getting calls, calling to my friends), but affter around 35-45 minits it get stuck and the phone reload the application.
I thought that it mybe the timers so I stoped them , then I thought it my be the reconnecting (refresh connection), that was after every 30 minits, so I lowered it to 5 minits, but it didnt solve the problem
If some body can give me even a direction it will help a lot......thank you for reading.

Does this hwlp?
http://supportforums.blackberry.com/t5/BlackBerry-Curve/uncaught-exception-application-net-rim-bb-ad...
I also saw this:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/uncaught-exception-message/m-p/1704037/highl...
Both are pointing to the messengers that could be causing this.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Contacts synchronization gets stuck after 8 contacts

Hi,
I have BB Bold 9700 with OS 6, I am using blackberry Desktop SW version 7.1.0.37.
When I sync my contacts with Outlook the synchronization is stuck in:
'"progressing"
Updating BlackBerry Address book data
updating 8 of 497 records'
I've tried updating BB SW (It also happened on older SW BB SW version) but it did not help.
All other synchronizations are successful (e.g. Calendar ...).
It seems that the problems is in my Black Berry since it takes much time to enter"contacts" after synchronization
Note that few of the contacts are in Hebrew
I also have a screen capture that I can send.
After sunchronization when I enter my contact in the BB I get the following error after couple of minutes "uncaught exception application net_rim_bb_addressbook_app(265) is not responding process terminated", then I can enter contacts and I see that 7 contacts were added but I cannot go into them (I get the same error)
Solved!
Go to Solution.

Does this hwlp?
http://supportforums.blackberry.com/t5/BlackBerry-Curve/uncaught-exception-application-net-rim-bb-ad...
I also saw this:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/uncaught-exception-message/m-p/1704037/highl...
Both are pointing to the messengers that could be causing this.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

HT6207 Macbook Pro getting stuck after security update 2014-002

After installing this security update, my mac is acting up, sometimes I am getting a split screen on safari sometimes and then the sometimes computer is hanging up and also when I am using non apple softwares like vlc player or yahoo messenger the mac hangs up? Is it normal?

The VPN connection to this specific servcie provider has worked for me with previous MacOS and with 10.9. It now fails and the only change to my Macs are that I loaded the Security Update 2014-002 in the of April. I checked by adding the exactly same VPN connection definition to a 10.6 Mac and connected from the same LAN. This succeeded. Thus I suspect the Security Update, or that there is some paramater that now needs to be defined/changed.

Treo 650- Can't get service after trip to Thailand & use of different SIM card - AT&T says it is a hardware problem

I have used my Treo 650 for years in the US. I've also taken it to other countries (Africa, Europe) and used SIMS purchased there for service while in those locations. Upon returning to the US after each trip, I've always been able to use my US SIM to get my US service back.
However, I went to Thailand in November and used a SMILE SIM and another Thailand SIM, both of which worked in Thailand. Unfortunately, upon returning to the US, my US SIM won't work for getting service any more. (I am using my US SIM in a Nokia phone in the meantime, and it is working. When I put the SIM into my Treo, it will transfer the text messges, but will not connect to my service provider, AT&T.)
I called AT&T and they said it was a hardware problem. I suspect it might be a "lock" problem with one of the Thailand companies. Is it possible that the Thai company locked my cell phone?
So my question is, how can I fix this? Whatever the problem is, I'd sure like my service back! Please help!!
Post relates to: Treo 650 (Unlocked GSM)

I don't think a SIM card can lock your phone. Did you let them do anything with the keyboard?
Can you try with a friend's AT&T or T-Mobile SIM card and see whether either will work?
Edit: You can ask about Thai mobile phone company issues on this board: Internet & Technology @ Paknam Web Thailand Forums
Message Edited by Jeffro on 02-26-2009 12:07 AM

E71 Gets stuck after loud speaker is used in a pho...

Similar Messages

Maybe you are looking for