E71 GPS 'route not found' when using device only s...

Hi, earlier today I was getting help to not get AT&T network data charges.  I have set everything up per direction but now when I try to search for something and navigate to it I get 'Route not found'.  Any ideas how to fix this?
Solved!
Go to Solution.

Start with a simple and obvious search string. If you give us an example of a search string that did not work we could have a look at it for you.

Similar Messages

  • WRT54G3G – "Router not found" when trying to configure broadband cable network

    Hi,
    I have a WRT54G3G, v.1.1 router. I have used it successfully for ~3 years with mobile Internet (Huawei E800 card). Recently I installed broadband cable network in my place, tried to configure WRT54G3G to work with it and failed…
    I tried manual configuration, and I was not able to set it up. I downloaded „Setup Wizard”, and tried all three options:
    a) 3G/UMTS or GPRS
    b) Broadband WAN Only
    c) Broadband WAN and 3G/UMTS or GPRS
    Only option a) can be completed successfully. When I try b) or c), I get following message from „Setup Wizard”: „Router not found, Please make sure the router is properly connected and try again.” I am sure I connected all cables as instructed.
    When I plug cable network directly to my PC’s Ethernet slot, it is automatically configured, and all is working fine.
    Can anyone advise please what to do? Thank you!
    Best regards,
    Jakub
    Solved!
    Go to Solution.

    What is the ip address of your router? It seems like the WRT54G3G is already talking to your modem and is getting the connection properly. Make sure that the WRT is not on the 192.168.1.x segment. 

  • Error oracle.sql.* and oracle.jdbc.driver.* not found when using oracle as a database

    I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
    Please Advice!
    Thanks in advance
    AnuPama

    Hi Anupama,
    First of all I would be surprised if you would not like to use the connection pooling feature of weblogic (in which case you might not be needing the import the classes directly), and would like to open direct connections to your database. Anyways for doing that I would recommend you to check out the readme doc that ships
    along with the jdbc oracle (classes12.zip etc). I am giving an excerpt over here:
    These are a few simple things that you should do in your JDBC program:
    1. Import the necessary JDBC classes in your programs that use JDBC.
    For example:
    import java.sql.*;
    import java.math.*;
    2. Register the Oracle driver before before calling other JDBC APIs.
    (This is not needed if you are using the JDBC Server-side Internal
    Driver because registration is done automatically in the server.)
    To register the Oracle driver, make sure the following statement
    is executed at least once in your Java session:
    DriverManager.registerDriver(
    new oracle.jdbc.driver.OracleDriver());
    3. Open a connection to the database with the getConnection call.
    Different connection URLs should be used for different JDBC
    drivers. The following examples demonstrate the different URLs.
    For the JDBC OCI8 Driver:
    Connection conn = DriverManager.getConnection(
    "jdbc:oracle:oci8:@<database>",
    "scott", "tiger");
    where <database> is either an entry in tnsnames.ora or a SQL*net
    name-value pair.
    For the JDBC Thin Driver, or Server-side Thin Driver:
    Connection conn = DriverManager.getConnection(
    "jdbc:oracle:thin:@<database>",
    "scott", "tiger");
    where <database> is either a string of the form
    <host>:<port>:<sid> or a SQL*net name-value pair.
    For the JDBC Server-side Internal Driver:
    Connection conn = DriverManager.getConnection(
    "jdbc:oracle:kprb:");
    Note that the trailing ':' character is necessary. When you use
    the Server-side Internal Driver, you always connect to the
    database you are executing in. You can also do this:
    Connection conn
    = new oracle.jdbc.driver.OracleDriver().defaultConnection();
    Hope this helps,
    Thanks,
    Anupama wrote:
    I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
    Please Advice!
    Thanks in advance
    AnuPama--
    Apurb Kumar

  • Jre not found when using Loadjava command

    Hello,
    I am getting an error when I run the below load java command on a 9.2.0.8 database on Sun/Solaris platform.
    Command:
    loadjava -user user/[email protected]:1529:OLS2 -thin -force -resolve -verbose filename.jar
    Error:
    /olcdbt/u01/app/oracle/product/9.2.0.8/bin/loadjava: /olcdbt/u01/app/oracle/product/9.2.0.8/jdk/jre/bin/jre: not found
    When I tried creating a new Jre soft link from $ORACLE_HOME/bin like : 'ln -s $ORACLE_HOME/jdk/jre/bin/java $ORACLE_HOME/jdk/jre/bin/jre' its giving a new error:
    jre was not found in /olcdbt/u01/app/oracle/product/9.2.0.8/jdk/jre/bin/../bin/sparc/native_threads/jre
    Strange thing here is that this was working fine in 9206 home and after upgrading to 9208 1 month back I am facing this issue. I am sure I am missing something here but not sure what.. Please help me resolve this issue.
    Regards,
    Raji.

    Hi,
    Even though the problem manifests when using loadjava, it has noting to do with the embedded Java VM in the database; it's rather an install /upgrade problem.
    Perhaps the followinf post can help: http://64.233.167.104/search?q=cache:h3XhGo2kZaYJ:forums.oracle.com/forums/thread.jspa%3FthreadID%3D43105+site:oracle.com+%22JRE+not+found%22&hl=en&ct=clnk&cd=9&gl=us
    Kuassi http://db360.blogspot.com

  • Getting error : Jre not found when using Loadjava command

    Hi folks,
    I am getting an error when I run the below load java command on a 9.2.0.8 database on Sun/Solaris platform.
    Command:
    loadjava -user user/[email protected]:1529:OLS2 -thin -force -resolve -verbose filename.jar
    Error:
    /olcdbt/u01/app/oracle/product/9.2.0.8/bin/loadjava: /olcdbt/u01/app/oracle/product/9.2.0.8/jdk/jre/bin/jre: not found
    When I tried creating a new Jre soft link from $ORACLE_HOME/bin like : 'ln -s $ORACLE_HOME/jdk/jre/bin/java $ORACLE_HOME/jdk/jre/bin/jre' its giving a new error:
    jre was not found in /olcdbt/u01/app/oracle/product/9.2.0.8/jdk/jre/bin/../bin/sparc/native_threads/jre
    Strange thing here is that this was working fine in 9206 home and after upgrading to 9208 1 month back I am facing this issue. I am sure I am missing something here but not sure what.. Please help me resolve this issue.
    Regards,
    Raji.

    Dear my collegue, the best place to ask this question is JVM forum.
    Java in the Oracle Database

  • Webutil bean not found when using call_form with no_share_library_data

    Hi,
    I have two Forms modules and i navigate from Form A to Form B using a call_form.
    If i call Form B with NO_SHARE_LIBRARY_DATA param, i get a webutil error: "oracle.forms.webutil.file.filefunctions bean not found"
    If i call it with SHARE_LIBRARY_DATA, there no error and my webutil function works as expected.
    Webutil is used in our application are works well so i don't think that it's webutil config problem.
    Any idea?
    Tx

    Thanks for your answer.
    Now I'am a little bit further with my debugging but it's more strange! forget the share_library_data...
    I start a common form with webutil.pll attached and i will use the Webutil_File.File_Exists function for example
    if i call it in the WNFI or WNBI, i get the error
    if i call it via a push-button WBP for example, it works!
    below the java console ouput when i get the error and after pushing ok on the error
    Loading http://sdp6:7778/sdp-jar_dev/frmwebutil.jar from JAR cache
    Loading http://sdp6:7778/forms/java/frmall_jinit.jar from JAR cache
    RegisterWebUtil - Loading WebUtil Version 10.1.2.2
    Loading http://sdp6:7778/sdp-jar_dev/hst65.jar from JAR cache
    Loading http://sdp6:7778/sdp-jar_dev/sdpimage.jar from JAR cache
    Loading http://sdp6:7778/sdp-jar_dev/host.jar from JAR cache
    Loading http://sdp6:7778/sdp-jar_dev/jacob.jar from JAR cache
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    La version Forms Applet est : 10.1.2.2
    2008-janv.-10 18:02:24.711 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.727 WUI[VBeanCommon.getIPAddress()] 172.22.35.17
    2008-janv.-10 18:02:24.727 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.727 WUF[VBeanCommon.getIPAddress()] 172.22.35.17
    2008-janv.-10 18:02:24.743 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.743 WUH[VBeanCommon.getIPAddress()] 172.22.35.17
    2008-janv.-10 18:02:24.743 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.743 WUS[VBeanCommon.getIPAddress()] 172.22.35.17
    2008-janv.-10 18:02:24.758 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.758 WUT[SessionFunctions.init()] Max Transfer chunk size set to 4048
    2008-janv.-10 18:02:24.758 WUT[VBeanCommon.getIPAddress()] 172.22.35.17
    2008-janv.-10 18:02:24.977 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.977 WUO[VBeanCommon.getIPAddress()] 172.22.35.17
    2008-janv.-10 18:02:24.977 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.977 WUL[VBeanCommon.getIPAddress()] 172.22.35.17
    2008-janv.-10 18:02:24.977 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
    2008-janv.-10 18:02:24.977 WUB[VBeanCommon.getIPAddress()] 172.22.35.17
    AFTER PUSH OK on the error
    2008-janv.-10 18:07:12.977 WUI[getProperty()] Getting property WUC_BEAN_VERSION
    2008-janv.-10 18:07:12.977 WUI[getProperty()] Value of WUC_BEAN_VERSION=10.1.2.2
    2008-janv.-10 18:07:12.993 WUT[setProperty()] Setting property WUC_SRV_LOGGING to 0
    2008-janv.-10 18:07:12.993 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.jacob.dll
    2008-janv.-10 18:07:12.993 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
    2008-janv.-10 18:07:13.08 WUT[loadSettings()] Local properties file loaded
    2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
    2008-janv.-10 18:07:13.08 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.JNIsharedstubs.dll
    2008-janv.-10 18:07:13.08 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
    2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
    2008-janv.-10 18:07:13.08 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.d2kwut60.dll
    2008-janv.-10 18:07:13.08 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
    2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
    2008-janv.-10 18:07:13.24 WUB[setProperty()] Setting property WUC_SRV_LOGGING to 0
    AFTER PUSH ON THE BUTTON THAT CALL THE SAME FUNCTION
    2008-janv.-10 18:07:34.758 WUF[setProperty()] Setting property WUF_FILENAME to c:\temp\1.txt
    2008-janv.-10 18:07:34.758 WUF[setProperty()] Setting property WUF_FILE_ATTRIBUTE to 1
    2008-janv.-10 18:07:34.758 WUF[getProperty()] Getting property WUF_FILE_ATTRIBUTE
    2008-janv.-10 18:07:34.758 WUF[getProperty()] Value of WUF_FILE_ATTRIBUTE=TRUE

  • Retro entires in HR Forms are not printed when using device type ZHPP3005

    Hi All,
    We are doing a HCM implementation. We are using HP P3005n printer and ZHPP3005 device type to print our HR forms. We are using ZCalibri font.These are smartforms. Everything was printing perfectly.
    Then there were retro calculations made to these forms.Strangely, the forms doesn't display these retro entries in the print preview using ZHPP3005 device type. Only the retro entries throughout the form are not printing. All other entries get printed.
    When we use device type HPLJIIID, we get these retro entries printed in our form however the format of the form gets changed.
    Now, we want to use device type ZHPP3005 and get these retro entries printed. How would we achieve this? Is this a device type issue? Or, anything needs to be done in the smartform? Why is this issue?
    Please help. Quick response will be appreciated. We are nearing our Go Live date and needs this resolved immediately.
    Thanks in Advance.

    Hi,
    Check the assigned page format to your custom device type. Try to assign all the page format which are available for
    HP*** which you gives you desired result.
    Regards,
    Vamshi.

  • JAXB 1.0 Final: jaxb.properties not found when using custom classloader

    JDK 1.3.1 is being used.
    The scenario:
    1) jaxb jar files, jaxb generated files and application files loaded in default class loader works, however
    2) jaxb jar files, jaxb generated files and application files loaded in a custom class loader generate the following exception:
    javax.xml.bind.JAXBException: Unable to locate jaxb.properties for package XXX
    To demonstrate here are two sample applications: a Launcher app whose job it is to start apps and a sample App1 application who needs JAXB.
    If launch is placed into a jar file named launch.jar and App1 is placed into a jar file named app1.jar (with a JAXB generated package), and both jar files are placed in a directory containing all the JAXB 1.0 jar files (dom, sax, namespace, etc) and the system is started with the following:
    jre\bin\java -cp launch.jar; testLaunch.launch
    the exception occurs.
    By way of comparison, if App1 is started directly with the following:
    jre\bin\java -cp app1.jar;jax-qname.jar;jaxb-xjc.jar;jaxb-ri.jar;jaxb-libs.jar;jaxb-api.jar;dom.jar;sax.jar;jaxp-api.jar;xercesImpl.jar;namespace.jar;ant.jar;xalan.jar testApp.app1
    the exception does not occur.
    Any help would be greatly appreciated.
    package testLaunch;
    import java.net.*;
    import java.io.*;
    public class launch extends javax.swing.JFrame
        private static URLClassLoader app1ClassLoader_; 
        private static Class  app1EntryClass_ = null;
        private static final String app1MainClassName_ = "testApp.app1";
        private Object appObj_ = null;
         static public void main(String args[])
              try {
                System.out.println("Launch Main");               
                new launch();          
                  System.exit(0);
              catch (Throwable t) {
                   t.printStackTrace();
                   System.exit(1);
         public launch()
            if (app1ClassLoader_== null)
                loadAppClassLoader();
            try{
                if (app1EntryClass_ == null)
                    app1EntryClass_ = app1ClassLoader_.loadClass(app1MainClassName_);
                if (app1EntryClass_ == null)
                    System.out.println(app1MainClassName_ + " was not found");
                else
                    appObj_ = app1EntryClass_.newInstance();
            catch(ClassNotFoundException x){
                x.printStackTrace();
            catch(Exception x){
                x.printStackTrace();
        private static void loadAppClassLoader()
            String jarPath = jarPath = System.getProperty("user.dir");
            System.out.println("jar path is: " + jarPath);
            try{
                File jarfile1 = new File(jarPath+File.separator+"app1.jar");
                File jarfile2 = new File(jarPath+File.separator+"dom.jar");
                File jarfile3 = new File(jarPath+File.separator+"jaxp-api.jar");
                File jarfile4 = new File(jarPath+File.separator+"jaxb-api.jar");
                File jarfile5 = new File(jarPath+File.separator+"jaxb-xjc.jar");
                File jarfile6 = new File(jarPath+File.separator+"jaxb-ri.jar");
                File jarfile7 = new File(jarPath+File.separator+"jaxb-libs.jar");
                File jarfile8 = new File(jarPath+File.separator+"jax-qname.jar");
                File jarfile9 = new File(jarPath+File.separator+"sax.jar");
                File jarfile10 = new File(jarPath+File.separator+"xercesImpl.jar");
                File jarfile11 = new File(jarPath+File.separator+"namespace.jar");
                File jarfile12 = new File(jarPath+File.separator+"xalan.jar");
                File jarfile13 = new File(jarPath+File.separator+"ant.jar");
                if (!jarfile1.exists())
                    System.out.println("**ERROR " + jarfile1 + " does not exist!");
                app1ClassLoader_ = new URLClassLoader( new URL[]{jarfile1.toURL(),
                                                                jarfile2.toURL(),
                                                                jarfile3.toURL(),
                                                                jarfile4.toURL(),
                                                                jarfile5.toURL(),
                                                                jarfile6.toURL(),
                                                                jarfile7.toURL(),
                                                                jarfile8.toURL(),
                                                                jarfile9.toURL(),
                                                                jarfile10.toURL(),
                                                                jarfile11.toURL(),
                                                                jarfile12.toURL(),
                                                                jarfile13.toURL()} );
            catch(Exception x){
                x.printStackTrace();
                return;
    package testApp;
    import javax.xml.bind.*; // JAXB classes
    import myGeneratedJAXBFiles;
    public class app1 extends javax.swing.JFrame
         static public void main(String args[])
              try {
                System.out.println("App1 Main");               
                new app1();           
                  System.exit(0);
              catch (Throwable t) {
                   t.printStackTrace();
                   System.exit(1);
         public app1()
            try
                JAXBContext jc_ = JAXBContext.newInstance( "myGeneratedJAXBFiles" );
                System.out.println("Successfully loaded JAXB Context");          
            catch (JAXBException jbe)
                jbe.printStackTrace();

    I'm doing something very similar. In fact my launcher is also stored in launcher.jar. It will start any application on the classpath and load dependencies jars located in the specified directory.
    The first thing you must do is specify the classloader when constructing the jaxb context:
    JAXBContext jc = JAXBContext.newInstance(xmlPackage, getClass().getClassLoader());
    After this I was still raning into the "jaxb.properties not found" exception in some situations. Basically if the class using the jaxb files is located in the same jar as jaxb.properties everything worked fine. However if the class using the jaxb objects was located in a different jar it did not work.
    I had to add the following early in the execution of the application that load the plugins to get things working correctly:
    Thread.currentThread().setContextClassLoader(jarDirClassLoader);
    As far as I can tell JAXB using the Context class loader to find the jaxb.properties file.
    I'm using JAXB 1.1
    I hope this helps!

  • Fonts not found when using Xvfb

    Hi all,
    I keep encountering "fonts specified in fonts.properties not found" whenever I execute rwserver.sh server=XXX.
    fyi, I'm running Solaris8 on Sun SPACE machine. I use Xvfb downloaded from Oracle to allow report server to run after I logoff from the session. I realised that the report sever I created manually will die prematurely if I log out from the session when I use the "default" Xserver provided by Solaris.
    And prior to running rwserver.sh I set the DISPLAY such DISPLAY=:1.0; export DISPLAY.
    pls advise.

    I get the same errors on my Solaris system with xvfb, but it doesn't keep anything from working. My reports server comes up and works fine.

  • Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

    Any help is appreciated.  Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
    using photoshop elements 10 on imac with OSX 10.8.2
    Thx

    Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
    Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

  • "command not found" when using bash as root [SOLVED]

    Some examples:
    bash: gparted: command not found
    bash: cryptsetup: command not found
    bash: lsusb: command not found
    All of these are defintely installed, and work without any problems if I type in their full path. Any idea why this is happening?
    Last edited by SkyValley (2008-12-15 02:57:30)

    That means you're not starting it as a login shell, so you may want to look in to that.
    /etc/profile is what you need,
    echo "source /etc/profile" > /root/.bashrc
    That's safe to do regardless and you can look in to the login shell problem later.

  • File not found when using write characters to file

    OK, I am missing something really basic here.  Whenever I try to use the Write Characters to File function, if I try to give it a path beyond the C:\filename directory, it returns an error.  In other words, C:\Dan works, but C:\Dan\Test reurns an error. WHAT am I missing?

    Bingo! That is the problem. You have to make sure the directory exists before you attempt to write files to it.
         BTW: In LV there is a function for creating folders programatically. A good way to see if a directory exists is to attempt to list its
                   contents. If the list function returns an error, the directory doesn't exist and you have to create it.
    So make use of the error that the file write returns. If you get an error, start at the root of your path and test to see if each level exists, and if not create it. When you have all the folders in place repeat the file save.
    Mike...
    Message Edited by mikeporter on 05-24-2007 12:55 AM
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Class not found when using JvmModelInferrer

    I am trying to transform one of my language elements to a class using the ModelInferrer approach. This generated class should extend a class (AbstractMatcher) from an external project. The external project is added to the build path of the Xtext model project as an external class folder and to the run-time project in the same way. It should be noted that the external project is a plug-in built in Helios SR1. I am able to reference the AbstractMatcher class from the xtend source code (it is available for auto complete and imported correctly), but when I start runtime eclipse, I get a java.lang.NoClassDefFoundError when trying to add a superType to the generated class. If I substitute the AbstractMatcher with a dummy like java.util.ArrayList everything works fine. I have tried to make a simple Java class inside the runtime Java project and reference the AbstractMatcher from it and this also works fine. Everything seems to be able to find the offending class except the ModelInferrer.
    import external.package.AbstractMatcher
    def dispatch void infer(Matcher matcher, IJvmDeclaredTypeAcceptor acceptor, boolean isPreIndexingPhase) {
    acceptor.accept(matcher.toClass("matchers." + matcher.name.toFirstUpper + "Matcher")) [
    superTypes += typeRef(AbstractMatcher) // <---exception here
    Stack trace:
    java.lang.NoClassDefFoundError: org/talend/designer/xmlmap/figures/treetools/zone/matchers/AbstractMatcher
    at org.xtext.example.mydsl.jvmmodel.MyDslJvmModelInferrer$1.apply(MyDslJvmModelInferrer.java:78)
    at org.xtext.example.mydsl.jvmmodel.MyDslJvmModelInferrer$1.apply(MyDslJvmModelInferrer.java:1)
    at org.eclipse.xtext.xbase.jvmmodel.JvmModelAssociator$1.run(JvmModelAssociator.java:397)
    at org.eclipse.xtext.xbase.jvmmodel.JvmModelAssociator.installDerivedState(JvmModelAssociator.java:407)
    at org.eclipse.xtext.resource.DerivedStateAwareResource.installDerivedState(DerivedStateAwareResource.java:240)
    at org.eclipse.xtext.xbase.resource.BatchLinkableResource.getContents(BatchLinkableResource.java:148)
    at org.eclipse.xtext.xbase.typesystem.internal.LogicalContainerAwareBatchTypeResolver.getEntryPoints(LogicalContainerAwareBatchTypeResolver.java:44)
    at org.eclipse.xtext.xbase.typesystem.internal.DefaultBatchTypeResolver.getTypeResolver(DefaultBatchTypeResolver.java:63)
    at org.eclipse.xtext.xbase.typesystem.internal.CachingBatchTypeResolver$1.get(CachingBatchTypeResolver.java:49)
    at org.eclipse.xtext.xbase.typesystem.internal.CachingBatchTypeResolver$1.get(CachingBatchTypeResolver.java:1)
    at org.eclipse.xtext.util.OnChangeEvictingCache.get(OnChangeEvictingCache.java:77)
    at org.eclipse.xtext.xbase.typesystem.internal.CachingBatchTypeResolver.doResolveTypes(CachingBatchTypeResolver.java:46)
    at org.eclipse.xtext.xbase.typesystem.internal.AbstractBatchTypeResolver.resolveTypes(AbstractBatchTypeResolver.java:69)
    at org.eclipse.xtext.xbase.resource.BatchLinkingService.resolveBatched(BatchLinkingService.java:71)
    at org.eclipse.xtext.xbase.resource.BatchLinkableResource.resolveLazyCrossReferences(BatchLinkableResource.java:165)
    at org.eclipse.xtext.EcoreUtil2.resolveLazyCrossReferences(EcoreUtil2.java:528)
    at org.eclipse.xtext.builder.clustering.ClusteringBuilderState.doUpdate(ClusteringBuilderState.java:234)
    at org.eclipse.xtext.builder.builderState.AbstractBuilderState.update(AbstractBuilderState.java:115)
    at org.eclipse.xtext.builder.impl.XtextBuilder.doBuild(XtextBuilder.java:248)
    at org.eclipse.xtext.builder.impl.XtextBuilder.incrementalBuild(XtextBuilder.java:228)
    at org.eclipse.xtext.builder.impl.XtextBuilder.build(XtextBuilder.java:123)
    at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:734)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:206)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:246)
    at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:299)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:302)
    at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:358)
    at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:381)
    at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:143)
    at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:241)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
    I sense that this is actually an OSGi problem, since I see this is how typeRef tries to find the reference, but I don't know how to get around it. I am not able to add the external plugin containing the AbstractMatcher class as a dependency and I'm not sure if it would be possible due to different Eclipse versions (Helios vs Luna).

    On 13.07.15 12:39, Zeljko Vukovic wrote:
    > but when I start runtime eclipse, I get a java.lang.NoClassDefFoundError
    > when trying to add a superType
    Does it work for you if you refer to the AbstractMatcher from Java-code
    that is in a project in the runtime instance?
    Best,
    Sebastian

  • Route not found on nokia maps

    Hi can anybody help.
    I updated my firmware on my N95 recently and now when I try to plan a route a keep getting 'route not found' message.
    I can see the local area map when I get a gps connection but if I type in an address , which is not in surrounding area I get the message above. If I move the map pointer in maps around I can move to an area where roads etc disappear.
    For example I have my home address in landmarks and my work (approx 10 miles apart) and even though I'm able to see surrounding maps when I'm at either place it will not calculate a route from one to the other.
    Help

    We found that the N95 needed to be "on line" before it would calcualte a route.

  • 310n router not found

    I have read the posts to see if I can find help but everything that has been said I tried.
    We have a static ip address 192.168.1--.1-- dashes are actual #'s i left out. I also have mask, gateway, dns servers info. When I run CD say router not found. I also have no connection to internet when all wires are set up properly. "this prevents me form accessing 192.168.1.1 on the internet to change anything. can I take router home and make changes through my home optonline connection and bring back to work. Would that work? Any other ideas.
    thanks in advance

    If you are using cable connection in Office also .... then you can take the router at home & configure the wireless router according to Optimum Online .... then again bring it here & connect it ...
    Make sure that you should do power cycle .....after connecting the Router here with Modem .....

Maybe you are looking for

  • LDAP Performance Tuning In Large Deployments - LDAP request time

    Tuning the LDAP request time <br> (tr_recv_timeout and tr_recv_timeout parameters) <p> The default is 60 seconds, and since the time will vary at each site for the length of time it will take an LDAP request to complete it wouldn't hurt to increase t

  • F4 help in alv grid

    I developed an alv grid in which one field is ROUGH SIZE ( AUSP-ATWRT).I want F4 help in this field. I already wrote the code as given below but F4 help is not comming. IF LCAT-FIELDNAME = 'ROUGH_SIZE'.       LCAT-REF_TABNAME = 'AUSP'.       LCAT-REF

  • TR-TM: error in Contract settlement

    Hi, When I settle contract there is a error message: Im BAFin-Meldewesen sind Stock,Sparte,Anlageart und DV zu pflegen. Message no. ISSR_MD_ADMIN038 Please help me how to fix it. Thanks and Best regards Ms.Minh

  • Having trouble with iPhone 5 sound level changing.

    When I touch the edges of the side of my iPhone 5, the phone vibrates and the sound level goes to zero.  I have to press the sound level button to change it back to whatever setting I had it at in the first place.  Any suggestions to solve or is this

  • Select Query on TCURR table

    Hello All, I am writing select query on TCURR table , but unable to get the values from table though i cansee the entries in table for the same condition as i provided int he program . Is there an peculiar reason for the sme . MY query is as follows.