E71 hangs when call answered

Hi Nokians,
A moment ago, when I click "green" key to answer a call, my E71 hangs (No backgroud application is running)
E71 is a great device but as days go by, more and more issue happened (refer below).
I cannot accept a phone that hangs when answering a call. It does not improve my productivity at all. My previous Treo 680 had the same problem, that is why I switched to E61i, and now E71.
To Nokia: you better improve! Cause E71 may be my last phone from Nokia.
List of bugs
1. Active Notes does not appear when call is make to the linked contact
2. GPS not able to lock to satellite, and display current location on map (solved by changing the positioning server to supl.nokia.com)
3. I connect to the email account and retrieve emails, the application shut down and returns to the home screen.
4. I have 2 e-mail mailboxes, the 2nd mailbox disappeared when auto-retrieval is turned on, all e-mails are lost!
5. Unable to terminate/hang-up when called number is busy (partially solved if automatic redial is diabled) or when an incoming call ends.
6. When set powersaver to "None", when the screen goes to power save mode, it display a time. The time stops at that moment. And will no tick at all.
7. Automatic Retrieval > E-Mail notifications > only in home network . When I open an incoming SMS, a warning message appeared, "Messaging: Memeory Full. Close some applications and try again." . I checked my phone's memory, it has 95MB free memory. I need to disable E-mail notifications, then only I am able to open an incoming SMS.
8. The recent call list (in, out and missed) shows all icons as "mobile" despite the number is a telephone number.
9. I am not able to enable both
- Automatic retrieval > E-mail notifications
- Automatic retrieval > E-mail retrieval
E71 only allows either one of the above to be enabled
10. Sometimes, E71 will hang when answering a call.
200.21.118
27-11-2008
RM346
NOKIA E71-1(26)
Message Edited by mecool2008 on 11-Feb-2009 10:16 PM

Hi,
I am also facing some of the problems you have listed.
My frined has Nokia E71 but with older FM 100..... He do not have much problems.
Nokia has to fix these problems at the earliest.
bye,
raj707
Mumbai - India
=====
200.21.118
E71-1
RM-346
=====

Similar Messages

XlC compilation hangs when calling createEnvironment()

Let me first say I am posting this message for a developer as I myself don't have much C/C++ development experience. My developer states he is trying to compile using xlC compiler and the -g -pg flags. He states it hangs when it gets to the OCCI call createEnvironment(). However, he says he can successfully compile when he ONLY uses the -g flag. Does anyone know what might be causing this? He also stated that they used to use the -g and -pg flags together BEFORE they tried compiling using the OCCI calls.
IBM 5.3 ML4
xlC 8.0
Oracle 10.2.0.3

Let me first say I am posting this message for a developer as I myself don't have much C/C++ development experience. My developer states he is trying to compile using xlC compiler and the -g -pg flags. He states it hangs when it gets to the OCCI call createEnvironment(). However, he says he can successfully compile when he ONLY uses the -g flag. Does anyone know what might be causing this? He also stated that they used to use the -g and -pg flags together BEFORE they tried compiling using the OCCI calls.
IBM 5.3 ML4
xlC 8.0
Oracle 10.2.0.3

8i hangs when calling a complex EJB

Regarding 8i (8.1.6) and EJBs on an NT Server...
We have been working towards deployment of a web application, using 8i, for some time now and have overcome a number of problems encountered with EJBs (remote access via 2481, clientserverserver demo not working when connecting as any other user than the EJB owner etc.). We have found the going hard at times but we have now hit a potential showstopper problem that we can't find a way around.
We have deployed ~25 EJBs and can call them many times from our client, including EJBs calling other EJBs. However, we have a more complex EJB that acts as client to 15 other EJBs and this is hanging intermittently. Sometimes it runs OK but then hangs at different points with ORACLE.EXE taking 100%
CPU. The only recovery is to reboot the server.
In our testing we have noticed the following points...
1. Starting the database up, running some EJBs, shutting down the database and then restarting it leaves ORACLE.EXE taking ever more memory without apparently releasing any. This can be seen to get worse and worse when repeating this loop.
2. When running many EJBs using several different Oracle connections (~10 different Oracle users) ORACLE.EXE takes more and more memory. It occassionally releases some but overtime grows.
3. Deploying EJBs increases the memory usage of ORACLE.EXE significantly. The memory is not released.
Some other points...
1. The EJBs called by the main EJB are the same ones that are called OK from an external client.
2. When the server hangs it tends to be when the main EJB is a). doing the JNDI lookup on another EJB OR b). running a method within another EJB. But it is difficult to spot any clear pattern.
3. We are using //thisServer/:thisSession when calling EJBs serverside.
We suspect that there may be a resource issue that causes problems under more complex scenarios.
Questions...
1. Are there known resource management problems with 8i on NT, or have we missed something ?
2. Has anyone else got problems with ORACLE.EXE hanging when using EJBs ?
3. Does anyone have any suggestions/ solutions ?
Thanks, Andy Blears :(

Stefan,
Thanks for the input. We have now applied patches up to 8.1.6.1 (I can't find any more recent) and the problem still occurs. The behaviour may have become more predictable in that it seems to go into an eternal loop whilst trying to load classes. BUT it may work well for periods of time.
Re. the performance it seems to be OK on the small tests we have run so far but because of the problems we're having we haven't run full stress/volume tests yet...I'll let you know - Are you asking because you have experienced poor performance ?

ABAP process hangs when calling a jCO Server J2EE-available RFC

Hi there
Here's the scenario:
We have deployed a jCO server under the SAP WAS. This jCO server implements two functions. They are both called from ABAP process through RFC. We are using the same RFC destination for both
First function is defined with import/export parameters and the second one only operates with a TABLE parameter.
Incidentally, these functions are captured by the jCO server, which calls an IBM MQ server
First function works fine. Second function hangs and there is not even a timeout so the ABAP process (run on foreground) can stay forever.
The interesting part is that the same application works really fine when called from a Tomcat using a standalon instance of the jCO.
Additional info:
We have noticed that some time after the second function gets called, there are five dumps on the system (the same amount of servers we make available). These are CALL_FUNCTION_SIGNON_REJECTED.
The fun part of the dumps is that the user making the RFC call is a different user that the one we use for the jCO connection, and the client number is '000', instead of the '728' we are using for the connection. Somehow they seem related but we do not know how yet:
Short text
    You are not authorized to logon to the target system (error code 1).
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPMSSY1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    RFC (Remote Function Call) sent with invalid
    user ID "%_LOG01% " or client 000.
    User "ARINSO " under client 001 from system "SMD " has tried to carry out an
     RFC
    call under the user ID "%_LOG01% " and client 000 (Note: For releases < 4.0,
     the
     information on caller and caller system do not exist.).
Call Program........."SAPLSMSY_ACTUALIZE_DATA"
Function Module..... "SCSM_SYSTEM_LIST"
Call Destination.... "SM_ET7CLNT000_READ"
Source Server....... "sapwasmd_SMD_10"
Source IP Address... "172.17.82.80"
Termination occurred in the ABAP program "SAPMSSY1" - in
     "REMOTE_FUNCTION_CALL".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 67
    of the (Include) program "SAPMSSY1".
Any tip or suggestion on where to look at is more than welcome
Thanks in advance,
Miguel

And this is the content of the defaultTrace.0.trc log from the WAS
1.#005056AB04C500440000000200002B0000046B495CA1AF67#1243862737727#com.sap.caf.um.relgrou
ps.imp.principals.RelGroupFactory##com.sap.caf.um.relgroups.imp.principals.RelGroupFactor
y.RelGroupFactory()#######SAPEngine_System_Thread[impl:5]_13##0#0#Info#1#/System/Server#P
lain###sap.com caf/um/relgroups/imp MAIN_NW701P03_C 2846629#
#1.#005056AB04C500240000000100002B0000046B495CCDAAFB#1243862740608#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/System Threads Pool/WaitingTasksCount>: com.sap.engine.library.monitor.
mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group for node'/Kerne
l/System Threads Pool/WaitingTasksCount' (MANAGERS.SThreadPool.WaitingInRequestQueueCount
, max. 40 characters)#
#1.#005056AB04C500240000000200002B0000046B495CCDB4CC#1243862740612#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/System Threads Pool/WaitingTasksQueueOverflow>: com.sap.engine.library.
monitor.mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group for nod
e'/Kernel/System Threads Pool/WaitingTasksQueueOverflow' (MANAGERS.SThreadPool.Waiting4Fr
eeReqQueueSlotCount, max. 40 characters)#
#1.#005056AB04C500240000000300002B0000046B495CCDCDA1#1243862740618#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/Application Threads Pool/WaitingTasksCount>: com.sap.engine.library.mon
itor.mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group for node'/
Kernel/Application Threads Pool/WaitingTasksCount' (MANAGERS.AThreadPool.WaitingInRequest
QueueCount, max. 40 characters)#
#1.#005056AB04C500240000000400002B0000046B495CCDD69B#1243862740620#com.sap.engine.library
.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace####n/a##b3
89a8004eaf11dec9b7005056ab04c5#SAPEngine_System_Thread[impl:5]_39##0#0#Error##Plain###Reg
isterNode</Kernel/Application Threads Pool/WaitingTasksQueueOverflow>: com.sap.engine.lib
rary.monitor.mapping.ccms.CcmsConnectorException: 2100850: Invalid configuration group fo
r node'/Kernel/Application Threads Pool/WaitingTasksQueueOverflow' (MANAGERS.AThreadPool.
Waiting4FreeReqQueueSlotCount, max. 40 characters)#
#1.#005056AB04C500600000001600002B0000046B4960688301#1243862801089#com.sap.slm.exec.messa
ge.SLMApplication#sap.com/tcslmslmapp#com.sap.slm.exec.message.SLMApplication#Guest#0##
n/a##c59827604eaf11de9fb3005056ab04c5#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##
Java###null##
#1.#005056AB04C500730000000000002B0000046B4CF0593ABD#1243878100908#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain###com.sap.mw.jco.JCO$AbapException: (126) 1: Array index out of rang
e: 48#
#1.#005056AB04C500730000000100002B0000046B4CF0594028#1243878100909#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.efh.jco.valtran.sap.ValtranRequestHandler.serverExceptionO
ccurred(ValtranRequestHandler.java:164)#
#1.#005056AB04C500730000000200002B0000046B4CF059406B#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO.fireServerExceptionOccurred(JCO.java:880)#
#1.#005056AB04C500730000000300002B0000046B4CF05940A3#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.listen(JCO.java:8187)#
#1.#005056AB04C500730000000400002B0000046B4CF05940DB#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.work(JCO.java:8303)#
#1.#005056AB04C500730000000500002B0000046B4CF0594111#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.loop(JCO.java:8250)#
#1.#005056AB04C500730000000600002B0000046B4CF0594143#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at com.sap.mw.jco.JCO$Server.run(JCO.java:8166)#
#1.#005056AB04C500730000000700002B0000046B4CF05941F0#1243878100910#System.err#arinso.com/
valtran_validator#System.err#Guest#0##ET7#MIGUELGU                        #4A240FF606CD5E
5AE10000000A38418C#Thread[JCO.ServerThread-11,5,SAPEngine_Application_Thread[impl:3]_Grou
p]##0#0#Error##Plain### at java.lang.Thread.run(Thread.java:770)#

Environment.Exit hangs when called from an application domain exception handler

I've implemented a handler for exceptions not thrown in the main GUI thread of my C# WinForms application, as follows:
AppDomain.CurrentDomain.UnhandledException += OnUnhandledExceptionThrown;
This handler is called from a background thread. The last statement in this handler is a call to
Environment.Exit with the application exit code. However, the application hangs in this call. From within Visual Studio, it hangs and I'm unable to break the application; I have to use Task Manager to terminate Visual Studio. Environment.Exit
works fine when called from the unhandled exception handler for the GUI thread. Is there a better way to terminate the application in the context of an unhandled exception thrown by a background thread?

Are you just trying to avoid a crash? Environment.Exit can cause deadlocking if exiting in the wrong kind of scenario; if you're just trying to avoid a crash, use
GetCurrentProcess with
TerminateProcess to terminate your own process. It skips the notification phases that Environment.Exit uses which prevents the common deadlock scenarios.
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

E71 Hangs During Call Reception

I purchased my Nokia E-71 about three months ago. I expected this phone to be up to par since it is considered an "Enterprise" phone. This my second firmware upgrade. My phone's current version is 200.21.118. To my surprise it hangs during call reception. It totally freezes; even the red power on/off button is not functional. The only resort is to unplug the battery and plug it back on. It's very exasperating to lose a business call, especially if it was an international one.
I call on Nokia to listen and pay attention to their customers and be responsible before it get deserted.

I understand your feelings but this is a user to user forum. There is no guarantee that your concerns will be seen by Nokia here and you will certainly not get a reply from them.
If you wish to contact them, you should use the "Contact us" tab on the top right hand corner of this screen.
With regards your problem, if it only started after the update then it is most probably a software issue which we would hope to help you resolve. We just have to go through a process of elimination, starting with the most likely and least disruptive. Whatever you do, always remember to backup your data just in case.

Crystal report hangs when calling oracle package

hi i have a oracle package that calls a proceadure, if i test this package in PLSQL developer it compiles and i get sensible results
this package has been designed using a ref type cursor to be called from crystal reports. it primary objective when the report is run, is to use File util to output data to an xml file.
when i run this from crystal reports it locks crystal reports up, and dosent output a file.
any ideas why crystal is hanging?
crystal DB call
{CALL Enhanced_Pharos_Report.run_report
(NVL({?a_channel_id},0),{?b_on_date})}
package
create or replace package UKTV_PHAROS_EXPORT_RPT
-- Author : WARDLJ01
-- Created : 03/04/2006 12:25:03
-- Purpose : export xml for pharos voiceovers
-- Public type declarations
AS
TYPE result_set_type IS REF CURSOR;
PROCEDURE run_report
(main_cursor IN OUT result_set_type,
V_CHANNEL_ID NUMBER,
V_ONDATE DATE);
end ;--UKTV_PHAROS_EXPORT_RPT;
package body
create or replace package body UKTV_PHAROS_EXPORT_RPT AS
PROCEDURE run_report
(main_cursor IN OUT result_set_type,
V_CHANNEL_ID NUMBER,
V_ONDATE DATE)
is
BEGIN
OPEN main_cursor FOR
-- Passess the parameters back to the cursor - which passes them back to the Crystal Report output
SELECT V_CHANNEL_ID, V_ONDATE from DUAL;
-- This is a procedure that calls FILE_UTL to export the data.
UKTV_PHAROS_Export(V_CHANNEL_ID, V_ONDATE);
END;
end;
Proceadure
create or replace procedure uktv_own.UKTV_Pharos_Export(V_CHANNEL_ID number, V_ONDATE date) is
l_output utl_file.file_type;
p_filename varchar2(30);
V_DETAIL_id varchar2(100);
V_MEDIA_ID varchar2(150);
V_REQUIRED varchar2(50);
V_SCRIPT varchar2(4000);
V_DEL_DATE varchar2(100);
V_FULLMEDIA_ID varchar2(500);
V_START_TIME varchar2(100);
V_DURATION varchar2(100);
V_DATE varchar2(100);
V_CHANNEL varchar2(40);
V_LOGO_NAME varchar2(250);
Cursor VO_CURSOR
IS
select event_voiceover.detail_id, vo_media_id, vo_required, vo_script, vo_del_date, full_media_id,
event.start_time, event.duration, event.on_date, event.channel_id, logo.logo_name
from event_voiceover,
onair.event, onair.event_technical_data,
onair.logo
where event_voiceover.detail_id = event.detail_id
and event_technical_data.event_technical_data_id = event.event_technical_data_id
and event_technical_data.content_id = logo.logo_id and
event.channel_id = V_CHANNEL_ID and
vo_required = 500004580 and
event.on_date = V_ONDATE;
begin
p_filename :='voice_overs.xml';
l_output := utl_file.fopen ('PHAROS_DIR', p_filename, 'w' );
OPEN VO_CURSOR;
utl_file.put ( l_output,'<Voice_Overs>');
Loop
FETCH VO_CURSOR INTO V_DETAIL_id, V_MEDIA_ID, V_REQUIRED,V_SCRIPT, V_DEL_DATE, V_FULLMEDIA_ID, V_START_TIME, V_DURATION, V_DATE, V_CHANNEL, V_LOGO_NAME;
EXIT WHEN VO_CURSOR%NOTFOUND
OR VO_CURSOR%ROWCOUNT = 10000;
utl_file.put( l_output, '<DETAIL_ID>');
utl_file.put( l_output, V_DETAIL_ID);
utl_file.put( l_output, '</DETAIL_ID>');
utl_file.put( l_output, '<MEDIA_ID>');
utl_file.put( l_output, V_MEDIA_ID);
utl_file.put( l_output, '</MEDIA_ID>');
utl_file.put( l_output, '<REQUIRED>');
utl_file.put( l_output, V_REQUIRED);
utl_file.put( l_output, '</REQUIRED>');
utl_file.put( l_output, '<SCRIPT>');
utl_file.put( l_output, V_SCRIPT);
utl_file.put( l_output, '</SCRIPT>');
utl_file.put( l_output, '<DEL_DATE>');
utl_file.put( l_output, V_DEL_DATE);
utl_file.put( l_output, '</DEL_DATE>');
utl_file.put( l_output, '<FULLMEDIA_ID>');
utl_file.put( l_output, V_FULLMEDIA_ID);
utl_file.put( l_output, '</FULLMEDIA_ID>');
utl_file.put( l_output, '<START_TIME>');
utl_file.put( l_output, V_START_TIME);
utl_file.put( l_output, '</START_TIME>');
utl_file.put( l_output, '<DURATION>');
utl_file.put( l_output, V_DURATION);
utl_file.put( l_output, '</DURATION>');
utl_file.put( l_output, '<ONDATE>');
utl_file.put( l_output, V_DATE);
utl_file.put( l_output, '</ONDATE>');
utl_file.put( l_output, '<CHANNEL_ID>');
utl_file.put( l_output, V_CHANNEL);
utl_file.put( l_output, '</CHANNEL_ID>');
utl_file.put( l_output, '<LOGO_NAME>');
utl_file.put( l_output, V_LOGO_NAME);
utl_file.put( l_output, '</LOGO_NAME>');
utl_file.new_line ( l_output);
end loop;
utl_file.put ( l_output,'</Voice_Overs>');
utl_file.fclose(l_output);
end UKTV_Pharos_Export;

Hi yes the package uses fileutil to output a file,
the report user has permission over the file util output directory.
I have previously used this method to generate rpt, and other output files in parelell.
thanks
james

Hangs when calling report to be displayed in PDF format

I am calling reports from a form using RUN_PRODUCT to be displayed in PDF format. Initially, there is no problem generating and displaying reports, but inevitably at some point when a report is run it just hangs. Rebooting the server temporarily fixes problem. Any ideas on what is happening?
Using Forms & Reports Server 6i on Windows NT 4.0

It seems that the key to the solution is to shrink the margins.....
Greetings,
Sim

Getting session hang When calling Function from SQL query

Hi All,
I am using Oracle 8.1.7.4.0. I have a fucntion in a Package and I am calling it from the SQL query. When I am firing the query my oracle session is going to hang position and I am not able to any thing. I have to kill the session.
But this same thing is working fine in Oracle 9.i.
There are no out parameter and no DML, DDL and DCL statement in this fucntion.
Could you please get back me what is the problem on it.
Regards
SUN

Check why your session hangs.
Just a few ideas:
* Blocking locks?
* Endless loop?
* Performance (maybe it is just slow in orac8i and you have to wait a bit longer). Check the execution plans of the SQL statements in your function.
* Don't use a function, but direct SQL, it is faster in both versions.

File upload hanging when called from another form

Hi
I have created a file upload form from the documentation I found on metalink and the form works fine on its own. I have then implemented the form into a multi form application and when the file upload form is called from another form it hangs trying to get to the client drive so that it can pick up a file. I have tried using the 'call_form', 'open_form' and 'new_form' built-ins but the results were all the same. Can anybody help me?
Maria

Hello,
This is not the support, so there are no post more urgent than other.
Francois

6210 - No ringtone or volume when call answer. Ple...

I cannot hear ringtone when I dial or voice when I receive any calls. I have checked the volume control, turned the phone off and on, removed and replaced the battery and SIM card and still cannot rectify the problem. Can anyone please help.

Hello,
Try to reset phone to the factory settings from Settings menu. It will ask security code. Enter 12345.
Regards,
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

JavaFX hangs when called from Java

Hello
I am developing a java application with a JavaFX gui, the communication from Java works with an java interface. The communication works,but after a few updates the javaFX code hangs and subsequently the Java code also hangs.
Is this a common problem, and so is there a common solution for this.

JavaFX UI calls need to be done on the Event Thread. So if your Java Application has multiple threads or runs on a different Thread to need to wrap all callbacks to JavaFX in a deferAction like this:
class YourFXClass extends YourJavaInterface {
   override public function someMethod(someArgument) {
        FX.deferAction(function() : Void {
              // doSomething with someArgument
    }

Nokia E71 -Hangs when we go to Maps

I recently purchase Nokia E71, Whenever i used to open the MAPS it hangs. I have waited for 5 or 6 hrs even it is not comming up. Everytime i needs to remove the battery and reset the Phone.
Is this the manufacturing defect of Phone or Maps will always hangs ?. Any users or moderators having such kind of problem.
Can you please suggest me.
Thanks

Hi roaming1977
I would check that in Menu > Tools > Settings > General > Positioning > Positioning methods that a valid network internet access point is defined, because if Assisted GPS feature can't get a network connection this can cause application to hang. Although in Nokia Maps application you can set "Go-online at start-up" to "always ask, no or yes" the Assisted GPS connection is a separate process. As you mention in another post that you don't have a "Data plan" then you need to DISABLE the Assisted GPS feature in "Positioning methods".
If it wasn't for need to backup essential data, I might have suggested a "hard reset" to return device to "out of the box" state to eliminate any possible software corruption. This would also be a good time to download latest version of Nokia Maps v2.0_4503 from here:http://europe.nokia.com/A4984199
Almost certainly this is a setting or software related problem and you would be also advised to download the latest regional maps to your device with Nokia Maploader on your PC.
Let us know how you are getting on and if you have any further questions.
Message Edited by scoobyman on 27-May-2009 11:14 PM
Happy to have helped forum in a small way with a Support Ratio = 37.0

WLS hanger when calling EJB in second WLS

Hello,
I have a very strange problem I need to track down. The scenario is as follows:
WLS6.1 SP3/Solaris 2.8
One WLS containing an EJB A (stateless session) that has Trx=Required on method_A,
the second WLS that has an EJB B deployed (stateless session) that has Trx=NotSupported
on method_B. Now I call in a client method_A of EJB A, which calls method_B of
EJB B. This works fine.
Now I install the second WLS on an different machine (same OS=solaris), and repeat
above scenario. The result is that I am able to call method_A of EJB A, which
calls method_B of EJB B. But after I return from method_B/EJB in EJB A, I hang
in EJB A/postInvoke.
From the thread dump I see the following:
"ExecuteThread: '46' for queue: 'default'" daemon prio=5 tid=0x7c20c0 nid=0x35d
waiting on monitor [0xdb0f000..0xdb0fdc0]
at java.lang.Object.wait(Native Method)
at weblogic.transaction.internal.ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:1970)
at weblogic.transaction.internal.ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:1899)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:220)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:189)
at weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:272)
at com.csg.pb.tit.tdc.cptypay.ejb.CounterpartyPayPathBean_43jp4t_EOImpl.routeCif(CounterpartyPayPathBean_43jp4t_EOImpl.java
at com.csg.pb.tit.tdc.cptypay.ejb.CounterpartyPayPathBean_43jp4t_EOImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:274)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
How canI find out what is going on?
Thanks
Juerg

I am getting the same exception about an assertion failed at weblogic.t3.srvr.T3Srvr.checkServerLock. Any ideas?

InfoPackage Hangs when called from Process Chain

We recently implemented the 2LIS_04_P_ARBPL DataSource and have scheduled the execution of a Delta InfoPackage in our nightly Process Chains.
After working correctly for 2 weeks the InfoPackage has hung the last 3 nights. It is being called and when I view the process chain log it is in the yellow (in process) status. When I look in SM37 in R/3 the extractor has not been called.
All of our master data and transactional data from other areas runs prior to this extractor and works perfectly via the process chain and if I force the InfoPackage to red and re-execute manually for 2LIS_04_P_ARBPL I have no problems.
How/where should I troubleshoot this?

Hi Jonathan,
Goto your process chain-> Select the delta infopackage -> right click and select wait time and enter the time in seconds. You could set it to 600 secs(10 minutes).
This would be a permanent solution to your problem as you need not go to BD87 each time for your data load.
Bye
Dinesh

E71 hangs when call answered

Similar Messages

Maybe you are looking for