E71 How to do I stop Image Store deleting my Wallp...

Hi, every time I do an image store I set it up to delete photos after it has sync'd them.
However it also downloads the system media files and deletes them from the phone too! You'd think it'd be able to recognise Nokia's own wallpaper, e.g.:
DARK.JPG
LIGHT.JPG
MINIATURE.MP4
etc...
How can I make it not download and delete system files, only actual photographs and videos I've made and downloaded?

Nancy,
Thank you. I ran the validation check, but other than some minor css attentions, there was nothing to explain why DreamWeaver is rewriting my code.
I am looking for a way to turn the automatic rewrite off, or at least ask me if I want to do that. There is a setting in the preferences for this, but even though I have unchecked it, I still have it deleting my end tags. Even if it was checked, a further setting is supposed to tell it not to rewrite a file with a .cfm, but it does whether rewrite is on or off.
As for ColdFusion Builder 3, I will take a look, but since I have been using DW almost since it came out, it will need to be impressive to make me switch. (Of course, rewriting without warning could force the issue, but that is a lousy reason to switch. I would be more likely to switch to a non-Adobe product since Builder would be an additional cost, and there are some good, open source options out there.)
Ken

Similar Messages

Stopping Image Store from Popping Up

Hi all,
I'm running a Media Centre with a photo frame attached via the second VGA out. I've set my N95 to copy all new images via bluetooth whenever I walk into the house, which works really well as my new photos just appear on the photoframe automatically. However, seeing that this is a Media Centre Only PC, it's quite annoying to have Image Store popping up every time it syncs because it quite often takes the focus from MCE.
Is there a way to make Image Store still sync the photos but still stay in the tray, just like PC Sync?
Thanks in advance,
Nik

Hi,
These forums are for user-to-user support only. You will not receive an official Nokia response here.
The moderators are only here to moderate and we will not be able to provide any assistance.
If you would like to hear from Nokia, you can use the "Contact Us" link at the top of the page and then, select your country in the section "Call or Email Nokia Care".
Regards,
Concordia
~*~ New to Nokia Support Discussions? ~*~
You may want to have a look at the guidelines!

How do I get iPhone to store deleted messages in MobileMe trash?

Here's the scenario: I have a Mac Pro, MacBook and iPhone 4. I use IMAP MobileMe with Mail.app for email while at home, and while I'm away and don't have my MacBook with me, I use the MobileMe web interface. I want all of my deleted messages from these different sources to end up in the same Trash mailbox on the server. I thought I had all of my devices set up to do that, but what's happening now is that when I delete a message from the iPhone, it goes into a folder called "Deleted Messages" in my MobileMe folders list.
On my Macs I have "Store deleted messages on server" checked, and "Erase deleted messages" set to "never". On my iPhone I've set the trash to "On the Server > Deleted Messages (.Mac)". This description appears next to the trash can icon, which I assumed would be where my deleted messages from Mail.app are going. But this doesn't seem to be the case.
Any ideas?

I haven't tried this, but browsing in private browsing (Tools > Start Private Browsing) while doing will probably keep Firefox from storing which sites you visited. Clearing the last hour's history will probably do the trick too.

ITunes showing wrong artist artwork. how do i find the image and delete it?

iTunes is showing the wrong artwork for an artist. What is strange and frustrating is that the image is not the artwork for any of the artist's albums. iTunes seems to be pulling it from nowhere. I can't figure out where iTunes is pulling the image from. It's a ted talk image.
How do i go about finding where the image is coming from to delete it? Sting gave a ted talk, which i had downloaded, so iTunes may be getting it as a result of that. i deleted the ted talk, deleted all the albums, and then uploaded them again but the image keeps popping up. also tried deleting the artwork cache with no luck. any suggestions besides deleting all of the Sting albums?????

Try giving one of your Sting albums a 5 star rating. Close iTunes and reopen. The artwork used for the artist should change.
tt2

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

How do I get the Ap Store to stop showing that I have an update available? I have aready purchased the update from the company's site.

How do I get the Ap Store to stop showing that I have an update available? I have already purchased the update from the company's site.

A Fix For: App Store Keeps Wanting To Update Apps

How do I put an image on my podcast in the itunes store?

How do I put an image on my podcast in the itunes store?

The image which appears in the Store page is referenced in the 'itunes:image' tag in the feed. As you are probably using a program or an online service to create your podcast, rather than hand-writing the feed, you will need to look in their Help to find out where you input the image or the reference to it.

HT1414 i have bought my Iphone 4s from USA and right now i am in India. How can i repair my phone in INDIA. when i contacted the image store they said, they will not repair it. friends can you suggest any possible solution

i have bought my Iphone 4s from USA and right now i am in India. How can i repair my phone in INDIA. when i contacted the image store they said, they will not repair it. friends can you suggest any possible solution

Because an iPhone warranty is only good in the country of purchase. You will have to take it back to the USA or send it to someone there to have them take it to an Apple store.

Windows Vista + N95 + Image Store - "Error communi...

I am trying to store images from my N95 using the Image Store application. This worked beautifully in XP, but after upgrading to Vista, all I get is a dialog box telling me "Error communicating with the phone".
This happens for both Bluetooth and USB connection, and it doesn't help that I set the Image Store to XP compatability, or run as admin. I really miss the Image Store functionality, it took the fuss out of storing images from the phone completely.
How can I fix this?
Details: Nokia N95
V12.0.013
19-06-07
RM-159
Nokia N95 (03.01)
Window Vista Business
PC Sync - 6.84.10.3
Image Store 6.83.0.0
Best regards,
Goran

There is another cause and cure I think cause I just "fixed" my problem of this kind over many hours of agonising and trying the suggestions above. Another internet site tells you :
"This usually happens for the simple reason that Gallery on the S60 device is running and currently holding open one of the files you're trying to backup (and delete). Switch to Gallery on the smartphone, back out of the image or video clip and use 'Exit'. Now try the 'Store images' function again - it should work fine!"
Unfortunately I couldn't obviously see a photo open in the Gallery. I was trying to store 103 images and I noticed it was stopping at one. I had a look at that one, it was not that important so I deleted it and try again. And it worked! It was as if it was evil, and blocking the software at that point. So it backed up about 70 images and jammed again. Found another image which I remember taking with the camera about a week ago and deleted that one, again not too important. Tried again and it went all the way backing up to a photo I took yesterday.
So that's it, something is left half open when the photo is saved and it screws up image store when it reaches it. Actually, I think that last image which I took I screwed up by closing the camera cover before it had finished doing its thing. I think now the moral of the story is that the digital camera in my N82 and it's softwared needs some TLC, it is not that robust, you need to give it a few seconds to do it's thing or it half saves these corrupted images. I could view the stuffed up image perfectly on the camera and Im sure there would be a better technical way of properly closing it in symbian rather than deleting it but yay it is solved!!

How do i make an image pause in a flash movie clip

Please can someone help me. I am trying to find out how to pause or stop an image in a basic flash movie clip, after it has entered from one side and before it exits the other side.
I have been trying to work it out myself for three days but no joy. I am practicing for a test with a training agency which gave me a disk to use but nowhere in it does it say how this is done. I am also having a lot of difficulty making stop start buttons work with this movie clip. I am using a trial cs5.5 version of Flash which expires in 7 days so i need to know this soon. I am up to speed on most of the features, its just this one thing that has me stumped. A lot of the tutorials or examples i have found on the net are very long winded and hard to follow exactly. Could someone let me know, step by step the sequence i should follow after i have created an object and made it go from one side of the stage to the other.

Hi
Thank you for getting back to me. Yes i am using a timeline tween. I have an image on my stage which moves in from one side and out the other side. I am trying to stop or pause the image. The effect i will be asked to reproduce in my exam will be something very much like the banner on the website http://www,iactweb.com. If you go to this website you will see images arrive on the banner and pause before exiting the other side. I am fairly up to speed on all the aspects of getting this effect but i have forgotten what i learned during the course on how stop or pause the images. I am using the trial cs5.5 version of flash . Thanks again for getting back to me.

How do I display blob (image) in a Portal Report

I am using 9ias 10222 and portal 30983 and I have a table that stores an image as a blob and have a varchar field to store the mime type. I have created a form to upload the image and can then query the form to display the image.
How do I dislay the image in a Portal Report/Dynamic Page Component. I have followed note 68016.1 but the retrieve_img_data procedure does not work it gives a wwv-11230 error.
Any ideas? Any help would be appreciated.
Thanks
Belinda

Hi,
Can you display what code you used for this? I followed note 172045.1 and everything compiles properly but when I run the report, I just get a box with a red X in it, like it is not finding the picture. I ran the procedure that downloads the image and it works fine from there. Thanks.

How can i control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?

Sup buddies,
How can I control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?
As the project grows in size the load time increases. How does one control not loading all images ,divs,elements etc. until they're
needed on the timeline? For example some sections are off and only become visible when recalled. My projects slowly grow in size so loading
all images , is counter productive . My other option would be to create separate htmls but that breaks the seamless user experience .
TY...Over N Out...

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

How can I save the images to the iPhone anywhere

Hello I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
Thanks

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How can I transafer my images please from PC to iphone 4s

how can I transafer my images ,please, from PC to iphone 4s.I dont understand how can I do it. Where is the options to add photos..I just remember that I must synchronize something..I've tried to find in internet but I see another interface of itunes on all kind of videos? I have anotherinterface in itunes.Ive allready update my itunes and iphone and have a latest version of IOS ..What is f...g that?please help me..

Also, the reason your iTunes interface may look different may be covered by the following in iTunes: Syncing photos
Click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.) If you don't see your device, choose Hide Sidebar from the View menu.

How to display a BLOB (Image) in a EBS Report?

User requested to add a Logo image to a report which is called from E-Business Suite (EBS).
The image is currently stores in a BLOB column.
How can I make the image to display on the report?
Thanks!

I was trying to use the BLOB and display the image in a report.
Per your suggestion:
"Select the column in your query.
Create an item in the layout editor and set the source to this column.
Set File Format to Image."
My question was I dont know how to "set the source to this column" as you described above.
So, to work around it, I moved the image file phyically to the UNIX file system.
Then, created an item in the layout editor which required a valid "image file path" the property palette.
Since, the report was created under windows, it did not validate with UNIX file path.
That's why i need to perform extra steps to get the file path correct to work in UNIX.
EDIT:
I guess when you said "set the source to this column", you mean to map the "Field source" attribute in the property palette to the database column from query.
But depends on what item you want me to create (I created a "Link File" item) and it does not have the "Field source" attribute available to map to a database column.
Edited by: user595907 on Sep 21, 2009 9:47 AM
Edited by: user595907 on Sep 21, 2009 9:54 AM

E71 How to do I stop Image Store deleting my Wallp...

Similar Messages

Maybe you are looking for