E71 - How To Get Audio To Playback in Stereo?

Is there a way to get headphones to playback in Stereo mode? I've tried the earbuds that came with the phone, as well as an old set of Sony Stereo headphones I have - listening to music downloads from the Spotify App as well as just using earbuds/headphones in normal phone mode (calls, voicemail, etc) - both only playing in Mono mode (no sound at all from left channel, only right).  I'm using a 3.5mm adapter, if that makes a difference?
Any ideas on how to fix this?
Thank you!

How many rings (metal conductors) are on your adapter?  If it's three rings, that's the problem.  You're getting only right channel audio, microphone, and ground.  See http://en.wikipedia.org/wiki/TRS_connector to read more than you ever wanted to know about mini plugs.  In particular, see the paragraph that starts "A three- or four-conductor version of the 2.5 mm plug is widely used on cell phone handsfree headsets...". Hope that helps!

Similar Messages

  • How to get audio to an overhead projector from iPad

    Hello All. Has anyone figured out how to get audio from ipad to an overhead projector? I know I could mirror if I had HD, but I do not have HD at work.

    U could try using the headphone jack sound can be output through this using the appropiate cord to connect to your projector.

  • How to get audio into Adobe Premiere Elements 12?

    How to get audio into Adobe Premiere Elements 12?
    I have filmed an air show with a very good camera JVC pro
    And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
    I think I tried everything for 4 days now.
    Sound in my computer works perfectly
    I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
    I have checked the sound card.
    Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
    It's not normal if you will keep on producing audio for over 4 days at Adobe
    The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
    My name is Thore Hult
    live in Karlshamn in Sweden

    Thore Hult
    On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
    For your immediate problem.
    What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
    Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
    for your Audio Name and Status.
    http://www.headbands.com/gspot/
    The other properties of the file there would also be of interest.
    When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
    If so, do you wait for it to complete before you move forward in the project?
    Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
    Can we assume that your troubleshooting has included checking
    a. Volume control within the project
    b. Edit Menu/Preferences/Audio Hardware ASIO
    Let us start here and then we can decide what next if necessary.
    Thanks.
    ATR

  • How to get audio out of speaker with angry birds app?

    How do I get audio from the internal speaker for my angry birds app.? Only audio is through the head phone jack......

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • How to get Audio Books loaded on to iPhone?

    Long time iPod user, got a bunch of books loaded in iTunes from using ipod. All my music synced to the new iphone, no problem once I found the right place to turn it on. Can't figure out how to get the audio books loaded from iTunes to the phone, any help?
    Thanks
    Danny

    Did that, still isn't loading them. There is an "Audiobooks" folder in my librairy and also in my device, but I can't get tehm from the librrairy to the device

  • How to get audio frequency

    hello
    This is sudhakar
    working as a programmer on Java
    now we are implementing audio recording and playing..
    but here we are facing one problem..
    that is .
    how to get the audio frequency...that is pitch but
    it variate the pitch which during the play...
    if any sample code please send them..
    j.sudhakar

    If you want to implement an amplifier like most Players have,
    that's not that easy. You will have to look for "Discrete Fourier Analysis" I think. You will have to deal with imaginary values (that is the square root of -1), if you want to write the functions up from the scratch.
    Perhaps there are some prewritten function, you can use.
    Good luck
    Djamal

  • How to get audio clips to play at site but not actually download?

    Would like person to be able to listen only to audio clips but not to be able to download clip to add to their iTunes library. In other words, am selling an audio product, and while I'd like people to be able to hear samples at my site (built with iweb), I don't want them to retain clip. Any suggestions on how to accomplish this would be much appreciated!

    Stopping people from downloading anything that's published to the internet is virtually impossible.
    I would recommend that you first edit your files so that you only have about a one minute clip online....
    http://www.iwebformusicians.com/AudioFiles/Import.html
    Dragging you files onto the iWeb page is not the best way to present them as a large percentage of PC users won't be able to play them. The Wordpress standalone flash player is still about the best way to play audio and you have to know how to get into the source code to be able to download the files....
    http://www.iwebformusicians.com/MusicPlayers/FlashPlayers.html
    Or use a flash jukebox....
    http://www.iwebformusicians.com/Website-Music-Movies/Flash-Audio-Jukebox.html
    For the increasing number of people using iPhone/iPad you can use this dual player....
    http://www.iwebformusicians.com/Website-Music-Movies/Wordpress-Flash-HTML5-Audio .html
    or have an alternative page using HTML5 players.....
    http://www.iwebformusicians.com/Website-Music-Movies/HTML5-Audio-Player.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • How to get audio files to play on iTunes

    So i've been rendering audio files recently and tryring to get them to play on itunes. Once the files are on my desktop i don't know how to get them to play on itunes. I tried right click opening them in itunes. I've also tried draging and dropping them with .mp3 and .m4a but i don't know what else to do. Pls help

    What format?  Will they even play in Quicktime Player?

  • How to get audio back into iMovie in sync

    I have an iMovie project made up of around 40 clips. I want to adjust the audio "on the fly" because the iMovie normalize does not work across clips (and none of the work arounds posted work). Not to mention the rubber band from previous iMovies has been taken away. I know how to extract audio from a QT movie and open it in Logic Express or Garage band to adjust the sound. But how do you get it back IN to the original movie and be in sync? I tried it and the audio came back shorter. I could shoot whomever at Apple removed the rubber band audio adjustment from iMovie. That was an inexcusable and callous move. How do I get the movie back in place after I've adjusted it? Thanks.

    You cannot sync anything back to the camera roll.
    The camera roll is where pics/vids are stored temporarily until you get them imported into your computer. Camera roll is not a good place to "store" pics/vids. You should always import them as soon as you can and back them up so you don't lose them.
    You can then sync them back to your photo gallery (pics) and your ipod video section ( for videos).

  • How to get audio files to follow project tempo??

    Im tryin to figure out how to get my mp3 audio files to follow project tempo and transition up or down to any specific tempo.. is there any way of doin it? thanks

    Hi,
    Yes, you need to convert them into Apple Loops. First, you have to convert them to either AIFF or WAV format (or use the original WAV). You can do that in the Audio Bin. Drag the converted file onto an audio track.
    In the Arrangement window select the newly created region of the audio file. In the Arrangement window menu under 'Audio', choose >Open in Apple Loops Utility...
    Next, take look at p 618 in the LP8 Manual 'Creating Apple Loops in the Apple Loops Utility'. That should/may get you there.
    regards, Erik.

  • How to get audio to play through TV?

    I have a Thunderbolt to HDMI cable and can only get video to show up on my HDTV screen. I am trying to get audio to play through the TV as well, but it only plays through my Macbook Pro. Any suggestions?

    Hi ajlarson6,
    I found some information concerning the settings that need to be in place to play audio through a TV:
    OS X Mountain Lion: Use a television as a display
    http://support.apple.com/kb/PH10671
    I hope this helps!
    - Ari

  • How to get audio to tv from 4 year old macbook pro

    I have a 4 year old macbook pro, i am trying to view it on my samsung tv, i can get video thru the mini port adapter and hdmi cable, but i cant get audio?

    If you Macbook Pro is a 2009 model the mini display port does not carry audio. You must use a separate audio cable from your computer's audio out to your TV's audio in.

  • How to get audio to play on Ipad using flash cc html5 canvas

    I'm using flash cc html5 project type. I built my project and tested on desktop and it works fine. Once test on ipad it does not play the audio. It works on android  devices but not my ipad 4. I'm using Mp3 files in my flash project.
    I tried the safari & Chrome on my Ipad neither played the audio in my file.
    Links to my files.
    http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.html
    http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.js

    Thanks I read through that. I still cant determine what exacty my issue is.
    Is it audio must be played only on a click handler?
    Is it that i must install quick tiem on my ipad?
    So i have to modify code that flash outputs for me to get audio to play on an Ipad? That doesnt seem correct? It should just function.

  • How to get audio to work on tv from computer

    Ok so i just bought this desktop. I want to hook it up to the tv so i got the DVI-D to HDMI cable and i also hooked up the audio cable (the one with the red and white plugs on the end) as the instruction in the tv manual said It didn't say anything about the setting it just said to make sure it was hooked into HDMI2 which i did. But i still can't get audio to play on the tv. I even checked the enable/disable devices in the sound option its only the one thing and it says its enabled. I'm not sure what else to do. I got the DVI-D to HDMI and audio cable because i didn't want to have to install an hdmi port (also idk if it would have enought space for one) Am I missing something? this is the link for the desktop i bought. http://www.bestbuy.com/site/hp-slimline-desktop-intel-pentium-4gb-memory-1tb-hard-drive-black/7117169.p?id=1219668751581&skuId=7117169&cmp=RMX

    Hi, HDMI carries sound but DVI does not carry sound. You need another cable from line out or headphones to your TV OR you can use something like:     http://www.walmart.com/ip/Startech-DVI-to-HDMI-Video-Converter-with-Audio-Universal/19339016    http://www.walmart.com/ip/DVI-R-L-Stereo-Audio-to-HDMI-Converter/40500619    http://www.svideo.com/dviaudio2hdmi.html Regards.

  • How to get audio for HP 2311x monitor to work??

    I connected my HP Folio 13 laptop to my HP 2311x monitor through HDMI. However, I don't get any sound from my laptop's speakers (the monitor doesnt have internal speakers).
    How can I get the audio to work? 
    This question was solved.
    View Solution.

    Hi,
    Since the monitor does not have speakers, no point to enable HDMI sound, please disable it:
    (a) Right click the speakers icon,
    (b) Open Playback Devices,
    (c) Right click and Disable HDMI sound:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for