E71: List of non-working Bluetooth devices - & the...

For those of you unlucky enough to be struggling with the E71's buggy Bluetooth (see /discussions/board/message?board.id=connectivity&t​hread.id=18316), I thought it might be helpful to compile a list of Bluetooth devices that the E71 can and can't get along with. The main issue as you will see from the above thread is that sometimes the phone will disconnect regularly from the device, sometimes mid-call. It make take a reboot or two to experience this, and another reboot to clear it, but it always happens again.
As I cannot edit this post after a time limit, the list can be found here:
http://www.howardforums.com/showthread.php?t=14328​67
Please reply to this thread with *ONLY* the name of the device and whether it works or not (you can elaborate on what the bug is). No chat please. I will then add it to this message.
I hope this helps users, and helps Nokia see just how bad the problem is.
Message Edited by nokkyear on 16-Sep-2008 12:45 PM

What's more, they don't even show on the bluetooth devices list..

Similar Messages

  • Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

    Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

    Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
    The usual troubleshooting steps are, also remember to test it after every step:
    1. Restart
    2. Reset
    3. Restore from backup
    4. Restore as new.
    If no joy, make an Appointment with the Apple genius and have them evaluate

  • IPodTouch SDK for non apple bluetooth device

    I need to know if I can programmatically connect my iPod Touch (OS 3.0) to a non apple blue tooth device using the Apple iPod SDK.
    I know that I can connect my iPod Touch (OS 3.0) to other iPods using GameKit API, But can I connect to other non apple Bluetooth devices?

    But can I connect to other non apple Bluetooth devices?
    An iPhone or touch will connect to non-Apple branded devices via Bluetooth now, such as Motorola headphones or Jensen car stereos for audio playback and phone calls.
    You need to specify what you want to do exactly if your plan is outside those types of connectivity. Other uses can include proximity and remote speaker applications.
    You might want to look over the External Accessory framework, released with 3.0.
    ...keep in mind, however, that the only way to communicate with other BT devices via the EAF is if they are in the 'Made for iPod' accessory program. http://developer.apple.com/iphone/program/accessories/
    However again.... Even though they communicate through standard BT connections, accessories need special hardware in order to process the data stream coming from the iPhone / iPod touch. Unfortunately, this may mean that any idea of communicating with generic BT devices won't work on iPhone OS 3.x.
    If the devices you want to talk to are Bonjour-discoverable via WiFi, they don't need to be part of the MfI program. Does that sound like your case?
    Also you may want to keep in mind that 3rd. party devs in the future may release dongles that connect via the 30-pin dock port, providing access to existing BT devices. If said devs opened their communication protocols, that might enable the goal of communicating with said devices.

  • Does a non-apple bluetooth device such as a mouse need a dongle with Mac MIni?

    I have just ordered a referbished Mac Mini. I know the Apple Bluetooth Wireless Keyboard does not need a dongle, but I am curious if non-Apple bluetooth devices such as a mouse need one?

    No, they do not need a dongle. They can use the built-in BT

  • Editing Working Days/Non Working Days in the base Project Calendar PWA

    Hello Experts,
    I am attempting to edit working days/non working days in the base project calendar PWA 13. I receive an error message when I attempt to open the base project schedule.
    I click the "edit" button under "Enterprise Calendars" page.  The error message states:
    "This Project Web App feature requires at least Microsoft Internet Explorer 8.0"  (using Chrome)
    Attempting to Opening PWA in I.E. I receive a different error message stating that I need Project Professional installed on my computer and it cannot find the current project.  
    I have Admin rights, I have project pro, and Im able to access any project or function using PWA and Project Pro. Can you tell me what I am missing (detailed steps--kinda new to PWA)
    Thanks so much.  

    If you allow me to jump in, I'd advice you to first open MS Project Pro and then try again.
    Also check that your MS Project Pro URL account do not finish with /default.aspx.
    Finally ensure that your PWA URL is in the trusted site and eventually add it to the compatibility sites.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Its a 5S,I couldnt automatically connect to an already paired bluetooth device the next time.Have to forget that device then re establish each time.Am i missing any setting that does it ?Also

    Its a 5S,I couldnt automatically connect to an already paired bluetooth device the next time.Have to forget that device then re establish each time.Am i missing any setting that does it ?Also if i turn on the bluetooth via settings and turn off it via control center,the settings page still reflects its on ,is that a bug in IOS ?

    What kind of Bluetooth device?
    When you turn it off in Control Center, are you looking at the Settings page? If so, you need to close control center for it to reflect the change. When you turn Bluetooth off in Control Center and look on the Status Bar, what do you see? Do you see the gray Bluetooth icon? If you have Settings closed and turn Bluetooth off on the Control Center and then open the Settings app, do you still see Bluetooth enabled?

  • I have the new iphone 4S (this is my first iphone) I am having trouble connecting to my bluetooth device - the iphone is searching for the device but won't recognize it (my bluetooth device is a jawbone)

    My iphone 4s does not recognize my bluetooth device - I don't know why
    My bluetooth device is a jawbone and I have turned it on and sitting next to my iphone which is searching for bluetooth devices but will not recognize it
    Not sure why

    dugasgre wrote:
    Thanks for the advice
    I just tried turning the jawbone off and then turning it on and shaking it 4 times but the iphone 4s still won't recognize my jawbone
    Do I need to unpair the jawbone from my blackberry first?  And if so, how do I do that?
    so after double shaking, is the ring flashing red +white? If it is not, then it is not in pairing mode. (I'm assuming you have the ERA) And you see nothing on the iphone? Nothing is found? Or is the device found, but not paired.
    try placing the jawbone in pairing mode first, and then turn off/on the iphone blue tooth.
    I don't think you need to unpair with the BB. But you can try. go to BB settings and there should be a way to  forget the device.

  • I've update iOS devices to 8.0 and now need to update xCode, but keep getting "unknown error -50" leaving me with a non-working internet connection - the only fix seems to be reboot of both iMac and router - any ideas?

    Having updated all my iOS devices to iOS 8.0 I now need to update xCode to match. I've tried several times, and on each occasion have received an "unknown error -50" message after getting about 500Mb. After this my internet connection appears to be fully occupied, and the only fix appears to be a reboot of both the iMac (2.5GHx Core i5, 4Gb RAMm OS X 10.9.5) and the router (Netgear DG834 v5, firmware 1.6.01.34) At first I thought that the error had not stopped the download, but after waiting for 30 minutes the connection was still unresponsive, though traffic was indicated as passing through but the router status page, and no additional content had been added to the download. Anyone else having a similar problem and different ideas as to fixing it?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Would my iMac connect to non apple Bluetooth devices?

    I have some ordinary speakers which are plugged in to a logitech Bluetooth adapter. If I were to buy an iMac, would it be able to connect to them or not? Also, it would be nice if someone could persuade me to actually buy an iMac, IS IT WORTH IT? :D
    Thanks

    You should check with the system requirements for your Bluetooth adapter.  Regarding buying a iMac I would just say go to an Apple Store and play with a Mac for an hour, You will be coming  home with one.

  • HT201371 I have a brand new 5S running ios 7.04. There's no "Edit" button on the screen, no apparent way to delete a non-working scan and the scan part does nothing. ios bug or ???

    I have a brand new iPhone 5S running ios 7.04. I can't get the "Touch ID" to work and I'm convinced it's a software issue. I read Apple's post on the subject (iPhone 5s: Using Touch ID) and the screens they show in the article are NOT what I have on my phone. Mine has no "Edit" button and there appears to be no way to delete a failed scan. The rest of the OS seems to be okay - I've no idea what to do.

    I'm not sure why you are not seeing the Edit button. I have it on mine. However, you should be able to delete the finger by swiping it from right to left and a red delete button should appear.

  • No items show in bluetooth device list - T61 6459CTO Vista Biz 32

    i have 3 working bluetooth devices (keyboard and 2 mice) - but none show in control panel > bluetooth devices.
    they were there at one point in time - but after doing lenovo suggested updates, well you know.
    just an annoyance.

    i have 3 working bluetooth devices (keyboard and 2 mice) - but none show in control panel > bluetooth devices.
    they were there at one point in time - but after doing lenovo suggested updates, well you know.
    just an annoyance.

  • HT4972 My iPhone 4 is using 4.3.3 and I want to update to iSO 6.1.  I can back it up and it starts to download it through iTunes but then I get an error message 0xE8000067.  Tried all the things on the apple support site.  None worked.

    My iPhone 4 is using 4.3.3 and I want to update to iSO 6.1.  I can back it up and it starts to download it through iTunes but then I get an error message 0xE8000067.
    Tried all the things on the apple support site (checked USB port, deleted the 3 exe files in Task Manager, tried a new cable).  None worked.  Got the same message on my old computer.
    Any ideas??

    Amazing help from apple support over the phone.  Restoring the computer fixed the problem.

  • URGENT: Add Non-working day value to the next working day

    Hello expertz!
    I have a requirement were i need to shift the values of the non-working days to the next working day. The report allready works, showing only the values for the working days, but for example if i have the amount of 100 on 06.12.2009 (saturday) i want that this value is added to the amount of 09.12.2009, which is the next working day.
    Does anybody knows a solution to do this? Is this possible in BEx?
    Please advise if you think this is not possible.
    Thanks for the help.
    Nuno

    Hi Anil,
    I really appreciate your suggestion, but i'm still not getting the point. How to store the value of the non-working day in a variable and then add it where? Can you please clarify?
    Thank you very much for your help.
    Nuno

  • How come the Peripheral Bluetooth Device is not recognized?

    »HP Pavilion dm4t-1200 CTO Entertainment Notebook PC 
    Originally Windows, possibly NT(since I last spoke with Customer Care) 32-bit
    "No bootable drive detected", " Microphone does not work", "Bluetooth Device Not Recognized"
    My bluetooth from my phone can not  transfer files, and vice versa. I have deleted and added a new device mulitple times, but to no success.

    not in all countries does apple sell tv show you can see in iTunes on a computer if tv shows are absent there also then apple does not sell them in your country

  • Why doesn't my 2015 macbook air connect to any bluetooth devices?

    I have recently bought a macbook air, having been out of the apply world for a number of years.  Stupid me, but I just presumed that my up to the minute, expensive  new laptop would connect to my non-mac, not brand new, but only a couple of year's old, bluetooth devices, the main device being my wireless speakers.  Sadly, this is not the case so I am unable to listen to any  music from my iTunes library through my speakers using my 'all singing, all dancing', amazing new macbook.  I am pretty annoyed by this to say the least.  I can't even find any meaningful advice or guidance to tell me if this is a honest to goodness fact, 'no, you can't connect it' or whether it is something that I could rectify via downloading something or even taking it to someone more techy.........so frustrated!!!!!  Please help!!

    Manxtree ~ Go to Apple's Knowledge Base HERE and, into the search bar, enter: Mac Bluetooth speakers and then click the Search button. In the resulting list of hits you should see one called "OS X Yosemite: Set up Bluetooth audio devices". Click on it.

Maybe you are looking for

  • Had to erase and re-install. No longer can find Garageband and other apps. Where can I re-doanload these?

    I have had this mac for years. It's one of the very first Macbook Pro models with Intel processor. It originally came with OS X, and I have the install disk here. I upgraded to Snow Leopard when it came out. Recently my disk failed and I had to Erase

  • OC4J 9.0.3 ClassCastException instability

    Hi, I´m trying to use OC4J 9.0.3 StandAlone, I packaged the app on a EAR and deploied them using JDeveloper 9.0.3. The deploy was fine and the app runs nicely for about 3 or 5 hours but then the OC4J throws ClassCastException when I try to access one

  • Is there any way to re-install an app on my iPad 2 without synching?

    I deleted and now want to re-install an app on my iPad 2. The App store tells me it's installed and I didn't see any way to re-install it from there. Is there any way to re-install just one little app without having to haul out the big ol' laptop and

  • Qosmio F10 - need recovery CD

    Hi guys, I lost my recovery CDs that came with my computer, and I'll really appreciate if somebody help me get one. Thanks in advance evalulo

  • How can I make a wall in a game AS2

    Earlier I've declarded my speed_var as 5 and allocated it a button so it moves at 5 pixles so in theory it should stop, have I written it wrong? player1_mc.onEnterFrame = function(){ if (this.hitTest(wall1_mc)){   trace(this.hitTest(wall1_mc));   spe