E71 local search plugins not loading since firmwar...

Has anybody else encountered the problem?
all that is showing up in the search app is the web search end the search on the mobile itself.
the plugins with the local (yellowpages...phone book.... ) information based on the region you provide are not loading.
before the firmware update local search was available.
I also notice search is no longer available for download from the nokia site (broken links)..
Please help.

this probably is a case of a bug in ur device so what u can try are: plz make a back up
take out your sim card and put in *#7780# to restore factory settings. you should not lose any data, but all settings will go into default. try that first.
the second option is a reset *#7370# this one will erase all of your data, 'wipe the phone clean' and restore to factory settings. see if any of these options work and if you are able to use your phone as you like/need to.
the third option U can go in for a hard reset which will turn ur device as it left the factory totally new
U can also update/reinstall ur firmware and see the result...
Also use ur device without the memory card and see
in case of ur memory card there are different options available to you to get rid of the corrupt/unwanted data in your card.
menu--tools--memory---options---format memory card......
remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
or insert ur card in any reader or laptop and check for virus and also the hidden folders.......
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Similar Messages

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

TOC, Index, Search content not loading in FireFox 3.0 +

Hi,
I have created from RH 8 a merged Webhelp system (1 master, 2 children - based on Peter Grainge's posted procedure). It works fine from IE, and on my system, from FireFox 3.0 and up.
The problem is, that when deployed at the customer's site, the TOC, Index, and Search content does not load in FireFox. All frames display (Nav, contents, and the top frame), but the content for the TOC, Index, and Search does not load.
This only happens at the customer site. The webhelp system works okay in IE.
I have checked and we are running the same javascript version, have the same security settings in FireFox set.
I looked on Peter's site and implemented the redirect fix for FireFox that he has posted, but that hasn't seemed to fix the problem.
They aren't running any special toolbars (like Google toolbar). I am checking on add ons.
Does anyone have any ideas on what else I might check or better yet what might be causing the problem?
Thank you,
Tannis

Willam
A merge will not work properly unless all the projects have been generated once. After that it should not matter that a project is missing, indeed simply not publishing one of the projects to the server is one of the features of merging making it easy to supply different customers with different content.
I wonder if the problem you saw was because that project had not been generated.
Tannis
Sorry, the reference to AIR help was because you mentioned Snippet 141 which is AIR specific. I didn't look further back in the thread.
You said that the start page of a child project opens the tripane window with the default topic but you do not get the TOC etc. That rules out the merge being the problem. I am inclined to the view that the server is the issue so get your client to load the published output from my merge demo as that is a known quantity. Ask them to open each child project in turn and then finally the merge.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Online card security Verified by Visa and Mastercard Securecode will not load since Firefox updated so unable to make purchases using Firefox.

The additional Fraudsafe security feature used by Mastercard and Visa when buying products will not load since the Firefox update so no purchases can be made and I have to swap to using Internet Explorer instead :(

Just found a previous post also reporting this problem https://support.mozilla.com/en-US/questions/818366?s=visa&as=s

Finder not loading since upgrading to Yosemite

Hi Everyone,
I have a 2012 Macbook Pro 15" model.
Intel Core i7 processor and 8GB RAM. I upgraded to OS X Yosemite yesterday from 10.8 and since then, I've been experiencing longer boot times, Finder not loading my local files and folders, Launchpad stuck in the "Loading Applications..." state, Spotlight search either not working or loading terribly slow. Even when I save out files from applications like Photoshop to the desktop or another folder, the update file or new file doesn't appear in the folder at all. It's there, because Photoshop's Finder view shows it, and using an Upload form can find it but other than that it's not there.
Finder is stuck in the spinning wheel state and doesn't load my folders and files on my local machine. I'm connected to a Network drive here at our office and I can view the files on that fine. I've tried relaunching & restarting but nothings work. Considering doing a clean install of Mavericks now as I'm at my wits end.
Any help at all would be appreciated.
Thanks,
Brinard

brightdust and FlyGirl_1350 are exactly right. You need version 9.6 of iPhoto and it's about 1.14GB in size to download - so get ready to wait a while unless you have a pretty fast internet connection.

CS4 plugin not loaded

Since CS4, I get a notice that a few plugins aren't being loaded and I
checked the system log, but it doesn't tell me which ones are not compatible
or not loaded... Anyway to tell which ones are not?
Jeff

Locate the plug-in in the Finder, highlight its icon and do a Get Info (Command+I). The Info box should tell you whether it's a Universal or PowerPC plug-in. PowerPC plug-ins will only run if you can run Photoshop in Rosetta emulation. Universal plug-in run native on MacIntel machines.
<br />
<br />c
<a href="http://www.pixentral.com/show.php?picture=1Qb6FtW1bXRwI1uP2TmMqSi3Mf39O0" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1Qb6FtW1bXRwI1uP2TmMqSi3Mf39O0_thumb.jpg" border="0" />

Movie not loading since player 10 update

I have a client that with a flash website that we did not create but that we are hosting, so we do not have the source files. Since updating to flash player 10, the swf file load screen appears, but then I get a black box and it says "Movie Not Loaded". I assume it's trying to call an external .flv file, but since I don't have the source files I'm not positive. The site still works fine on browsers with Flash Player 9. Any suggestions?
Here is the URL - http://www.footsaver.us
Thank you!

Hi, I would start a thread in the Flex or Action Script forums to receive better help. A list of the Adobe Forums are here under
Select Forum http://forums.adobe.com/index.jspa
The Flash Player is a browser plugin, not a standalone Player.
Hope that helps.
Thanks,
eidnolb

Full-Text Search has not worked since we upgraded to 2012

I have a filestream database and table. Our full-text searches have always worked until we upgraded to SQL 2012 in December. Now, no file that has been uploaded since December is searchable. What has gone wrong here. It should have been
a clean upgrade. We are not getting any error messages. We are just not getting any records returned when we search on a word that we know are in the documents we've uploaded since December (for instance, the word 'aluminum').
Filestream is enabled for the instance.
A full-text catalog exists and contains a full-text index (the same one we've always had). Full-text indexing is ENABLED.
I've tried rebuilding the catalog and the index. I've tried to do a FULL POPULATION on the table.
We haven't changed our queries nor the way the files are uploaded.
Nothing works. I have been a database administrator since the SQL 2005 days and I have never seen anything like this.
Please help.

Hi GINGER PIERCE,
Since the issue regards SQL Server Search. I will help you post the question in the related forums. It is appropriate and more experts will assist you.
According to your description, in theory , if you can do a full-text search for SQL Server 2008, when upgrading the SQL Server version from 2008 to 2012, the Full text indexing feature should be run well in SQL Server 2012 databases. If not , you can try
to restore your database from SQL Server 2008 to SQL Server 2012, create an new Full-Text Catalog and Index on the table or view in the database, and then use Full Text Index to search words, phrases and multiple forms of word or phrase via FREETEXT() and
CANTAINS() with “and” or “or” operators. check if it is normal that the full-text search feature is enabled in the SQL Server 2012 instance. For more information , see:
Full Text Search step by step in SQL Server 2012.
Note: In SQL Server 2012 SP1 ， the server will report that Full Text Search is not supported in this edition of SQL Server when it clearly is. The workaround is to create the initial catalog by using a T-SQL query:
CREATE FULLTEXT CATALOG
In addition, since it is a fileStream database, we need to verify if you do Full Text Searches on documents in FileTables, if yes, you should enable FileStream database for your SQL Server, and enable FileTable options for the database. For more information,
see:
Full Text Searches on Documents in FileTables.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Filter plugin not loaded everytime

Hi,
I am currently writing a filter Plug-in for Photoshop but I'm having an issue and can't find any clue of what is causing it.
My plugin is sometimes loaded by photoshop and sometimes not. When it is not, deleting the 8bf file and doing a rebuild of the project works, without modifying anything in the code. Sometimes I have to rebuild many times until the plugin gets loaded, which is anoying...
First I checked that the sdk version in the .r file was correct: Version { (latestFilterVersion << 16 ) | latestFilterSubVersion }, the entry point is the same as in the dissolve example.
I thought that photoshop may cache the plugins to load them faster and that the new version isn't seen (like when I build many times a minute), but I figured out that when a plugin is loaded once, it is always recognized.
One thing that I've noticed is that when my plugin is loaded, if I go to Help > System Info..., there is no version number for my plugin, that may cause the issue but I can't find in the dissolve example where this version 13 comes from. I thought as well that maybe the resource isn't compiled correctly sometimes but it is strange and unlikely I think (maybe still worth mentionning).
Does anybody have any clue / suggestion? It's been 2 days that I'm trying to figure out what's going on and it starts to drive me crazy...

Hi
Are you developing for Windows or Mac?
I had a similar problem with Windows. I found I wasn't compiling the correct pipl files (my .rc file wasn't including the correct pipl files). Tidy up/delete any pipl files and make sure 100% you're including correct pipl files.
I also had a problem when switching between 32/64 bit builds. For example, when compiling a 64 bit plug-in, VS2010 would sometimes not force a rebuild for the .r file (to generate .pipl for 64 bit) and would then include the 32 bit pipl (leftover from the 32 bit build). This meant that my plugin wouldn't appear in 64 bit Photoshop (because the pipl was invalid). For me the solution is to either delete any old pipl files before compiling, or being mindful to do a rebuild of pipl files when switching from 32/64 bit builds. I could also have created separate pipl builds for 32/64 bit and made sure correct one was being included.
When the plug-in doesn't appear in Photoshop, eliminate all the obvious bits (like plug-in paths), check your DLL exports, then check the pipl. I don't think it's the version number, but someone with more experience than me might point you in a better direction.
Jamie

PlugIn not loading Acrobat 8

Hi,
We migrated old version(Ver 7) plug in to Version 8 using 8 SDK libraries and VS2005.On development box it's working fine according to our requirements, but the same plug in file is copied to plug_ins folder of other machine having acrobat 8 but the plug in is not loading.
please give some solution.
Thanks

Compiled in debug and release mode.
But i took the release version to copy to other machine.
First step is to make work in other system having acrobat professional edition..
Then our final goal is to distrubute this PlugIn to external users.
Users may use any edition like professional ,reader or standard.
After completion of first step then we will do reader enable.
Both(debug and release) are working fine in development machine having Acobat 8 and VS2008.
Thanks,

IDCS5 Mac - release plugin not loading

I have several "release version" plugins that are not loading on my CS5 Mac machine.
The Porting Guide says that if the folder is inconsistently named with the plugin or if a resource file is missing, the plugin will not load.
I carefully checked the package and the folder is named the same as the app file (with the exception that the folder also has ".InDesignPlugin" added to its name--I am assuming that variation is acceptable).
I checked the folders and the files in the folders between the debug version and the release version. With one exception the release resource folder mirrors the debug resource folder. That difference is in the presence of a single file: timestamp.
Where does it come from and how can I get my release version project to generate one?
Are there other possibilities I should look into?
TIA!
R,
John

Dirk:
You correctly guessed the problem. Actually, what was happening was that I was using MySQL in both plugins. Because I was developing on my computer, I of course had the MySQL libraries loaded, but the production computers had the wrong libraries installed. With the help of a colleague (Dan Morris deserves this credit) the above fact was discovered. I dropped back a couple of versions in the libraries I was using, recompiled, and the problem was resolved.
Take care,
John

IPhoto library not loading since lion upgrade

Hi,
Since upgrading to lion, iphoto will not load the iphoto library anymore. iPhoto starts with the error message "your iphoto library is either in use by another application or you don't have permissions...". iPhoto was perfectly running on 10.6 (a few days ago) and luckily i have some time machine backups from before the lion upgrade.
So i tried
-to start iphoto with option+control and rebuilt the library. Unfortunately it stops with item 9000 or something.
-tried to rebuild the library with iphoto library manager, but it causes so many problems with duplicates that i stoped the process. I guess it would probably fix the library but too much hassle.
-tried to restore the library from time machine -> same error message
Has anyone experienced same behaviour after upgrading to lion? It's too bad i can't just restore from the backup (i thought that's the point of having it) but may lead to the idea, that the iphoto application might be corrupted. I tried to download the ilife image from my university's software distribution server again, but last but not least, lion does not support the server version anymore "the version of server you are trying to connect is not supported...." So no download right now...
Thx for any help and hints
regards, dorian

Hello,
I am having this extremely frustrating problem as well. My iPhoto was working perfect two days ago and today after installing an upgrade (i always keep up with them) it refuses to load and all i get is a white gear looking shaped loading symbol.
Help anyone....??
Thanks!

Email not loading since update to 2.0.1.668

Hi BlackBerry Helpers,
Ever since the update to 2.0.1.668 the email app is not loading.
But when I restart my PlayBook it loads once but if i close it and open it when i get a nofication it dont load again...unless i restart it, it goes round and round in a cycle.
I don't know if it is because of the update or something i have done.
Please help, thank you
Solved!
Go to Solution.

pcantellow wrote:
Hi BlackBerry Helpers,
Ever since the update to 2.0.1.668 the email app is not loading.
But when I restart my PlayBook it loads once but if i close it and open it when i get a nofication it dont load again...unless i restart it, it goes round and round in a cycle.
I don't know if it is because of the update or something i have done.
Please help, thank you
pcantelow, on your PlayBook, at Options > Accounts, delete the email accounts.
After doing so, touch the battery icon > restart.
Return to the Options > Accounts and add back one of your email accounts.
Now, does it work? If so, go back and re-add any additional email accounts.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Purchased items will not load since iOS 6

Both iPhone 5 & iPad 3 on iOS 6 will not load purchased items tab in the App Store app.

Yup, did that also signed out & back in multiple tones on both devices.
Have reset network settings, have hard reset devices,
Have restored device both from icloud and once from Mac as NEW as well
As restore.
I can't see how this can be a device issue as both iPad & iPhone became unable to load
Purchases as soon as iOS 6 came into the picture.
Feels like its an iOS 6 issue or an apple I'd issue,
But since others are having it as we'll it must be iOS 6.

Facebbok V 3.3.0.11 News feed not loading since today morning after the incident impacted BB6 + OS devices

I am using BlackBerry 9350 since 1 year almost without any issue. Now today morning RIM NOC team notified me for an incident impacted Browsing/ FB/Twitter apps. Once the thing restored everything started working except my Facebook.
The news feed or FB wall is not loading and giving error 2001 (Facebook returned an unknown error) rest everything FB chat, Profile, Frnd list is working. I have tried reinstalltion/ deletion of App through App world & desktop manager but nothing helped to resolve this.
Please post some solution as without Facebook wall its useless to use the FB and BB service.
Sidhartha
PIN: 331156F7

Im glad im not the only one either ive had this problem since this morning and was starting to lose the head! I've tried everything -uninstalled /reinstalled FB, taken my battery out but nothing has worked. I cant even log into my FB now!
BB are saying this message is coming from FB well i can get onto my FB using the computer just not using my BB, people who have other phones aren't getting this problem only BB users - get this sorted BB!
This is the reason i wont be staying with BB for my upgrade in January!!

E71 local search plugins not loading since firmwar...

Similar Messages

Maybe you are looking for