E71 looses signal and disconnects when in remote S...

Regarding E71 and remoteSIM mode:
Anyone experiences the same problem as I do, that the phone is loosing signal and few seconds later disconnects from the in-car bluetooth (VW Touareg with RNS-510 module)? Mine keeps disconnecting, E61i did not do that. When driving E71 stays connected to in car system for maximum few minutes and than looses signal first and disconnects shortly after that.
Anyone here with the same car (unit) combination who could confirm/deny?
Thanks
Solved!
Go to Solution.

Still no solution from Nokia here.
Make sure your RNS 510 (build in VW multimedia unit) has the newest firmware (recent is 1102). You can find out which firmware your device has by holding SETUP button when the device starts (and displays Welcome to Volkswagen screen). A new menu appears featuring the software version. Should it not appear (make sure you keep holding the button until the menu appears) that means you already have the new software version.
Many people say that this solves the problem assuming you have the newest phone version 200.21.118 from 27-11-2008. I can't check myself as I have additional device connected to my RNS (TV free). Upgrading to 1102 would disable it which I don't want, so I'm still waiting for another solution...
Good luck!

Similar Messages

IPhone loosing signal and bricking

After updating 3G to 3.1 my phone is loosing signal WIFI and bricks after I press lock. It is frustrating as I am missing my important phone calls. Messages of missed call are also not coming thru.
Any solutions. I read that even after restoring people are having problems.
Hope Apple finds a solution soon. Loosing business.
May try restoring the phone and reloading my data,which I really don not want to do.
Maybe somebody comes with a solution.

I guess I'm having the same issue... several people had complained about trying to call me without success. Every time it happens, when I take a look at the phone it states "Searching..." in the where the 3g sign normally stands. The another not normal behavior is constant failures when sending SMS... I'm forced to reboot the device. I'm almost sure that this symptoms had started after 4.2.1 upgrade.

BT Infinity Lag and Disconnections when another co...

Hello, I have had BT infinity since the 28th of January and love the new found speeds I now have. However whenever my sister uses the internet for Netflix and other on-demand streaming services my connection on both my laptop and more importantly my Xbox drops out and I get disconnected.
This to me shouldn't happen especially on an infinity line. I am on Unlimited Infinity 1 + Calls as the maximum speed for my line would be just over 40Mbps so going onto Infinity 2 would have been pointless.
Information on my home setup:
All devices are connected wirelessly - NOTE - I know that a wired connection would help but this is not possible due to distance between the router and my room. Also I think this is just a cop-out answer, it shouldn't just disconnect when another person uses it even on wireless.
There is a total of 4 devices that can connect at any one time but usually only three - The Xbox, My laptop and my sister's laptop.
The disconnections happen whenever my sister uses streaming services even at 2:00am like today which is what has brought me to this forum.
Any advice and answers would be greatly appreciated.

jonny3 wrote:
I don't think it is just my sister's laptop causing it I think its the fact she is using things like Netflix at the same time as me playing xbox. I had thought about those Powerline Adaptor's if thats what you mean by "homeplugs", but it would require me to put an long ethernet cable through the ceiling into the room above and do it from there as there would be no other way due to the location of my router.
Would that be okay?
Do these Powerline Adaptors give the same speed and reliability as a wired connection?
There is no need to install ethernet cable with homeplugs, as that's the point of them.
The major benefit of powerline networking is that users can easily establish a network using a home's existing electrical wiring as the communication medium. There is no need to drill holes in walls or ceilings to route new wiring and, as a result, installation is quick, easy and relatively inexpensive. Powerline networking is an easily accomplished networking method for AC-powered devices, which by necessity must already be near power outlets.

Apple TV3 turns off and on when using remote, already reset and restarted.

Apple TV just started acting up yesterday. When using remote, light on Apple TV would turn off and on so it would somewhat work when the light was on and would not when light when off. When light is off and in a menu selection, cursor would just move to the end of the list and stop. Already restored back to factory and reset it. Difficult to program after reset when remote only works part of the time when the light goes on so stuck in out of the box condition. Any help on this? Thanks!

Hello stiktani,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV remote issues:
Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Is it still necessary to use a third party app in order to stream SiriusXm radio signal via iTunes? Would like to use iTunes to handle the signal and send out to remote speakers?

Is it necessary to use a third party app in order to stream SiriusXm signal via iTunes to my remote speakers?

Is it necessary to use a third party app in order to stream SiriusXm signal via iTunes to my remote speakers?

ICloud Drive causing timeouts and disconnects when uploading

It seems that iCloud Drive is set to use the maximum upload bandwidth possible when adding files to it. I have a home internet connection with fairly limited upload bandwidth (1Mbps - Time Warner Cable apparently doesn't think there is any need for more than that). When I add files to iCloud Drive and they begin to upload, everything else I am doing online quickly times out and eventually disconnects. As far as I can tell, there isn't any manual control for how much upload bandwidth iCloud Drive can use. Dropbox and other cloud services have such a setting but it seems that Apple has left this out of their offering. Has anyone else experienced this?
It is probably also worth noting that this is the same thing that happens to me when I upload to iTunes Match. It seems that Apple needs to better handle users with limited bandwidth.

Hi floorram,
I'm sorry to hear you are having issues with iCloud on your devices. If your Pages and Word files do not appear to be updating on iCloud Drive, you may find the information and troubleshooting steps outlined in the following article helpful:
Get help using iCloud Drive - Apple Support
Regards,
- Brenden

Losing signal and web when on 3G

Hello,
I have started experiencing this new problem recently, maybe after getting the new update, but not sure. What happens is when I have my 3G enabled, I keep losing service from Rogers (Canada) and the 3G sign goes away too. I can see in the top-left corner of my iphone that the service strength has flat-lined and the 3G signal has disappeared. I was adviced to change my SIM card as I was using one from my old phone. I did that, but the problem persisted. What I have noticed is that when I disable 3G and be on the Edge network, the phone work perfectly. Has anyone experienced this? Does anyone have any solutions for this?
Thanks

Options are limited but include.
1. Get a new SIM card from AT&T and reset your voicemail, see if that helps.
2. Reset your iPhone (holding down the top button and home button for ~10 seconds until the Apple logo appears on the screen).
3. Restore your iPhone. If restoring from backup does nothing then next try restore as new and start over.
4. If nothing else works then call Apple or go to an Apple store and they will replace it.

IPhone 6 Plus Connecting and Disconnecting when syncing

I have an iPhone 6 Plus and when I try to sync it to my rMBP it constantly connects then disconnects. I tried using another USB port and the problem seemed to be fixed, but the half way through the sync it disconnected and started constantly connecting then disconnecting. I thought this could be because the phone is using too much power so I turned the phone to airplane mode and reduced the brightness to minimum but nothing.
Thanks in advance!

Hey Nat82,
Thanks for the question. The following resource provides troubleshooting steps if your device unexpectedly disconnects from the computer during syncing:
iTunes: Resolve USB-related alerts
http://support.apple.com/kb/TS5254
Thanks,
Matt M.

Apple Wireless Keyboard is lagging and disconnecting when using Macbook Pro via Bootcamp

Hey guys,
I am using my Macbook Pro (I think from 2009) with an external monitor and the apple wireless keyboard (connection via Bluetooth).
First when I set up Bootcamp everything worked fine. But now suddenly the keyboard is lagging (letters sometimes appear after a few seconds or get stuck and typed 20 times or something) and randomly completely disconnecting.
I already downloaded the newest drivers for Boot Camp 64bit from the apple website, but this didnt solve my problem.
I tried disconnecting the keyboard on mac and then reconnecting on the Windows 7 partition again. Also didn't work.
Of course I had to reconnect the keyboard when on the mac.
But it's not that it's not working. I'm using the keyboard via Bootcamp right now. It's just that it's randomly doing this...
Now I don't know what to do. Do some of you have the same issues or have any ideas that might help?

Hey guys,
I am using my Macbook Pro (I think from 2009) with an external monitor and the apple wireless keyboard (connection via Bluetooth).
First when I set up Bootcamp everything worked fine. But now suddenly the keyboard is lagging (letters sometimes appear after a few seconds or get stuck and typed 20 times or something) and randomly completely disconnecting.
I already downloaded the newest drivers for Boot Camp 64bit from the apple website, but this didnt solve my problem.
I tried disconnecting the keyboard on mac and then reconnecting on the Windows 7 partition again. Also didn't work.
Of course I had to reconnect the keyboard when on the mac.
But it's not that it's not working. I'm using the keyboard via Bootcamp right now. It's just that it's randomly doing this...
Now I don't know what to do. Do some of you have the same issues or have any ideas that might help?

Msn looses letters and pictures when opened

when i open msn under safari as my home page the letters,words,what ever just dissappear when the mouse pointer goes over them.i have to reload 4 or more times to get it to stop.i have since tried firefox and dont have this problem. what cause this?

Yes. Since iPhoto is now linked to the proper library you can delete those other library folders.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

TS3367 My Apple I-Pad 2 has a problem with Facetime. It freezes and disconnects when I use it.

I'm about ready to quit on this new I-Pad. When I use facetime to call my daughter, (who also got the same apple 2 I-Pad)
It calls through, freezes on her photo, then keeps trying to reconnect. If anyone has a fix for this, I would appreciate the help!

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank. Be patient, the device will power ON again in the normal way. It is app and data safe!]

HT1766 I lost my IPhone 4S this morning and want to increase my cloud storage so I can back it up when it finds a signal and then remotely erase it...I'm assuming the worst that whoever finds is will not callme or want to return the phone

I lost my IPhone 4S this morning and want to increase my cloud storage so I can back it up when it finds a signal and then remotely erase it...I'm assuming the worst that whoever finds is will not call me or want to return the phone. I went to icloud but it only govers me options to increase storage from my iPhone or a synced computer (mac or PC).

If the phone is offline there is no way to track it or send a message to it. You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does. If it does, you will get an email informing you.
You might want to read this: http://support.apple.com/kb/HT5668.

My Mac air keeps on loosing wifi and when I want to switch it on! It says wifi hardware not installed. After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.

My Mac air keeps on loosing wifi and when I want to switch it on it says "wifi hardware not installed" After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again. This is really frustrating.

I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times.

When I put my iphone5 on charge no matter where I am and even when I have full signal my phone will always drop the signal and continue to have no signal until I take it off charge. Is anyone else having this problem?

Everytime I put my iphone5 on charge now matter where I am and even when I have signal it always drops the signal and continues to have no signal until I take it off charge. I have the up to date software on it and everything and is relatively new. Is anyone else having this problem and how do I fix it?

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

Remote desktop client hangs and does not gracefully close when putting remote computer to sleep

I have my home lan setup with a VPN and a web page on my router that allows me to remotely wake my Windows 7 computer if I need to access it. Problem I have is with the RDP client on other computers or the Terminal Service (TS) on mine (I don't know which
is the issue). When I remotely tell my PC to sleep I expect the RDP client to gracefully close like it does if I select logout. Instead it hangs and then a disconnected/reconnected window pops up. I'm not sure if TS is sending the disconnect command to RDP
or not, but I just know that RDP client things it should still be connected and is trying to reconnect to a PC that is already asleep.
Is there a way to fix this RDP or TS issue or to I need to contact Microsoft more directly so they can fix it on their end?
Just to be clear the wake up is working and the computer is going to sleep when I tell it to, the only issue is that it does not appear that the RDP client gracefully disconnects from the TS when that system is put to sleep.
John B.

Hi John,
The default disconnection behavior is like what you see: just disconnect at once without any prompt message.
We have no approach to change it. It's by design.
Karen Hu
TechNet Community Support

E71 looses signal and disconnects when in remote S...

Similar Messages

Maybe you are looking for