E71 - loses functionality after fw upgrade

Hello, since I had to reconnect to wlan after every received or made SIP-call I thought it would be neccesary to upgrade fw. Was 100.07.76, now is 300.21.012. After upgrading fw, phone does not connect to Wlan other than web. Security WAP/TKIP or no security - doesnt matter.
Reflashed phone a couple of times, did not restore backed-up old settings. Entered all details on Wlan and SIP meticously, double/triple-checked everything.
Other than the hazzle with SIP-calls, the phone worked quite good on fw 100.07.76, but I thought that upgrade procedures promoted by Nokia should be fairly simple and straightforward? For instance - the "lock-code" which was 12345 (which I never changed btw) now after upgrade is another sequence of five "signs" (not neccessarily numbers, if you catch my meaning...) Furthermore - my pincode no longer is numerical, it has changed to "alfa.." that is, same buttons but not the numbers... Should the ordinary customer really have to go through these idiotic guessing-games after a trivial thing as an upgrade of fw???
I think I will have to let this e71 go and get something that works as advertized.
Beta-tester. (not by choice)

i have never experianced any trouble when uppgrading latest software, but today, after successfully upgrading the firmware, the phone asks for lock code after i input pinkode. th normal 12345, 0000 or anything else is working. The strange thing is that the feature "lock code" was never activated before.... using the alpha numeric keypad is to no help. Any other suggestion ??

Similar Messages

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

E71 wlan issue after firware upgrade

I just upgraded by E71 to the latest software version. The upgrade went without any issues. After the upgrade I realised that t had removed all my contacts - so I had to restore my backup(I restored the SETTINGS as well). I was using a app for my 'WiFi' (for prioritizing my access points) and after the firmware upgrade - I could not see this app at all. The following are my issues now:
1. I cannot connect to my home wifi(WEP) - it was fine before the upgrade. The first time it says - 'Connection not available' and every subsequent time it irritates by showing 'WLAN already active. Please close the connection and retry'.
2. I have tried to restore the factory settings and it still does not work.
3. I have renamed my Access point to the ones that the app was using - still no luck.
So, what are my options now? Can somebody please help? I never thought a small software upgrade could spoil my whole evening!

Hello,
I have just had EXACTLY the same problem.
I have a Nokia E71 and it was working OK before the upgrade. I just used the latest Nokia Updater and latest nokia pc suite to upgrade to 500.21.009.
The upgrade performed perfectly, and after the upgrade I restored my backed up data.
I have the exact symtpoms as psankar. I have factory reset the phone and tried again. Same problem.
Connection not available, and then connection already active. Small Wireless icon appears at top right of screen, and stays there, but there is no active connection in connection manager.
The only way to remove the wifi icon and to get the phone to attempt to reconnect is to power off the phone, but then on reconnectig then you get connection not available and then the whole cycle begins again.
Help appreciated
TIA
Alex

Trackpad not fully functioning after Yosemite upgrade

I have a mid-2011 iMac 27". I was running Lion and upgraded to Yosemite. I have 12 gb of RAM and plenty of storage.
Since the upgrade, the trackpad no longer fully functions. It will two finger swipe up and down within a window (although even that has crashed in Firefox and the only way to get the swiping back is to close and reopen Firefox).
No three finger swipes or pinching to get to Launchpad. No four finger swipeups to get to Mission Control. No side to side swiping either.
No pinching to zoom in or out. Nothing...just two finger up/down swipes and single/double taps for left/right mouse functionality.
Keyboard works just fine. I can arrow key all over the place when the trackpad crashes, but that is a pain.
I've tried everything I've read so far.
I've turned off WiFi as I read in one of the threads that was a fix for someone else.
I've removed the trackpad from Bluetooth, turned it off, shut down the Mac and after rebooting then reassociated the trackpad when the Bluetooth prompt comes up. Nope, doesn't work either although others have said that works for them.
I'm frustrated as I swipe all the time and would like to retrieve that functionality. Help!

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Missing functions after Tiger upgrade

Several of my iBook G4 video functions have disappeared after upgrading to Tiger, I can no longer lower the resolution to 800 x 600, I tried fixing this by zapping the PRAM and deleting the window server preferences with no affect. I also can no longer adjust the brightness using the F1 and F2 keys.

I am assuming that these problems are on G4s. The following link describes how some video (OpenGL) features were accidentally left out of the Intel 10.4.7 updater-- it shouldn't affect G4s, but it makes me wonder if a similar snafu might have also happened with the PPC updater:
http://www.appleinsider.com/article.php?id=1852
Just to chime in on the DVD issue, I've got a topic up about how a PowerMac G4/867 QuickSilver would only boot to the Darwin login prompt after installing the 10.4.7 update (but I suspect user error is to blame for that particular issue). However, I also can't seem to get that machine to boot from the Tiger Install disk using its superdrive.
You can go back to an older version of Mac OS if you can boot from the Install Disk, do an "Archive and Install", then download and install the "Mac OS X 10.4.6 Combo Update", which is a couple hundred megabytes.

Acrobat Pro Calculating form fields lose functionality after enabling document for Reader

I have a problem that continues to come up increasingly. I thought I had found a work-around on some forums, but it is still causing trouble. Im hoping you can answer the question.
I am creating a form that requires simple calculations (sum and add). I can get these calculations to work just fine. However, as soon as I enable the document for Adobe Reader, the form seems to get amnesia. It loses the ability to calculate. When I go into the fields again to look at them, they still show that they are supposed to calculate, but arent working. I have to clear the calculations and completely reset them all in order to get them to function again, but as soon as I save this enabled doc, it loses its functionality all over again.
Frustrating.
I did find a work-around on a forum, but have only gotten it to work once. It had something to do with closing and saving the document, then reopening it before entering the calculations.
Is there a clear-cut solution to this problem? The forums were rife with people experiencing the same frustrations.
Thanks ahead of time for your assistance.

Nathan,
It's fairly straighforward to set up a custom validation script for this, but it might not be immediately obvious how to do it. I'll use your form as an example. In it, you have a number of rows with a Quantity field where the user enters how many items are needed, a Price field that has as its default value the price for the item, and a Total field which is a calculated field and should be the product of the Quantity and Price fields. The only variable in the calculation is the value of the Quantity field, so this will be easy.
The Validate event of a field gets triggered when the field value is committed. This happens when the user enters a value and presses Enter, Tab, clicks outside of the field, etc. What the script should do is take the value the user entered, multiply it by the value that's in the Price field, and set the value of the Total field. The script could look something like:
(function () {
    // Get the value of this field, as a number
    var qty = +event.value;
    // Get the value of the Price field, as a number
    var price = +getField("PRICE.0").value;
    // Calculate the total
    var total = qty * price;
    // Set the value of the Total field if not zero,
    // otherwise, blank it out
    getField("TTL.0").value = total ? total : "";
What you really should do, however, is set up a document-level JavaScript (Advanced > Document Processing > Document JavaScripts...) that contains a function you can call from the QTY field of each row. The function will determine which row should be affected based on the field name that triggers it. Something like:
function calcTotal() {
    // Get the row number from the field name
    // of the field that called this function
    var row = event.target.name.split(".").pop();
    // Get the value of the field that called this function, as a number
    var qty = +event.value;
    // Get the value of the Price field, as a number
    var price = +getField("PRICE." + row).value;
    // Calculate the total
    var total = qty * price;
    // Set the value of the Total field if not zero,
    // otherwise, blank it out
    getField("TTL." + row).value = total ? total : "";
Than all you have to place as the custom Validate script of each of your QTY fields is the following:
calcTotal();
Also, make sure that you remove any calculations that you've set up on the Calculate tab of each TOTAL field. Now that the total fields do not rely on automatic calculations, it does not matter that the document is missing its field calculation order array, though this bug REALLY needs to be fixed. You should consider reporting it to Adobe. I will report it too.
Note that this code assumes the QTY and PRICE fields are numeric fields, meaning they will either be blank or contain a valid number. You've ensured this by setting up each with a Format category of Number.
George

Soundtrack functionality after system upgrade

Hi.
I have a question that I´ve been looking an answer to for really quite some time now.
I would be really grateful for some help with this
I´m using Soundtrack 1.2 for work.
I just bought mac os 10.4.
If I upgrade, how will soundtrack work with the new system?
it´s for the moment indispensable for me in my work. So it just has to work
If I need to update it, is it possible to download a standalone installer?
because i´ve already had problems with my "programm-update" as it is.
Thank you for any help,
cheers,
Robin

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Bootcamp Partially Functional after Yosemite Upgrade

Mac Mini, Mid2010, 8gb ram, 256gb SSD.
Had Snow Leopard, Win7 x64.
Had 3 main partitions, OS X, Windows (C: nfts), Data (D: ntfs)
After upgrading to Yosemite, my situation is a bit different that the other threads I've read on this forum. OS X boots fine. Both Windows partitions are visible in Finder (read only) and are browseable.
Am able to reboot into Windows as well. Loads windows, able to logon, then problems start to become apparent. Even though windows obviously booted from C:, neither C nor D are available. Attempting to run Explorer results in "Server Execution Failed" errors. Yes, task bar is visible, so it would seem that even though Explorer is technically running, I'm unable to launch explorer windows.
Meanwhile, back in OS X Land:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS OSX                     27.5 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data WINDOWS                 80.0 GB    disk0s4
   5:       Microsoft Basic Data DATA                    131.7 GB   disk0s5
I have dl'ed test disk and gdisk and am ready to do cl work, but since the situation is a bit different than the other posts, was hoping to get confirmation about path forward before I jack things up worse than they already are.
I will say that I don't remember having that Recovery Partition there on my Snow Leopard install. Am thinking that perhaps the Yosemite installer inserted that (taking space from one of the other partitions), then shifted the windows partitions out further on the disk.
Anyway, any help would be appreciated. Seems like having windows bootable at least makes this a bit less egregious than some of the other posts I've read.
Thanks,
royci

Mac Mini, Mid2010, 8gb ram, 256gb SSD.
Had Snow Leopard, Win7 x64.
Had 3 main partitions, OS X, Windows (C: nfts), Data (D: ntfs)
After upgrading to Yosemite, my situation is a bit different that the other threads I've read on this forum. OS X boots fine. Both Windows partitions are visible in Finder (read only) and are browseable.
Am able to reboot into Windows as well. Loads windows, able to logon, then problems start to become apparent. Even though windows obviously booted from C:, neither C nor D are available. Attempting to run Explorer results in "Server Execution Failed" errors. Yes, task bar is visible, so it would seem that even though Explorer is technically running, I'm unable to launch explorer windows.
Meanwhile, back in OS X Land:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS OSX                     27.5 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data WINDOWS                 80.0 GB    disk0s4
   5:       Microsoft Basic Data DATA                    131.7 GB   disk0s5
I have dl'ed test disk and gdisk and am ready to do cl work, but since the situation is a bit different than the other posts, was hoping to get confirmation about path forward before I jack things up worse than they already are.
I will say that I don't remember having that Recovery Partition there on my Snow Leopard install. Am thinking that perhaps the Yosemite installer inserted that (taking space from one of the other partitions), then shifted the windows partitions out further on the disk.
Anyway, any help would be appreciated. Seems like having windows bootable at least makes this a bit less egregious than some of the other posts I've read.
Thanks,
royci

Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

I have four Macs at home and two printers. After installing Digital Camera RAW Compatibility Update 2.0 from software update on my Mac Pro and MacBook Pro, the Epson r2400 printer driver no longer works. I can barely get a print out of Aperture and/or Photoshop, however, Pages will output to the r2400 no problem. When I try to print with the other Mac Pro that has not been updated, I can print without issue. I can print from both machines to my kyocera mita printer within aperture and photoshop.
All of these computers are running 10.5.2. The only difference being the most recent Digital Camera RAW Compatibility Update 2.0 is installed on the two machines that no longer work with my Epson r2400.
I have uninstalled the print drivers and reinstalled. Changed the connection to the computers and tested everything that has worked in the past. I consider myself pretty good at troubleshooting, but this is beyond my grasp.
I need to print right away from all these computers, so does anyone know how to "roll back" an update? I am not running Time Machine, but that may change very, very soon. Please help...

I'm working off a 750 GB hard drive, not so simple to clone even via firewire. I guess I made a serious mistake by trusting the apple update process...I see they have a new update today. I may try that to see if fixes the problem before I buckle to the original system disk installation process. If the install is already burned, it couldn't hurt to throw some gasoline on it, right?

Wifi at my Iphone was not functioning after I upgrade ot 6.1.3

How I can resolve the problem?

As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere

Cannon MP830 can't use the scanner function after upgrading to Mavericks.

I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?

There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

XI datasources function modules does not exist after BW upgrade to 7.3

We have recently upgraded our dev BI system to 7.3
During our testing phase we found that we are unable to load data coming from XI system.
When we checked the functional modules of the XI(web services)
datasources we found that the function modules does not exist in the system.
Eg : For our GECARS datasource we have 2 funcitonal modules
1. /BIO/QI6AZXH_ZIFIGECARS
2. /BIO/QI6AZXH_ZIFIGECARS_RFC (delta function module)
we have activated resp datasource and found that code for
/BIO/QI6AZXH_ZIFIGECARS exist now but we are facing issues with RFC
funciton modules (/BIO/QI6AZXH_ZIFIGECARS_RFC )
To put it in simple terms we are facing issues with Dev BI since upgradeto 7.3 with respect to RFC and non-availability of function modules.
Kindly help us in resolving this.
Thanks,
Kiran

Hello Kiran,
Have you found the reason for the non existence of the FM in the system after the upgrade?
Have you found any alternative? I hope you would have created an OSS message, if so whats the response have you got?
Kindly let me know as I am experiencing similar issue where one of the FM (RSDRC_MULTIPROV_GET_MAPPING) does not exist in BI system after the upgrade.
Regards,
Vinoth V

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
Eyal

I tried this! Somebody suggested it in another thread. It did not work, sadly.

Keyboard & Mouse Completely Not Functioning After 10.5 Upgrade

I've had my MacBook since August 2006. I haven't had many problems with it, but after I upgraded to Leopard/10.5 and restarted the computer (immediately after installation), my keyboard and mouse have completely stopped working.
That includes when I've connected external keyboards and mice. I have no way of using my computer.
Any suggestions before I bring it into the Apple Store? Is this a known problem? I don't want to be without my computer for a month, so I'd like to try to fix it at home first...

I have unchecked "Use all F1 etc keys as standard function keys" in keyboard prefs and we are back to normal.
This has worked.

After upgrading to os maverick iPhoto wants to upgrade it says..Your photo library will not be readable by previous versions of iPhoto after the upgrade. What exactly will I lose?

after upgrading to os maverick iPhoto wants to upgrade it says..Your photo library will not be readable by previous versions of iPhoto after the upgrade. What exactly will I lose, what will not be readable?

In the current version of iPhoto, nothing.
In previous versions of iPhoto, the ability to access any part of it.
Back it up before doing this.
(97446)

E71 - loses functionality after fw upgrade

Similar Messages

Maybe you are looking for