E71: mail client closing

Hi,
I created a IMAP mail account on my brand new E71 and if I wanna check for new mails the email client close.
This is only with one email account. All other accounts works.
What can I do to solve this (cause it´s the important account).
If I open this mail account via POP3 everything is working fine.
Message Edited by krawutke on 20-Aug-2008 09:32 AM

can u please provide more info on the same

Similar Messages

Outlook (former Hotmail) Forum says I need to get a "Mail Client" that works with 10.4.11

Hello Apple Friends:
I have a PowerBook G4 still running Tiger 10.4.11.
Unfortunately, due to virus concerns and spam at work, I have had to use non-apple mail such as Hotmail for well over a decade now. Not a problem! Mac works fine. But the folks over in the "Microsoft" (delete that word after reading it) group felt their Hotmail was too old fashioned and jazzed it up and are calling it Outlook now.
And Hotmail/new Outlook no longer works like it did before on the Tiger OSX of course!
After over a month and reading dozens of Emails (about 20 which I sent myself) to various Forums and help groups, the latest "advice" is that I go searching for an "old style" "Mail client" whatever that is.... that will work with Tiger 10.4.11. And install and transfer it somehow, hopefully without losing or deleting 17 years of contacts and Email, transfer over to using it for my Outlook (I looked at some others who have the great modern Mountain Lion etc OSX systems and read their posts about this and they had significant problems using the new Outlook too.
Problem is, I deal with many very stubborn people who are just not going to spend the time and effort needed to "convert" my "hotmail" address into anything new to replace it, not even counting how many weeks of effort, missed emails messed up communications this will entail and last far into 2014 I'm sure.
The best hope is that someone knows of a "Legacy" site with older mail clients on it (or even older browsers than my Safari 4.1.3 in case someone thinks that is the problem (I also tried it with Firefox, but only can have up to 3.6.28 and TenFoxFour is not highly recommended as it creates unstable computers occassionally)
So I'm caught in the middle trying to upgrade older Mac and without the funds needed to purchase one that has Intel Chip in it for use with something higher than Leopard so I can use the Hotmail/Outlook again.
Sorry for long message, but I wanted to cover all the bases in case someone is searching the data base of the Forum in later months, and hopefully someone else here has has similiar total frustration with trying to continue using the "M--------" free Email product.
While I'm on the topic, I wondered if the .Mac was an Email client?   I had it once but long ago subscrption elapsed and got notice that it became "mobile me" or something like that....just covering all the bases since Apple has so many more choices.
Thanks for reading all of this complicated (you should only see the other Emails!) question. (sorry products and username are wrong for this message can't get the hang of editing them "before" I think of writing the message!).

Hi BDAqua:
Just catching up to your earlier suggestions so hope this is not taken as anything less than the excellent advice and fantastic support you have given me here..
I cannot use the current edition of Sea Monkey 2.17.1 as System Requirements are : 10.6 Minimum, and I have Tiger 10.4.11 max in "non-Intel" G4
Note also that reading details (I always do) I cannot just jump to that one if I could or wanted to as too old a Sea Monkey at 1.1.19. They say to upgrade to 2.0 first, then reset the "profile" page (does anyone remember my password or even what Email I used back in 2004??) before moving on to upgrade (use it at least once in new profile of course!)
So I copied them first here for anyone else's information:
System Requirements, Installation and Uninstallation
Before installing, make sure your computer meets the system requirements. SeaMonkey 2.17.1 will no longer offer to migrate your data from SeaMonkey 1.x or Mozilla 1.x at the first start after installation (bug 689437). In order to upgrade from such an old version, install the last SeaMonkey 2.0 release first, do the one-time profile upgrade, uninstall SeaMonkey 2.0 and then install your target release (e.g. this one).
You can find more details about installation, profile data and uninstallation in our install and uninstall document.
Here are the specifics of Minimum Requirements of Sea Monkey 2.17.1 version:
Mac
Operating Systems
Mac OS X 10.6 or higher
Minimum Hardware
Macintosh computer with an Intel processor
200 MB of free hard drive space
Older System Sea monkey 2.0 requirements are ::
Mac
Operating Systems
Mac OS X "Tiger" (10.4)
Mac OS X "Leopard" (10.5)
Mac OS X "Snow Leopard" (10.6)
Minimum Hardware
Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor
256 MB RAM
200 MB of free hard drive space
But..... Caution signs are EVERYWHERE not to download or use this anymore.....
(I know my 1.1.19 is really old but so old no one bothers with it anymore?? but newer ones may have huge security loophole for viruses etc....
Sea Monkey 2.0.14 Warns:
Released April 28, 2011
WARNING! The SeaMonkey version available for download from this page is outdated and suffers from known security vulnerabilities. This page is only available for historic reference.
We strongly advise you to download the current release instead.
So I'm sorry if I could not follow your instructions and get a better Sea Monkey Experience as well..... I'm just using existing one as another browser in addition to the newer ones provided as I use them for different purposes, i.e. Sea Monkey can be great for just interrupted "look ups" on google, etc of a quick definition and then closing it, so nothing complicated, no Java/Adobe Flash ads requirements, etc in and out that's all.
Then I can leave my major browsing and using Email Hotmail/Outllook which prompted this whole exploration of solutions for the two brand new browsers TenFourFox and OmniWeb..
Thanks again to everyone! I replied to everyone below in addition to this reply above to BDAqua....

Problem when send an email with mail client!

Hi!
My mail server have MTA front end and Message Store back end with version:
./imsimta version
Sun Java(tm) System Messaging Server 7u2-7.02 64bit (built Apr 16 2009)
libimta.so 7u2-7.02 64bit (built 02:28:03, Apr 16 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
SunOS SMSG 5.10 Generic_139556-08 i86pc i386 i86pcMy users and I are having problem following: Send an email very slow, mail client is connected to front end but mail is not delivered, after that, I stop and resend this email several times then it is can delivered. While the mail was not send, i can telnet to front end with port 25. My users and I are using Thunderbird and Microsoft Outlook. What is problem on my mail server ?
I see time on MTA front end and Message Store are not synchronized, maybe this could be the problem?
Thanks!

NguyenPhuc wrote:
Are you using any kind of MTA spam filter plugin?I removed plugin spam filter, now on MTA server don't have plugin spam or virus !Are you saying you did have a spam filter plugin enabled (if so which one(s)) and you have just disabled it?
Are you receiving an excessive number of emails?No, total of number messages in my mailbox is about 1000 emails.I meant is the MTA receiving a large number of emails -- i.e. do you see a lot of emails coming in (mail.log_current)?
Also try the following and see where the delay in accepting emails occurs:
telnet <mta> 25
mail from: [email protected]
rcpt to: [email protected]
data
Subject: test email
To: [email protected]
From: [email protected]
body
.e.g.
-bash-3.00# telnet server 25
Trying 10.15.10.33...
Connected to server.aus.sun.com.
Escape character is '^]'.
220 server.aus.sun.com -- Server ESMTP (Sun Java(tm) System Messaging Server 7u3-16.01 64bit (built Apr 6 2010))
mail from: [email protected]
250-2.5.0 No HELO/EHLO seen; continuing anyway, [10.15.10.33].
250 2.5.0 Address Ok.
rcpt to: [email protected]
250 2.1.5 [email protected] OK.
data
354 Enter mail, end with a single ".".
To: [email protected]
From: [email protected]
body
250 2.5.0 Ok, envelope id [email protected]
quit
221 2.3.0 Bye received. Goodbye.
Connection to server.aus.sun.com closed by foreign host.Regards,
Shane.

Yahoo! Mail Plus + IMAP + built-in e-mail client, ...

Hello,
I just got my new Nokia E71 and tried to set up the built-in e-mail client using Yahoo! Mail Plus (yes, I do pay for it and pop3 works on any device). The built-in e-mail setup program sets up some imap addresses for incoming and outgoing mail. I provided my Yahoo! Mail username with and without "@yahoo.com" and the correct password, but it always pops up the username/password dialog as the input was wrong.
Has anyone managed to use Yahoo! & imap on his/her Nokia phone?
Thanks,
parhuzamos
ps. I know email.nokia.com, but it allows my to sync max 10 folders and that is not enough for me.

I use Yahoo public. Same settings as yours. No problem updating mailbox nor sending with WLAN (wifi) or GPRS.
I did encounter your same problem once or twice when my phone was new and I was just setting it up. I just deleted the mailbox and started over. There aren't a lot of settings for email accounts you can tinker with. The only other setting I could think of is the email key setting. Mine's set to default since I have 3 accounts on my phone.
Hope that helps in some way.

Unable to acces Email (web, online, mail client) password ok

Since this morning I had been unable to acces my emails from my Icloud account.
From Apple mail client I get the error message: "The iCloud IMAP server “p99-imap.mail.me.com” rejected the password"
However I am able to log on Icloud from any browser (safari, firefox, chrome) and acces calendar, contacts, etc. However I get an error message when I want to access emails and get the "option" to send an error report to apple (thing that I did several times).
Changed my Apple Id password, just in case with no success.
Also I called support where they told me it could be a "server issue" and now the case shows "closed" when I check it.
Does any one had any idea what could be happening?
Rgs
Pablo

I called Applecare, and open case # 331263318 however since seems to be a "server issue" they cannot help and "closed the case". Aparently I have to wait... (till when is the question).

Win 8.1 2010 Outlook Error message: "Either there is no default mail client or the current mail client cannot fulfill..."

When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.

Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support

Either there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010

I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?

Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang

Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run ...

Lync 2013 generates repeated messages stating “Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.”. Events that
seem to generate messages is disconnecting and re-connecting to a network but it also happens randomly and the messages will stack up during a working day. Everything seem to work OK but it is an annoyance. The computer is upgraded (uninstalled first)
from Office 2013 ProPlus to Office 365 ProPlus. Outlook (Desktop) is default mail client. 64-bit Windows 8.1 Enterprise, 64-bit Office (both before upgrade and after).
(Links removed to remediations I've tried)
Made no difference what so ever and the messages continue. What's next?
I posted the above to the Office 2013 forum (unfortunately I'm not allowed yet to post a link to that posting) but due to the fact that the computer affected by this is a networked domain computer I've been redirected to this group instead. I
was asked some additional questions ing the other forum regarding the problem:
Are you able to send mails from other applications like Word or Excel?
NO
Is the PC connected to any Domain/Server? YES
Is this an issue with one PC only. NO - affects all computers that once had Office 2013 Pro Plus installed and now has Office 365 Pro Plus (Originally I posted this question in the Office 365 community but was directed to first the Office
2013 forum and now this forum)
Right click on any file and Click on Send to-> Mail Recipient and check if you are able to send mails using Outlook.
NO
Also check if the Lync add-in is enabled in Outlook.
Start Outlook
Click the File tab.
Go to Options.
Click Add-ins.
Check if the Lync add-in is enabled. YES
My last posting in the other forum contained the following additional information regarding our problem:
As far as we can see installing 32-bit Office 365 Pro Plus using click to run makes no difference.
We do not send any mails from Lync, Lync is however the process that generates the message most frequently (as Lync seem to react upon network events).
Other processes that have Outlook plugins may also be the parent of the message popup (third party applications).
Yes the Lync add-in is enabled. Lync functionality in/from Outlook seem unaffected.
It is not possible to send emails from other applications (explorer, word, excel etc.) ie. right clicking and send to generates the messages and
a follow up error message concerning lack of MAPI enabled e-mail.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Since iOS 8.1.2 upgrade problems with yahoo mail via apple mail client

Since the upgrade to iOS 8.1.2 on my iPad I'm having issues with my yahoo mail account when using the apple mail client. I can send emails but cannot receive them. When I use the yahoo mail app there is no problem Sending or receiving. I have deleted and reinstalled my yahoo email account from the apple mail client. I have checked the wifi by changing between wifi hotspots. I have also restarted the iPad as well as resetting. None of these actions have resolved the problem. would appreciate any assistance that can be provided.

Do you use two-step verification for your Yahoo! account? If yes, you need an app-specific password.
If no, make sure your password is already entered in the "Outgoing Mail Server" in the Settings app.

Sending email using system default mail client

I'm working on a project right now, and I have no desire to develop a new mailing system. What would be very convienient for me is to have a call, opening the systems default mail client. Preferrably with some of the fields, like "to" and "Subject" being specifed by me.
I'm not really aware of how the JavaMail system works, but it seems to me like a backend API, able to transmit the mail, but not much else.
Could anyone give some hints on how to open the system default mailer?

I found this example here. Seems pretty good - just what I was looking for too!
from https://jdic.dev.java.net/documentation/Examples.html
Case# 6: Launch the system default mailer and send the constructed message with UI or without UI.
import java.util.List;
import java.util.ArrayList;
import org.jdesktop.jdic.desktop.Desktop;
import org.jdesktop.jdic.desktop.DesktopException;
import org.jdesktop.jdic.desktop.Message;
public class MailTest {
    public static void main(String[] args) {
        Message msg = new Message();
        List toList = new ArrayList();
        toList.add("[email protected]");
        msg.setToList(toList);
        List ccList = new ArrayList();
        ccList.add("[email protected]");
        ccList.add("[email protected]");
        msg.setCcList(ccList);
        msg.setSubject("Hello");
        msg.setBody("Test");
        List attachList = new ArrayList();
        attachList.add("C:\\test\\test.txt");
        msg.setAttachmentList(attachList);
        try {
            // Send mail in UI mode.
            Desktop.mail(msg);
        } catch (DesktopException e) {
            e.printStackTrace();
}

Sending email using system default mail client on linux and Mac

Want to send e-mail using defalut mail client of Linux, Mac OSX, others.

Your question may be about mail, and your question may be about Java,
but the JavaMail library can't do what you're asking.
I know of no platform-independent way to do what you're asking.
You can write lots of platform-dependent code - to do it with Outlook
on Windows, to do it with AppleMail on MacOS, to do it with Thunderbird
on Linux - but I know of no way to do it with whatever mail client the
user has configured on any system.
Sorry.

Can't setup POP3 E-mail on mail client on my MacBook Pro

So this problem is getting really out of hand and I'm not sure what options I have left. So here are the details:
I'm trying to set up my work e-mail (the site host is Network Solutions) with Mail. There seem to be no problems with the online client. I can sign on without any troubles so password and username are correct. I'm using Mail 4.4. I first enter my name, e-mail, and password with no problems. Then for the incoming mail server I do the same, choosing POP, and I get the following message:
"The POP server "mail.companysite.com" (with the proper domain inserted) is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable. If you continue, you might not be able to receive messages."
i get this regardless if i put my username as just username or [email protected] and my network connection is fine as my other e-mail accounts (2 gmails set up as IMAP) work just fine. I've tried using different ports other than the default 110. Still the same problem.
An interesting little quirk is that at one point it actually did work, then suddenly without any changes to anything that I could tell, it stopped. When it was working, I had it set up on my iPod touch and even when it stopped on my computer it kept working on my iPod. But that also didn't last as now I can no longer connect or even set it up.
But wait! There's more. I've tried all the different debugging methods I can come up with, including trying to set it up on different e-mail clients, Entourage and Thunderbird, with the same result. Then I eventually tried it on another computer, on a PC running Windows XP, and wouldn't you know it, it set up without a hitch! so this means that my account is properly set up for this. Furthermore, I know it is possible to use an e-mail client on a mac with this domain as one of my coworkers has set it up on Entourage and Mail as well as his iPhone. I have no firewall settings currently on so nothing should be blocking and i've tried it using several different internet connections in different countries (seemingly then it's not a router or modem issue)
Anyone have any ideas? Any and all help would be greatly appreciated! Let me know if there's any more info you would need me to provide.

Create a New User Account, and as that New User try to set up this one account -- as it is POP, set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test, and is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account.
Also in System Preferences/Networks click on Advanced, then Proxies and make sure no proxy selections have been checked.
Ernie
Message was edited by: Ernie Stamper

Office 2013 Pro - Error Message - I cannot set Office 2013 as the default mail client

I have a number of PCs on a single domain in the same office all running Windows 7 Pro. Some at 64 bit and some are 32 bit depending on their age.
My issue is that on upgrading from Officer 2010 Pro to Office 2013 Pro, the only application I have a problem with is Outlook 2013, and only on the 64 bit machines.   The upgrade on 32 bit machine goes perfectly.   On both I install the
32 bit version of Office 2013 as per the MS notes.
When the 64 bit machines reboot and the user logs on I get the message, sometimes twice:
Either there is no default mail client or the current mail client cannot fulfil the message request. Please run Microsoft Office Outlook and set it as the default mail client.
OK, so this should be straight forward:
I set outlook at the default mail client and associate all file with it from Outlook\File\Option. Nope. That does not work.
I go through default programs and set the default mail client as Office 2013 and associate all file with it from Outlook.   Nope. That does not work.
I check the registry and it shows that the 64 bit or 32 bit reversion is the default mail client. So that does not help.
I install the 64 bit version instead of the 32 bit version. Nope. That does not work.
I clean the registry and temp file. Nope. That does not work.
I set a new mail profile for the user. Nope. That does not work.
Odd that it only upgrades smoothly on the 32 bit machines.
Has anyone got any ideas?   All the suggested fixes on this forum do not fix this issue.

Hello.
Same problem, nothing Works!!!
Help please, really frustrated and angry.
Added written above I tried:
Uninstalled with the Microsoft fix uninstall
and reinstall. This does not work.
Contact the phone technical support. This
does not work.
Addin,s does not work. Adobe, iCloud Addin .... does not work.
'Send email to'   menu does not work.
No application communicates with
Outlook, no Microsoft or third apps.
I can only send and receive emails
from within Outlook.
This program is lousy, any
possibility that my money back.
Thanks

[solved] XFCE default mail client

In preferred applications in the XFCE settings manager the two simple questions appeared: default web browser and default mail client. I set these to firefox and thunderbird respectively, and XFCE indeed recognized that I meant Bon Echo and Mail/News. For the strangest reason, every hyperlink to an HTTP or FTP protocol will indeed open up in firefox and go where it should, but mailto links will do nothing. In firefox I searched about:config for all options containing the world "mail" and set them to enable as many things as possible. Gmail is smart enough to open mailto links because it overrides the default mail client behaviour and just opens up a Gmail compose window, which I'm sure many of you know. This is another one of those minor problems that I'm having alot of these days, so any help would be appreciated.
Last edited by ConnorBehan (2007-09-14 01:17:42)

maybe this will help:
http://bbs.archlinux.org/viewtopic.php?id=26461

E71: mail client closing

Similar Messages

Maybe you are looking for