E71--Map LANDMARKS or FAVOURITES file

MODEL: E71
which file keeps the list of LANDMARKS or FAVOURITES
of the maps?
I hv lost all those files after version upgrade.
It was not in the BOOKMARKS of nbu file.
Message Edited by 2009tester on 20-Sep-2009 09:12 AM

There is nobody from Nokia here, Here, we are all owners of various Nokia phones trying to help each other.
To ask Nokia, please click "Contact us" at the top of this page. There you will find people from Nokia.
mgoksoy

Similar Messages

Can XI Message be mapped to a flat file attachment in Mail adapter

Hi guys,
I have a requirement, where I have ECC system seding a XI message to XI.
Now XI has to convert this to a flat file may be tab delimited and send this as an attachment in email using receiver mail adapter.
I want to avoid BPM and make it simple.
Appreciate any help on this topic.
Regards
Sujan

Hi,
Here are some mapping examples.
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
/people/alessandro.guarneri/blog/2007/03/25/xi-java-mapping-helper-dom
/people/carlosivan.prietorubio/blog/2007/12/21/implementing-a-java-mapping-in-sap-pi
/people/venkataramanan.parameswaran/blog/2006/12/12/java-mapping-to-handle-flat-files-in-sap-xi
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/michal.krawczyk2/blog/2005/02/25/simple-java-code-in-graphical-mapping--xi
Vishal

XSL Interface Mapping - Recover name of file

Good evening,
I am using XSL interface mapping to convert a file to idoc and I need to recover the name of the file to insert it in the idoc.
I have been looking for in XSL manuals for an answer and I haven't find it.
How can I recover the name of the file that I'm trying to map to idoc?
Best Regards,
Nuria

hi,
right after you create an IDOC in your XSLT mapping
create another mapping - message mapping (this time IDOC to IDOC)
and put it into your interface determination
put the code from my blog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
and you will have the name
Regards,
michal

I cannot see toolbar with favourites, file etc so i cannot join any pages to my favourites. Where it's gone...?

I cannot see toolbar with favourites, file etc so i cannot join any pages to my favourites. Where it's gone...?

Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

Favourite file manager and why

What's everyone's favourite file manager, and why? I'm using XFE in Openbox atm, and am impressed, but wonder if there's somthing else out there that's easier to customize/faster/has a better interface.
Your thoughts?

Konqueror is my favourite. It just has lots of nice little extras. Somebody earlier mentioned the kioslaves, like fish:// and the like, so I can just do fish://HomeServer, and as if by magic I am seamlessly yet securely browsing files on my home network server at my non-university home all the way over in Berkshire, which often comes in handy
The command line has its uses since you can be so specific and yet so general at the same time, allowing you to do some stuff that would be a bit of a pain in Konqueror or whatever, likely involving a lot of Ctrl-clicking and stuff, but then again it doesn't have cool things like file previews, drag and drop, etc. File previews are really good because sometimes on a bad day you might just make some really bad file naming decisions, and having to open 10 .pdf files to find the one you want is no fun at all

Decode statement in a mapping involve Source Text File & Table.

Hi All,
Oracle 9i Warehouse Builder Client: 9.2.0.4.0
Oracle 9i Warehouse Builder Repository: 9.2.0.2.0
Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
Does OWB allow to use Decode statement in a mapping involves Source Text File and Oracle Table.
My understanding is it's not possible, since OWB makes use of Sqlloader. For this work arround could be make use of External Table instead of Text Flat File.
However I came across an old posting (June-2003) which says that this feature is available OWB 9.2.
Following is the url:
IF THEN LOGIC from Flat File to Table
Can someone please confirm this?
Thanks in Advance.
Regards,
Vidyanand

Hi all,
If you want to validate correctly this mapping you must to :
1. Right click on the mapping, then Configure
2. Right click on Sql Loader Data Files, then Create
3. Verify that the location name is correct and complete the Data File Name
4. OK
The validation is now OK.
I hope it will be help you
Best Regards
Samy

TIPS(20) : MAKE A MAP OF YOUR ORACLE FILES

제품 : SQL*PLUS
작성날짜 : 1996-11-12
TIPS(20) : Make a Map of Your Oracle Files
==========================================
The script below generates a report on all the Oracle files
(database, redo log, and control) in an Oracle UNIX system.
It's like a map of your Oracle files. Moreover, it also makes available other
information (size and physical I/Os, if applicable) related to the files.
THE SCRIPT
rem
rem File: filemap.sql
rem
rem This script provides information on the location/path, file name,
rem size and physical I/Os (if applicable) of all the Oracle files
rem (database, control and redo log) in an Oracle/UNIX platform.
rem
rem
set pages 999
col path format a20 heading 'Path'
col fname format a15 heading 'File Name'
col fsize format 999b heading 'M bytes'
col pr format 999999b heading 'Phy. Reads'
col pw format 999999b heading 'Phy. Writes'
break on path skip 1
spool zzfilemap.rep
select substr(name,1,instr(name, '/', -1)-1 ) path,
substr(name,instr(name, '/', -1)+1 ) fname,
bytes/1048576 fsize,
phyrds pr,
phywrts pw
from v$datafile df, v$filestat fs
where df.file# = fs.file#
UNION
select substr(name,1,instr(name, '/', -1)-1 ) path,
substr(name,instr(name, '/', -1)+1 ) fname,
0 fsize,
0 pr,
0 pw
from v$controlfile
UNION
select substr(lgf.member,1,instr(lgf.member,'/', -1)-1) path,
substr(lgf.member,instr(lgf.member, '/', -1)+1 ) fname,
lg.bytes/1048576 fsize,
0 pr,
0 pw
from v$logfile lgf, v$log lg
where lgf.group# = lg.group#
order by 1,2
spool off
exit
--------------------------Sample Output----------------------------------
Path File Name M bytes Phy. Reads Phy. Writes
/u01/oradata/PDB7 control3.ctl
rdmxf1.dbf 50 694 2781
redo1b.log 10
redo2b.log 10
redo3b.log 10
tempf1.dbf 30
/u02/oradata/PDB7 control1.ctl
rbsf1.dbf 40 6 2813
redo1a.log 10
redo2a.log 10
redo3a.log 10
/u03/oradata/PDB7 control2.ctl
genf1.dbf 50 1551 396
rdmf1.dbf 100 4403 2335
systemf1.dbf 50 5905 1116
toolsf1.dbf 15 2979
16 rows selected.

Thanks for your reply, but I'm not sure if you understood my point correctly.
I didn't exactly mean to use my iPod as a USB memory stick.
What I meant was that if I copied the contents of my iPod to a DVD and if something weird happened to my music player and I would have to format it...
Could I then just copy the files (I had burned on the DVD) back to my iPod and it would be the same as before? My music would be saved?

Mapping for IDoc to File

Hi,
I am doing mapping for IDoc to file scenario.
Idoc is INVOIC02.
Source field is KRATE from segment E1EDP05
Target field is Rate.
Mapping rule is as follows.
zero when Condiditon type (E1EDP05-KSCHL ) = YCSE ( enter total 15 digits without any decimal in it. The last 2 digits will be treated as digits after decimal )
Can someone explain the mapping?
I have to map KRATE and Rate but where does KSCHL comes into this?
Please explain

TAKE HELP FROM THESE LINKS : These links can be helpful for you.
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/db0e83e8e74202a5bff527055ab7e5/content.htm
Regards,
Sandeep Kaushik

Creating Map IDs using HTM File Name

Is it possible to create Map IDs using the File name of the HTM, instead of its Topic Title?

While Generating Map IDs, we get an ID along with a Map # for each HTM in the CSH.
For Example, I have a HTM in my CSH with the following Details:
Topic Title - Access Masks
File Name - admpr00001.htm
Now when I create a Map ID for this page. I can customise the Map ID by setting any/all of the three options: - 'Prefix Map IDs with', 'Make Uppercase' and 'Start Numbering with'. But the Map ID is generated only based on the Topic Title.
Like - ebACCESS_MASKS 1000 where, eb is the set prefix.
Is it possible for me to create a MAP ID using the File Name. In this case, as ebadmpr00001 1000?
Hope I am clear .

Map property in property file

Hi all,
can we have a map property in properties file, i.e key value pair , and the value being a List or map or Array for example,
States.properties
state=\
AL=Alabama,\
MA=Massachusetts,\
CA=California,\
xyz=List or Map or array
can we have a list or map or array as value for XYZ????

Nucleus doesn't have any code that understands complex collection element structures. In other words, there's no automatic parsing of maps within maps or arrays within arrays. If you want that kind of structure, you have to write your own parsing code for the children. You have to be careful with your choice of delimiters so that something in a child isn't interpreted as a parent delimiter. The most complex example is a map of maps. You'd have a hard time if you tried to use = to separate the keys and values in the child maps and tried to use comma to separate child map elements.
Another option for the map of maps case is a ServiceMap, which is a map of Nucleus components. Instead of configuring child maps in the parent's properties file, you'd configure each child in its own properties file. If you go to the trouble of splitting out the child configurations into separate components, you might as well take the next step and create a pojo with named properties instead of stuffing all the child information into a map. Accessing pojo properties by name usually makes for more readable application code.

N96 - maps landmarks

Does anyone know how to transfer N95 Map Landmarks (or folder) across to a new N96?

Just send them to your email address

Unable to map into target text file (VDL-2357)

Hi,
I mapped a target text file (CSV), where I want to write data in. Do I have to say, that it is target and not source? (Where?)
The mapping says at VALIDATE:
VDL-2357: Taget data file name is not specified for "TFILE"
Specify target data file name in the mapping configuration under flat file operator.
There are bond name, physical name and location set in the property editor....!
Regards
Alexander
PS: Is there a list of error messages and explanations somewhere?

Hi Alexander
The blog below has an example of where in the map config editor this info is defined;
http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$154
There is another one here worth looking for some info;
http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$113
Cheers
David

Can you convert a favourites file from windows to a bookmark file for mac?

can you convert a favourites file from windows to a bookmark file for mac?

I can't answer for Internet Explorer but you should be able to export Bookmarks from FireFox. If you can't export from IE you may be able to import from EI to FireFox first.
In FireFox, menu BookMarks>Organize Bookmarks, then in the pane which opens, menu File>Export (that's how it works on Linux so Windows should be broadly similar). The result should be an html file.
You may be able to import this into Safari on your Mac; certainly you should be able to import it into FireFox and perhaps from there to Safari if necessary.

Landmarks vs Favourites vs Categories vs Icons

I do not understand the relationship of these 4 topics:
Favourites are under Favourites within OVI Maps, and the Landmarks are under Menu-Applications-Location, Landmarks.
I have some Favourites in OVI Maps, they can be synchronized without problem.
After synch i do see the Favourites in OVI Map on the phone, and also as landmark in the application-area. But the categories did not synch, all landmarks are flat under one level, i do have to re-create all categories again and shift each single landmark back to the correct category. Is this a bug, or does that work as designed?
Second Topic: When i select a category and assign a special icon, then this icon is not shown in the map, it is still the original blue square with white star in.
Now i do have 20 icons, lets say 5 are named POI_01 and 15 are named POI_02. If i mark all Landmarks in that category and assign a different icon, then all 5 POI_01 are shown with the new icon, the other 15 not. So i go into the category and select one Landmark with the name POI_02, and assign a new icon. Guess what.... now also the other 15 Landmarks have changed the icon.
Seems like
- assigning new icon to category does not work
- assigning new icon means to link the icon the the name.... same name same icon.
Again...is this a bug, or working as designed?

Hi Ricardo,
It is my understanding that the Express editions do not allow plugins such as the Oracle Developer Tools for VS, which is what gives you the functionality you're looking for. Without ODT, you're limited to the built in DataSource/ServerExplorer functionality provided by Microsoft, and using System.Data.OracleClient.
ODP.NET is the driver that you can use from .NET code to connect to the database, and that can be used from Any version of VS, or even using the command line compiler. What you're referring to is the functionality of the VS tools though.
Note also that ODT for VS issues/questions would be best posted in that forum:
Oracle Developer Tools for Visual Studio
Hope it helps, corrections/comments welcome.
Greg

Why can't I print a map from a PDF file?

I am going to the website http://www.atac.roma.it/ which is the public transit system for Rome, Italy. If you scroll down and click on the green button for Linee e Mappe and then scroll down on the next page and click on the PDF file for the Line e Elettriche you will get the map for the electric buses that runs through Rome. You will notice at the top of that page on my computer it says "doc.pdf(secured) Adobe Reader". You will also notice that there is no option to print the map. This did not used to be the case as I have printed maps off this site before.
I do not have any add-on for Adobe reader. I am able to print PDF files. I do it all the time. I just did it now, but when I have those pages open I do have the option to print.
I don't have any problem viewing the page, either the website or the PDF file of the map. I just can not print it. Because it says "Secured" would the mean that ATAC.Roma does not want everyone printing their map?
Thank you,
TomS

That is because the document's security settings disallows printing (as well as everything else).

E71--Map LANDMARKS or FAVOURITES file

Similar Messages

Maybe you are looking for