E71 PC Internet Access DNS Problem
Hi all,
Got a bit of a problem which I hope someone knows the answer to.
I'm currently triailing tethering on an E71 for our corporate network. I've got the phone connected up and installed Nokia PC Internet Access on my machine; all good.
The problem I'm having is that we use a private APN at the mobile carrier to connect back to our network, and this does not advertise automatic DNS settings to clients. I can get connected to the APN no problem at all but without DNS servers on the connection, it's fairly useless.
Now, I can see that the PCIA application uses Dial-Up Networking behind the scenes to actually connect up, and I have tried to specify manual DNS servers on that connection, but every time I reconnect using PCIA, it resets everything back to automatic, which doesn't work.
Anyone got any ideas on forcing manual DNS servers on a connection when using PC Internet Access?
Thanks all!
Nobody? This is the way how Nokia does NOT care us. Nokia is now dead
Similar Messages
-
WRT 120 Internet Access Control Problem for itouch
I've just set up my router. Cannot seem to control access to the internet for my son's itouch. The router recognizes it on the map as a wireless device part of the network, but it will not show up in the menu that allows for internet access control. My lap top shows up, but no itouch. I'm running Windows XP home premium edition - not sure if this makes a difference.
Open the linksys setup page...Under the Wireless tab,Change the Channel Width to 20MHz only,Channel to 11 and click on save settings...Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
On the I-Touch..Go to Settings>>>General>>>Reset>>>Now select Reset Network Settings.This will now reboot and restore you network connections. -
New MBP - wireless/internet access networking problem - a summary!
Greetings!
New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
Also same thing with PING errors. Quite frequent when pinging another device on my network.
2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
- Roger T
Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
link: »www.hardmac.com/news/2007-07-27/#7039
- The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
to forum · permalink
I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
I'll try your DNS server choice on the Mac settings first. Will report accordingly.
Thanks for everything!
- Roger T -
Nokia Lumia 720 internet sharing DNS problem
Hi,
I am using Nokia Lumia 720 (OS version 8.0.10517.150) for internet sharing and have had DNS issues lately. When connecting to hotspot with my laptop I get DNS server is not responding error. Phone has data connection and I can browse the internet through phone but cant use it to share the data connection. When I connect my laptop with other wifis it works fine also so the fault must be in Lumias hotspot generation.
Had the same problem few weeks ago but then restarting the device and changing hotspot settings helped but it does not do the job right now.
Any ideas?Hi kalverk,
Welcome to the forum!
Have you tried using your micro-SIM card with other internet sharing capable phones to verify it the issue is network or device related? Aside from your laptop, have you tried sharing your Lumia 720's internet connection with other phones?
Here are some tips that might help you resolve the issue:
1. If enabled, switch Battery saver mode off: Tap Settings > battery saver > Off. You can also just connect the phone to the charger.
2. Check the signal strength on the phone screen. To increase the signal strength, move around or move towards a window if you are inside a building.
3. Keep your phone in the idle mode. Incoming or outgoing call will interrupt the data transfer until the call ends.
4. Check the cellular data indicator (E, 2G, 3G, H+, 4G) at the left side of the phone's screen. Change the mobile network's highest connection speed from 3G/4G to 2G and back again to make sure that your phone is connecting to the network correctly. Go to Settings > mobile network (or mobile + SIM or cellular or cellular + SIM).
5. Make sure that the internet sharing security type (if not selectable, WPA2 is used) and password settings match between the connecting device and your phone (Settings > internet sharing).
6. Make sure that the operator mobile data plan subscription allows Wi-Fi tethering and your network operator has enabled internet sharing on the phone.
7. If possible, try to create a connection with some other device or force the connecting device Wi-Fi adapter to use 802.11g standard - disable 802.11n mode. On a Windows PC, go to Control Panel > Network and Internet >Network Connections, and right click your active Wireless Network Connection and open Properties >Configure > Advanced, then select 802.11n and set value to Disabled. Once ready, press OK.
8. Connect again, as internet sharing switches off after 5 minutes of inactivity.
Let us know how it will go. -
I have NO status light on my Airport/Time Machine, I unplugged the internet connection from back of Airport and plugged directly into my MAC and am able to get to the internet just fine.
The Airport is almost 6 years old
Is my Airport dead and just need to get a new one??Is my Airport dead and just need to get a new one??
Unfortunately, yes. On the upside, your Time Capsule lasted about twice as long as normal. -
Ok so I just purchased the E4200 and upgraded to .03 (newest firmware) and noticed everytime the router reboots my computer (wired client) would say limited or no internet access for some time after the router has stopped blinking. When I try to open Chrome and go to google.com I get a DNS error. If I then try to go to another website like say bing.com it works and then google.com works. Mind this whole time Nslookup works and when I can't seem to access google.com from my wired connection my iPod can connect to it wirelessly. Normal or is everyone else experiancing that? I also suppose if I wait some time while it says limited or no connectivity it will work and switch to internet access.
DNS is one of the most essential services on any Windows network. Active Directory can’t function without DNS, and it’s is also used by any number of other network functions. So it’s critical to troubleshoot DNS problems as fast as possible. So you can try to reduce the LAN card speed. Here is the step:
START--> right-click My Network Places and click Properties
right-click on the device and click properties
Click on the CONFIGURE button
Select the ADVANCED tab and the settings you can alter are listed on the left.
If the issue still persist then here is the link which may help you in resolving the concern: http://www.techrepublic.com/blog/10things/10-tips-for-troubleshooting-dns-problems/1964 -
Internet access problems and viewing video on internet
I have very limited interet access most of the time. I get a message: "You are not currently in an area that can handle data communication. ..." I have no problem with email and other features of the phone during this time. The signal at the top of my phone says "GSM". When I am able access the internet, it give me a different signal (can't remember what that is, however). Even then, I cannot view most video clips, such as YouTube clips. They will not load all the way. It states, "Error has occurred in attempting to play media." Help!
I have unlimited internet access, so that's not the problem. Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage. I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home. I've also been able to view a video clip, not successfully all the way through, however. During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot. This has also happened when the phone has not even been being used. Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did. Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips?
-
MY PROBLEM
I am having a DNS problem with my laptop. It connects normally to th e wifi internet but when i try to surf the net it says "DNS Look up failed"
This problem only occurs when with the internet at my house. whenever i connect elsewhere my computer works normally. My ipod, iphone, tablet and other friends computers work normally when they are connected to my internet. i use dmy neigbours nework a couple of times from my house and it wrks normally.
Also when i turn my laptop on or off i can browse for a few minutes or seconds before it fails again. My skype works like there is no problem
WHAT I HAVE TRIED TO RESOLVE IT
I have tried changing the DNS, i used open DNS and google free DNS and it still didnt make a difference.
I have rebooted router many times, nothing
I have changed my home router, nothing
I backed up my computer, resored everything it to factory setting and put everything back on; still nothing
Run a diagnostics at 'Best buy' and they say nothing is wrong; but i know there is something wrong with the DNS
I have tried different "sudo" type of codes on my comupter from stuff i got online and nothign has proved fruitful yet.
i tried using safari, Google chrome and firefox, all not loading
WHAT DO I DO TO FIX THIS?You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.
-
hello everyone.
i was surfing browsing and downloading on my iphone 4 on my home wifi and other places without any problem but today i found out that even though i'm connected to my wifi i got no internet access. i also got this new problem, my led flash is on. if i tilt the device the flas dims a bit. i tried switching off the device but still the flash is on. i tried using at other wifi network same problem. i tried forget this network, switching off and turning on the device i also tried reseting the network and also hard reseting the device. but still same problem. what can i do about this? and if i send it to apple what are my options? i got warrant coverage so will they be able to repair it ? if they are not able to repair then will they give me new iphone 4 or refurbished iphone 4 for replacement?Apple does not repair devices. If they are covered under warranty, the device is replaced. You will not get a new phone, you will get a service unit which is as good as if not better than new.
If all the basic troubleshooting from the User's Guide has been done and the device does not get Internet access via Wi-Fi from multiple locations, the only thing left is to take it to Apple. -
HT201320 I cannot send email. I have internet access. What could be the problem?
I cannot send email. I have internet access. What could be the problem?
Hello, ootytooty.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues with mail.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Cheers,
Jason H. -
Lumia 920 service problems/ no internet access. Also problem with receiving calls?
As of yesterday I have been having a wierd problem with my Windows phone, and exploring through the web, I've seen a couple of other people with this problem as well, with no one really coming up with any other solution but to do a hard reset, which I abosuletly want to avoid. So my problem is that I don't seem to have any internet access, regardless if I am connected to 4G or through wifi. This is real wierd because it just started happening all of a sudden. I didn't do any update, didn't download anything new, nothing like that.I know for a fact that I'm simpily not just mistyping addresses or have airplane mode on, I'm stumpted as to why this is happening. To add another layer of confusion, I don't seem to receive all calls I get. For instace: yesterday, one of my friends called me, I received his call right? Well later that day, my Father apparently called me, but I never received any nottification or even a voicemail that he ever did. What the heck is going on here and what can I do to resolve this??
Hello @ThomasWolf
I’m sorry to hear you’ve been experiencing issues with your phone.
When you say you’re unable to access the internet, is it just via your Web browser? Or is it apps that require data such as Facebook, YouTube, etc.?
Have you tried via more than one Wi-Fi network as well?
Try to open up att.com/ttr via your mobile web browser; do you see a confirmation page?
If you’re continuing to have issues, then please contact us.
Thank you,
Charise -
Networking problem (internet access)
My host has no internet access, but the VMware guests do. Because the host has no access, the NAT over host doesn't work when I want to access the internet.
Therefore I added a third bridged network card. With this card internet works fine, but the Oracle Cluster doesn't work any more. It seems to get confused by the added card.
What must I do to make Oracle work again? - Or is there another way to access the internet from the guest if I don't want to let the host access it?My host has no internet access, but the VMware guests do. Because the host has no access, the NAT over host doesn't work when I want to access the internet.
Therefore I added a third bridged network card. With this card internet works fine, but the Oracle Cluster doesn't work any more. It seems to get confused by the added card.
What must I do to make Oracle work again? - Or is there another way to access the internet from the guest if I don't want to let the host access it? -
Internet Access from Inside to Outside ASA 5510 ver 9.1
Hi everyone, I need help setting up an ASA 5510 to allow all traffic going from the inside to outside so I can get internet access through it. I have worked on this for days and I have finally got traffic moving between my router and my ASA, but that is it. Everything is blocked because of NAT rules I assume.
I get errors like this when I try Packet Tracer:
(nat-xlate-failed) NAT failed
(acl-drop) Flow is denied by configured rule
Version Information:
Cisco Adaptive Security Appliance Software Version 9.1(4)
Device Manager Version 7.1(5)
Compiled on Thu 05-Dec-13 19:37 by builders
System image file is "disk0:/asa914-k8.bin"
Here is my ASA config, all I want for this exercise is to pass traffic from the inside network to the outside to allow internet access so I can access the internet and then look for specific acl's or nat for specific services:
Thank You!
Config:
ASA5510# sh running-config
: Saved
ASA Version 9.1(4)
hostname ASA5510
domain-name
inside.int
enable password <redacted> encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd <redacted> encrypted
names
dns-guard
interface Ethernet0/0
description LAN Interface
nameif Inside
security-level 100
ip address 10.10.1.1 255.255.255.252
interface Ethernet0/1
description WAN Interface
nameif Outside
security-level 0
ip address 199.199.199.123 255.255.255.240
boot system disk0:/asa914-k8.bin
ftp mode passive
dns domain-lookup Outside
dns server-group DefaultDNS
name-server 199.199.199.4
domain-name
inside.int
object network inside-net
subnet 10.0.0.0 255.255.255.0
description Inside Network Object
access-list USERS standard permit 10.10.1.0 255.255.255.0
access-list OUTSIDE-IN extended permit ip any any
access-list INSIDE-IN extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu Inside 1500
mtu Outside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-715.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (Inside,Outside) source dynamic any interface
object network inside-net
nat (Inside,Outside) dynamic interface
access-group INSIDE-IN in interface Inside
access-group OUTSIDE-IN in interface Outside
router rip
network 10.0.0.0
network 199.199.199.0
version 2
no auto-summary
route Outside 0.0.0.0 0.0.0.0 199.199.199.113 1
route Inside 172.16.10.0 255.255.255.0 10.10.1.2 1
route Inside 172.16.20.0 255.255.255.0 10.10.1.2 1
route Inside 192.168.1.0 255.255.255.0 10.10.1.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 Inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Inside
ssh timeout 60
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username <redacted> password <redacted> encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
password encryption aes
Cryptochecksum:
<redacted>
: end
SH NAT:
ASA5510# sh nat
Manual NAT Policies (Section 1)
1 (Inside) to (Outside) source dynamic any interface
translate_hits = 0, untranslate_hits = 0
Auto NAT Policies (Section 2)
1 (Inside) to (Outside) source dynamic inside-net interface
translate_hits = 0, untranslate_hits = 0
SH RUN NAT:
ASA5510# sh run nat
nat (Inside,Outside) source dynamic any interface
object network inside-net
nat (Inside,Outside) dynamic interface
SH RUN OBJECT:
ASA5510(config)# sh run object
object network inside-net
subnet 10.0.0.0 255.255.255.0
description Inside Network Object
Hi all,Hello everyone, I need some help before my head explodes. IddddddddHello Mitchell,
First of all how are you testing this:
interface Ethernet0/0
description LAN Interface
nameif Inside
security-level 100
ip address 10.10.1.1 255.255.255.252
Take in consideration that the netmask is /30
The Twice NAT is good, ACLs are good.
do the following and provide us the result
packet-tracer input inside tcp 10.10.1.2 1025 4.2.2.2 80
packet-tracer input inside tcp 192.168.1.100 1025 4.2.2.2 80
And provide us the result!
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
Note: Check my website, there is a video about this that might help you.
http://laguiadelnetworking.com -
No internet access for vlan devices
Hey folks,
I'm new to cisco and have only recently started study for my ccna. In preperation for this i've gotten my hands on a cisco emi 3550-48 port switch so i can play and test some scenario's.
Now, I've setup a couple of vlans (200,201 and 202) and i've assigned them to fa0/3, 0/5 a0/7 respectively. i suppose it's irrelevant which ports are assign, they are just the ports i've assigned while typing this.
I know the cisco forums are full of people saying the intervlan routing isnt working and it just turns out to be the static route on the router in the end but i have set all that up and i can not get internet access on my vlan networks. The wierd thing is the switch itself can ping the internet no problem.
Here is my setup :
I've assigned ip addresses as follows :
vlan 200 - 10.10.200.254/24
vlan 201 - 10.10.201.254/24
vlan 202 - 10.10.202.254/24
I then enabled intervlan routing by issueing "IP ROUTING"
At this point I configured the VDSL modem/router (zyxel F1000) on IP Address 192.168.1.2/30 and I configured interface fa0/1 with the following commands :
interface fa0/1
no switchport
ip address 192.168.1.1 255.255.255.252
no shutdown
I then set the default route using :
ip route 0.0.0.0 0.0.0.0 192.168.1.2
Finally I configured three static route's on my Zyxel F1000 modem/router to send traffic back to my three vlans using the gateway 192.168.1.1
As i said above, If I plug into fa 0/3 (vlan 200) and lets say I give myself an ip address of 10.10.200.20, 255.255.255.0 and gateway 10.10.200.254. I can ping the othe vlns and devices on the other vlans no problem but bot for love nor money can i get onto the internet. For clarifications sake my dns is set to 8.8.8.8
Stranger still is the fact that the switch can ping hostnames and ips on the internet no problem. Has anyone got any ideas what could possibly be wrong?? I'm completely stumped.
Regards,
Thomas QuigleyHey guys,
Thanks for the speedy replies. I have been trying this for about 2 weeks now and last night after posting this message to the cisco forums I got my hands on an old Sonicwall router. I decided to test the connection using this as I suspected that Zyxel router is buggy.
I setup a PPPoE connection on the sonicwall and set that up as my default route matching exactly the ip settings listed above and it worked immediately.
I knew the setup I had ran above was right it was just tormenting me that it wouldn't work. Turns out its the piece of crap Zyxek VDSL modem.
Thanks for taking the time to read my post and offer advice.
Cheers,
TQ -
No internet access via ethernet port
Hi, have been using my emac via ethernet cable to router, for many months with NO problem accessing internet and others cabled to same router also having no problem and I have used my Pwr Mac wtih no problem and have never had to make any specific settings to either to access the net via the router which gets its wifi signal from elsewhere. With system preferences > network > ethernet open I can see the the router is being recognized cause it appears or dissappears as soon as I plug or unlug the ethernet cable. I open "Activity Monitor" and occasionally, very briefly, there will be data incoming( green spikes ) or outgoing( red spikes ). HD verified OK, ran disk permnissions and scripts. Have not yet run Apple or other( Micro-mat ) hardware testing programs tho I will later. Does anyone know if there is a PLIST file that can get corrupted that would affect ethernet port functioning properly? My guess it is hardware but since I can see the router is recognized makes me wonder about corrupt file ergo a system error or possibly inloaded some file that caused conflict. I also booted from my external drive and tried accessing from the cloned OS system and still did not work. The cloned system is the original has never been updated, nor has any of the applications in clone, so, if it was "system" problem the clone should have worked. However, I had cloned user ergo newest documents, library etc, so that would be the only possible source of conflicts when booted from clone system....Thx Ran
Ping test should be interesting.
Start by pinging router address. Should be able to ping building router if you can figure out it's address.
Could you go wireless to building net? You might buy a usb dongle.
USB dongle
Introducting RokIt, a new wireless USB adapter that is compatible with Mac OS 10.3, 10.4, and 10.5 Leopard.
http://rokland.com/store/productinfo.php?productsid=319
Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 2 Year Warranty.
http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
There are usb to ethernet cable.
You could try another browser.
*MAC Address*
Every ethernet port has a unique MAC Address. A router can block on a MAC Address. That is why I suggest you check out your router.
Note MAC is not Mac. MAC is all upper case.
definition: http://en.wikipedia.org/wiki/Mac_address
*Ethernet port hardware*
I'd say this was some kind of strange hardware problem.
*Dns problem?*
It has symptoms of a DNS problem. The little traffic is a symptom of the problem. You said all the numbers were the same, however.
Verify DNS
apple > system preferences > network
Double click on network connection you are using.
Pick the TCP/IP tab.
Verify that you have a DNS Server. If you do not, look on your windows machine and see what the net address is. You can also pick using DHCF and still enter you DNS server address.
You can use
harddrive > applications > utilities > network utility
to diagnose the situation.
You can ping google.com. Result:
Ping has started ...
PING google.com (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=215.362 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=279.597 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=189.747 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=250.657 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=183.232 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=243.753 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=173.108 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=230.239 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=180.639 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=232.177 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 173.108/217.851/279.597/33.615 ms
If that does work, try pinging 64.233.167.99 Result:
Ping has started ...
PING 64.233.167.99 (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=189.655 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=213.471 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=257.873 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=172.745 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=226.723 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=171.883 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=260.308 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=172.963 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=198.840 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=181.215 ms
--- 64.233.167.99 ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 171.883/204.568/260.308/32.247 ms
If pinging 17.254.3.183 works but pinging Google.com doesn't. You have a bad DNS Server address.
BDAqua suggests in a post.
You can use OpenDNS for looking up web addresses.
Put these numbers in Network>TCP/IP>DNS Servers for a try...
208.67.222.222
208.67.220.220
I think they now pretend you need to join to use, but you don't.
https://www.opendns.com/homenetwork/start/device/apple-osx-tiger
(Please note that you do not need to a joint Open DNS to use it.)
http://discussions.apple.com/message.jspa?messageID=5908432#5908432
Google provides free dns lookup too. There numbers are:
8.8.8.8
8.8.4.4
Robert
=======================================================
I suggest that you try pinging Google.com.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ping -c4 google.com
PING google.com (64.233.187.99): 56 data bytes
64 bytes from 64.233.187.99: icmp_seq=0 ttl=245 time=177.617 ms
64 bytes from 64.233.187.99: icmp_seq=1 ttl=245 time=251.899 ms
64 bytes from 64.233.187.99: icmp_seq=2 ttl=245 time=169.291 ms
64 bytes from 64.233.187.99: icmp_seq=3 ttl=245 time=250.119 ms
--- google.com ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 169.291/212.232/251.899/38.894 ms
mac $ ping -c4 64.233.187.99
PING 64.233.187.99 (64.233.187.99): 56 data bytes
64 bytes from 64.233.187.99: icmp_seq=0 ttl=245 time=176.723 ms
64 bytes from 64.233.187.99: icmp_seq=1 ttl=245 time=247.889 ms
64 bytes from 64.233.187.99: icmp_seq=2 ttl=245 time=176.890 ms
64 bytes from 64.233.187.99: icmp_seq=3 ttl=245 time=244.623 ms
--- 64.233.187.99 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 176.723/211.531/247.889/34.744 ms
mac $
Analysis: If you cannot ping Goolge.com but you can ping 64.233.187.99, then you need to enter you dns address. For some reason Mac OS X sometimes doesn't set the dns. You can set it manually.
apple > system preferences > network
tcp/ip tab and enter address of dns servers
example 162.33.160.100
You will need to use a different number.
PS.
You are a little short on stating results. You state what you did, but I have to guess the result.
Did: X
Result: Y
Did:
1) Power Book's ethernet cable plugged into router port 5. Working to yahoo.com.
2) Unplugged power book's ethernet cable from router
3) Plugged eMac's ethernet cable into port 5.
Result: eMac using Firefox was not able to access yahoo.com
Robert
Maybe you are looking for
-
Application mgr. not working!!
Have found one more problem in my nokia 5233. Today while playing around with my 5233, i found that now when i try to open app. mgr. on my phone to uninstall my installed apps, its not working anymore. its was working till yesterday. Now whenerer it
-
Maximum open cursors exceeded and cqj0 trace
From this morning on the database is reporting the maximum open cursors exceeded in the cqj0 trace. When I see the alert log the error message appear again and again. I try to solve it by setting the open_cursor parameter but the problem do not disap
-
Internal LDAP Session Variable Population
All, I can find plenty of documentation on how to populate a session varible from an external LDAP server. How do you populate a session variable from the internal LDAP server? I can't find documentation on this anywhere. Thanks in Advance, Josh
-
Is Adobe Flash Player compatible with my Macbook Pro?
I tried to go on Youtube but it wouldnt let me because it said I needed Adobe Flash Player but I didn't want to get it because I dont know if it will mess up my macbook.
-
Using timeline in Chapter selection
I'm using the timeline to build a scene selection menu. That works. What i want to happen is that at the end of ever chapter it goes back tot he scene selection menu instead of just going to the next chapter. So that the user has the option to watch