E71 -- positioning server changed after F/W upgrad...

Hi Nokians,
After I have upgraded E71's firmware to 200.21.118, the GPS positioning server address is changed from
supl.nokia.com
to
h-slp.mnc016.mcc502.pub.3gppnetwork.org
Now my A-GPS not working. Previously, it took less than 1 minute to show my current position.
On another issue, If I turn "assisted" off, GPS is not working as well -- not able to showmy current position.
200.21.118
27-11-2008
RM346
NOKIA E71-1(26)
Solved!
Go to Solution.

mecool2008 wrote:
mecool2008 wrote:
On another issue, If I turn "assisted" off, GPS is not working as well -- not able to showmy current position.
After fiddling around the GPS, and reading some posts here, my observation is as follows:-
If "assisted" is off and indoor, satellite cannot be locked, so "Map" will not show "my position".
If "assisted" is off and indoor but close to door or window, satellite maybe (but take a long time) or may not be locked
If "assisted" is off and I'm driving, satellite locking is about 5 minutes - 10 minutes.
Conclusion: best enable "assisted". Downside is, there GPRS/data charges by operator.
GPS signals are too weak to make it through most buildings, so your observations are not surprising.
I believe Assisted GPS using cell information to query a backend server to determine your approximate
location very quickly and then that helps the GPS to lock on faster. I've observed that a pure an simple
Garmin GPS can take 10 minutes or longer for initial lock, which makes Assisted GPS really attractive,
despite the additional cost.
Sanjay Mehta
Motorola "Brickphone" circa 1996, Alcatel One Touch, Ericsson R380, Sony Ericsson T220, Sony Ericsson T630, Nokia E50, Nokia E61i, Nokia 9300i, Nokia E71,Nokia X6, Google Nexus S, iPhone 4S

Similar Messages

I recently upgraded from Leopard to Snow Leopard and I noticed that I have more capacity available on the Macintosh HD. I checked my files and applications and they are still on my computer. Can capacity on the HD change after an OS upgrade?

I recently upgraded from Leopard to Snow Leopard on my MacBook and I noticed that I have more capacity on the Macintosh HD than before the upgrade. I checked my files and applications and they are still on my computer and nothing appears to be missing. Before the upgrade I had around 111 GB capacity with around 10.50 GB available on the Mac HD but now after the upgrade I have 119 GB capacity and 20.92 GB available. Can capacity on the HD change after an OS upgrade?

No, but the upgrade removed unneeded PowerPC code and changed the way free space is determined.
(72071)

IDVD Quality Changed after Snow Leopard Upgrade

I created two different iDVD projects (slide shows with music) and burned them to DVDs - great quality, no problems with transitions, or quality of slides displayed. These copies were viewed in a BlueRay player, etc. After I upgraded to Snow Leopard I made two more copies without adding anything to the projects or changing the project settings. Quality is now terrible. The transitions are choppy, and each slide is displayed slightly less bright than it should be, then it jumps to a normal brightness, then goes back to a dimmer setting as the photos change. This did not occur on the originals before the OS upgrade. If I run the project on my MAC it all looks fine. This problem comes up after burning to DVD.
Any ideas?

Hi TJ1955
Welcome to apple discussions. Sorry to hear about the issues with burning to disc you are experiencing at the moment. I'm not sure I can help with this issue without being directly in front of your mac and seeing what's going on. So I'll simply supply you with the apple KB aticle detailing / troubleshooting burn issues to dvd.
http://support.apple.com/kb/HT1583?viewlocale=en_US
If you opt to return to the forum we'll also need more info on the mac model you are currently using and which third party items you have connected to it (if any). Lastly we will need to know how much available hard drive space is remaining on the boot volume (your main startup HD) as well as what type or brand of dvd's you are currently using and if it varied from the original /first burn.
As a final resort you may wish to try the following. Burn your iDvd project to a disc image from the file menu within iDvd (provided you have the available HD space). The disc image acts exactly like a dvd so use apple's dvd player to test for proper playback. Assuming it plays exactly as expected, then burn to Verbatim, Taiyo Yuden, or Maxell Dvd-R at 4x. Please avoid using Memorex while we troubleshoot your issue here. This latter brand of dvd's tends to introduce additional variables into the equation making troubleshooting all that much more complicated. Thereafter, (assuming we resolve the issue) feel free to use whatever brand works best for you and your mac.
Hope this helps but if not come on back.
Message was edited by: SDMacuser

Camera Quality Changed After 10.2 upgrade

After upgrading to OS 10.2. the quality of the camera just changed. With the flash on, the images are sooo dark you can hardly see the images. A lot clearer when you take a picture without it. regardless if the area is really dark, a bit dark or with enough light. The rleft side is without the flash and the right is the one with flash.

Let me suggest you manually install the most recent official OS, 10.2.0.1803.
Upgrading OS10 devices using Autoloader
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My N95 region was changed after the NSU Upgrade

Hi folks
I used to have this N95 configuration Nokia N95 v10.0.0.18 15-03-07 RM-159 (05.01). Note that I had Bulgarian language in the languages. After the update I have V 11.0.0.26 17-04-07 RM-159 Nokia N95 (66.01) and no more Bulgarian ?!?!?
Any idea how to fix this
Lumia 920 OS version: 8.0.10521.155
FW revision number: 3047.0000.1326.2002

m8,
i think that's an updater issue! this is what happened to me, i download the software updater from Ireland, & then try to upgrade my N91-2 firmware it says there's no upgrade yet for my phone though i knew there was! what i did was to download the updater from southeast asian region(i bought the phone in HK during my travel there)& run it, voila i do have an upgrade & upgrade my phone firmware. it took more than an hour on a 128k dsl line!
since English language always on any region i guess i have no problem but there is support for other east asian language which i don't care!
this is a long shot, try to download a new software updater from your region, & give it a second go.Message Edited by android on 14-May-200709:03 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

LR4 Slider change after OSX Mavericks Upgrade

Anyone else having this issue? My sliders have changed to white and are very large. Adobe site recommends the 5.2 upgrade to fix it. I'm not ready to upgrade.

Unfortunately you will have to downgrade your OS or Upgrade Lightroom or live with the problem. I don't think you can expect Adobe to upgrade their past versions to be compatible with a new OS and they probably won't. You can always wait to see if Apple considers this a bug and fixes it in an update.

Adjustment effects changed after upgrades

Here is the problem statement: the effect of certain adjustments made in previous versions of Aperture changes after some Aperture upgrades. As a result, files processed in Aperture change appearance, sometimes dramatically. Does anyone have a method of managing this problem?
I believe that the behaviour is inevitable; Aperture applies adjustments to the orginal master at "run time". This means that as underlying processing methods are changed between different versions of the software their effect on the final outcome, especially in conjunction with other adjustments, can sometimes be dramatically different. For some adjustments, like the RAW processor, Apple provided an "Upgrade" control that allows you to decide whether or not you want to risk the upgrade of that adjustment for a particular image. However, I found that many times there are more changes that cannot be manually managed.
When I open an older RAW file with many adjustments, for a few seconds I can still see the old preview of the image. The preview looks exactly as it should. This only lasts while the engine is recalculating and applying the adjustments according to the new method. Then, Aperture rebuilds the image preview and I can clearly see the difference (usualy the result is disastrous). Having thousands of processed RAW files, pulling up one of them feels like Russian roulette: I never know whether I lost my work or not.
Other than exporting all processed files as TIFFs BEFORE ANY Aperture upgrade I cannot think of a reasonable way to mitigate this. Aperture vaults are useless in this case, as the new version of Aperture re-applies all adjustments according to the new methods. (Please note that versions that do not have certain Aperture adjustments applied are fine; all TIFFs processed externally are unchanged, unless they have Aperture controls applied at the end of the workflow)
Any ideas, anyone?
Thanks in advance,
Sorin Vacaru

The latest is the Highlights and Shadows adjustment. I am not 100% sure when it changed (I could find out, though), but if you open with version 3.4.3 older images that used the H&S adjustment you can actually see an "Upgrade" button in the H&S adjustment panel.
But Apple took care to provide backward compatibility, because they wanted to ensure, that you will be able to keep the old settings. Only if you willingly press that "upgrade" button your images will be reprocessed. In my library not a single image did change.
A clear indication of the problem that I have is that when I open and old edit I can still see the old (correct) preview, until Aperture reprocesses the adjustments and the preview. There is nothing I can do from that point onwards to recover the old edit and look.
Have you changed the Preview settings? In the latest version you can opt to use the camera previews instead of Aperture generated previews (In the Import tab of the Preferences panel). If you toggled recently from "Camera previews" to "Standard Previews", any rebuilding of previews will change the previews you are seeing.

Re: (forte-users) Unstable server ENV after upgrade to Forte30M2.

I see/suggest a few things:
1) In your #1, you mention ".... development and test environments which use the
same Forte 3M installs through links ...". This concerns me. On our UNIX box
each environment has it's own directory containing it's own install. If your
environments are some how sharing a node manager, log directory or processes (to
name a few things) that is a recipe for disaster. They may be competing for
resources and usually the first one started will win.
2) I haven't done a lot with compatibility levels, but if an application built
in dev is to run in test it may be important that node managers and services
(autocompile, codegen etc.) be at the same level (????).
3) Check the definition files, to make sure the two environments operate
independently. If they are both trying to write to the same log file the one
started up first will work while the second will not as the file will be "busy".
4) We usually use rpcreate (newer version) to create brand new repositories.
Than we export/import the source code that we need. Also it is important to
force compile ALL plans in a workspace at least once after doing the import.
This will ensure that all of the code is "speaking the same language". The other
compile, only compiles those pieces of code that changed from the last compile.
Hope this helps.
Kelsey PetrychynSaskTel Technical Analyst
ITM - Technology Solutions - Distributed Computing
Tel (306) 777 - 4906, Fax (306) 359 - 0857
Internet:kelsey.petrychynSasktel.sk.ca
Quality is not job 1. It is the only job!
"Braja Chattaraj" <forte_brajachotmail.com> on 09/13/2000 03:43:57 PM
Please respond to chattaraj_braja_NONLILLYlilly.com
To: forte-userslists.xpedior.com
cc: (bcc: Kelsey Petrychyn/SaskTel/CA)
Subject: (forte-users) Unstable server ENV after upgrade to Forte 30M2.
We are running Forte 3M2 clients and server in our test environment with
clients on NT and server on Solaris 2.6. Eversince the upgrade from 3L to 3M
we have been having an unstable environment that does not remain alive for >
10 mins. These are the details of the Forte installs and server setups :
1. The server hosts the development and test environments which use the same
Forte 3M installs through links (same ftcmd, ftexec, nodemgr, etc.). The
environments are at compatibility levels 0 and 1 respectively.
2. The two environments have the same definition files (defining the ENV
variables), though seperate copies and the two environments are hosted on
different ports on the same server.
3. While building the new 3M environmnets in DEV and TST, we exported the
old 3L repositories and imported them into the new 3M repositories and
deployed the applications.
While the DEV environment is stable the TST environment is not. This has
been observed while moving plans between the environments (export and
import) using fscript commands, deploying the apps after the move using
fscript, and testing the apps. Sometimes it has come down right after a
startup. There is no programatic reference to the environment agent in the
code. So, a programatic shutdown is ruled out.
Does anybody have a clue or a similar experience ?
Thanks.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BRAJA KISHORE CHATTARAJ
Consultant, Analysts International.
Work : Sphinx Pharmaceuticals (A division of Eli Lilly & Co.)
(919) 314-4134
Home : 1801, Williamsburg Rd., #41H, Durham, NC 27707.
(919) 463-7802
E-mail : forte_brajachotmail.com
Visit us www.analysts.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://profiles.msn.com.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

We found a solution to our issue.Their desktops were in a lockdown environment and the essbase.id file located in the windows directory was locked as well. This file is responsible for assigning ports etc and it couldn't be updated for the 6.5.4p2 upgrade. Once the file was deleted and the user reconnected to Essbase, the essbase.id was reset and they could connect.

Excel layout changed after EHP5 upgrade from EHP4.

Hi All,
We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
This is affected us as we have lot of macros enable for the excel files.
Request you all to help. Is there any sapnote, anyway we can resolved this issue.
Thanks

Hi Markus,
Thanks for reply.
I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
New Format Example
Production plan
Description                        Material                               Sales doc.
IRB 2600 M2004                 3HAC020536-018              104861
IRB 2600 M2004                 3HAC020536-018              2BT0615486
OLD Format
Production plan
                                      Description                    Material                               Sales doc.
                                      IRB 2600 M2004            3HAC020536-018               104861
                                      IRB 2600 M2004            3HAC020536-018               2BT0615486
Hope this above will help to make it clear.
After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
Thanks
Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

Changes after firmware upgrade in nokia 3250

hi i have nokia 3250 and want to are there any changes after upgrading firmware beacuse before i owned nokia 6270 and after upgrading firmware the music volume on my headset became very low and i dont want same wit my 3250

yeah, the N80 has a history of being buggy. Even with the latest firmware. Its a shame, because it was a damn good phone. Anyhow
You can download Yahoo!Go from:
http://uk.mobile.yahoo.com/go
Not sure about the others. (My operator, Three, offers Yahoo Messenger and Yahoo Go to its customers, but they "are incompatible with the N80" if you can believe that.)
Anyhow..
Currently using E71, looking at options

Connection to License Server Failed after upgrade to PL45

Hi Experts,
My client is using SAP B1 SP01 PL39, Windows 2003 OS Server. I have recently upgraded the server to PL45 but after the upgrade, the workstations are encountering "Connection to License Server Failed" every time they log to the server.
Our workaround is to go to Server suite Manager> License Manager> settings> click 'set' and the message "The port is now updated....". After which, the workstations can now log to the server.
The problem is we cannot do this workaround everyday. I tried changing the server connection in the server suite manager to: IP no., server name or localhost but still to no avail.
A help from you guys would be very much appreciated.
Thank you.
Edited by: Philip Eller on Jul 2, 2008 9:12 AM

Hi Regelio
As Van mentioned above,the issue may caused by the TAO NT Naming service.
Please check the status of TAO NT Naming service/License Manager
when the issue happens.And in case the error is really caused by
those services,please try to re-install the whole server tools.
Also,if the issue still persists,as another workaround we suggest you to use a simple
batch script to test the Status of the TAO NT naming service,
and restart it when the services was stopped.
Such a script can be launched with windows scheduled every several
minutes.
@echo off
net start find "TAO NT Naming Service"
IF %ERRORLEVEL% EQU 0 (
echo Ok - "TAO NT Naming Service" is running
) ELSE (
echo Error - "TAO NT Naming Service" is not running
net stop "TAO NT Naming Service"
net stop "SAP Business One License Manager 2005"
net start "TAO NT Naming Service"
net start "SAP Business One License Manager 2005"
Regards,
Syn Qin
SAP Business One Forums Team

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

Satellite L855-124 can't change display brightness after Win 8 upgrade

Hello everyone,
I have a problem with my Toshiba Satellite L855-124 PSKACE laptop.
After upgrading to Windows 8, I can't change the brightness backlight of the laptop screen.
There seems to be an error in the graphical driver.
When I install the Windows 7 graphical AMD driver under compatibility, it works again but bugs out on other areas.
Anyone have any ideas?
Even after using the upgrade assistant provided by Toshiba it does nothing.
Also the drivers for my laptop are poorly updated. Dating back to 2012.
I have also called tech support, they told me that a driver team will be fixing the issue.
That was 2 months ago.
Is there anyone from Toshiba that can help me with this please?
Thank you.

The document provides info about the notebook models:
Satellite L870, Satellite L875, Satellite C870, Satellite C875, Satellite Pro C870, Satellite Pro L870, Satellite C850, Satellite C855, Satellite L850, Satellite Pro L850, Satellite Pro C850
PSKBLE, PSC8EE, PSC8FE, PSKBME, PSKCCE, PSKCEE, PSKDLE, PSKDME, PSKDNE, PSKCDE, PSKCCR, PSC8ER, PSKCCF, PSKCCV, PSKCEV, PSKBLR, PSKDLV, PSKDLR, PSKDLF, PSKG9E, PSCBBE, PSKFPE, PSCBZE, PSCBYE, PSKG8E, PSKFNE, PSCBDE, PSCBYR, PSKFNR, PSKCER, PSCBCR, PSKG8R, PSKFLE, PSCBCE, PSKG8V, PSCBYV, PSCBYF, PSKG8F
Choose the driver released for the following models

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

Sql server opendatasource not connected after server changed?

hi. We used to fetch data from one server (SQL Server 2008). Now, we have changed to New Server.
After changing to new server, we are unable to fetch or connect with sql server. No Error or Warning Messages after execution. pls mention the reason and solution

Hi jmohan1984,
Please ensure you have sufficient permission access to new SQL Server to query data. Here is a good KB article regarding how to transfer logins and passwords between instances of SQL Server, please see:
http://support.microsoft.com/kb/918992
Regards,
Elvis Long
TechNet Community Support

E71 -- positioning server changed after F/W upgrad...

Similar Messages

Maybe you are looking for