E71: Unread messages counter does not go beyond 99

The count of unread messages on the main screen of my E71 has remained at 99 despite the countless messages i've been receiving and not reading..I was puzzled by this and got down to counting my unread messages.. the number was 115..and i'm getting more messages by the minute..but the main screen cheerfully flashes the number "99"!
Message Edited by namratz on 12-Dec-2009 03:26 PM

I'd just like to add that this continnues to happen even after installing Spotify on a newly formatted machine. The Messages indicator inside the app also still says "1", not just the desktop icon. Something tells me that this is a problem on Spotify's end. Like there's a message that they have flagged in the database as unread, but it isn't being sent to me.

Similar Messages

Mail - unread mail count does not decrement

When reading a stack of new email I find that the unread email count (little number next to "inbox" folder) does not change as I read the mail. If I click on another folder and go back to the inbox the number changes to reflect the accurate count. Annoying, but not fatal. Time for a CS version?
Using Version 3.6 (935/935.3) on a MacBook.

Fixed it per:
https://discussions.apple.com/message/22939701#22939701

Unread message count not updating in Mail.app

I am running a MBP 15" with 10.4.10 and Mail.app (version 2.1.1 build 752.3) and as you can see in this screengrab here:
the unread message count is not correctly updating.
This may actually be something for the Mail dev' team to handle, unless some one else out there in the groups has some inside knowledge about this issue.
For that matter, I do not know how to forward this to the Mail dev' team inside Apple, so if any one else does, please do.
Cheers.
Jason
MBP 15; 2.16 ghz; 2gb RAM; 100gb; Mac OS X (10.4.10) Palm Treo 680 + Cisco 1242 WAP + xo.net + Hyatt Embarcadero room service

Jason,
What screengrab?
What type of account do you have -- POP, IMAP or .mac? How many accounts do you have? Do you access your account from more than one computer?
Unread message count where -- on the Mail Icon in the Dock or in individual mailboxes? In the Dock, the Unread message count will NOT reflect any messages moved to custom mailboxes by Rules, but only those in the Inboxes.
Ernie

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

Mail trash count does not synch

I'm running the eprint app on an iPad. My Deleted Messages folder does not synchronize as my other mail folders do - the count of items is stale. The count of items is 25000, which it was the day I set this up a week or so ago. My current Deleted Items folder contains 5000 items.
Any suggestions?
Thanks,
Dan

You quote your Mail as being 4.5.   On Snow Leopard 10.6.8 you should be using Mail 4.6. (1085) Why is this?
Trash problems.   Solving Trash Problems
Then, for clearing stubborn trash.                Download Trash It! for Mac

Yahoo! Mail in Mail App on iPad 2 iOS 7.0.3 Shows Unread Message Count

Yahoo! Mail in Mail App on iPad 2 iOS 7.0.3 shows unread message count when the Inbox is empty. This has been an ongoing issue since iOS 7 rolled out. I was hoping with this latest update that this problem would be fixed. Just wanted to report it. If someone knows where bugs get reported, I'd appreciate the link.
None of my other mail programs have this problem.
I perform a reset (holding down the Home button and the Power button) and sometimes this clears it out and sometimes not. Plus, I don't want to reset my iPad on a constant basis just to clear my mail count.
Any insight or additional information is appreciated.

I think it's an issue with yahoo. I have the same basic set up as you and will open my mail, see that I have 4 unread for example, read them, exit mail and have the red bubble still reading 4 unread mail. Usually it catches up and corrects in a little bit.
Probably jus a glitch between yahoo and the mail app and not much you can do as a user but wait it out or get used to it...or I understand that there's a yahoo app if it really bugs you.

Some solutions for screwy unread message counts

I've recently found solutions to two Mail.app (version 2.0.5) problems
I'd been having, and figured I'd share them. My apologies if these
duplicate things already said here by othersq; a quick Google didn't
turn these up for me.
Problem 1: Mail spontaneously becomes unread after reading it. In my
case, at least, this was directly correlated with installing the
GPGMail plugin, and went away when I removed the plugin. According to
http://www.sente.ch/Lists/gpgmail-users/Message/847.html you can solve
this problem by tweaking GPGMail's configuration; I haven't tried this
myself yet, but will soon.
Problem 2: Unread message counts are sometimes unreasonably high in
IMAP folders. In my case, I would receive one piece of email, and my
"Unread Messages" Smart Folder would report that I had 8 unread pieces
of email. When I would click on the folder, it would show me just the
one piece of mail, and the count next to the smart folder would go
away.
I should note here that I had configured Mail.app NOT to move deleted
messages to a Trash folder.
It turns out that when I selected View->View Deleted Messages, I could
see another 7 unread --- but deleted --- messages. (All were spam that
I had manually "moved" to another folder, which, when Mail.app is
configured not to move deleted messages to a Trash folder, leaves
behind a deleted copy in the original folder. Oddly, when Mail.app
is configured to move deleted messages to a Trash folder, moving a
message leaves no deleted body behind in either the source folder, or
in the Trash folder. This seems inconsistent to me, but that's
another matter entirely.)
Anyhow, the 8-or-0 count seems to be due to an inconsistency in how
Mail.app counts deleted-yet-unread messages: when a new message comes
in, it includes deleted, but unread, messages in its unread message
count; but after you've read that new message, it no longer includes
deleted, but unread, messages when it updates the count. So the count
goes from 8 to 0... until the next time you get mail.
Incidentally, another side-effect of this bug is that partial copies
of an email message saved in your Drafts folder, and then deleted when
you sent the mail, cause the Drafts folder to show a non-zero count
whenever you receive a new piece of mail --- even though clicking on
it will show it to be empty (until you start viewing deleted
messages.)
The workaround for all of this seems to be to configure Mail.app to
always move deleted messages to the Trash folder I think this is
probably the default configuration; I had changed it for reasons which
I no longer remember.
I am posting this information to the apple.com mail suport forum and
to the macintouch mail.app forum, and I am reporting the bug to Apple
via the ADC bugtracker.
Mac OS X (10.4.3)

Sorry I am marking this solved, but it never was.
The best thing that could be done is to rely on Time Machine, or forward all of your incoming email to another address.
Apparently, there is no way to do what I asked. But there should be. So Apple, please fix this.
Again, sorry I am marking it as solved.

Unread message count problem with exchange on iPhone and iPad

Using our ecchange server, the unread message count is different (larger) on the iPhone and iPad than on Apple Mail or Outlook (Mac apps). We have tried deleting and re-adding mail accounts on iOS, checked server settings, restored iOS devices, but to no avail. The message count is consistently higher on the iOS devices than on the desktop (or web client). Any suggestions?

I am seeing the same thing and I agree with MathiasF's observation. My count seems to increase when I do a search for mail on the server. This has happened previously (iOS 5.x) but ending the Mail app always fixed it. The only way I can correct the count now is if I turn off sync for Mail on the Exchange account and re-enable. This clears my mail and causes my phone to go out and redownload. Rebooting and resetting the iPhone has not helped.
I'm on Sprint - 32GB White iPhone 4S running iOS 6.0 (10A403)

Gmail tab never updates unread message count

I'm using OS X 10.9.1 and Safari 7.0.1.
The tab that I have for Gmail never updates the unread message count. It constantly says 27 and has done that ever since I got my MacBook which has newer versions of everything over my old MacBook which was running 10.7. I've tried deleting cookies and clearing the cache and such but the tab still says 27 unread emails even though, as of this writing, I have 29 unread emails.
Is there any way to fix this?

Since I last brought this up 4 months ago, Safari has been updated to 7.0.3 and OS X is now at 10.9.2 and I'm still having the same issue. The GMail tab always says 27. Though now I can refresh the page and get it to update the count and it will continue to update correctly after that. But it always starts at 27 and I have to force a refresh of the page to get it to update.
Scratch some of that. I went into the bookmarks and deleted the "(27)" from the name of the bookmark. Now when the tab loads, it simply says "Inbox - " followed by my email address. And only after I reload the page does it have an unread email count which is correct.
Does anyone have any suggestions?

The OE New Message box does not open when I click on an email address in Firefox. This is not a problem when I use MS Explorer. How can I fix it?

OE is set as my default email in both Firefox and Windows XP. When I click on an email address on a website within Firefox the OE page comes up but the OE New Message window does not open. When I go to the same webpage using MS Explorer and click on the same email the OE New message does open. Is there a bud in Firefox that prevents the OE New Message from opening? Is there a way I can fix it?

See this:
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

Inbox and Drafts show unread message count of all folders within. Can I get the local folders to do this too?

I'm filtering mail into folders in the local folder tree. There may be two or three levels, e.g., Local Folders -> Lists -> OS -> MacOSX. Mail that is unread in the MacOSX folder is counted and displayed when the MacOSX folder is visible. However, keeping the entire tree on display is a nuisance and it is long, so I don't see things ate the bottom. I have to scroll to reveal the rest of the items in the folder tree. For these reasons I'd prefer to have the folder tree in its minimal state.
Is it possible to have the the top level folders display an unread message count for all the enclosed folders?

when I collapse the folder tree of local folders, it shows the unread count for sub folders.

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

ESRfor PI 7.1) source message idoc does not exist in software componet

Hi ,
When using the sap predelivered integration content in the repository the above error (ESR ( for PI 7.1) error : source message idoc does not exist in software component version id) is coming while opening the message mapping interface. Is it due to some content missing or a sp level mismatch ?
Thanks
Sri

Hi,
I'd say you need to import some other SWCV which has all the IDOC typos you use in your scenario
probably this is a prerequisite for importing your SWCV
I don't think this is related to sp level or anything like that
it's just that SWCV is missing
Regards,
Michal Krawczyk

Message Interface does not exist in IR u0096 but it does!

Hi, well again i have a problem. I am still trying to get the XI-demo Checkflight. to run but there are some obstacles on my way.
I just wanted to check a MI given in the ID to check the attributes and picked it in the ID to get linked to the IR but a pop-up appears saying
Message Interface does not exists in Integration Repository
Whats the reason for this because obviously it is there, still existing.
I tried to refresh the cache of all XI-components, did a server restart but nothing seems to be working.
On the other hand I have some other questions:
-     Why is it not possible to delete an object (business system) from the ID? I know because of the dependencies of the different channels but it should be possible because of re-generation of the communication-channels (this was also my approach for solving the problem mentioned above!)
-     When do I have to refresh the cache in general? Is it indefinite whenever I want to or it seems to be the right time because something is not running the way it should and it seems a little odd

Hi Carsten Heinrich,
This will help you,
1)     Cache Connectivity Test
In RWB component monitoring, we now have the option of checking whether the cache-connectivity is functioning correctly. This is useful when we are experiencing problems when updating the runtime cache. The system displays a separate window in which we perform the test. If no previous tests have been performed, the system displays a corresponding message. Otherwise, the system shows when and by whom the last test run was started, together with the result of this test.
To start a new test run, choose Start Test.
The system displays the first results of the test run. Since the whole test takes some time, we can update the displayed results if necessary.
To Update the displayed results, choose Refresh Display.
The overall result for each component is displayed as a green, yellow, red, or gray symbol. A green symbol is only displayed if both update steps for the runtime cache were successful, that is, they both have a green symbol.
2)     Cache notification status
a)     Start the Integration Repository.
b)     Select Environment ® Cache notification.
c)   Have a look at the entries for the relevant user and date.
d)   Have a look at the entries for the relevant cache instance, user and date.
               3)    Cache update and resend the message
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
c)     Call transaction SM58 to check the status of the refresh process.If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.
         4)     Deleting the SLD Cache
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss

Message interface does not exist in any software components

Hi masters,
I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
note: I have read all the posts about this problem but nothing has solved it.
I will describe more or less how is my SLD.
First all, my Technical System is an Web AS ABAP (non a third party).
I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
I have checked the GUID, and that's good.
NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
Regards and thanks

did you mean:
SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
if is this, I have already done this, and still doesn't works.
Thanks

E71: Unread messages counter does not go beyond 99

Similar Messages

Maybe you are looking for