E71 User Feedback: Software, Firmware Update and B...

First, some comments about the e-mail app:
1. Actual headers can be seen nowhere (Received:-Lines, X-...-Headers, etc.)
2. Cannot directly tell the application to store sent mails in a "Sent" folder, have to use server-side hacks with the "send copy to myself" option :-( Also cannot tell it to store deleted mails in Trash folder.
3. Reply flag is not set when replying (I cannot see on my PC using e.g. Thunderbird which mails were already replied to or not)
Oh well, and BTW a shortcut for smilies in text messages is missing completely.
A countdown timer is missing. Much simpler Nokia phones have it.
Another detail: whereas the default action for the messaging one-touch key is to open the emails, I would have liked to assign that to the messaging key (LONG press). Apparently that is impossible though. :-\
Futhermore, not all keys assignments intuitive, and one could more often use the volume up/down keys, which are in use almost never. I know there are applications for that out there, but still, who is doing the UI testing of these devices? ;-)
I also have the feeling that network reception is worse than with my old Nokia phone.
Apart from those (and more) details, I nevertheless like the device very much, the UI is fast and cool and does more or less everything I want it to do!
The battery lasted quite some time (5 days?) after the first charge. After that, no such luck. Maybe 3 days now.
Using the Update Software as non-administrator does not warn that the Administrator password will be required to install several devices during Software Update. I wonder what happens if one does not.
Backup/Restore:
- CALENDAR seems to be saved BUT IS NOT RESTORED (neither using backup to memory card nor PC Suite)
- does not backup/restore phone lock delay
- does not backup/restore GSM/UMTS/dual network setting
- M!Weather Application was not backed up/restored, not sure why, Device Status not either
E71-1 / FW 210.21.006

First, some comments about the e-mail app:
1. Actual headers can be seen nowhere (Received:-Lines, X-...-Headers, etc.)
2. Cannot directly tell the application to store sent mails in a "Sent" folder, have to use server-side hacks with the "send copy to myself" option :-( Also cannot tell it to store deleted mails in Trash folder.
3. Reply flag is not set when replying (I cannot see on my PC using e.g. Thunderbird which mails were already replied to or not)
Oh well, and BTW a shortcut for smilies in text messages is missing completely.
A countdown timer is missing. Much simpler Nokia phones have it.
Another detail: whereas the default action for the messaging one-touch key is to open the emails, I would have liked to assign that to the messaging key (LONG press). Apparently that is impossible though. :-\
Futhermore, not all keys assignments intuitive, and one could more often use the volume up/down keys, which are in use almost never. I know there are applications for that out there, but still, who is doing the UI testing of these devices? ;-)
I also have the feeling that network reception is worse than with my old Nokia phone.
Apart from those (and more) details, I nevertheless like the device very much, the UI is fast and cool and does more or less everything I want it to do!
The battery lasted quite some time (5 days?) after the first charge. After that, no such luck. Maybe 3 days now.
Using the Update Software as non-administrator does not warn that the Administrator password will be required to install several devices during Software Update. I wonder what happens if one does not.
Backup/Restore:
- CALENDAR seems to be saved BUT IS NOT RESTORED (neither using backup to memory card nor PC Suite)
- does not backup/restore phone lock delay
- does not backup/restore GSM/UMTS/dual network setting
- M!Weather Application was not backed up/restored, not sure why, Device Status not either
E71-1 / FW 210.21.006

Similar Messages

  • How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working great.

    How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working flawlessly.

    I appreciate the responses, however my initial post was too vague. I apologize and will explain.  The specific issues are the window closes occasionally when loading something large, that has ceased in the last day or two. My battery life is no where near the second gens, is that the extra hardware at work? I thought that had been accounted for? One of the frustrating, albeit humorous occurrences is when I placed the second and third gen within 1 foot of each other, turned off LTE, and streamed a video.  From every location the second gen out ran the new model on 3G signal, lol.  Not a huge deal since I have wi-fi or LTE pretty much everywhere I am, but disappointing none the less. 
    The new apple tv is great, except for the same thing everyone is posting about. HD iTunes library streaming taking overly extended load times. I don't expect it will take too long  for apple to address that issue. I'm new to apple, last 6 months, but they seem to have excellent support!  It is definetly highly rated.

  • Software/firmware update stalled

    I was just doing an update of software and firmware "strongly recommended" by apple for all users.  A firmware update was included in this package.  The process has stalled.  It got to the point where I now have a message on the screen saying it is installing software and do not turn off computer.  It has been stalled at this point for over 12 hours.  What do I do now?  If I turn off or attempt to restart, what will happen?

    I think I have answered my own question. 
    I was installing several software updates plus an EFI firmware update.
    I just got off the phone with a guy at apple who told me when the software update process seems to be permanently stalled to try:
    1) try force quit.  Sometimes this will do the trick.  (In my case it didn't)
    2) Bite the bullet and turn the computer off.  And hope for the best.
    3) Upon restarting, hopefully everything will go smoothly and you can then run the check for updates routine to see whether the updates did or did not successfully install.
    4) If upon restarting the computer stalls on the dreaded grey screen your choices, according to him, are to either call apple and pay for some tech support or take it to a genius bar at an apple store.
    Happily, in my case, the restart worked flawlessly and I am back in business.  The EFI firmware update has not been installed.  Reading the description, I'm not clear why I even want it so I am going to let sleeping dogs lie.

  • Latest firmware update and more problems with 30" external displays?

    Hello,
    New macbook pro user since a few weeks, so first post here.
    I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
    I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
    Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
    It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
    Is anyone else in a similar situation after the latest update?

    Hello,
    New macbook pro user since a few weeks, so first post here.
    I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
    I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
    Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
    It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
    Is anyone else in a similar situation after the latest update?

  • How to know when a software/firmware update is out?

    This is my 1st iPhone and was wondering when a software/firmware update is available do you get it through the iPhone itself or do you have to connect it to iTunes to get it?

    When you connect your phone to iTunes, you will be notified of an available update. You may also see posts here or elsewhere announcing an update (after the fact).

  • HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    Resolve specific iTunes update and restore errors - Support - Apple
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

  • Firmware update and SATA II hard drive (continued)

    This thread is a continuation of [Firmware update and SATA II hard drive|http://discussions.apple.com/thread.jspa?threadID=2054387]. The original thread is getting long and causing some browsers to time out.

    fishbert wrote:
    oldmanpants wrote:
    I'm interested to hear how Fishbert is doing with cable replacement…
    So far, so good.
    One of the symptoms of this issue is an incrementing of the drive's CRC error count.* Back on the 28th (right after doing the cable replacement), S.M.A.R.T. Utility told me my CRC error count was at 6322. From early July when I upgraded to EFI 1.7, until the rollback tool was released (in August?), this was how high the counter had climbed… plus a bit from testing back-and-forth when PU1.0 showed up.
    Anyway, 6322 was the count on 11/28/09. A bit ago, it read 6324 (12/05/09). I don't know where those 2 extra came from over the last week, and I'm going to continue checking in on it, but 2 is a far cry from the 6000 or so over a month, maybe a month and a half. And as for user experience, I haven't seen any of the freezing typical from this issue, either.
    * Again, there seems to be more than 1 issue that people have come in here with, but CRC errors was identified fairly early on as a characteristic of this issue, and is one I definitely saw on my machine, so I use it here to illustrate the difference I see.
    it seems like only solution is changing the SATA-cable, the problem; it's out of stock at third party vendors. (hot Christmas gift, everyone is buying it), Fishbert how is it holding? give us an update.

  • 10.4.6/firmware update and sync not working? No, .mac is down

    I went to sync .mac this morning, and I guess it was the first time since installing the firmware update and 10.4.6. It first said another computer with the same name was registered, then hung. Next time it said it was not registered and proceeded to sync very slowly then exit with errors. After a reboot there was still trouble. Then I thought to check and found on .mac that the sync service was down since yesterday, and remains down.
    Funny how I thought my system was acting crazy when it was the .mac system itself that's experiencing problems.
    Mark

    I got my bookmarks to sync this morning, but nothing else would.

  • Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Hi, KK93. 
    Sometimes a simple power cycle of the router and Mac can resolve the issue.  However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
    Troubleshooting Wi-Fi issues in OS X
    http://support.apple.com/kb/HT4628
    Also, see the article below to make sure the router setting have been optimized for performance.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Cheers,
    Jason

  • I've just had a keyboard firmware update and now my volume control buttons wont work

    i've just had a keyboard firmware update and now my volume control buttons wont work.
    Has anyone else had this problem? if so have they found out how to fix it, or is this an on going issue?

    Hi,
    Your problem has some similarities to this problem that I reported earlier this month that that still arises every few days. I was thinking that my problem was related to some sort of bug in Entourage, but maybe it's something else...
    Ken

  • Firmware Update and Windows XP

    The Firmware update killed my Windows XP partition. It just hangs when the Windows XP pict is there with the progress bar. It will boot in safe mode tho. Who knows what to do next since I don't know jack about windows, I only use it for games, it's not even hooked up to the net. Any help would be appreciated.
    ChuckBlack

    Hi chuckblack,
    Sorry to hear this and probably won't help (since you seemed to have already tried safe mode) but I could not get into my bootcamp/fusion/xp after update, until I shutdown down and did a new start. Now i'm sending this e-mail from windows. For some reason the fusion menu now shows two disk options, one labelled 0 and labelled 1. last time this happened with firmware update and the 0 eventually disappeared. As you, I only use windows for a few programs and get out of there as quickly as possible. Good luck.
    lou

  • I just did an Time Capsule firmware update and now my Time Capsule is dead.  What happened?

    I just did a Time Capsule firmware update and now my Time Capsule is dead.  What happened?

    tresbaileys wrote:
    it may be important to note that when I put my ear to the box I can still hear the HD spinning (although no lights are lit and it doesn't show in the airport utility).  Ideas??
    That is very bad.. how old is it??
    The Gen4 TC can die this way.. it is not usual but it happens.
    Leave it for several hours to cool off. Do a factory reset immediately when you try to restart it.
    The Factory Reset.
    Power down the TC.
    Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
    (I fix TC and have several reset levers bent over and jammed or broken off).
    Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
    Keep holding in reset for about 10sec until the front LED flashes rapidly.
    Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
    Tell me exactly what the LEDs do throughout this process.
    Both the main one at the front and the LED on the ethernet ports which should all flash during bootup.
    If it is less than a year.. of course Apple will replace under warranty.. 2 years in some places.. Europe .. places with stronger consumer laws. If you have applecare on a computer it should still cover the TC.
    I kind of doubt you are going to get this going again... but we can try.

  • My iMac from 2007 is slow and sometimes freezes, what can I do? (Software is updated and RAM is maxed at 4GB, CleanMyMax 2 is runed)

    Hi, My iMac from 2007 is slow and sometimes freezes, what can I do?
    All my Software is updated and RAM is maxed at 4GB. I have used CleanMyMac 2 to clean the iMac.
    I also have a problem with Wi-Fi is jumping between On and Looking for Networks

    Almost certainly that is your problem, Norton causes more problems than it ever helps. Not only is it unnessary no antivirus app is necessary. Keep your machine up-to-date using Software Update and in most situations that is all you need for security.
    You can find Norton's uninstall link at:
    https://support.norton.com/sp/en/us/home/current/solutions/kb20080427024142EN_En dUserProfile_en_us

  • Firmware update and fans

    so i recently installed the firmware update and ever since the fan has been running constantly. its definitely keeping the machine cooler, but its kind of annoying. is there an app to regulate it? thanks.

    I hate to sound negative, but if you get a fast processor, it gives off heat. If you want a nice thin form factor with very little extra space inside, the heat can't escape without fans. If the processor gets too hot, it will die.
    I really think that fans are a small price to pay for having such a powerful machine. Plus, they are a lot quieter than the fans in my old laptop!
    Just how loud are we talking here? If you can hear them from rooms away, you may have a problem.

  • Firmware Update and Software Update

    Hi -
    Can anyone tell me if the recently-released firmware update for the MacBook comes up automatically as part of "Software Update"? When I run SU, it says everything's up to date, but I'm not sure if SU would cover a firmware update. Thanks for your help,
    Shelly

    Hi Shelly,
    Then your firmware and all of your software from apple is up to date.
    If you could, look at your about this mac and check the boot rom version and SMC version, and the most recent one will show like this:
    Boot ROM Version: MB11.0061.B03
    SMC Version: 1.4f12
    Good Luck.
    yes, software updater also look into firmware updater.
    Good Luck.

Maybe you are looking for

  • Macbook Pro Hard Drives Failing

    Hi all, I've been having massing problems with my Macbook Pro 15" 2.53 Ghz laptop. I got one brand new with apple care in December of 2008. The hard drive was the standard 320 Gb @ 5400 RPM. Within approximately two weeks of operation the computer fa

  • Reading PDF with Links not working in iOS or Android

    Good day all, I have created a PDF file that has links to other PDFs.  The file would be over 500 pages long, and too large to download to devices for viewing, so we as a company have determined that the best thing is to create Bookmarks and/or Table

  • Filter Subgrid with Javascript - MS CRM 2013

    Hi, I want to filter a subgrid. My code : function FilterCasesSubgrid() { var CasesSubgrid =Xrm.Page.getControl("lots_associes"); if(CasesSubgrid==null){ setTimeout(function () { FilterCasesSubgrid(); }, 2000); //if the grid hasn't loaded run this ag

  • HT1725 Impossible compete rented movie download during vacation

    Before to go on vacation I rented a movie but my router stopped to work and I was never able to complete the download on iPad. Now I am outside the US and the download seems unable to continue. I did pay for a movie that I cannot even start to watch.

  • Copy paste ios 8

    SInce upgrading to iOS 8 (& its subsequent upgrades), I've had problems copying & pasting text between & within apps.  The amount of text to be copied doesn't seem to matter.  If I successgully copy & paste a bit of text, the successful bit of text i