E71 - Voice commands / Speech Help / Reading Email...

Voice Commands
What's with these voice commands? However I speak nothing gets recognized. Where can I record a voice command?
Why don't they work?
Speech Help
Or "Sprachbefehle" as it is coined on my German version has two (!) different voices when I go there under MENUE. And even though I have set up German/Female - I have 2 male voices (?).
That is highly inconsistant - Is that intentional?
Reading Emails
I have one Exchange account and an IMAP account configured. When in the Standby screen and I press and hold the left context button (configured as "MENUE") the IMAP account is always read out loud.
How do I change it to read the EXCHG account?
TIA,
Heinzharald
(getting a bit frustrated know...)
E71-1: RM-346, 100.07.76, 08-06-2008
NPowerProfiler: 0.03-0.05W
since: 18.08.2008

Hi,
Please bear in mind that the purpose of these forums are specifically for user-to-user support only. You will not receive an official Nokia response here.
The moderators are only here to moderate and we will not be able to provide any assistance.
If you would like to hear from Nokia, you can use the "Contact Us" link at the top of the page and then, select your country in the section "Call or Email Nokia Care".
Regards,
Concordia
~*~ New to Nokia Support Discussions? ~*~
You may want to have a look at the guidelines!

Similar Messages

I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

Can I use Voice Commands (Speech) to control the DVD Player?

Problem: I want to insert a DVD in the the DVD drive and use voice commands to stop, pause, play, move forward, move back, and quit the DVD Player. Is this possible? If so how would I do this?
Thanks in advance for your help.
Jim Minor

You can create a speakable item. Use AppleScript Editor (Applications > Utilities > AppleScript Editor) to write the appropriate AppleScript to perform the desired action, and give it a name which is the command you want to speak. Then, make a subdirectory in the Speakable Items directory named "DVD Player" and copy your script to it. You should be able to speak the name of the script when DVD Player is in the foreground and have the script execute.
An example script (Play.scpt):
tell application "DVD Player"
play dvd
end tell
Other commands that the DVD Player application understands:
fast forward dvd
pause dvd
rewind dvd
stop dvd
step dvd
go to \[ main menu / title menu / subpicture menu / audio menu / angle menu / beginning of disc \]
press \[ up arrow key / down arrow key / left arrow key / right arrow key / enter key \]
open VIDEO_TS
open dvd video folder
play next chapter
play bookmark
play named bookmark
play video clip
play named video clip
exit clip mode
obscure cursor
eject dvd
The DVD Player application also has a bunch of properties related to chapters, titles, subtitles, etc.

Ignore voice commands / Speech Recognition Server timeout

I'm fairly new to AppleScript but I've found it really entertaining and gloriously simple to pick up so far. I've been using it mostly to make my own speakable items for the Mac's voice control, and I've managed to write some basic things like voice commands to set/change volume and brightness. My goal at this point is to be able to do the majority of things I want to do on my computer by voice only. Sue me - I just rewatched Iron Man and I really wish I had a JARVIS system right now.
This means that the computer must always be listening for commands (I have set it to 'listen continuously with keyword', and set the keyword as 'optional before commands'). It defeats the purpose if I have to walk over and hit a key to start listening for commands. At the same time, I don't want to have to speak a keyword, because I will invariably forget to do so and it's also an added hassle (especially when I have several commands to say - I don't want to have to say the keyword before each command).
You might have an idea of where this is going. Obviously, if the computer is always listening, it will pick up on normal conversation and try to interpret it.
I could just deactivate voice commands when I'm not using it, but as I said earlier, I don't want to have to either hit a key or say a keyword. In other words, I want to be able to activate and deactivate voice commands by voice. Deactivating is easy. Activating is what presents an interesting problem, because if it's deactivated, how will it hear my reactivation command?
Thus, the first part of my question: is there a way - any way at all - to get voice commands to ignore commands until given some keyword, short of literally changing its settings to listen for a keyword before the command?
I decided to try to use speech recognition. This must, I think, be involved in some way, because as I said earlier, this presents the unique problem of having voice commands deactivated yet still able to recognise the reactivation command. I had noticed that while the computer is listening for a specific command, it ignores anything that isn't what it is listening for. I tried to use this to my advantage and wrote a script to listen for a reactivation command; until the reactivation command was given, the computer would ignore everything else. The problem is that the speech recognition server times out after two minutes. I have tried to increase this, but to no avail (see below for my attempts).
Thus, the second part of my question: assuming there is no other answer to my first question, is there a way to get speech recognition to listen indefinitely?
Here are the two things I tried to make the timeout last longer, specifically for five minutes (300 seconds) in both cases. Neither worked; both timed out after 120 seconds.
tell application "SpeechRecognitionServer"
set userinput to listen for {"resume voice commands"} giving up after 300
end tell
and
with timeout of 300 seconds
set userinput to listen for {"resume voice commands"}
end timeout

UPDATE: I have since come up with an alternate solution. I created two speakable items, one for 'deactivation' and one for 'activation'. The deactivation command uses UI scripting to set voice commands to 'keyword required' mode (i.e. the keyword is required before each command); the activation command simply sets it back to 'keyword optional' mode.
I figure that as long as I choose a keyword that's unique enough that it (and things that sound like it) won't come up too often in conversation, the computer will ignore anything I say once I activate the keyword requirement. Then, I only need to say the keyword once along with the reactivation command to bring it out of this 'ignore commands' state.
In a way, this is actually better, because it allows me to continue to use voice commands if I really need to, as opposed to having to say the reactivation command to get my computer to listen to me, saying my intended command, and then saying the deactivation command to make it ignore me again.
All the same, if anyone has answers to any of my two original questions, please don't hesitate to share your knowledge! It might come in handy later!

E71 crashes when using voice commands

Hi there,
I've recently updated the phone software hoping that my problem would go away, but it hasn't.
Basically, when I use the voice commands to call a contact, all is good.
However, if I have a contact with 2 or more contact numbers, none of which assigned as a default number, the phone crashes and restarts.
As contacts are not automoatically assigned a default number, when I add numbers to contacts, I must specify the default number to avoid a crash on the phone. Is there any work around for this?
Thanks for your help.
Shanks

Hi mgoksoy,
I also agree this is a nifty program. However, there is some data and internet interaction necessary for the application. It doesn't seem to use a lot, but some is used. All of the logic to analyse the speech is online, allowing the application to improve over time.
This diagram at the end of the technology page should give a clear picture on the interaction.
(See here: http://www.vlingo.com/technology/)
Thanks again for introducing this application.
Shanks.

HT4623 I have just activated voice command then i can't scrool down . It is letting me in trouble. Need Help.

Whenever I open any game the game automatically closes. Then I open setting and saw that there is a voice command then I activated the voice command after that I can't scroll down the page so I want to OF this thing. Help Me Please. This is letting me in big trouble.

There is no Voice Command. there is Voice Control when you can control the Music app via voice commands. There is Also Voice Over whe the iPod spped the commands to you.
You may have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Ios 5 possible firmware bug for iPhone 4; Voice command/text-to-speech doesn't work properly.

I upgraded an AT&T and Verizon iPhone 4 to the ios 5 firmware, and I am having the same exact issues for both phones. When using the voice command a few times, the audio voice does not come through the "speaker" (referring to the speaker located at the bottom of the phone). Instead, the audio voice goes through the receiver which is on the front face of the phone, on the right of the camera.
For example, say you want to use the voice command to dial a phone number. You would enable voice command by depressing and holding down the "Home" button and give the command "dial...1-800-452-3456", the phone would then repeat the phone number back to you through the "speaker". However, when I did this a few times, the voice instantly goes to the receiver instead. I found no way to fix this problem. I tried the following and none of these solutions worked:
Turned the phone off and back on again
Hard reset (held down the Home and Lock button for 10 seconds)
Restored the phone, and set the phone up as a "new iPhone" instead of restoring from back up
After trying to restore both iPhones and still have the same issue, I made an appointment to visit Apple. I took the Verizon iPhone 4 to Apple, and the employees handed over a refurbished iphone in hopes to solve this issue. However, this refurbished phone still had the same exact issue.

Of course I checked my apps library and found nothing. However I'm looking at the status while sync is processing, I'm 100% sure that app is not synced to my iTunes library
Yep, I can always manually "transfer purchases" to my iTunes library. But this is not the point. On my old iPhone 4 and new iPad (3rd gen), it will sync all newly installed apps from my iOS devices to my iTunes library, no need to click "Transfer Purchases" again.

Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

Rodilator,
We'll figure this out together! Can you please walk us through the exact steps you're taking to answer a call when it comes in?
SarahO_VZW
Follow us on Twitter @VZWSupport

HT1212 I pod pass code will not open ipod, plus the iopd is in voice mode and it dose not seem to be responding to my voice commands so saying the pass code or trying to type it in will not work to open my ipod , HELP Please

How would one open an ipod if voice command is on but not responding? and the ipod has a opening page creen lock on as well.

I think you have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Using Voice Over to Read Email

Ok, Ok, I know it's a No NO, BUT - I would really like to have my email read from my ipad while driving down the road. Voice Over lets me open email and read headers, etc. but does not allow me to have it auto-read the whole message. Just 1 paragraph at a time. Or am I doing something wrong. Any suggestions on how to do this so I dont crash and burn?
Thanks

Hi gsmed,
Although I don't want you to drive distracted, I do encourage you to do the "Practice VoiceOver Gestures" you can access at the General settings, Accessibility, VoiceOver screen. It allows you to practice the different VoiceOver controls while telling you what they do. You might even want to write them down to learn them.
For example:
Two finger flick up = Read page starting at the top
Two finger flick down = Read page starting at the selected item.
I tested in Mail, and they both read the complete mail.
If you tap to select the first line of the mail, Two Finger Flick Down will start there, re-reading the selected item but continuing to read the whole mail.
Two Finger Flick Up will read the whole screen, including the buttons, mail folders, mail headers and the mail message itself.
Practice single, double, triple taps, one, two, three finger swipes and scrubs, etc.
Also the iPad User Guide has what the gestures are starting at page 108. The iPad User Guide is also available as a free iBook download on the iPad (where the page numbers change depending on your font size).
Now please be safe.
ivan

My phone will not use voice commands to send emails

I cannot dictate text messages and siri cannot answer questions. I can dictate lists for other apps.

Voice commands or Siri? They are two different things.
A search of the forums would have shown several posts in the last few days regarding issues with Siri.

IPod touch Microsoft Sync voice command help

After updating my iPod Touch to iOS5, when I connect my iPod to the Microsoft Sync system in my car, it says "voice commands are not supported with this device." I did not have this problem prior to updating the software. Is there any way to remedy this?

Have you contact the car system manufacturer (Ford I think)? Maybe they have suggestions or maybe there is a firmware update for the car system.
Sometimes this works
Try:
- Reset the car system
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Sometimes an iOS update just breaks compatibility. If that is the casa and assuming you have a 3g iPod, you will have to wait for a firmware update to the car system, By now I would expect a car firmware update is already available it that was the cause.

Hi, I have updated my iPhone 4S with iOS 6 and there is no voice command in maps. Can I get help? Thanks, Sarvari

Hi, I have updated iOS 6 software and there is no voice command on turn by turn navigation in maps. Please help

Check this out:
http://www.apple.com/ios/feature-availability/

Lumia 520 win8.1 voice commands.

After windows 8.1 update.
Voice commands have now moved to the search button and the start button now does nothing. This means I have lost the search function. Is this by design or by accident?
Also to save disturbing my sleep I turn off wifi at night as my emails are not that urgent. Don't want to mute the phone in case an urgent call comes in. It seems that wifi sense overrides and turns wifi back on. What is the quickest way of ensuring silence without going through numerous clicks?

Thanks for the update, SonicBlue. Let's further verify if the issue is SW related or not. Try the following steps and see if the 'call' voice command will work:
1. Reboot the phone. Press and hold the volume down & the power key for 10-15 seconds until it vibrates and restarts. This won't erase any of your files, but you will need to re-set up the date & time settings.
2. Since the phone is already running Lumia Cyan, try checking if the system apps have already been updated as well. Go to Settings > swipe to applications > store > check for updates.
3. Try to use the speech feature using another language pack. This will help verify if the issue is related to the English UK language pack that you're currently using or not. Make sure that the phone's regional settings are correctly set as well. Some commands only work within supported countries. You can check this link for info about the availability of voice commands per country: Feature and service availability - Go to Speech.
Let us know the outcome.

Computer wont recognize voice commands

I have been trying to calibrate my computer for voice commands, even when I am able to say the command examples and get my voice to the green but try for real my computer wont recognize any or most of my commands in any way either by holding a key down or saying a key word before commanding. I have an oklahoma accent but still my accent is not heavy. Any solutions?

In the Speakable Items window, click on the purple circle w/the black "?" mark in the middle. That is a Help button.
If you do not find a solution on the window that opens, make sure you click on the links at the bottom of the window:
*Adapting speech recognition to your environment*
*Using spoken commands to control your computer*
Consider updating your OS to the last Leopard version which I believe is OS 10.5.8. Your current OS is outdated.

E71 - Voice commands / Speech Help / Reading Email...

Similar Messages

Maybe you are looking for