E71: Why does Google Maps not use GPS and track my...

Why is it that Google maps only gives me a GPS signal accurate to 60-2000m. (depending on where I am)
Nokia Maps 2.0 would follow me down roads and footpaths, but Google maps just gives a rough approximation inside a large circle. My friend had an N95 Black and now an N97, and has testified to the exact same problem.
If I could get Google Maps to work with my GPS I would probably delete Nokia Maps, as it is otherwise mostly inferior.
(I've gone through the laborious process to download Maps 3.0 and it is pretty rubbish to be honest - big, bloated with inferior maps)
Message Edited by alexjholland on 24-Aug-2009 05:07 PM

Google Maps can be set to use your GPS if your phone is equipped with it.
Simply run Google Maps...
Options > Tools > Use GPS (check it or uncheck it for on and off, it toggles)
Current version is 3.2.0 which supports layers and Latitude.
The good thing is that it will get a cell tower lock (where supported) first before it establishes a satellite lock so you get a position, albeit approximate, faster. 
You can tell it has established satellite lock when a small box on the top right corner of your app shows you "GPS active (x)" where x = number of satellites locked.
Unfortunately, it does not seem to support the magnetometer on the newer phones yet for compass heading.
Good luck. 
Message Edited by mouserider on 25-Aug-2009 07:53 AM

Similar Messages

  • Why does Google maps not render "Earth view" properly in Firefox, but works fine in other browsers?

    I've been using firefox forever, use it with google maps, mostly with earth view and suddenly, it shows a diagonal mirror image of the map from the bottom right corner to the top left. Google maps in Chrome works fine and maps in Google Earth also work fine.

    We are aware of this issue and will be releasing a Firefox 37.0.2 to correct this within a day or so :)

  • Why does Google chrome not open or crash after installing mountain lion?

    Why does Google chrome not open and/or crash after installing mountain lion?

    Thanks.
    I have the updated chrome (9.0.597.19).
    I have just now tried the recommendation by Zohaib Sharif in teh google gropus link you sent
    http://funbird.co.uk/tech-articals/google-chrome-freezing-and-hanging-problems/
    Hope this works!

  • Why does itunes store not pop up and not tell me why?

    Why does itunes store not pop up and then not tell me why? i"m wondering if it could have anything 2do with me just transefering music with my flash drive?

    Does it show in the Purchased section for downloading ? Click on the Purchased under Quick Links on the right-hand side of the iTunes store homepage.
    If not then have you tried logging out and back into the account ? If that doesn't work either then try contacting iTunes Support :  http://www.apple.com/support/itunes/contact/

  • Why does Google Maps work so horribly on the iPhone??

    Does anybody else get extremely frustrated with Google maps? 9 times out of 10 it takes at least 30 seconds to fully load the map around my area. Showing traffic just doesn't function sometimes. It will stop loading when my map is still grey...the list of glitches goes on and on.
    I had an HTC Droid before my iPhone, and although my iPhone is infinitely better, Google Maps did work flawlessly on my Droid.
    I almost think that it doesn't work well because of the clash with Google and Apple softwares but I really don't know.
    Is this happening to anybody else?

    Bingo -- same finding as BikerBill7.
    For some reason, even though I do not set "country" in any of my Address Book entries on Mac, for some reason when I sync the iPhone Contacts inserts the "United States" into all my domestic contacts' addresses.  Even when I delete the address, re-enter in Address Book, and resync, it still adds the country. (Does not qualify as "syncing" in my opinion...)
    As a result, anytime I use my Contacts to obtain directions the Maps app stalls until I can interrupt and delete the "United States" from the address location bar and route again.

  • Why does Google Search not work with FF14.0.1?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/934886]]</blockquote>
    When I use Google Search, no matter what I type in, this is all that shows up:
    http://i20.photobucket.com/albums/b232/emerald_typhoon/Example1.jpg
    If I use Google Images, the search results and suggestions will show up:
    http://i20.photobucket.com/albums/b232/emerald_typhoon/Example2.jpg
    If I click on Search along the top to go back to search after using Images, the web results will be displayed. I'm not sure what's wrong, as it only does it with Fire Fox. I've checked with other browsers, and Google still works with them. Does anyone have any idea what could be doing this?

    Did you try to clear the Google cookies?
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can also do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Why does Google Chat not work with Firefox v9.0

    When I use Internet Explorer 8.0/7601 Go0gleTalk works fine.
    However, when I use Firefox I get the message that the contact I want to talk to is offline. I can see that they are online in IE8 But, on this computer it does not work. On my Laptop all is well. What can I do please?

    Did you try to clear the Google cookies?
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can also do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Why does my game not use inactive memory

    MacBook Pro
    15-inch, Late 2008
    Processor  2.53 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB
    Lion 10.7.2
    Here is my activity monitor: http://imgur.com/65ca9
    What i'm running:
    TF2 (hl2_osx)
    Steam
    When i'm playing Team Forchrease 2 I get about 80 to 100 Frams/sec(FPS), but the problem is every few seconds it dips down to 10~20 FPS which makes it very jittery. 
    I noticed that while the game is running there is almost no free memory but there is 1GB of ram tied up in "inactive memory" which I thought would be used by anything that needed it.  Now i'm not sure if the game has enough ram and something else is cassing the problem... but I think i have a 1/2 decent graphics card and set up and I don't think I should have this much problems running at the lowest graphics seatting.
    Any insight to this problem of the low FPS and why TF2 only uses 1 GB of memory that would be a great help!  Thanks
    PS
    I saw this guy: https://discussions.apple.com/message/16277771#16277771 but restarting my computer does not resolve this issue.
    Message was edited by: Frankda4

    Hi Frank,
    Frankda4 wrote:
    MacBook Pro
    15-inch, Late 2008
    Processor  2.53 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB
    Lion 10.7.2
    there is 1GB of ram tied up in "inactive memory" which I thought would be used by anything that needed it.
    Not video. You have 256MB VRAM for video, which is rather low for today's video needs. I believe that is the issue.

  • Why does BEA recommend not using JMS-backed webservices?

    Hi,
    I guess the title says it all. In WebLogic 8.1, I noticed a couple of times
    in the docs they say things like:
    " BEA recommends that you implement your Web Service operation with only a
    stateless session EJB or a Java class, and not with a JMS consumer or
    producer. ".
    Yet no explanation is given. Can anybody tell me why BEA doesn't recommend
    them?
    Thanks
    Jon

    Couple of reasons:
    1. JAX-RPC or JSR-109 (J2EE 1.4) do not cover
    JMS queues as backend component.
    2. It is pretty easy to write a java class or SLSB that
    looks up the queue and post data to it.
    3. Queue based web services typically expose one
    method in wsdl: post(Object data). Once the queue
    is wrapped, the service can have explicit contract:
    like sendMeDoc( Foo foo)
    Regards,
    -manoj
    http://manojc.com
    "Jon Mountjoy" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    I guess the title says it all. In WebLogic 8.1, I noticed a couple oftimes
    in the docs they say things like:
    " BEA recommends that you implement your Web Service operation with only a
    stateless session EJB or a Java class, and not with a JMS consumer or
    producer. ".
    Yet no explanation is given. Can anybody tell me why BEA doesn'trecommend
    them?
    Thanks
    Jon

  • Why does iphone 5 not use whole screen viewing for videos also when using iplayer app it only works on iphone 4 screen settings. why can we not have whole screen displaying image.

    I have a iphone 5, I was dissapointed that when watching iplayer the screen settings are same as iphone 4 so end user has no joy enjoying the big screen , I have noticed youtube does the same,

    It hasent been updated to support iphone 5 screen size yet, it will come in time.

  • Why does Photoshop CC Randomly fill leading and tracking after entering a value?

    I've been running into a bug where entering a value into the leading and/or tracking fields in the Character panel generates random numbers. The major problem has come when I'm building banners at large sizes. I enter a value and suddenly I get a min/max warning that I've clearly gone over the maximum value allowed by Photoshop in that field. I press "OK" and another random value is inserted into the field rather than the allowable maximum value, which the warning box promised me it would enter in the field. This generally continues until I force quit Photoshop CC and restart it...hopefully not loosing too much work in the process.
    (I've been burned too many times by Photoshop bugs and issues to know that I should save very frequently...to my desktop.)

    It happens when you have transformed text.
    It's a widely discussed bug, that we've acknowledged and are testing a fix for.

  • Why dose google toolbars not work with ver. 5

    I downloaded the new firefox 5 and it would not let me keep google toolbar

    ''why does google toolbars not work with ver. 5''
    I don't get too much involved with why, but if you really want to Google Toolbar, see
    * https://support.mozilla.com/en-US/questions/837473

  • On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

    On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • Charge overheats if Google Map is used while the phone is being charged.

    I've encountered a strange problem:
    The Charge does NOT overheat when using Google Maps on battery power.
    The Charge does NOT overheat when being charged(either via AC adapter at home or DC adapter in car),
    if Google Maps isn't open.
    When Google Maps is open(GPS on)  and the Charge is being charged, then the phone overheats and
    shuts itself off after a warning message appears.
    Verizon replaced the battery 3 times with brand new Samsung batteries.  The phone was hard reset each time.
    I ended up trying it on the Verizon corporate store's Charge on display. Turns out that the problem can be
    reproduced in store....   Does anyone else have this problem?

    I don't know why this problem has been marked "Solved".  It is not solved.
    I have the same problem when using Google Navigation in the Samsung car dock and the car charger.  I started off with a fully charged battery because posts on other sites have complained that the Charge cannot keep up with the power draw of the Google nav app while using the car charger.  About an hour into my trip, I got a message that the battery was overheating and to unplug the charger which I did.  I then had to contend with the screen going out because it was running on the battery.
    I let the phone discharge to about 70% then tried the car charger again.  Within a few minutes, I got the same overheating message.  It was not an overly hot day and the car A/C was set at 68 degrees.  THIS IS NOT ACCEPTABLE.  I love this phone, but in the 3 days I've owned it, I've had one issue after another.  Dropped Audio to other Verizon customers.  Camera flash causing the phone to reboot.  And now this issue.   I hate to return it, but I'm running out of time.
    Rich

  • HT4623 Why does my IPad not have a Software Updates button in my General tab?

    Why does my IPad not have a Software Updates button in my General tab?

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    To update, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    Your iPad should be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change - though google do have app versions in the store

Maybe you are looking for

  • Acrobat won't play with Windows 7 nicely

    I am running Acrobat 9 Pro on Windows 7 32-bit. I save a pdf then close the pdf.  I do not close the program, just the pdf.  I go to windows explorer and attempt to move the folder that contains the pdf I just closed (as well as a few other files). 

  • Using Wildcard in Parameters

    I have several columns used as parameters but the end users would like to be able to search instead of grabbing the entire column. For instance, there is a number column that has size 10. If the data is 5023495999, then they would like to be able to

  • Mac mini screen showing only black and cursor arrow

    I stopped using this mini when I attempted to upgrade the OS and it became unresponsive in the midst of the upgrade. I recently took it in for repair, they told me it's now running fine. but when I get it home the screen comes up all black. the curso

  • Generating the JSP from the Servlet source file

    Hi, Does anyone out there know if there is any utility/class/program which will generate a JSP from the Servlet Source file (.java file) or indeed from the compiled Servlet file (.class file) If its possible to decompile a .class file into a .java fi

  • Message no. SOLAR_DOC021: The document cannot be displayed

    Hi All, When I am trying to display a document attached to a roadmap, (by double-clicking on it or by clicking the display button) I get the following Error Message: SOLAR_DOC021: "The document cannot be displayed"  As adittional information the road