E71: Windows Live mailbox after update

I've updated my E71 from Ver. 100.... to 200...., and after restoring the phone data, my Windows Live mailbox's icon changed into a white circle with a question mark, it doesn't respond to any action (delete, connect, etc.), it doesn't even appear in mail sittings, and I had create a new live mailbox, so I can't even delete the whole mailbox.
It just stays there, and can't get the notification on active desktop, as the "E-mail 2 notification" is reserved for the first Live account, which stopped working already.

this is not a serious problem.............. what u have to do is some work..........
1) Remove the new windows live installed by you and make a backup of ur device
2) Do a hard reset which will turn ur device as it left the factory totally new which will be '*' '3' 'Call Key' and Power button all pressed at the same time after u have removed ur phone battery for at least 5 mins. It wud turn ur phone as it was when it left the factory.
3) restore
i think it shud work...
cheers
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Similar Messages

HT4623 I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

According to the iTunes download page, it still supports Windows XP.
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 3 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
(Emphasis added)
If your XP computer was updated, then it should work. Again, the links I posted earlier contain the current USB drivers for the iPhone and Windows.

Desk top pc windows 7 ultimate, after update of itunes can not open under my account shows up very light on task bar but opens fine under my wifes account on same computer

Windows 7 ultimate, after update can not open itunes under my account shows up very light on task bar, but opens fine under other accounts on same computer

Hi M0M1!
I have an article for you that seems to describe your issue and can provide some helpful troubleshooting steps for this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Specifically, you will want to focus on this section of the article:
User-specific troubleshooting
If you experience the issue in one particular user account, the suggestions below may resolve the issue. Before proceeding, you'll need to make hidden files and folder visible in Windows using steps 1-5.
Remove iTunes Preference files. Some of the files that iTunes stores settings and preferences in may be unusable. iTunes saves its preferences in two folders. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The locations for the preference folders are:
c:\Users\username\AppData\Local\Apple Computer\iTunes
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
Create a new iTunes Library.
Hold the Shift key while opening iTunes. You'll be asked to choose an iTunes library.
Choose Create Library.
In the following window, select a location to save the new iTunes Library.
Click Save. iTunes will open the new library. After you close iTunes, you can always select the original library by holding the Shift key while opening iTunes.
Recreate your iTunes Library. If your iTunes library has become unusable, rebuilding it may resolve the issue.
Check for issues with content files. Sometimes an audio file can cause iTunes to quit unexpectedly or stop responding when it's analyzing gapless playback information. To determine which file may be causing the issue, follow the steps below:
Quit iTunes.
Navigate to the iTunes folder:
Windows Vista: c:\users\username\Music\iTunes
Windows 7 and Windows 8: c:\users\username\My Music\iTunes
Move the iTunes Library.itl file to your desktop.
Open iTunes. You shouldn't see any content in iTunes.
Choose File > Add Folder to Library.
Navigate to the folder where your music is located:
Windows Vista: c:\users\username\Music\iTunes\iTunes Media
Windows 7 and Windows 8: c:\users\username\My Music\iTunes\iTunes Media
Choose an artist, album, or song to add to the library.
Wait for iTunes to successfully add the item to your library and perform the gapless playback scan.
If successful, continue adding songs to your library.
If there is an issue with one of your files, you'll notice your issue reappear after you add it to the library. You should repeat these steps, being careful not to add the files that caused the issue.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Songs don't show up in Windows Live Messenger after itunes 7.0.1 update

The topic line pretty much says it all. I've checked the settings in Messenger. I'm not sure the songs are supposed to show up in Messenger from itunes, but they always have and I like that feature.
Since updating itunes from 7.0 to 7.0.1 this feature doesn't work. I wonder why apple doesn't test their stuff before releasing it anymore. They're getting as bad as Microsoft anymore, which is a shame. I'm referring mainly to the larger problems with itunes 7 rather than my petty problem here.
Any help would be appreciated though. Thanks.

I had the same problem!!!!
in windows live messenger (msn 8.0) go 2 tool>options & make sure the show song information from WINDOWS MEDIA PLAYER as a personal messeger box is ticked!
then sign out of the messenger, close it & itunes, then open up windows live messenger, sign in, then open itunes @ start playing ur songs!
this worked for me. hope it works for u.
good luck!

Firefox not working on Windows 8.1 after update to 32.0

For the last three versions 30.0, 31.0, and 32.0 Firefox will not work after updating on my Windows 8.1 laptop. I have tried resetting Firefox to default state, uninstalling and reinstalling, and resetting my TCP/IP stack (which usually fixes the problem). I also have gone to Internet Options in IE 11 and unchecked the automatically detect settings under the LAN connection options and then rechecked it without success. I also have Chrome installed on my machine as a check to see if it lies within the browser or my internet connection.
Internet Explorer 11 is the only browser that works so something seems to be amiss in Firefox.

Hello kschmit05, any luck in you boot the computer in [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows Safe mode with network support], select in the Startup Settings screen > Enable Safe Mode with Networking.
thank you

ITunes error 7 (windows error 126) after updating

After updating itunes last night (I put it off for a while), I recieved the message "iTunes helper was not installed correctly. iTunes error 7". So i tried to reinstall, and recieved the same message. After uninstalling everything related to itunes from my computer, and redownloading and installing itunes 11.2.2 for windows 64 bit, I recieved the same message.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

E71 + Windows Live Messenger server settings

Hi all,
Any idea what the server settings are for Messenger/IM?
ie.
Under IM -> Settings -> Servers:
There is a field that asks for "web address". What should the input for this be?
Thanks in advance!

The Symbian S60 version of Windows Live Messenger from "Download!" rather cheeky charges you £1.50 (GBP) per month or the equivalent in your local currency, after a trial and as I recall is billed via premium rated SMS messages.
Its not free, and changing your handset may not help to bag some extra fee months. The service appears to be locked to your telephone number.
I personally would like it to be free, the fact that you mainly have to use data to talk to your IM contacts, means you have to pay twice.
Note to those who decided to charge: I'll refrain from using it until you make the S60 version always free.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

E71 Doesn't work after update

Today after updating my Nokia E71 firmware using Nokia OviSuite ,a message appeared in the third step that the update is successfully complete and my Nokia E71 will restart and if not try to move the battery and reinstall it again
but after I did everything the phone still not working
when I try to turn it on small vibration and flashing happened and close again
please help me

Hi Berclaz74,
If you are having issues with your Thunderbolt external monitor after a software update, you may want to try the troubleshooting in the following article, in particular the step about resetting the PRAM and SMC.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
- Brenden

TS3899 Saved messages disappear from mailboxes after 'update'.

Saved messages often disappear from mailboxes after an automatic 'update'. Why does that occur? If it's normal, how long are messages retained in a mailbox? Thanks

Hi Milli,
I think the problem is that Mail tries to download them in order & if it runs into one it can't it just stops, happens when a bad/malformed email is in the chain too.
I think this may have cleared your problem though...
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

E71 Windows Live Messenger

Does anyone know if it is possible to have your Windows Live Messenger emails automatically retrieved instead of having to manually syncronise them?
Thanks

Is your password saved? or are you putting your password every time you connect it? I didn't select the remember password option so I put the password every time I've to sync, I don't seem if there is an option for making it automatic, may be it works if we save the password.
Best Regards,
Faisal Mohammad

My camera, settings application and I.E application don't work on windows 8.1 after update

After the last update on windows 8.1 Metro Apps don't start. I click on them, there is some animation showing the live tile expanding, then the app closes.
This happens with every Metro App. how can I fix that? I tried everything and it's in vain!

> Is there any compatibility issue? What could be the problem?
Can you run your script manually? Did you set EnableLinkedConnections=1?
And are you aware that in 8.1, logon scripts by default run with a 5
minutes delay? :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Windows Partition gone after updating to Yosemite

Hello I have recently updated to Yosemite and was unaware of the bug that causes the partitions to disappear.
I have read threads and the steps are way too difficult to understand and all i see is coding and other things.
If anyone could help please (step by step) in a simple way.
Windows 7 Partition shows up as disk0s4.
Macbook Pro 13' in 2012.
Have downloaded TestDisk but have no knowledge in how to use it.

And I have a couple of questions to the steps below:
1. Delete the old entry and create a new entry at GPT#4. (Is this step done in testdisk? If it is, what are the steps to get to this step?)
sudo gdisk /dev/disk0
p
d
4
n
4
86923264
538218489
0700
p
w
y
2. You will need to reboot after the change, because the disk you are booted from is the one being modified. Reboot will rebuild disk0s4 using the start/end you entered.
3. Run the dd command - sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C and check that the first line contains "R.NTFS". (Done in testdisk?)
4. This is a tedious process and you want to check after the second 'p'rint command that it looks reasonable, before the 'w'rite and 'y'es to confirm. (Testdisk?)
5. Once you a working GPT#4, a new hybrid MBR needs to be created which will overwrite what you see in your Fdisk output. This is also done using GPT Fdisk (Gdisk). (Download link to Gdisk?)
6. a. Test 1 - Can you see your Bootcamp volume in Finder.
    b. Test 2 - Can you files in the Bootcamp volume?
    c. Test 3 - Can you see Bootcamp in your System Preferences -> Startup Disk.
    d. Test 4 - If Test 1-3 are successful, select Bootcamp and click on Restart. You may need Windows startup repair, if you see a hanging underline cursor at the top left corner of your screen. In most cases, it is not required.

Cannot boot to Windows 8.1 after updating to Yosemite

I am using a MacBook Pro (Retina 13-inch Late 2013) computer, and mainly use Windows 8.1 via bootcamp on it for work. I have just updated OS X Maverick to OS X Yosemite 10.10, and now when booting and holding option, the Windows and Backup partition no longer show.
I have read a few threads on here with similar problems, and I believe that I understand the crux of the problem, but I am having difficulties actually using TestDisk as I'm not exactly sure what options to use and what to look for.
Below is a screenshot of my Disk Utility:
And here is the output of TestDisk so far (I analyzed the disk0):
It looks like the Bootcamp partition is still there, but I'm not sure what steps to take next -- any help would be most appreciated!

The deep search finally finished:
And here's the text version:
MS Data                338695552 651468152 312772601
   MS Data                340391264 653163864 312772601
   MS Data                490233848 803006448 312772601
   MS Data                490233855 803006455 312772601
   Mac HFS                490234708 491504243    1269536
And after continue:
And text:
Disk /dev/rdisk0 - 251 GB / 233 GiB - 490234752 sectors (RO)
     Partition               Start        End    Size in sectors
>D EFI System                    40     409639     409600 [EFI]
D EFI System                    46     409645     409600 [EFI]
D MS Data                 12844161 247217280 234373120
D MS Data                 25922952 338695552 312772601
D MS Data                 27618664 340391264 312772601
D Mac HFS                 97104348 235516637 138412290
D Mac HFS                 97154892 235567181 138412290
D Mac HFS                174921356 176190891    1269536
D Mac HFS                174921727 176191262    1269536
D Mac HFS                174921894 176191429    1269536
D Mac HFS                174922198 176191733    1269536
D Mac HFS                174922470 176192005    1269536
Structure: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:

IE is not showing on windows server 2008 after updates

Hi,
I have installed Window server 2008 R2.
After installing i found IE 8 on the server, but after 1day it automatically updated some softwares and now IE is not showing on my system.
i.e IE uninstalled after the updates to the windows server.
Please can some one help me to get the IE. I tried installing IE8, IE9 after downloading but it is showing "Internet Explorer 8 is not supported on this operating system"
Regards
Krishna

Hi,
Internet Explorer 8 runs on any of the following operating systems:
Windows Vista, 32-bit versions
Windows Vista, 64-bit versions
Windows Vista with Service Pack 1 (SP 1) or a later version
Windows XP, 32-bit versions with Service Pack 2 (SP2) or a later version
Windows XP Professional, 64-bit Edition
Windows Server 2003, 32-bit versions with Service Pack 2 (SP2) or a later version
Windows Server 2003, 64-bit versions with Service Pack 2 (SP2) or a later version
Windows Server 2008, 32-bit, or a later version
Windows Server 2008, 64-bit, or a later version
Please expand the below path to check whether IE is there:
C:\Program Files\Internet Explorer
Regards,
Yan Li
Regards, Yan Li

How to create recovery disk for windows 8.1 after update from windows 8.

My laptop came with windows 8 and i have recovery discs for windows 8.
Now i've updated to windows 8.1, so i want to creat recovery discs for windows 8.1.
So in future when i use recovery discs i dont have to download windows 8.1 again.
Please tell me if there is any way to do this.....

As colakid posted, in Windows 8 the ability to create a recovery CD/DVD has gone. Your options are to:
create a recovery USB; or
create a recovery image.
Recovery USB
Colakid's post talks you through how to make a recovery USB: from control panel, choose Recovery, then Create a Recovery Drive, and follow the prompts.
However, the 'recovery USB' can be a bit misleading. When the wizard starts, there is an option to 'copy the recovery partition from the PC to the recovery drive'. If you do not check this option, you will still need installation media to reset your PC.
Since you have upgraded from Windows 8 to Windows 8.1, you will probably not be able to check this option, as it will be greyed out (like it is in the picture in Colakid's post).
If you go ahead and create the USB anyway, you will be able to boot to it, but you won't be able to reinstall Windows unless you have the installation media (or possibly a system image, though I haven't tried that).
Recovery image
The recovery image is an image of your computer that Windows will use when you select the 'refresh my pc' option. You can create a recovery image using the recimg.exe tool.
First, open an elevated command prompt (type cmd and press Ctrl + Shift + Enter).
Next, create the recovery image by typing:
recimg /createimage [path]
Where [path] is the folder you want the image in, eg C:\Recovery. You cannot set the file name - it will always be called CustomRefresh.wim.
Let it run its course. When it's done, you can check that it is the current recovery image by typing
recimg /showcurrent
It's important to keep in mind what a recovery image contains. It will have your Windows system files (in their current state), and the desktop apps you have installed (so it makes sense to do this after a fresh install of Windows). It will
not backup any Metro apps or user files, because these are not deleted during a system refresh. If you want a complete backup of everything on your computer the way it is now, you should make take a complete system image (which
can be done from the File History settings in control panel - at the bottom left there will be a 'System Backup Image' option - or you can do it using any other backup software like Ghost or Acronis).
In my case, I created the recover image straight after upgrading to Windows and it was about 6 GB.
Prepare/Create and register an recovery partition, so the option Copy the Recovery Partition becomes available in the recovery drive UI application.
In elevated command run> RECIMG -CREATEIMAGE C:\REFRESHIMAGE<
This will create a new custom.wim in a folder Refreshimage.
Now lets get ready to register the path of the image, so our create recovery drive option(COPY THE RECOVERY PARTITION FROM THE PC TO THE RECOVERY DRIVE) becomes available.
> In the folder you created there will be a> custom.wim<
change it to>INSTALL.wim<
> Create a folder In Cd/directory using Elevated command> mkdir c:\Win8.1-Recovery,>
Win81-Recovery<.
> Copy the INSTALL.WIM. Put in the Win81-recovery folder created.
> Run in elevated commad>REAGENTC /SetOSImage /Path C:\Win81-Recovery\INSTALL.WIM /Index 1<
Do not copy the arrows if using copy and paste, that is my way of pointing out lines of code
Information provided by the link below, thanks Keith. I simplified the process for easy following and added my own tweak from trial and error for the install.
blogs.technet.com/b/keithmayer/a···ive.aspx

E71: Windows Live mailbox after update

Similar Messages

Maybe you are looking for