E71 Wireless Data Connection

Hi, does anyone know the setup details for a wireless data connection for the E71 on the O2 network.
I would like to pair my E71 to my TomTom GO 530. The E71 is currently unsupported by the Go 53o but you have the option to pair other phones. I need the O2 access point details, username, password and DNS settings.
TomTom give default settings on their support pages but these do not work on my phone/TomTom GO 530.
Any advice would be welcome.

B.
Thanks for your reply as it provides some helpful ideas and confirms that my issue is not totally unique.  However you are describe an isssue with wifi where as I do not seem to have the problem there.  My home wifi network connection seems stable.  I encounter the problem whith my phone companies wireless data connection.  More interestingly (although I need to do more testing to be absolutely certain) is that it appears that when I loose my abilityt to receive data I do NOT loose voice capability.
As a specific example.  I am surfing the internet in front of my house (not on my home network however) and get in the car to drive ten blocks to the grocery store.  I get there and can't remember the groceries I was to buy so I attempt to check the recipe on-line but can get no connection to surf.  I can however call home to ask or (to save a lecture) I could also turn airplane mode on and off and that would re-establish my data connection to my phone company.
It feels like if I could do what you have done for your home connection - only on at a provder level - all would be good. 
Thanks for your help.
scott

Similar Messages

  • E71 Wireless AP connection problem

    i am so confused ,  my E71 can connect to any AP except my home AP,  my friend has the same E71, he did exactly what i did , and he connected normally to the internet.
     for me when i connect to my AP , and i go to connectivity > connection manager > active data connections  i cant see any SSID , but my friend can.
     where did i mess up ..... any help is appreciated  
     Thx in advance
    Regards
    HK

    From a free spot download this free application:
    http://www.wefi.com/download/client/WeFi.sis
    The instructions to download will appear on your screen.
    Then go home, hit the menu key (top left), click on "installations" and click on Wefi.
    On the top you will see two tabs, Status and Spots.
    Using the joystick go the spots tab and see whether you can see the id of your net.If not, I'll tell you what to do.

  • E71 hanging Data connection after automatic email ...

    Hello all,
    My E71 seems to suffer from hanging Data Packet Connection after automatic email retreival.
    So I configured my email IMAP4 retreival and set it to automatic retreival every 15 minutes.
    Then after a few hours I check my phone and there is a data connection open and active. If I check the connections it is open for a few hours, sucking my battery.
    What should I do to make it automatically disconnect after email retreival?
    PS: I configured my packet data settings with "Data Packet connection only when needed"
    Regards,
    Menno

    I found the only solution is to set the frequency of update to more than 30 minutes. This really is a problem since the next interval is 2 hours, not 1 hour like in other nokia devices. I don't believe that my nokia N series had this problem, either.
    This is a SIGNIFICANT issue that needs to be fixed by nokia considering they want the e71 to be messaging/email device. It is very annoying to have to be prompted to close the data packet connection to do anything; i.e. make calls, use google maps, etc. Checking e-mails only once every 2 hours is obviously not a solution either.
    Get on the ball nokia!

  • E71 disable data connections on roaming

    is there a system setting or recommended application to disable data connections in roaming?
    on my other phone running android there is a switch on the menu and on top of that there is a switch app which disconnects connections and changes apn to prevent reconnecting.
    I'm looking for similar solution for nokia e71... thanks!

    i know about that but I do not want to be going to every application and making sure that it is configured not to use data...
    I want global system setting which cuts out internet connection.
    On android there is a nice program called apndroid which changes apn url temporarily and reverts back to original when you run it again. 
    I'm not familiar with programming on symbian but is there API access to apn settings so it could be changed by a script or software?

  • E71 Wireless internet connection issue

    I would be appreciated if someone could assist me with the following problem:
    When I try to connect to internet through my home wireless router, phone relalizes it but when I try to go to a website, it says the following:
    "Unable to connect, invalid WPA pre-shared key"
    What does this mean?
    Thanks,
    Edwin

    Hi I had this problem with my E51.  I bought the phone and the first WLAN I tried to connect it to, fooling around, was in a public place, turned out to be password protected, I didn't want to pay so I bailed and didn't connect.
    The next time was in my guest house where I had already connected my PC so I figured it would be a no-brainer - as it was with my PC.
    Well. Not so.  I kept thinking - is the WPA pre-auth key something different from what Vista wanted? Or what???
    Then eventually I googled "invalid WPA pre-authorized key" in Nokia support.  Blah blah blah but no solutions.
    Out of desperation I dug down into all the settings menus I could find and eventually blundered into
    Menu > Tools > Settings > Connection > Access points
    which had squirrelled away an access point for each time I had ever tried to connect!
    Well that can't be good I thought, and I deleted them all - which took a while.
    Then I tried to connect again and voila I got the browser up and running!
    I think that's what did it, but, I did change some other stuff that may have had something to do with it - who knows.
    I changed a browser setting:
    Menu > Web > Options > Settings > Genera > Access point
    to "Always ask"
    And I changed:
    Menu > Tools > Settings > Connection >  Wireless LAN > Options > Advanced Settings > Yes > Power saving >
    to 'Disabled'.
    Good luck - I will be interested to hear if this helps you or, if you try it and it doesn't.
    Momsahib

  • E71 Firmware Upgrage (200...) data connection / Ma...

    Since upgrading the firmware on my E71 the data connection using either 3G or GPRS has become very unstable. This has made syncing Mail for Exchange a nightmare! Took 3 hours for it to update all the contacts, (there was 615 of them), and when in 'always on' mode it's continually dropping the connection.
    Have tried reinstalling both the firmware and MfE, and has made no difference to the stability. Running MfE 2.7.0.
    When going into the 'Download' folder it's also dropping the data connection which means the information has not yet been able to update.
    Anyone else with the same problem?

    OK, here it is -
     - All Internet connections working fine before update (3G/Wifi) 
    - Used NSS - flashed E71 to generic Euro version so i can get update ver.400.21.013,instead of ver. 300.21.012
    -  Successful, All Internet connections working fine after NSS flashinge (3G/Wifi)
    - Started up NSU to begin update. Update done successfully
    - Internet connections NOT working anymore(3G/Wifi)
    - Redid update, and restore without "Settings", PC hung, update not sompleted, Phone refused to start.
    - Did 3 fingered trick, phone back to life.
    - Redid update with NSU - Completed successsfuly
    - Did restore - minus Settings
    - 3G and Wifi not working
    - Did reset  *#7780#  , and did restore again - minus settings/memory card. Still no joy
    - Did reset *#7370# and restore minus settings/memeory card. Still not working
    - Did reset (three fingered trick) and restore minus settings/memory card.
    - Somewhere along the way, GPRS/3G working, but not Wifi.
    - Initially getting  "gateway not found", now "Wlan not found" errors msg
    - Formated card, wiped phone memory clean, deleted all apps
    - Tried ALL permutations of resets, without restore - Still not working
    - Tried ALL permutations of resets, without restore - minus Sim and Memory card - Still not working
    - Tried to re-do update with NSU. NSU says i have the most recent update, no further options
    - Changed WLAN to "No security", used WLAN wizard - Still not working
    - Changed WLAN to "No security", entered settings manually - Still not working
    I have reset this phone in alll the diff reste permutations and entered the HEX key over 50 times now, and its still not working. Every other device is connected apart from the E71!!

  • Packet Data connection and Wireless Connection at ...

    I use Nokia for Exchange to push my mail this from 06Hr00 until 22Hr00 on a Nokia N82 latest firmware (same problem on the first firmware)
    When this connection is open i'm not able for example surf the internet through a wireless acces point at the same time. If a disconnect the packet data connecting everythings works fine.
    The error message i receive is "Web: No gateway reply"
    Is it possible to have to different kinds of data connection open??
    Message Edited by gip9190 on 26-Jan-2008 07:43 AM

    You are welcome. I hope it will help you make the right decision. We are looking forward to welcome you in the world of S60v3 smartphones

  • E71 Data Connection Never Drops to On-Hold

    Morning all,
    I've just changed from an N95 to E71 and have a funny problem which I noticed while using mail for exchange.  
    When the peak profile in mail for exchange is set to always on obviously it holds the data connection open for the e-mail push to work.  When using mail for exchange like this on the N95 if I was to get a call the data connection would pause, my phone would ring, and then the data would resume.  With my new E71 it doesn't pause the data connection and drops the call straight to voicemail.
    Is there anything I can do to make my E71 behave like my N95 did or am I stuck retrieving e-mails after a time duration?
    Thanks in advance for any help,
    Will

    Hmmm it could be bad hardware, it might be worth trying it in a known area of good coverage.
    The other thing you could do is possibly check that your APN etc in the Packet Data Settings is correct.
    You might have a mis configured setting thats causing it to fail.
    https://nokiags.wdsglobal.com/standard?siteLanguageId=118
    That page, allows you to resend your network settings to your phone.
    Its a pretty easy wizard process to send them to your phone.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

    I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

    Yes, you can.
    This is a special feature of the AirPort Express 802.11n.  You will have to set it up "manually" to "enable Ethernet clients".
    If  your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
    If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

  • HP wireless TV connect no longer working after Win 8.1 "upgrade"

    Help, my transmitter will not link to the box now that I have upgraded from Windows 8 to Windows8.1.
    When first plugged in, the Trans light blinks 5 times fast, then no lights.  The receiver continually blinks slower and when the trans button is held, the lights both blink at the same speed, but will not link.
    I removed and tried to "add new video source" but the "Please activate registration on transmitter unit" pops up and when attempting to push button, the two won't sync...
    I looked for the HP trans in the devices but could not find it.  I check the HDMI card (disabled and enabled) to no avail...
    Are there firmware patches for this device.  I need help ASAP as I need this functionality for work, but I had to have the upgrade for work as well...
    I am getting a "tone" when the receiver fails from the laptop speakers

    PROBLEM SOLVED ON ENVY 17 INTEL QUAD: Using Windows 8.1 with HP Wireless TV connect NOT linking issues.  I had the total 8.1 installed 4/12/2014 and even at this late a date, not all the wireless drivers were updated to their latest rev.  HP Support has a set of Intel driver updates and downloades; just select the ones you need, save and update.  With the update to all the associated applications, I believe there were 3 of them for my computer, I am now working well.  I am under warranty with my unit so I was fortunate to have, Likshima, a second level supervisor at HP who took the time to research this problem and find the solution, personally correct my issues!  Hope this helps because to my comprehension, an update is by far the safest solution!!!

  • I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

    I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print.  What is AirPrint & how do I connect to it?

    Patti-
    Is your Epson printer on Apple's list of AirPrint capable printers?  See <http://support.apple.com/kb/ht4356>.
    If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint.  Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
    One other possibility is that there could be a print job stuck in the iPad's print queue.  Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen.  Scroll across and see if the Print Center is there.
    Fred

  • Kit Kat data connection problems

    Since updating to kitkat (among other problems) my data connection drops to 3G almost everywhere, and sometimes unexpectedly disappears completely. I used to have 4G everywhere most places and always in the two zip codes I primarily use the phone from. 02113 and 01970. Anyone know how to fix? Is this just one of the things they need to correct in the next kit kat update? Thanks.

    I've had this issue for months.  I've done everything Verizon suggested, including new sims, factory reset, toggling Airplane mode, LTE on/off, radio on/off, reboots, *#*#4636etc., and more.  Nothing helps.  My phone still intermittently loses the 4g connection.  They haven't suggested trying a new (not new; reconditioned), but I don't want to go that route; I know others who have gotten a replacement, and it hasn't helped.  
    It isn't fixed in the upcoming update according to developers forums.
    Some think it's due to Verizon's network; others believe it's an inherent problem in the 4g chipsets in these first generation LTE phones.  I don't believe Verizon knows what's going on; they're just hoping the issue's fixed in the next gen phones, and the problem will go away.  Of course the problem with that is that some of their customers who are stuck with these phones will also go away at the end of our contracts, especially if another wireless company manages to come out with a RELIABLE high-speed 4g network.

  • Using iphone as a wireless router connected to imac??

    Silly question here, Okay is there a way to use the AT&T Edge network, via my iphone as my conduit to the internet, Yeah, i know its slow, but if I cancelled my DSL, that would pay for my monthly plan. In other words Plugging in my iphone to my imac not to sync, but as a satelite- Wifi internet receiver????

    Copied from this link under
    WIRELESS DATA SERVICE TERMS AND CONDITIONS
    I. GENERAL TERMS AND CONDITIONS APPLICABLE TO AT&T DATA SERVICES, INCLUDING BUT NOT LIMITED TO, FEATURES THAT MAY BE USED WITH DATA SERVICES AND WIRELESS CONTENT.
    http://www.wireless.att.com/learn/articles-resources/iphone-terms.jsp
    +EXCEPT FOR CONTENT FORMATTED IN ACCORDANCE WITH AT&T'S CONTENT STANDARDS, UNLIMITED PLANS CANNOT BE USED FOR UPLOADING, DOWNLOADING OR STREAMING OF VIDEO CONTENT (E.G. MOVIES, TV), MUSIC OR GAMES. *FURTHERMORE, UNLIMITED PLANS (EXCEPT FOR DATACONNECT AND BLACKBERRY TETHERED) CANNOT BE USED FOR ANY APPLICATIONS THAT TETHER THE DEVICE (THROUGH USE OF, INCLUDING WITHOUT LIMITATION, CONNECTION KITS, OTHER PHONE/PDA-TO-COMPUTER ACCESSORIES, BLUETOOTH OR ANY OTHER WIRELESS TECHNOLOGY) TO LAPTOPS, PCS, OR OTHER EQUIPMENT FOR ANY PURPOSE.* Service is not intended to provide full-time connections, and the Service may be discontinued after a significant period of inactivity or after sessions of excessive usage. AT&T reserves the right to limit throughput or amount of data transferred, deny Service and/or terminate Service, without notice, to anyone it believes is using the Service in any manner prohibited above or whose usage adversely impacts its network or service levels or hinders access to its network and (ii) protect its network from harm, which may impact legitimate data flows.+

  • Please, help me to set up wireless Internet connection. M...

             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?

    Pensive wrote:
             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?
    hi pensive ,
     Seems interesting , first do this -  push the reset button on the back of router .
    push it till 30 seconds , unplug the power cable and plug in the power cable back in After completion of 30 seconds.
    then try to log into , 192.168.1.1 again . with the password "admin".
    see if it reply?
    Else -
    strt>cmd>ipconfig /all - post the result ?
    pe@c3
    Message Edited by meteor on 01-09-2008 05:58 AM
    ~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

  • Internet Data Connection Screwy on 701

    My Mobile Data connection only works IF i'm using an app that prompts me asking which connection I want to use. The default web browser, Opera Mini and Opera Mobile all give you that option so those appear to work ok. 
    But, Nokia Maps, Public Transport, Weather, Internet Radio, Nokia Store, etc. all will not work. I can sometimes get them to work if I open an app that prompts for web connection (such as the default web browser), then leaving that app open and launching one of the non-working apps so it kind of piggybacks off the initial connection.
    The problem is only with the data connection, wifi works fine.
    Am I missing a setting somewhere on my 701? This problem is driving me nuts.

    I think I can tough it out till September, so I'll just learn to live with the flaky data connection till then. But if FP2 doesn't fix it, I guess I'll need to say goodbye to the 701 and probably Nokia's in general (don't like Windows Phone OS...too closed off for my taste). 
    I'm not sure what problem you experienced on wifi, but I can tell you I had wifi problems after the FP1 update. The 701 doesn't play nicely with some routers. On the one's that are giving you a problem, try this:
    Admin setup page of router (mine is a Linksys WRT54GS). Once there, I enabled "Wireless QoS" and "WMM Support". After that, I had no problems using my home and office wifi. Good luck to you.

Maybe you are looking for

  • The installation was interrupted before itunes could be completely installe

    "The installation was interrupted before itunes could be completely installed." I am getting this error when I try to install itunes or ipod updater form either the downloaded copies or the CD. I absolutely can't get either installation to finish. I

  • How to see the image from server

    hi, I have uploaded an image to server using following code. I want to see the image from server now. When i open this page then it show image. But when i want to see this image from server then it shows blank. Whats the problem of my code? Give me s

  • Making LOV off of an exposed method from second application module

    Hello, I am on JDev 11.1.1.4.0. My ADF project worked fine until the spec changed on how Lookups are going to be handled. Previuosly, all the lookup tables were in the same database as other tables. Change is that FND Lookups will be created in the "

  • Unable to confirm quantity

    Hi ALL, I Have a sales order for 100 line items, and have stock also against same order ( it is MTO),but in the sales order --schedule lines confirmed quantity is showing as zero. I carry out Re ATP check also, at this time confirmed quantity is show

  • Popup 'AFP Connection status'

    A couple of weeks ago I set-up my MacBook as a kind of file server. I created some sharepoints for my iMac and the two Windows PC's (sorry) of my children allowing all systems to share files but also to have private shares on the server. Everything w