E71 with Nokia Messaging but not pushmail.

Hello
excuse me but i'm french and my english is medium.
So, i have a E71 and i installed since 1 month a soft of messaging with a real push mail (a beta version).
But i delete involuntarily the soft and i don't remenber this name.
And today i downloaded and installed Nokia Messaging.
Apparently, this soft is not a push mail. I can only adjust the synchronization that all the 30min.Is it normal?
And the presentation to the screen is different than on the Nokia web.
thank you for your answers.
roro

Thank you
But i think Nokia Messaging bad installed because i have not this set. I have only "intervalle connexion" 6h, 4h, 2h 1h and 30min.
Often i had the possibility to modify this setting but here, it is different. ??????
I have the sensation to have the simple version of the e-mail of Nokia.
It is bizarre but in Menu, Installations, i have 2 icons @.
one icon @ Config.Mess and one icon @ Email.
When i press on the first one, i have access to the creation for a new adress mail.
When i press on @ Email, there is nothing.
there is a problem, no?
bye

Similar Messages

[E71-1] Nokia messaging not sync even after firmwa...

Hi all,
For the past 3 months, my Nokia messaging is not SYNC automatically again from my Nokia E71-1.
Yesterday I tried to firmware upgrade my E71-1 (to latest firmware ver 410.21.010); and install Nokia Messaging from OVI store.
And then after 1st sync, all my emails coming back up (which is great); but then I have to sync manually to get the latest email.
Currently I have 5 emails account inside my Nokia messaging account (they are 2xGmail, Yahoo and other 2 from my local ISP).
Plan: Nokia Messaging - operator subscriber
Subscription status Active
My server settings:
- Server name: netac5.vie.hosting.no... (unable to read the rest text)
- Send and Receive: Soonest (I've changed to "every 15 minutes"; still the email not sync'ed automatically)
Is this issue because I have 5 email accounts checked by my Nokia Messaging?
Thanks

I found a solution that works for my E71-1 (client 9.7.0.2). It's quite simple: In the Option menu of your Nokai email application - that is where you can see the buttons for all email accounts plus the SYNC button etc. - you should see an 'go online' or 'go offline' command (in German 'online gehen' or 'offline gehe'. After toggling this command from 'go online' to 'go offline' which will turn you on line, you can see the sync icon in the header line to go PERMANENTLY to sync status. It will sync every minute or so depending on your settings.
I can't believe it, that this is the solution after all the time I spent looking for it.

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?

Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport

E71 Imap, can send but not receive

HI all
I received my E71 about a week ago and having major problems configuring it with my work email.
Its an IMAP mail. I can send fine but on most occasions cannot receive. Occasionally it downloads some mails but only twice in the last week. I think this shows the settings are correct.
Have tried to sign up with Nokia mail but get the following error message:
'Unable to connect with the information provided. Please try again.'
My colleagues in the UK use Blackberrys fine and have spoken with IT and they cannot think of any reason why this is happening. I have deleted the mailbox and set it up again many times but still can send but not receive...
Very grateful for any advice as really happy with the phone other than this which is the main reason why I bought it.
Shane

Hi Anne,
Is this IMAP or POP account?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

Problem with Nokia Messaging on my N97 (V22)

Since afew weeks I have a strange problem with Nokia Messaging on my N97.
I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?

millic wrote:
ceroberts75, I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
absolutely m8. thats why i gave you a kudos.
the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him! lmao.
another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
i hope it works for him and others as i kno9w thesome that are just giving up on it.

What went wrong with Nokia Messaging?

What went wrong with Nokia Messaging?
In the beginning of this year I used Nokia Messaging on E71 and I really loved it!
Since this autumn I am using it on my new N97 and I am confronted with totally different experience:
- the application is very slooooow..
- its unreliable - very ofter emails arrive with hours delay, a sync may take up to minutes
- its very very buggy - truncated icons, diplay randomly jumping up and down, when scrolling.
- very bad HTML display of emails - tiny (unreadable) default font and no wrap to screen when zooming - I thought emails were for reading?
- many, many usability issues
I just cannot believe it - How has Nokia managed to convert once such a good piece of software into such incredible disaster?
Recently an update was published - I tried it immediately... To my big disappointment it contains all the same bugs and introduces new ones..
How is this possible? What is happening at Nokia?

Also my N86 as the same problem.
And in global setting Nokia deleted the option to read always in HTML.
And there is not any option to write html Mails

Trying to install Nokia Messaging but keeps coming...

Im trying to install the new Nokia Messaging on a brand new E63 with firmware 200.21.012.
I register in the web page for Nokia Messaging but the SMS with the download link never comes, so when I try to download it from my mobile browser, it installs a Email and Email setup application but when I run them, its the regular Nokia Email and not the new Nokia Messaging.
Anybody seen this before? know how to fix it?
Thanks in advance,
Dan

Hi,
You can download the Nokia Messaging application directly from handsets web browser. Go to Web, enter email.nokia.com. You will find a link to download the application to the handset. Open the link & download the application.
"If this post helped you solve your query, please do click the KUDOS tab."

E75 reports (no messages) with Nokia Messaging Gma...

I signed up for an account a http://email.nokia.com, went through the processed, and received the installation message fine on my phone. The account appeared to have set up correctly. I entered my email, accessed the account, it asked me for my password, I entered it, and it connected without reporting an error. However, after connecting, the account reported (no messages) when there are actually several messages in my inbox all newer than 3 days. I can access the account fine if I set it up using the phone's built in software, but I would really like to utilize push email. Does anyone have any suggestions as to what could be causing this issue?

Here's the deal. Like many of you, I have faced the exact same problems with Nokia Messaging on the E75. You can send emails but cannot receive them. The phone, the connection and the synchronization seems all fine with the green ring attempting to fetch from nokia servers but resulting in zero emails.
Well, I have more or less narrowed down the cause of the problem if by chance you have not noticed it is none other then - NOKIA MESSAGING!!!!
When ever you sign-up for a new account it is set up in one of many Nokia servers. Mine is "netac12.vie.hosting.nokia.com" you can find the server info on your phone. It could be that these new servers are not configured properly to work with some of our phones in particular, the E75. Other possibilities may be that the integrated Nokia Messaging software in the phone may be having some problems in communicating with the nokia server. Which ever way you look it just comes down to software problems.
As of now, I don't believe Nokia has a solution but am sure they are aware of the situation. As much as Nokia may not acknowledge certain problems with its products or services but trust me they are aware... or maybe just giving a "blind eye" so to speak for the time being..
One may ask how sure I am if it is not the hardware of the phone or my WiFi/GPRS connection that is at fault and with that, I ask of you to try the following experiment.
Download emoze (www.emoze.com) on to your phone to be 100% sure that your phone and connection is in good working order. It is a freeware Push eMail service with certain limitations of course. You may choose to remove it completely, if you don't like it but for the benefit of the test and also that it is FREE just bare with its dry interface.
After when you have installed emoze onto your phone you will realize.. SUDDENLY.. you are able to send and receive YES, RECEIVE emails almost instantaneously! To be sure that Nokia Messaging is indeed running foul I let both emoze and Nokia Messaging run on my phone in the background and send myself an email via my PC. Emoze as clockwork, without fail, gets me the email within a minute - most of the time within 15 seconds. Whereas, Nokia Messaging, as I may add, is a very moody service. It will choose when to deliver if at all and when not to at its own BLOODY will !!!
Please excuse my language, just like many of you I am very disappointed and that to have call Nokia Care Line on several occasions and only to be told that no one else seems to be facing this problem and they make me go through the damn settings over-and-over again. If there is a fault, please rectify and not hide behind your virtual bush.
I sure hope, that Nokia will start taking ownership of its product issues and give us an update or some form of acknowledgement that it is looking into our concerns. Responsible companies will definitely demand a whole lot of customer respect. Take for example Microsoft. From time-to-time its software and products will run into venerability issues and Microsoft acknowledges these issues, customers concerns and releases a patch to fix the problem. Likewise, I hope Nokia will follow suit.
I have been a Nokia cell phone supporter for over 15 years. I am seriously, considering a swap to a BlackBerry once my contract expires with my service provider. Nokia please do your due diligence.

I can't download videos to Real Player. The settings are correct and i can download in Internet Explorer 7 with no problem but not FireFox 5...any ideas??

I can't download videos to Real Player. The settings are correct and i can download in Internet Explorer 7 with no problem but not FireFox 5...any ideas??

I'm still experiencing this problem. I went to settings, general, software and it says Install now. But when I try, I get an error message.

Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
    User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.

Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Safari can access iCloud with 1 login, but not others on same MBP

Hi all,
On my login I can access iCloud, but when I try it on the kids login, it comes up with a message about not being able to connect to server. I can access any other website ok.
The only parental control is to bar explicit websites, otherwise they have free access, and I have also added the iCloud URL to allowed websites.
Would any of you kind souls be able to assist me with this problem?
Many Thanks
Ravvy

Hi,
There can be tons of reasons for why certificates don't behave. Please compare installed cert's for the two affected users using mmc
http://msdn.microsoft.com/en-us/library/ms788967(v=vs.110).aspx
//jesper

Can send photos in message, but not recieve?

Seem to be able to send photos in messaging, but not able to recieve messages with photos or videos. Any help?

http://support.apple.com/kb/ts2755

ACR 8.4 CC RC install fails with AAM message 'patch not applicable'

ACR 8.4 CC RC install fails with AAM message 'patch not applicable' - Running Photoshop CC on OSX 10.7.5
Anyone seen this or have any ideas for a fix?
I also have my legacy CS6 installed on the same Mac - tried installing ACR 8.4 CS6 RC and that fails with the same dialogue box from AAM
The DNG converter installs no issue.
Thx
Chris.

Do you have some other software, like Photoshop Elements 12 on your system that would generally also be compatible with ACR 8.4 final but isn’t compatible with the RC because the RC’s only for PS users?
I installed the RC the same day it was released on my computer that has PS-CS6 & PS-CC with Windows 7 and it worked ok, so the update generally works, but something isn’t on your systems.
Are you up-to-date with your PS-CC version, which seems to be 14.2.1:
http://blogs.adobe.com/crawlspace/2014/02/photoshop-cc-14-1-1-update-now-available.html
And is CS6 updated to 13.0.6?
http://www.adobe.com/support/downloads/product.jsp?product=39 <http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh> &platform=Macintosh

Why can i send imessages to every other person with an iPhone but not one person

I can send an imesage message to every other person with an iphone, but not my uncle, who has an iphone 4s. We are both connected to wifi while texting and yet the message still shows up as green. PLEASE HELP

Get him to check he's got iMessage enabled.
Settings->Messages->iMessage needs to be 'ON'.
Also in the same screen check what addresses he has under "Send & Receive" to ensure you're using one of those (or his phone number).

Premiere crashes with 2 passes but not on 1 pass on flash export?

Premiere crashes with 2 passes but not on 1 pass on flash export. Premiere claim that RAM memory is too low even though I look in task manager that only 4.5 GB is used of 12 GB?
Can anyone confirm this bug and try to render a file from Premiere in flash format with 2 passes?
This is the first bug I found in side Premier CS5.0.2 exept low use of my GTX470 cuda cores.
Regards
Mikael
My system
Intel i7 920
Corsair 12GB (1600MHz)
Asus P6T Deluxe V2
C disk Intel SSD G2 with Windows 7Ultimate 64bit with the latest updates.
Adaptec raid card 3085 with 4x1000GB in a raid 5.
Nvidia GTX470
AJA Kona LHi
Cineform Neo4K
Adobe Creative Suite 5 Production Premium with the latest updates.

Yes F4V Huntrex that's my case http://forums.adobe.com/message/3215637#3215637
Exactly my problem and apparently I am far from alone.
Adobe, have you looked and found a solution for this?
Regards
Mikael

E71 with Nokia Messaging but not pushmail.

Similar Messages

Maybe you are looking for