E71x ate my email - two possibly related issues

I am no longer checking checking email with the E71x. Here's why-
I set up my E71x to allow me to check email on my Hotmail account and on my own POP email server. That means there were two accounts that my phone was "connected" to.
It seems that when I check email and delete a message that is "on the phone" it deletes the email from the server, too. Is there a way to make sure that the E71x will keep email messages on the server? It was very annoying to clear up my phone and discover that the mail was gone when I checked on my computer. I have been checking the setup instructions and can't find an answer.
Also, a second issue, recently the E71x displayed the message "System Error" periodically over the course of about 10 days. I guessed that this was some AT&T issue. However, on one occassion the phone acted as if it had crashed (for lack of a better word) and when I restored it I discovered that it had somehow deleted all the mail in my Hotmail inbox. I know this was not a random Hotmail burp.
I am not using the phone for email anymore as my experiences are less than satisfactory. I would like to use it for email, so I have two questions:
1- How can I set up the phone so that it keeps mail on the server and does not delete it?
2- How can I make sure the phone doesn't eat my inboxes, again, if it crashes?
Thanks in advance for your help.
Roger

Hi daredman01-
Could the unit simply be overheating? Have you vacuumed out the air vent that rns along the bottom edge of the mini?
Good job getting things backed up. How full is the hard drive?
Luck-
-DP

Similar Messages

OCS 10g Application De-provisiong problem & SYSAUX possible related issue

Hi,
Anyone experienced this before and know how to fix it? When we de-provision applications (RTC, Calendar, Content) it takes forever. Actually its stuck in the ff status:
Calendar (De-provisioning In Progress)
Content (De-provisioning In Progress)
RTC (Pending de-provisioning)
What could be causing this?
Can it be related to a problem we have w/ our SYSAUX tablespace? It is marked as status "RECOVER" when running the following SQL:
SQL> select file#,name,status,enabled from v$datafile where file#=3;
Its enabled "READ WRITE".
Is it difficult to fix/resolve this kind of issue problem? How?
Thanks in advance.

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

My 27" imac won't boot in normal mode. The screen stays white. I have upgraded to Yosemite. However, the computer does boot in safe mode. Could this be a virus related issue or possibly a video card issue?

My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

CS5 HDR pro two photos alignment issue

Although I really enjoy the new tool, I'm having trouble aligning two photograph when I open then through the HDR pro tool.
Why is alignment of two photos so bad in HDR pro and perfect if you align the two same photos as two layers? I've even tried reopening the same files over and over and get different results each time in HDR pro.
In view of this, shouldn't there be a realign button in the slider adjustment screen, or options for alignment, such as Use the regular auto-align?
Since alignment works fine with layers, is it possible to have an option to use layers as a starting point for HDR pro instead of opening saved photos only? I realize this probably might not give perfect results as just fixing the automatic alignment issue...
But hey, I'm just trying to find a workflow around this if I didn't have my tripod with me at time of shoot... and I shot only two photos to composite.

Hi Chris,
thanks for looking into this matter. Where do you want me to send the files (over 50 megs zipped).. they're CR2 files...
Date: Fri, 28 May 2010 14:38:51 -0600
From: [email protected]
To: [email protected]
Subject: CS5 HDR pro two photos alignment issue
Don't know what could be going wrong. Can we get the files so we can try to reproduce the problem here at Adobe?
>

To everyone with IOS6 Sound related issues & Others

If you are facing a problem of not having any system sounds, notification sounds, no calls or other software sound related issues I'd suggest you read below it's a stupidly simple fix and it should solve most software issues after an immediate iOS6 update:
After updating unplug the phone from your computer and leave the phone alone for 5-10 minutes, if you still have problems: reboot, wait a few minutes and all sound related problems should be fixed.
When I updated to iOS 6 I had lost my system sounds, so I unplugged from the computer, rebooted the phone and still no go. I decided to just let the system "settle in" for a bit, let it lock and when I unlocked after 5-10 minutes sounds were back and everythings up and running again.

Well, to break it down. After my sounds finally came back (2nd time losing them) last night I decided to restore the phone in itunes. I did it twice. First time I backed up my data. Second time I restored it as a factory iPhone. Both times guess what NO SOUNDS! I also realized that last night I had lost my sounds after charging my phone and unplugging it from the data cord. I still have ringtones (when someone calls), but text messages, emails, and any other alert tones do not work. I cannot turn the volume up or down with the side buttons and also music does not play. It doesn't even have a slide bar at the bottom.
I am on the phone with apple care now. They seem to not be aware of the problem at all.
While I was on the phone with them my sounds ended up coming back, imagine that. Hopefully every time I charge my phone I am not going to have this issue.

How to Handle BARCODE related issues in WebDynpro ABAP

Hi All,
How to handle barcode related issues in WDA?
is it possible in WDA or not?
please provide information or any links related..
Thanks,
raj.

Hi ,
You just need to install the software comes with the barcode scanner in the local PC and while reading you have to put the cursor on the field like inputfield . a barcode when interpreted by scanner is nothing but alphanumeric words.
Regards
Yash

Possible DNS issue with AirPort Express basestation?

Hi all -
Up until recently my Airport Express has been working great. This past weekend I started noticing that website browsing became slow, and some websites would not come up at all (e.g. popular sites like wordpress.org).
Otherwise my internet connection works fine (email works, browsing for the most part is normal for all computers on the network, pc and mac).
I read that this could be a possible DNS issue. I unplugged the AE basestation and plugged my Powerbook directly into my cable modem and was able to get to all websites that I couldn't get to while using the AE. That, and browsing was a heck of a lot faster (it seemed).
Can anyone help me out and point me to a specific setting on the AE that I can toggle, correct, whatever, to solve this (possible) DNS issue?
Thanks!
Jeff

Dear Henry, Thanks for your reply, and we are sorry for having intruded upon the wrong thread with our troubles. Perhaps you could point us to the most pertinent thread. Further pushing credulity Might you assist us further?... We have checked every floor in the building and no new equip has been added, though I can't speculate on the 'hood at large. We added a Time Capsule to the mix hoping that might bring back some stability and speed, but results aren't very promising so far. perhaps you might point us to a resource for professional help, or web sites that may help us define and implement something beyond the ad hoc system we have currently. We have read through the Apple docs regarding Designing Networks, and though informative they don't necessarily explain the nuances / consequences of different configurations, for instance, that WDS will adversely affect net speed. Thanks in advance for your input (should you wish to assist). If you are so inclined I can provide the snap shot of our list of hardware. And again apologies if we are in the wrong place.

I'm usually asked in interviews what r common RAC related issues do u face

I don't know much because generally what I face are general DB issues and at the max i see some
rac related wait events 2 way or 3 ways grants .
Can somebody plz give me some idea what kind of RAC related issues people face in 10g or 11g RAC
Thanks
Gagan

Global Cache Wait Events
gc current/cr request: These wait events are relevant only while a gc request for a cr or current buffer is in progress. They act as placeholders until the request completes.
gc [current/cr] [2/3]-way: A current or cr block is requested and received after two or three network hops. The request is processed immediately: the block is not busy or congested.
gc [current/cr] block busy: A current or cr block is requested and received, but is not sent immediately by LMS because some special condition that delayed the sending was found.
gc [current/cr] grant 2-way: A current or cr block is requested and a grant message received. The grant is given without any significant delays. If the block is not in its local cache, a current or cr grant is followed by a disk read on the requesting instance.
gc current grant busy: A current block is requested and a grant message received. The busy hint implies that the request is blocked because others are ahead of it or it cannot be handled immediately.Oracle RAC need Gigabit Ethernet for Interconnect(don't use cross cable), create index to reduce Global Cache Wait Events.
Can somebody plz give me some idea what kind of RAC related issues people face in 10g or 11g RACWhat did you know?

Related Issue column in tracking list gets changed into drop down list in Infopath

Hi All,
i have created Tracking list in sharepoint 2010. which has column[Related issue - lookup for field in list[title] by default.
this field will have a multiple selection check box,2 buttons [Add and remove] and text box[which show the items selected in check box].
my issue is ,when i try to modify my list in Infopath. this column[Related issue] gets changed into drop down list item.Is is possible to get the same [old format] back. if so pls guide me..
I faced the same in Radio button,but i restored it by changing it into option button in Infopath
V Jean

Hi ,
The
multiple-selection list box control should be by design in InfoPath form, which is corresponding to the SharePoint "Related Issues" field, in my opinion, it cannot be converted to [old format] in InfoPath form, you may need to use SharePoint Designer 2010
to customize your Issue Tracking list NewForm.aspx/EditForm.aspx per the way in the following article, then "Related Issues" field will still be the old format,
http://www.cjvandyk.com/blog/Articles/How%20do%20I%20-%20Customize%20the%20NewForm.aspx%20or%20EditForm.aspx%20of%20my%20SharePoint%20list.aspx
Thanks
Daniel Yang
TechNet Community Support

How to take care of Performance related issue in DRM?

How we can optimize or take care of performance related issues when we have huge data in DRM application? especially when comes to Imports and Exports.
Thanks
-Ramesh

Hi Ramesh,
Below some suggestion from my side.
1-Try to keep Current version open at the time of export and automator run.
2-At extreme use derived property , else manage with somehow if you can
3-If you are creating any derived property make sure you are restricting to related hier
4-In case you are creating derived property check performance to take big hier with derived property node name and description ,if performance not seems to you satisfactory go with some other logic.
5-Don’t use much looking property like Nodeinhier, hiernodepropvalue etc , if need then only use these
6-Tack care of validation if you can do better with verification then don’t put validation in that case
7-I do see some problem while loading data from DRM to DB try to avoid and use some workaround if possible ( like Sql loader)
Not sure how much useful will be for you these points above.
Thanks!
Sandeep

Lenovo A7000 S142 Firmware After Update Users Related Issues

Dear Lenovo Smartphone Technical Team , Lenovo A7000 New Firnware Update S142_150630 ( 46.45MB ) Recd.On 06.07.2015, After Update Users Related Issues some of Given Below. 1 ) Wi-Fi Connection not working after update.2 ) Battery drop down at 20% to 15% immediate.3 ) Messaging Issue ( Takes Times To Response )4 ) Back Key Responding Lags Now5 ) After Update Phone Getting Little Bit Lags Now.6 ) Gameloft Mod APK Issue.7 ) Heating Issue ( While Game Play, Charging Time, Downloading Time, Camera Using Video Mode )8 ) Camera Video Portrait Mode Shooting not seen proper view while landscape Mode Watching.9 ) Phone vibrates on call connect even this feature is not enabled.10 ) Led notification lights are not working11 ) Touch Response Issues & OTG Issues.12 ) Camera Day light photos & videos superb but night or low light photos & videos not good.Guys I Had Research on each of reviews related A7000 and noticable issues mentioned above, if there any issue left by myside please you can mention it in this forum. We all Lenovo A7000 users request to Lenovo technical team to resolve those issues and give satisfactory update as soon as poosible so every users can happy with this & feel proude to use Lenovo brand. Thanks & Regards, Bhavesh K. Patel

yes Bhavesh i am totally disopointed its very poor support lenovo people first two days iam happy 3 day starting struggle becouse i updated s142 update. i am great fan of asphalt 8 but gameloft mod apk was not istalling.what necessary about Octocore proccessor 2 gb ram not installing mod apps totally waste of money this is not a mobile just like iron box

When I try to open an email, two (2) "Firefox Document(s)" try to download. How can I stop this?

I have Window7 64 bit and use Microsoft Outlook 2010 for email. Every time I open an email, two documents try to download. They are each called Firefox Document with very long "names"(?). An example is {86E67A0-2915-4CDA-8941-96A5C9A3FCF8}.hmtl.
I have to cancel one and then the other popup windows. Then the same thing happens for the next email I open but the "name" of the file is different. In addition to this being a pain in the butt, I'm now afraid to send any email for fear the receiver will get the same problem. I was thinking of doing a restore, but read that such an action by design does not change email. How can I send you a screen shot?

If this is not an intentional change by your email website, you might try the following. When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

Can we set up a forum for Security related issues?

I know many of us think security is a Windows related issue, but from time to time there are security issues that may come up. I had a question so I looked and couldn't find a forum, so I posted in one of the OS X 10.6 sub forums.
Thanks!

I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
I am not aware of any other forums that deal with OS X security issues
exclusively, so this forum could be a good place to bookmark and visit from time to time.

Many Sporadic Preview Related Issues

Not sure if this is where to post/report Lightroom 5 issues or not, but here are preview-related issues I am experiencing...
Preview panel "preview" freezes indefinitely.
App very slow to load while creating new previews. (previews take forever to create and update)
Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections)
This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections)
This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
Hope you are working on this. It's making work a struggle. I'm not just a "consumer". ;-)

This is a user to user forum so the responces you recieve here will mostly be from users like your self. I am sure someone will respond on how to help dealing with the problem you are experiencing.
The official forum for reporting bugs and making feature requests is at the web link below.
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

Unicode related issue in 4.6c to ECC 6.0 upgrade

Hi
I am doing upgrade from 4.6c to ECC 6.
Here I am getting one unicode related issue.
"The data object A948 does not have a component called ZZMATWA.".
This type of issues , how can I resolve.
I am very new to upgrade, Plese do help me.
Regards
Sandeep Reddy.

Hi,
Can you give the error what you are coming across.
Regards,
Suhas

E71x ate my email - two possibly related issues

Similar Messages

Maybe you are looking for