E71x & Call Connect for Cisco

After getting the runaround from both Nokia and AT&T regarding the functionality of Call Connect for Cisco on this model of device (Nokia bounced me to AT&T, saying the E71x was AT&T's custom model, AT&T bounced me back to Nokia, saying that Nokia was the manufacturer), I finally got someone that told me Call Connect would function.
On that advice, we ordered (4) E71x's from AT&T.
They arrived today, and I'm trying to install the .SIS Call Connect package.
PC Suite is installed, the phone is talking to my PC.
I attempt to install CC, and I get:
"Application not compatible with phone. Continue anyway?"
I go ahead and continue, it checks certificate validity, gives me details on "License Manager".
I click continue, checks certificate validity again, and starts installing (progress bar time).
I wait.
The Nokia CC Cisco EULA comes up, I click "OK" to agree to it, and receive the warning:
"Nokia CC Cisco
Phone model is not supported! Press Cancel to abort installation."
Obviously, cancel aborts. If I continue, the progress bar returns, grows, and eventually errors out with an odd tone:
"Unable to install. No access."
Then dumps me back to the menu.
Has anyone played with this yet?

Hrmm...
I see that it doesn't show the Nokia VoIP 2.3 - is that required for Call Connect? I thought Nokia VoIP was a seperate functionality.
When speaking with both AT&T and Nokia prior to our purchase of these phones, I was assured that they had the VoIP capabilities.
That list appears to be inaccurate in some aspects for the E71x - it doesn't list the following for the E71x:
Nokia AV 2.5mm
Nokia microUSB Cable CA-101
USB Mass Storage
The E71x has all of these.
I'm having another problem too, locating any 802.1X configuration, which is also advertised on this model...
Message Edited by kythri on 12-Jun-2009 04:34 PM

Similar Messages

E66 Nokia Call Connect for Cisco

Help! Does anyone knows if E66 support Nokia call connect. Downloaded the latest version available under Nokia Business site but the software won't load. What version of Nokia CC needed to be use to support the e66. Where can the file be downloaded.

Hi,
Yes, E66 is supported.
You can download Call Connect for Cisco client from here: http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php
So you tried to install the NCC but something went wrong? Did you see any error notification?
Or what actually happened?
Br,
-Pasi-

Nokia Call Connect for Cisco

Hi,
i have received licensing document from Cisco for Nokia E series phones the
product description : Nokia Intellisync PBX connect for CCM "10 users" or what you called Nokia Call Connect for Cisco . i have email tac.nokia team but no reply from their end would you assist me how can i obtain licesing registeration key for the software.
Regards,
Saeed om

i have the E72 and have Cisco. i bought the lisence but did not know how to :
1- how to create a profile
2-how to configure cisco
2- how to active a profile
thanks,

Cisco Call Connect for Cisco 2.0 and E52

Hello,
We have a lot of Eserie, old models, using Call Connect for Cisco 1.1 registered to Cisco Communications Manager 6.1. They are well registered in SCCP protocol to the CallManager, and we use the phone model type 7970 to register them.
Now, we received new model E52 which requires Call Connect for Cisco 2.0 release. But we experienced issues registering them into the CallManager 6.1 and phone model type 7970. Apparently there is a model mismatch.
I would like to know if everyone found the right model type to register them without installing the COP addon adding the Nokia CC model.
Best regards,
Yorick

Hi!
Just for curiosity; why wouldn´t you install COP addon?

Can't remove Nokia Call Connect for Cisco 2.02(705...

Hello,
I installed the app Nokia CC for Cisco but i want to remove it. When i try to uninstall it in the application manager i get the message "removing canceled" when the progress bar is at the end.
In the file swilog.log on the phone memory is an entry:
Nokia CC Cisco : Failed with -3
Nokia N8 with Anna product code 059C640

finally i did uninstall for nokia cc cisco, i found it on the program documentation on nokia, and states as follow
Some S60 5.0 and new Symbian OS versions do not allow NCC uninstallation via App
Manager. If you need to remove/uninstall NCC 2.2 manually from these devices device it
can be done following way
- Menu => Applications => Options => Edit
- Long key press over “Nokia CC Cisco” => Delete => Done
Thanks
Regards

Problems removing Call Connect for Cisco

Hi, I have a problem trying to uninstall this app. I get a message that applications need closing, I say ok, gets to finalising uninstallation then has an error. The app gets removed from installed applications list however my contacts still have Cisco VOIP call option and I cannot get rid. Any ideas or anyone seen this?

Hi!
Just for curiosity; why wouldn´t you install COP addon?

Nokia Intellisync Call Connect for Cisco using E90

HI All, I see that the above software has been released with version 1.1.1 to support the E90, but it mentions in the release notes that the E90 needs 200.x.x firmware, I am running 7.40.1.2, would this mean i need 7.200.x.x and when is this available?

25-Jan-2008 07:34 AM
abadran wrote:
HI All, I see that the above software has been released with version 1.1.1 to support the E90, but it mentions in the release notes that the E90 needs 200.x.x firmware, I am running 7.40.1.2, would this mean i need 7.200.x.x and when is this available?
This software is something you dont wanna download on your phone without any help from Nokia. I bought my brand new E-90 installed this software the very night and next day boom phone went dead. Within 48 (the SLA) got me a new phone as a replacement after which i didnt try this software i have tried several others phone works good.
So beware!!!

Nokia Call Connect for Cisco - N8

Anyone know when this will be available on the N8?
Has anyone tried with a version not officially compatible with Symbian ^3?

Anyone? Anyone from Nokia care to enlighten?

Maximum concurrent call connections for our Call Manager v7.15

Hi everyone,
Hope you can help! I was just asked one question I should have known how to answer...
We are using CM 7.15. Have 1 publisher and 1 subscriber. We have 2 pri T1 (24 slots). One connects to 1 2821 Voice gateway and another one is connection to another 2821 voice gateway in another location. I do not think we use SIP trunk...but I am not sure if we are using mpcp or H323.... so how do I check which protocol I use?
The most important question is... I would like to ask how I can find out what the maximum concurrent sessions of the call connections are? How do I find it out?
Please help...thank you very much for your help.
Takumi

Hi Bobson Lam,
in CUCM Administration > Device > Gateway, you have a list of configured Gateways ... in this list there is a column called 'Device Type', this column shows the 'H.323 Gateway' or the Gateway Model (for ex.: 2821) if it's MGCP.
For Maximum Concurrent Sessions ... have you try RTMT (CUCM Administration > Administrations > Plugin > RTMT for Windows)? There are some System - Performance, that shows, for example, Call Active for H.323.
Hope this helps.

Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about related to the initial setup of UCS C & B Series which include LAN connectivity from the UCS perspective with Cisco subject matter expert Kenny Perez.
In particularly, Kenny will cover topics such as: ESXi/Windows installations, RAID configurations (best practices for good performance and configuration), VLAN/Jumbo Frames configuration for B series and C series servers, Pools/Policies/Upgrades/Templates/Troubleshooting Tips for blade and rack servers, Fabric Interconnects configuration, general compatibility of Hardware/Software/drivers amongst other topics
Kenny Perez is a technical leader in Cisco Technical Assistance Center, where he works in Server Virtualization support team. His main job consists of supporting customers to implement and manage Cisco UCS B series and C series. He has background in computing, networking, and Vmware ESXi and has 3+ years of experience support UCS servers and is VCP certified.
Remember to use the rating system to let Kenny know if he has given you an adequate response.
This event lasts through October 10th, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi,
Actually we have UCS 6248 fabric interconnect - first twelve ports are enabled and same in Cisco UCS Manager.
But when more port will be active by expansion module then UCSM can manage that too or need any other licence for UCSM too?

Is there any apps for vibrate on call connect?

Before this I'm using android phone, change to Iphone 5, and get use without seeing the phone when make a call, and when call connect the phone is vibrate. I found this useful when driving. Is there any apps for this? instead of downloading it from cydia (phone buzzer), it's meant we need to jailbreak our Iphone, and i don't want to do this.

https://itunes.apple.com/eg/app/call-vibration-free/id565089253?mt=8
it's a trial version i beleive it will expire within 2 weeks & you have to call via the application it self however you can pay 0.99 U$D then you will be able to use it for life & even through the phone icon/app on your iPhone and No need for Jailbreak

Downloaded Cisco Connect for E1200 v2 disk image damaged. Now what? recent Mountain Lion upgrade

I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.
After a Panic last night I was advised to make sure everything updated including router firmware.
When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.
So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.
So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
I'm running on a mid April 2010 13" MacBookPro
Any suggestions? This all is rather confusing.
Kathi

Well I was trying to update Cisco Connect so it would work w Mountain Lion but after 3 tries at the download I kept getting this same error message that it is downloaded. I even shut down & restarted before the last time w same result.
I should not have to spend hours of my time to get this to work. That is ridiculous.
Right before starting this process I checked for Apple updates & found a firmware update for my MacBookPro. I quickly downloaded & installed it, no problem. It took a very few minutes & then I backed it up & started working on this many hours ago.
I am an end user--not an IT professional. I just want things to work. I should not be expected to have to spend hours trying to figure out how to get stuff to work & still it doesn't. So I guess Linksys doesn't care that much about making things easy for Mac users.
I recently had the cable co come out & check the levels & all. they all checked out ok & they did change the fittings in several places on the coax connecters for good measure.
My cable modem is set up just across my living room from me & it is not a large living room. The router is right next to it, but it is not at a desk or place that is very comfortable to set up my Mac.
I sure hope that those security settings have been set up by default when I orginally set this up about a year ago. & I don't reall know how to change those settings without Cisco Connect, which I have been unable to get reinstalled since i keep getting those warnings about it being damaged.
I just want my computer devices to work. I don't want to have to spend hours troubleshooting them w poorly written instructions that don't really tell how to update firmware & Cisco Connect for tnose of us who have already had it set up before upgrading to Mountain Lion.
Having a link to download Cisco Connect that supposedly works w Mountain Lion but doesn't since it keeps giving a warning is not very helpful. There was nothing I saw in all my searches to tell what the results of even being able to upgrade Cisco Connect. Would it be able to figure existing settings? Didn't see anything that explained how that would work.
I don't appreciate my time being stolen by making it so hard to just get this updated! I"m giving up on this. I may try taking it back to Best Buy to see if they can tell if the router itself was also defective but I think I will likely go get an airport Express so I have a reliable router that is easy to use!
Kathi

I'am cannot to connect to WI-FI I have I phone 6 my wireless is Linksys US E2500 no problem with my I pad or Imac keeps asking for cisco password admin what I tried

I cannot connect to my WI-FI with my new I phone 6plus all my other Apply equipment works Ipad and Imac my router is cisco Linksys us E2500.
Keeps asking for a password for Cisco system I have tried amin did not work. What is the answer?

Hi rsparkman,
Welcome to Apple Support Communities.
The article linked below provides a lot of great information and troubleshooting suggestions that’ll help resolve the issue with your new iPhone 6 Plus not being able to join your Wi-Fi network.
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Cheers,
-Jason

No variable audio output for Cisco CHS 435HDC set top box.

Background: Until the other day I had my stb connectected to a TV, using TV sound, with an HDMI cable. The P265v2 remote volume control changed the TV volume. No problems.
My new TV & home theater system was recently installed. We don't use the TV speakers. While my first preference was to program the Verizon remote to change the volume on my Onkyo receiver, this did not appear to be an option on the remote's programming instruction page on the Verizon website. Instead, I am directed to change a setting on the remote that makes the Verizon remote change the stb output volume vs the tv volume. I changed the setting on the remote and ensured the stb box was set up for "variabe" audio output.
Problem: Using the stb variable audio settings, volume settings 1 through 30 produce the same volume. (Volume setting 0 produces no volume, as one would hope.) It appears the "variable" setting isn't producing a variable output as it should be on this unit.
Thinking that maybe the receiver was complicating the sitation, I tried connecting the stb to the old TV and the new TV directly and had the same results.
Now, while I am watching TV, I need to have the receiver remote at hand in addition to the Verizon remote. It would be nice to have the volume be adjustable as it should be while using the Verizon remote. I don't like the idea of using a seperate universal remote because then I would lose some of the functionality that the Verizon remote provides when watching TV, using the DVR, watching on demand, etc.
I would like to know if this is a problem just with my unit, or if it exists with all of these units, which would hopefully be fixed with a Cisco/Verizon firmware update soon, hopefully.
Thank you.

soups230 wrote:
Having same issues with hdmi and optical. Any fix to this.
Hello,
In order to control the volume on your home theater system, you'll need a FiOS TV Universal Remote that has the 4-buttons on the top for 'DVD', 'Aux'iliary, 'TV' and 'STB'. The audio receiver would have to be programmed into the FIOS TV Remote, and controlled using the 'Aux'iliary button.
Verizon's 4-Button Universal Remote Controls are available for purchase:
a) online via www.verizon.com/fiosaccessories
OR
b) at a local FiOS TV store (call first to check if they have them in stock). For a list of stores: http://www22.verizon.com/support/residential/tv/fiostv/general+support/account+issues/questionsone/8...
Presently, the default remotes for new set top boxes are the 2-button P-265 (newer version) remotes.
Regarding a problem with HDMI/optical on Cisco 435 STBs, check out the following:
Go to this webpage: http://www22.verizon.com/Support/Residential/TV/FiOSTV/Receivers/Equipment+Issues/QuestionsOne/12839...
Click on the link for 'Cisco CHS 435 HD DVR User Guide'.
Open the PDF and go to page 22 for 'Connecting to a Home Theater System...'.
Hope this helps!

Problem with call connect license

Hi to all,
recently we purchased some call connect cisco software licenses. We first install those licenses without any problems. Weeks ago the customer bought some new nokia phone and we had to free old licenses to enter them in the new phones.
We entered it 7 licenses with no problems. the probme is with the eight one. Seems to be occupied so i cannot register the software. We have problem with just one license key.
I need to contact with somebody that can help me fron the nokia support team.
I got a copy of this license right here, so the only thing i jus need is to free this key.
Thank you so much
Bye

Hi Juan, thanks for your reply.
This software is my personal software, so my main machine is my home machine, I use the software at work as a convenience to myself since the most my company has ever bought is Acrobat Professional, even though I find myself tasked with website work, graphics etc.
I purchase all of my software and it is never used by anyone other than myself so that's not a concern - again my complaint was based on a wish to be able to manage my licenses from my Adobe account.
I don't quite understand how a feature like this would be a problem from "some countries" especially when my Adobe account already has "identifying" information about my previous registrations and contact info? Not to mention the majority of the world is internet connected?
You're saying it's easier to call Adobe 7:30pm (from "some country") on a Sunday nite (when a client is scheduled to come and review some work - which most likely means that there WON'T be any answer to the call to Adobe when you need it the most) compared to just accessing my Adobe account over the internet and turning off a license?
I don't understand that one?...
Yes, I plan on calling Adobe as I quoted since this seems to be the only answer to exactly WHY I was here searching last nite.
Again I appreciate your reply and I do HOPE that Adobe would take my suggestion into consideration.
Anytime a legit customer is prevented from using his own software is not a good look and obviously it creates not only problems such as I outlined but fosters ill will towards legitimate software licensing in general.
-Will

E71x & Call Connect for Cisco

Similar Messages

Maybe you are looking for