E71x Dial-up connection for internet access on ph...

When I lived in Africa I would use either google talk or skype to speak with my family back in the States. Wifi was extremely rare especially in my area so I had to connect via a dial-up connection. When I bought my E71x, I installed "Fring" on it (an amazing app) and I am able to call and speak to someone on google talk or skype over my phone. My question is, how do I setup a dialup access point for my cell phone so that I can access the internet and google talk/skype by that connection? Thanks, Joshua

I don't use either Fring or Skype in my handset, I use a program called truphone from www.truphone.com and the network settings enable you to use it via 3G GPRS or WiFi.
You should check with your network operator that this is permitted, as most see VoIP services as revenue loss and will disable the ports or charge extra for the service.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Similar Messages

  • I have dial up connection for my internet.  What equipment do I need to be able to watch Netflix on my TV?

    I have dial up connection for my internet  What equipment do I need to be able to watch Netflix on my TV?

    First need would be a high speed Internet connection, such as Cable, DSL or Fibre service. Dial-up has nowhere near the capacity to provide Netflix service.
    Stedman

  • Can I hook up a windows computer to my airport time capsule for internet access?

    We have hooked up our time capsule for the first time today.  It works wonderful on our apple products BUT can I connect a windows based computer to it for internet access? 

    Yes. Both Ethernet and 802.11 are cross-platform.
    (109122)

  • Using 2nd Built-In Ethernet port for internet access?

    Hello,
    I have a Quad-G5 running 10.4.8. In its current configuration, all its network communications, including web access, go over the active ethernet port (Built-in 1).
    Does anyone know how I could use the second built-in port for internet access only? I'd like to route local traffic over the first port, but go "out" over the second.
    The machine is on a corporate network, and proxy access is slowwww. I have the ability to use a direct connect to the internet, but still need to be connected locally. Any thoughts? Many thanks . . . JD

    Easy. Go to System Preferences > Network > Network Port Configurations and drag the port connected to the internet to the top, so that it has priority over the port connected to your LAN. This prevents DNS time-out when loading a website, but still allows LAN traffic over the other port because that traffic is most likely going to use ARP rather than DNS. For good measure, you can add your company's domain (such as "my_company.lan") to System Preferences > Network > Internal_Ethernet > TCP/IP > Search Domains.

  • Can tata photon plus be used with apple i pad mini for internet access

    can tata photon plus be used with apple i pad mini for internet access?

    No, you will not be able to use a wired connection. If you have a iPad wifi, it can be used only with a wifi and if you have a iPad wifi+cellular, it can be used with both wifi and 2G/3G and 4G.

  • Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

    Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

    Try deleting the account(s) you're having problems with, resetting your phone (hold on/off and home buttons simultaneously 10-15 seconds until Apple logo appears, release buttons and wait for it to restart), then add back your mail accounts.  I've read that this has worked for some.

  • Have a static IP for internet access - how do I replace my Linksys wireless router with Time Capsule?

    Have 5 macs on an ethernet network - some wired and some wireless to a Linksys router.  My provider uses static IP and DSL for internet access.  I am replacing an existing Linksys router with the Time Capsule.  The Static IP settings I have are IP address, Gateway, Mask, primary DNS and secondary DNS.  The Airport Utility is not as straight forward as the Linksys setup.  There is not a place to list gateway.  Consequently I am unable to connect to the internet and am back on the Linksys router until I get this resolved.  Any suggestions would be much appreciated !

    You enter the static public IP address info on the TCP/IP tab within the Airport Utility. For a static address, use Configure IPv4 = Manually. You use the Router field for the Gateway address.

  • ISA B2B logon  Error: No valid private connection for internet user

    Hello ,
    i used isauseradm to create a user zzweb with all authorizations for B2B..
    now when i try to log to
    http://host:port/b2b/b2b/init.do  with the user zzweb
    i have a runtime error with the logs :
    EXCEPTION]
    #1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
         at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
         at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
         at com.sap.isa.businessobject.User.login(User.java:143)
         at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
         at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
         at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
         at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
         at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
         at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
         at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
         at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    what does this error means..?
    i also realised that zzweb  was not created in CRM backen? should it be created ?
    many thnx for help ..
    Message was edited by: Blackman

    Its a late response... but if someone gets the same issue here is the solution.
    When you register try uppercase password . That should take care of that issue.
    The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
    Although the note says 5.0 the problem exists with ISA 4.0 too

  • User Authentication for Internet access

    Hi,
    Is it possible to configure authentication for internal (LAN) users to Authenticate (local/RADIUS/LDAP) for any kind of internet access through the ISA550/570? (like cut-through authentication proxy in ASA.)
    And Can the ISA550/570 act as a Web proxy?
    Thanks in advance.

    HI Sulu,
    You can configure captive portal for internal LAN users to authenticate (local/Radius/LDAP) for internet
    access through ISA500. (see attached screenshot)
    ISA500 cannot act as a web proxy. what is your use case ?
    Regards,
    Wei

  • I have to restart ipad each time for internet access.  Why?

    I have to restart ipad each time for internet access and some games.  Never happened until about 2 weeks ago.  ?

    Firefox is a browser: it doesn't require you to 'sign in'.
    It sounds to me like you have some kind of malware installed if you're required to 'sign in' every time you use it.
    I'd recommend you use Internet Explorer (''assuming that doesn't require you to 'sign in' too'') to go to http://www.malwarebytes.org/ and download the free version. It will quarantine any malware it finds so restart Firefox afterwards to see whether the problem recurs or not.

  • Vrf for Internet Access

    Hello,
    i'd like to configure a dedicated vrf for Internet access only. On my CE router i configured three vrf (Internet, red and blue) in the vrf internet i import the route target from blue and red, and the vrf blue and red i import only the default route. Everything is working fine, only one thing bothers me, i can ping from the vrf red destinations in the vrf blue and vice versa. How can i prevent this routing?
    thanks in advanced.
    Alex
    here the config of my router.
    ip prefix-list internet seq 5 permit 0.0.0.0/0
    route-map internet permit 10
    match ip address prefix-list internet
    set extcommunity rt 100:200
    ip vrf internet
    rd 100:100
    route-target both 100:100
    route-target import 100:110
    route-tarbet import 100:120
    export map internet
    ip vrf red
    rd 100:110
    route-target both 100:110
    route-target import 100:200
    ip vrf blue
    rd 100:120
    route-target both 100:120
    route-target import 100:200

    Hi Alex,
    Given the FW is the next hop for the default route, the traffic from one vrf to the other goes through the FW and get routed back to the CE and then to the respective vrf router. You could add the rules on the FW to prevent
    traffic being routed between FW.
    Regards

  • How many ghz should I get if I plan on using my IPAD2 for internet access, email, facebook and games for my children?

    How many ghz should I get if I plan on using my IPad2 for internet access, email, facebook and games for my daughters children?

    Ghz is the CPU speed and that is fixed for each iPad model.
    The GB is the number of Gigabytes of storage.
    I had a 32G iPad1 and filled it up with 5000 songs, 20,000 photos and about 50 apps.  It doesn't sound like you will need anything larger than that.  If you are just talking about a few dozen apps and email, the 16G version should be adequate.

  • Hi i use the hp lap in connecting for internet but not open the bro

    hi 
      i have some problam in my laptop in connecting for internet but not open for broswer and not update for software  tell the solution

    Hi @jerry3 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and not getting to the Internet. First try just to reset the router. Unplug from the power wait a few moments and plug back in.
    Can get to safe mode with command prompt? F11 upon startup choose safe mode with Networking.
    Can you get to the Internet in safe mode?
    Please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Is it possible to be connected with a 3G modem for internet access and a WiFi router for printer sharing at the same time?

    For our only internet access we have a 3G wireless modem. I have since purchased a WiFi printer and router to connect all the comptuters to in the house. The PCs have no problem with using both the 3G connection and the WiFi signal at the same time to print, however, the MacBook Pro will not connect to the 3G network and the router, it will drop the internet access from the modem and attempt to connect via WiFi (which has no internet access). Is there a solution that is available to remedy this? I attempted to create an adhoc printer network, however, the macbooks again will not print off of this, only the PCs. And I'm getting a bit frustrated overall with this.

    The 3G wireless modem is on one of the PC's correct?
    Why don't you pass the Internet through the Ethernet port to the router via Cat5 cable, then have that transmit a Wifi signal that everything else can use, then connect the printer to the router for print sharing?
    You would have to turn off the wifi on the comptuer with the 3G modem as it's physically connected to the router and can't connect to the other machines as they are all connected to the router for sharing.
    The Mac has the ability to pass, Internet Sharing in the System Preferences.
    Do you have software for the Mac to run the 3G modem?

  • I created a wireless network with my Time Capsule but would like to connect this network to a WiFi Hotspot for Internet Access

    I have created a Wirelss Network at home with the Time Capsule and would like to connect this network to the Internet.
    I can't use LAN Cable to connect to it anything becasuse I usually use the WiFi that runs through my building.
    Can I connect the Time Capsule to the WiFi hotspot somehow so that all computers on my network have Internet access and if so, what do I need?
    I need this done because the computers can only be connected to either the WiFi network or to my Time Capsule Network at any given time.
    Or is there a way to be connected to both networks simultaneously?
    I have two PC's and two Macs.
    Thank you for any support and I apologise for my ignorance. I am not too good with networking.
    I have tried the silliest of things like connecting a router to the TC only to then realise that the TC had an inbuilt router.
    I tried connecting a USB WiFI adapter to the USB Port on the TC but it doesnt detect it that way apparently.
    Please help!

    I have a kinda same problem @ https://discussions.apple.com/thread/3531642
    Please reply (somebody)!
    JeremyZ

Maybe you are looking for

  • How can we give navigation to go a saved pdf and open it, in obiee report c

    I have a requirement for obiee 11g report, that I have to create a report which have a column, whose value should be pdf icon and when we click on that it should we go to saved pdf and open it. Please give me reply as soon as possible. Edited by: 903

  • Im going to hong kong do i need an adaptor

    As it says above Im going to HK and bringing my 3 year old powerbook. Do I need an adapter to plug my PB into an outlet. It appears it will take the voltage (220) per specs. I have a 0 - 1875 converter but it says not to use it with computers. Any ad

  • Problems with auto-cap of I on ios6?

    I upgraded my 4s to iOS6 and not my auto capitalization of "I" is not working. Anyone else have this problem or know how to fix it?

  • Smartform output as a e-mail

    Hi, I want to send the smart form output as a pdf attachment in a mail. For that, I am getting OTF text from the smartform function module and converting the OTF to pdf attachment and sending the mail. But, when I am going to send the e-mail, I want

  • How to automate Expense Report Payments

    Hello to all, Would like to find out more information on automating expense report payments. Basically we like to have expense report payments directly deposited into employee bank account. Currently we have payroll directly deposited into employee b