E71x - Possible to increase font size other than f...

In the E71x, is it possible to increase the font size for the home page, icon descriptions, etc.?

joshk wrote:
In the E71x, is it possible to increase the font size for the home page, icon descriptions, etc.?Hi
I don't know whether Psiloc Font Magnifier is of any use to you:http://shop.psiloc.com/en/Application,262290,Psiloc+Font+Magnifier,UserGuide
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • When I create a stickie note, I can not save any font size other than the default.  How do I save a stickie with a larger or different font?

    How do I save a stickie note with a different font size other than the default?  When I create a note and save it using a larger font, it reopens with the default.

    Unlikely, I'm afraid.
    The LMS has no control over the playbar that pauses or plays the Captivate content.
    In a Multi SCORM package, the LMS also may be showing a TOC in the SCORM player with links to launch the lesson modules.  This TOC is in addition to the TOC inside the Captivate project file which gives access to sections of the module by jumping to slides that begin those sections.  But the LMS doesn't usually give you any control over the look and feel or functionality of that TOC either. 
    If your client is adamant that they want complete control over these areas, then your best option may be NOT to build this course with Captivate but build it from the ground up with another tool.  E.g. Flash, or Dreamweaver.  Either way, that will add a lot more time and expense to the project.  But if the client has the budget and is unwilling to budge on their requirement, then that's what I would be telling them to do.

  • Is it possible to create a book in size other than the presets? [was:Books]

    Is it possible to cerate a book in size other than the presets? If so, where do I go to enter my own dimensions?

    Create your design on one or more  master slides:    View > Edit Master Slide
    delete unwanted master
    then save as a Theme:    File > Save Theme
    Save as;  is achieved by pressing the option key then File > Save as...

  • How to increase fonts size in safari permanently ?

    My 24" iMac has a huger screen. However, this is of no benefits bcos whenever I launch Safari, the fonts & wordings are so small !!
    I can increase it by clicking VIEW > MAKE TEXT BIGGER.
    The problem is after I quit Safari & launch Safari the next time round, the fonts are back to the super small wordings. And I have to repeat clicking VIEW > MAKE TEXT BIGGER again !!
    Would appreciate if someone here can teach me how to set the default size to a big fonts size ?
    Thanks

    Thanks Andrew, that is exactly what I wanted.
    But if I increased, sometimes the words overlapped each other. How to avoid that ?
    What is the difference between the font size settings in
    Safari > Preferences > Advance > "Never use font sizes smaller than"
    as against the two font size settings in here:
    Safari > Appearance > "Standard Font" and "Fixed Width Font" ?
    Thanks

  • Is it possible to increase the size of the police in the finder menu in Lion?

    Hezllo,
    Is it possible to increase the size of the police in the finder menu in Lion?
    Thhanks for your reply.

    I see, in Finder you have the ability to see things in multiple views. I would very strongly recommend you use the Find Out How Video tutorials , specifically Finder Basics. You can increase the font size in any view by clicking the View menu - Show View Options where you can increase the font size.

  • In mail, how do you increase font sizes in a reply.  Cannot find things like "underline", "italic" etc either.  Where are they?  Entourage was easier!!

    In mail, how do you increase font sizes in a reply.  Cannot find things like "underline", "italic" etc either.  Where are they?  Entourage was easier!!

    Preferences/Compsing/set to Rich Text (only then you can use bold etc).
    Then Rightclick the toolbar in Mail, and clcik Customize the toolbar.
    Put the icons (with or without text) that you want on your toolbar.

  • Bold chars & increase font size in ALV Top of Page - OOPS

    Hi,
    I am using ALV OOPs to display my data.
    I am splitting the container and using top container to display headings in following way:
    data:   top TYPE REF TO cl_dd_document
      CREATE OBJECT top
        EXPORTING
          style = 'ALV_GRID'.
      lv_fontsize = cl_dd_document=>large.
    lv_text = 'HEADING'.
      CONDENSE lv_text.
      CALL METHOD top->add_text
        EXPORTING
          text         = lv_text
          fix_lines    = 'X'
          sap_fontsize = lv_fontsize         "cl_dd_document=>large
        CHANGING
          document     = cv_top.
    But the heaidng is not displayed with high font size and is similar to the text with cl_dd_document=>medium
    How can I increase font size of heading.
    Thanks!

    Hi Vasu,
    Use SAP_STYLE parameter in the method.
    Value will be HEADING or KEY.
    Regards,
    Amitava

  • How to increase font size in report

    Dear ABAPers,
    I got one requirement that i hav to increase font size in report.
    I am using Write statement in report.
    PL guide me regarding this.
    Regards,
    Simha.

    hi shakya,
    I have tried that,
    i think font size cannot be increased.....it wil auto adjust based on ur no of coloumns and records.... try to reduce the no of coloumns u r displaying, then it will auto adjust itelf.
    With regards,
    S.Barani

  • To increase font size in List Output in Report

    Hi, I have to increase the font size of my report's list output. I dont have to print it. So, please dont suggest print control. Only it needs to be displayed as an output.....
    Thanks.

    Sagar,
          If you want the font size to be more you can do that using the SAP GUI settings .The output will then appear in the increased format as it is only a list output that you are trying to see.press ALT+F12.Choose New Visual Design and then increase font size to maximum.
    Hope this helps.
    Cheers
    Nishanth

  • "apple-+" does not increase font size in preview pane in mail.app 4.2

    i have letterbox http://harnly.net/2009/software/letterbox/letterbox-beta-4-for-snow-leopard/ installed on my machine. before the SL upgrade, i could hit cmd-+ and increase the font size of the message i am viewing. that was super convenient!
    i can't do it any more. any ideas anybody on how to bring that back? btw, if i open a separate window for the message, i can use cmd-+ to increase font size. but no more can i use it in the preview window.

    the obvious suspect would be letterbox. it's beta (=bugs) and I've also heard report that it's incompatible with 10.6.2. you can try uninstalling it and see if that fixes the issue.

  • Increasing font size in Itunes 8

    OK, I know Itunes doesn't really allow you to increase font size over the "Large" setting. However, Robert Jacobson previously posted how to edit the ituneslocalized,qtr file in Itunes7 to change the default "large" font to 32pt.
    The font size for the "large" font in iTunes 7 is stored at offset 0x5358D, and for iTunes 6 at 0x446BE in the file
    \Program Files\iTunes\iTunes.Resources\en.lproj\iTunesLocalized.qtr
    By default the "large" size is 0xA (10 pt), but you can change it so say, 0x24 (36 pt) to make it very large.
    Anyone know how to do this in Itunes8?

    The offset for iTunes 8.0 is
    0x7D91C
    For iTunes 8.0.1 it is
    0x7DE38
    Hex editing isn't that hard! Trust me, you can do this without me writing a script for it.
    Download XVI32 (it's free):
    http://www.chmaas.handshake.de/delphi/freeware/xvi32/xvi32.htm
    Unzip the file to a folder and run xvi32.exe.
    First, quit iTunes if it is running.
    Then, *make a backup* of <pre>C:\Program Files\iTunes\iTunes.Resources\en.lproj\iTunesLocalized.qtr</pre>
    Open the above file in xvi.
    From the "Address" menu, select "Goto". Click the radio button "hexadecimal", then put $7D91C (or $7DE38 for iTunes 8.0.1) and click OK.
    The cursor should end up on "0A".
    From the "Tools" menu, select "Encode Number". In the "Number" box, type the font size you want (the default "large" size for iTunes for Windows is 10.). Select the "byte (1 byte)" radio button. On the right, select "Overwrite at current address". Then click OK.
    Save the file and close XVI32.
    Wasn't that easy?
    Now, if you open iTunes and select the "Large" font for the List Text, it should be the size you specified.

  • Please help! How to increase font size in RemoteApp?

    I have weak-sighted user.
    There is some RemoteApp running on Windows Server 2008 R2 Standatd x64.
    I need to increase scale of fonts to 125% and use 120 dpi fonts for this user.
    But  increasing scale of fonts disabled on RDP Session.
    Option to use 120 dpi font doesn't exist.
    On Windows Server 2003 I can locally increase scale and dpi and this apply for RDP sessions of all users.
    If I locally increase font scale on Windows 2008 R2 this doesn't apply on RDP Session.
    I tried to use desktop customisation to increase fonts of Windows Title, Menu and etc for this user. But I can't increase system fonts on dialogs. 
    Please help me to increase font size for my RemoteApp.

    This is an old thread, but the problem persists on W.Server R2
    Interestingly, as Microsoft removed this functionality to solve this problem, wich in my case, with thin client's connected to the server, the problem is aggravated.
    It seems that there is not the slightest intention to solve this problem by Microsoft, since it is understood that each end-user settings, is completely independent of the configuration that should be the default Server or System Confg.
    Jesus..!!

  • How to increase font size in menu bars

    Hi, have eyesight dissability, need to increase font size in all menu bars for my brand new G5
    have any ideas? thanks
    Pepe

    System Preferences>Universal Access. Or change the resolution to 1344 X 840. System Preferences>Displays.
    BTW if you have a MacBook Pro it is not a G5. It is an intel Mac. G5 Macs were discontinued years ago.

  • How to increase font size in Java script alert message

    Is anybody know how to increase font size in Java script alert message
    THanks in Advance ....

    Hi,
    You can NOT do it with Javascript.
    You need an alternative solution: http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/popup-box_84.html
    Tobias

  • INCREASING FONT SIZE FOR GR SLIPS

    HI Everyone,
    i need to increase the font size whiule printign out the GR slips. Now i maintained the paramters for output type WE01 in MM cusomizing. Its all setup. All I need is I need to increase font size for the GR slip when its printed out for batch number , and Stock details. How do I do it in SMARTFORMS.....

    hi
    take help of your abaper for this
    also for good rplys post this in ABAP forum

Maybe you are looking for

  • Create materialized view with specific column sizes

    Hi all, I'm trying to create a materialized view with a specific a column size. Something like create materialized view test_mv refresh force on demand as select id,        cast(my_compound_field as nvarchar2(50)) from ( select id,               fiel

  • Write data to a file in OBPM 11g

    How to write data to a file in OBPM 11g? I want to capture all the data from the begin of an instance through the end. Please let me know how to do it. Thanks in advance..

  • WIP Procsess

    Dear Experts, M fresher to this field. i just wanted to know the entire process in WIP(Work in process) in SAP. like how the line items are going to be cleared(nullify). with respect to WIP, In standard report FBL3N, while executing with cleared item

  • Functionality of 'Assign Automatically'

    Dear Experts, What is the functionality of 'Assign Automatically' available in workload redistribution? St. Purchasing -> Workload Redistribution -> 'Assign Automatically'. I have selected an Bid Invitation and click the above button. Nothing happens

  • Change Printer Name

    How do I change the name of my printer so I know on my iPad to which printer I am sending a document to? I went on and changed it on HP utility, but it still shows up as the same name as the other printer in the house and I can't differentiate to the