E72 and SIP - unable to make sip calls

I have my E72 configured with SIP using the nokia sip client. Receiving calls work fine, however being called on my sip number causes the calling phone to go ' busy' when I pick up on the E72
Anyone a clue?
No software updates available for my E72
Thanks

Try another sim even if yours works on ither phones. Failing that, you could try resetting your phone. remenber to backup your spdata beforehand. If the reset does not fix the fault then I suggest having it checked out at your local Nokia care point. You can locate your nearest care point using the link below.
www.nokia.com/support

Similar Messages

  • New Subscription, BUT unable to make OUTBOUND CALL...

    Hello, I'm unable to make outbound calls because my skype credit was low. I went ahead and purchased a WORLD subscription and still unable to make outbound calls. Please help or FIX!
    What would it take for an ADMIN SUPPORT person from SKYPE to post to my entry. It's simple, I purchased a WORLD subscription when I ran out of skype credits. Now, after the subscription has been purchased and delivered to my account. I can't call a local UK land-line or toll-free line still. PLEASE HELP?

    Hi,
    Calls to UK shared cost numbers are not covered by subscriptions. Since shared cost / premium numbers have much higher rate you will need Skype Credit.
    Calls will be charged based on these rates: http://www.skype.com/intl/en/prices/payg-rates/
    Note: If you don't get an answer in forum then you can also contact customer service who is available 24/7
    https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

    I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

    I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

  • I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

  • I am unable to make video call from facebook.

    i am unable to make video call from facebook or skype

    Turns out this may have been caused by having multiple IP addresses on one NIC
    Find some error message by the
    Lync Server 2010 Logging Tool.
    Also Check your configuration is set according to Microsoft best practices with
    Best Practices Analyzer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Unable to make phone calls abroad

    Hi
    I am currently in France and am unable to make calls from my phone - I am able to send texts, receive texts and receive calls though. When trying to make a call it comes up call ended or the company is unable to connect the call.
    Thanks
    James

    Hi
    Yes I have rebooted the device, tried removing sim and replacing sim, toggling the aeroplane mode on and off and turning data on and off also.

  • HT1937 i am unable to make outgoing calls

    I am unable to make outgoing calls, my carrier is a MTN and i have recently bought the phone

    You are posting in a 14 month old thread.
    Parampal Singh wrote:
    I updated device after that it happend 2/3 days was good
    See the Thread YOU started where assistance is being offered for YOUR issue.
    https://discussions.apple.com/message/22414503#22414503

  • I changed the picture in my contacts and now if I make a call, it shows in the whole display and not only as before in top of the display ! Why ??? Any idea???

    I changed the contact picture in my iPhone 4s and now when I make a call the picture of the contact shows up in the whole display !
    before i changed the picture of the contact the picture was only on the top of the right side ! now not any more !!! Why ? Any idea

    See this Discussion...
    https://discussions.apple.com/message/16617056#16617056
    To take advantage of All the Features in iOS 5 See Here
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

    I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

  • Weird noises and voices when I make a call

    Hello. I use Skype all the time at work. I usually make international calls and sometimes receive calls. Now and then, when I make a call, I can hear some weird, very loud noises in my headphones. It's like bits and pieces of conversations mixed with crackling and bumping sounds. Meanwhile, I can also hear the phone ringing. The noises stop when the other party picks up. The problem is they are very loud and my ears hurt every time because I keep the volume pretty high so I can hear the clients answering (the volume of the conversation automatically depends on the country I call) . What could be the problem? It happens with different headsets, different computers and different internet connections.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • HT4534 i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

    When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
    I also have this problem...........

  • IPCC system give error message i.e I'm sorry we are currenty experiencing system problems and are unable to process your call.

    Dear support,
    as we are uing ipcc system  Cisco Application Administration - 7.0(1)_Build168 Package: Cisco Unified CCX Enhanced
    when user dial service desk number after working hours must be transfer to mobile but its  not working
    user hearing the  pop up welcome message after then user hearing the ringing then user hear the  
    error message i.e I'm sorry we are currenty experiencing system problems and are unable to process your call.
    so please advice ....
    regards
    syed

    Before you perform a reactive debug, I suggest you practice on a non production script.
    The first thing you will need to do is, open the CRS Script Editor and log in.  You cannot Reactive Debug if you're not logged in and connected to the UCCX server.
    Next, press CRTL+Shift+R to open the reactive debug dialog.
    Select the script name from the list for the script you are troublehsooting.
    Select how long you want the system to wait for the next call before cancelling the debugger.
    Press OK
    Place a call into the script.
    At this point a script window should open and the Start step should be highlighted in red.
    Press F10 to step through the script, step by step, analyzing what's happening.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • My iPhone 4 shows the carrier name, I can go online with my data plan, but there are no bars and I can't make phone calls.

    My iPhone 4 shows the carrier name, I can go online with my data plan, but there are no bars and I can't make phone calls.
    It worked for some time, less than a week, I made phone calls and all, and all of a sudden the problem mentioned above happened. Now I can't make any phone calls. I can go online with it, even with my Data plan, I can go to the app store (of course) but can't make any phone calls.
    Please help, this is frustrating.

    Did you already try the troubleshooting mentioned here? http://www.apple.com/support/iphone/assistant/calls/
    Also try to reset the phone by holding the sleep and home button until the Apple lo comes up again. You will not lose any data doing this.
    Message was edited by: Ingo2711

  • I just got my phone replaced and I can't make phone calls. It says I have service and I can literally do everything else, including FaceTime, but no phone calls?!?!

    I just got my phone replaced and I can't make phone calls. It says I have service and I can literally do everything else, including FaceTime, but no phone calls?!?!

    try resetting your network settings, it just resets wifi and carrier settings, no data

  • Unable to Make Remote Calls

    Hi,
    I am trying to access Lotus Notes database through Ultrasearch CrawlerAgent. I am unable to make remote call within Ultrasearch, but i am able to run my program as a standalone. Any ideas?
    - Ramesh

    One More exception...
    WKG-30061: Unable to execute crawler callback
    java.sql.SQLException: ORA-20000: Oracle Ultra Search error
    WKG-50000: internal error, arguments : crawler_callback can not find schedule id
    null
    ORA-06512: at "WKSYS.WK_ERR", line 179
    ORA-06512: at line 1
    Any ideas?
    - Ramesh Natarajan

Maybe you are looking for

  • Had FBI virus and removed.  Now Adobe products wont open.  How to fix

    Open task manager in XP when booting any Adobe software product.  CPU usage skyrockets and Acro32 just keeps increasing and increasing until I run out of memory.  I have tried all sorts of antivirus, malware, rootkits ... to no avail.  Foxit works to

  • SQL Question - Marking multiple columns for given data

    Hello everybody, I have an sql problem that I can't solve. Any comments, examples or resources will be welcomed about situation. I believe 'net is full of examples like this but I really can't realize how to search this. My data is something like thi

  • Missing email functions in iOS 7

    Since changing to iOS 7, I no longer have the reply, trash, flag, or new email, icons at the bottom of the screen when viewing my emails.  Has anyone else had this same problem?  I have no idea what to do.

  • Update of Planning Start Date does not update macros

    I have written a program to update the planning start date in a planning book using function /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB. I have included this in a process chain. The update is immediately followed by a /SAPAPO/TS_BATCH_RUN variant that runs a mac

  • Where is nokia mobile which says made by nokia has...

    Before 2003 it was clearly if you can check where is nokia mobile has been made via IMEI code but after this date the FAC code value fixed to (00)then how for anyone can know exactly the manufactrer country spicially if there is no a clear country na