E72 and Smart Connect, how do I get it to work?

Hi All
Just been given an E72 from work and have read about smart connect, I have it all set up but it won't work, and to be honest I don't really understand what I'm doing!
Can somebody please provide and idiots guide for me.
All I want it to do is connect to my home wifi when at home, the 3G when out and about (or any free wifi if available)
It can't be that difficult but I just can't seem to get my head round it.
Many thanks
Richard

Hi richardj5
Welcome to the forum!
Firstly on a E72 of which history was unclear you do need to ensure that you visit this link and scroll down to the bottom of the page for download:
E72 Smart Connect Patch
You might like to look at this thread:
E72 Smart Connect Issues
You are looking to find that you have set up Smart Connect as a Destination in Menu > Ctrl. panel > Settings > Connection > Destinations > Smart Connect
Taking grschinon advice in my case WLAN is Priority 1 and Network is Priority 2 as here:
Smart Connect screenshot
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

Is "REPEAT ONE" highlighted. If it is, touch it to de-select. Cheers!

Hi my mom recently bought me an iphone 5s in america for my christmas present. She bought only the phone with no plan attached to it because it was $500. I live in ireland and i was wondering would it work here and if not how do i get it to work ?

Hi my mom recently bought me an iphone 5s in america for my christmas present. She bought only the phone with no plan attached to it because it was $500. I live in ireland and i was wondering would it work here and if not how do i get it to work ? She doesnt know that i know about the phone so any advice would be great thanks !!

Allan Eckert wrote:
As far as I know Apple has not started selling unlocked iPhone yet in the US.
The other thing is that the warranty on iPhones is only villain in the country of purchase so it will not be serviced by Apple in Ireland.
bought me an iphone 5s

"Unable to Connect" error continually shows up despite having reinstalled firefox and troubleshooting. How do I get firefox to work properly again? (windows 7)

I turned on my computer and before I could start firefox it said it was updating. When it said it had finished updating and there were no error messages indicating that the update had failed. When I opened firefox it pulled up the last tabs I had open before closing the program. None of the tabs functioned properly and gave me "unable to connect" errors even when I opened new tabs, no matter what the website was. Everything worked properly in internet explorer. I tried restarting my computer and firefox, troubleshooting, restoring firefox, uninstalling and then reinstalling firefox, checking my firewall and the problem persists. I've tried changing my proxy settings according the articles on the support page but nothing has worked. How should I fix this? Firefox is my favorite browser I would hate to give it up.

see: [[Fix problems connecting to websites after updating Firefox|Fix problems connecting to websites after updating Firefox]]
Also possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
https://support.mozilla.org/kb/Server+not+found
https://support.mozilla.org/kb/Firewalls

Airport Express and BT Homehub - how can I get it to work?

Hello, can someone help??
I have an Airport Express and a MacBook. My only use for my Airport Express is purely to play ITunes music through my stereo via my MacBook wirelessly. Therefore I only require my Airport Express to join my current network.
I recently changed my phone and broadband network provider from Talk Talk back to BT. My Airport Express worked fine when I was with Talk Talk, I was using a Belkin wireless router for my network connection which worked without any problems. When I got my Airport Express, it was easy to set up - it joined my Talk Talk network without a hitch.
When my connection transferred to BT last week, I tried to connect up my Airport Express to my new BT Homehub. However when I went into Airport Utility my AX wasn't there. So, I read the guide on the Apple Support site and reset it to factory settings. This then seemed to make it 'appear' in Airport Utility, so I went through the process of setting it up as I did when I first bought it. When I got through to the final stage when it is 'Updated successfully and is now re-starting', the AX icon seems to disappear from the left hand side of the box and eventually I get an error message stating 'Airport Utility was unable to find your Apple wireless device after reinstating: The settings for this apple device have been successfully updated but there was a problem re-joining the wireless network or finding the apple wireless device. You may need to select your network from the airport menu and try again' (Incidentally, this last piece of advice doesn't work)... So, I am not sure what to do. I have tried changing the format of the WEP code I need to enter by adding " in front of the code as well as $ as is the suggestion on the Apple Support site...
Is my AX faulty? Is my BT Homehub (The 'next generation of router' as BT call it) preventing my AX from joining my network?? If anyone can help I would appreciate it, I am not very clued up on these things.... :o)
Thanks

I have now managed to get AX working on my BT home hub. I took my second non-working unit back to Apple in Solihull and got them to test it in store. They agreed it wasn't working. They then tested another unit in store and that did work so I brought that home. It would be worth you doing the same as I got a 10% discount off my next purchase of anything at Apple for my troubles.
I set my homehub security to None (from WEP - in homehub manager/advanced/wireless/security), plugged in my AX to homehub using an ethernet cable, then ran Airport utility and after a couple of runs it finally picked it up. I was able to set the configurations I wanted and 24 hours later it is still working. I set my homehub security settings back to WEP as soon as the AX was configured.
I also installed airport utility on my son's windows laptop and that is now able to print wirelessly as well. So, finally a result.
I would suggest you take your unit back to where you bought it from and get them to test it. If they offer you another one ask for a Mac genius
to test it in store for you first. Also ask them to run through the installation procedure with you. Don't forget to ask for something for your troubles:)
Hope that helps,

Chapters and Play all - how do I get this to work with a one hour project?

Hi
I have a one hour project and at the moment I have it in one track with a Main Menu, Chapter menu and a bridge menu for the loop point.
I have 5 chapters and want 2 functions to happen in my DVD structure:-
1. the Play All function
2. and the Chapters to play each individual chapter and then go back to the Chapter menu when it;s finished.
As my project is now, the play all feature won't work, it is like it's the CHapter menu.
In the past I've had a track for the play all and then separate tracks for each chapter. Is there a way around this - do I have to do that fancy encoding (which I have no idea how to set up.
I have 5 chapters and would love some help to construct this as I don't think the 2 hours would fit on my single layer DVD and it would be a lot more exporting work.
Hope you can help.
Cheers
Margie

You may want to use scenarios in this situation.
click the "add a scenario" button, an add as many scenarios as you have chapters.
Then double click on each scenario option.
You will see a list of chapter appear on the left of your timeline area.
Drag the chapter you want to play solo to the empty list on the right ("scenario markers").
Make sure you then select that chapter marker in the scenario Marker list, and choose "end jump: main menu". Also make sure that your gobal scenario end jump is set to your main menu too.
Then link you buton to that scenario and repeat for the other chapters.
hope that helps.
tee.

How can I get iCloud to work on my IMac?

I have an IMac, iPhone and now a MacBook. I have iCloud working on my MacBook and iPhone. How can I get it to work on my iMac 27" Both computers have Lion for the OS. Blessings...

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Does apple make a printer for iPad if not how dow I get it to work with a HP Officejet 6500A Plus printer?

Does Apple make a printer for the iPad and if not how do I get it to work with a HP Officejet 6500A Plus printer? Thanks

Apple don't make any printers, but there are a number of the printers that are AirPrint-enabled, which you should be able to print to just by the printer and the iPad being on the same wifi network - the models that support AirPrint are listed on this page (the page also includes a bit of troubleshooting at the bottom of it) and it includes :
HP Officejet 6500A e-All-In-One E710a
HP Officejet 6500A Plus e-All-In-One E710n
If your's isn't one of those then you could see if HPs own ePrint app works with it, or there are third-party printer apps such as PrintCentral Pro and Print n Share which might work it

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work?

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears (Nothing will be lost, this is just a "Hard Reset")
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

My iPod Touch 3rd Generation won't connect to iTunes. It keeps saying MobileDeviceService has encountered a problem and needs to close.How can I get it to work?

My iPod Touch 3rd Generation won't connect to iTunes. It keeps saying MobileDeviceService has encountered a problem and needs to close.How can I get it to work?

My iPod was working fine and then my oldest son put in a flash drive to download some music and now my iPod will not connect to iTunes.
Doublechecking something. Are you still back at SP2 for your XP? Or do you have SP3 in place?

My iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error-51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now, my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad?

When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
Help would be much appreciated!

If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one.

Hi guru's in SMART FORMS how i can get subtotals , and page totals

hi guru's in SMART FORMS how i can get subtotals , and page totals plz help me

Hi
check this
Subtotals - Check the link...
<b>Re: Subtotal with Table Node in smartforms can use the PROGRAM LINES node to calculate the page totals in Table node.
Table Node has three sections:
Header: (Triggered once in the beginning of a page)
Create a Program lines node to reset the value of TOTAL to 0.
Main Area (For each row of internal table)
Create a Program lines node to add the Value to TOTAL
Footer (Triggered once in the End of a page)
Display the TOTAL
Note: 1) You can declare the TOTAL variable in the GLOBAL Definitions under GLOBAL DATA.
2) In the PROGRAM lines always pass the TOTAL in both INPUT and OUTPUT parameters
Regards
Anji

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

E72 and Smart Connect, how do I get it to work?

Similar Messages

Maybe you are looking for