E72. Clock displayed twice on the phone screen,in ...

 Clock displayed twice on the phone screen, in the foreground,in Active mode.
 How to remove a clock in the lower right corner of the screen,
or in the upper left of the screen? 
 Too much useless info, not logical.
 Will be corrected in the new phone software, in this regard?
I know - another mode is Standart, only white screen,minimalistic.Without anything.
But I need to see mailbox status screen, unread mail.
Sometimes it's better to chew on than to speak.

 Clock displayed twice on the phone screen, in the foreground,in Active mode.
 How to remove a clock in the lower right corner of the screen,
or in the upper left of the screen? 
 Too much useless info, not logical.
 Will be corrected in the new phone software, in this regard?
I know - another mode is Standart, only white screen,minimalistic.Without anything.
But I need to see mailbox status screen, unread mail.
Sometimes it's better to chew on than to speak.

Similar Messages

  • Screen icons are huge.  I can't read my text messages and the whole screen page won't display.  How do I restore the phone screen to it's natural setting?

    Screen icons are huge.  I can't read my text messages and the screen page won't fully display to view. How do I restore the phone screen to it's natural setting.

    Thanks.

  • Opening a pdf file twice in the same screen

    How can I open a pdf file twice in the same screen so that they are side by side?

    In Adobe Reader try the menu Window > New Window

  • The phone screen is stuck on the loading screen constantly

    the phone screen is stuck on the loading screen constantly

    Hi
    have a look at this uses replys, it worked fro me
    https://discussions.apple.com/people/wjosten

  • While updating the software from 6.1.3 to 6.1.4 on iPhone 5, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in.

    While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
    Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
    Regards.

    Try this
    iOS: Device not recognized in iTunes for Windows

  • Notifications wake up the phone screen even when t...

    Notifications wake up the phone screen even when the phone is in pocket or case. It wasn't the case earlier.
    Using - Windows Phone 8, Lumia 720Problem - Notifications wake-up the screen even when in case(or pocket).
    **I am not talking about the glance feature
    I observed this strange behaviour yesterday. Whatsapp notifications wake up the screen even when the phone is in the case.
    Earlier the screen didn't use to wake up, i could hear only the notification sound. Only when u remove it from the case immediately after notification arrive, the screen turns on. If you don't remove it from the case, it never use to wake up the screen.
    That was a feature, which used the proximity sensor.
    Now this feature is gone. I recently updated to Amber, and I doubt this is due to glance feature.
    Now every time a get a whatsapp message the screen wakes up.
    Vibhor Agarwal

    hi mate,
    as first port of call, try performing a soft reset (pressing the volume down and power buttons together until the phone vibrates). also check the settings inside WhatsApp and also the background tasks in the phone Settings, and re-enable the settings you have for the Glance screen feature.

  • HT4137 help! techo phobe online. I have an unlocked iphone 3 with an unlocked sim. i have plugged the phone into the computer to set up itunes, but it just says on the phone screen "connect to itunes" nothing else is happening/

    help! techo phobe online. I have an unlocked iphone 3 with an unlocked sim. i have plugged the phone into the computer to set up itunes, but it just says on the phone screen "connect to itunes" nothing else is happening/

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • How long does it take to Erase all content and settings on iphone 4G. It's been more than 30 minutes and in the phone screen it's still the circle rotating?

    How long does it take to Erase all content and settings on iphone 4G. It's been more than 30 minutes and in the phone screen it's still the circle rotating?

    thank you. hope not to last more than 1 or 2

  • There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number

    There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number.  Apple please please please fix it as soon as possible and also check why the phone is always restart. I prefer to let us use the iOS 7 until you finished from the IOS 8 because Ios 8 still under construction  there is a tones problems in the system.  And this Will cause undirect problem for the iPhone 6

    There is no apple here in this user to user technical forum.
    Do this Use iTunes to restore your iOS device to factory settings

  • Convenience keys opening the phone screen.

    I have a Curve 8530. The convenience keys are going to the phone screen. The right is entering the letters Hi and the left is entering Yi.
    I've checked the options and its set on camera and voice dial defaults.
    I've tried enabling memory cleaning. I am at a loss. Please help.
    Thanks

    Try restoring as new, i.e. without your backup.

  • HT4211 There is an extra dot on the lock screen of my iphone and on the top bar of the phone screen 5 (ex: "10.20."). What should I do?

    There is an extra dot on the lock screen of my iphone and on the top bar of the phone screen 5 (ex: "10.20."). What should I do?

    If you swipe down from that bar, it will pull up your notification center.

  • Displaying the phone screen on a PC or a video

    Hi,
    I have implemented an application for a Nokia N70 mobile phone (graduation project).
    As i have to present my work, it would be surely very nice if all people attending
    the presentation can see a demonstration of the tool projected on the wall.
    Does any body know if there is a (free) software tool that enables sendig current phone screen in real time
    to a connected computer, so that a connected beamer/projector will display it on the wall.
    Any other ideas which fullfill the described task for the N70 device?
    I am thankful for every help.
    Sincerely,
    huss

    sry but n70 doesn't comes with a TV out option.And to the best of my knowledge there is no software available which lets you transfer the video via cable or bluetooth
    Was this post of some help? Click 'Kudos' star on the right hand side of this post. Your gesture will be highly appreciated!

  • Display Output on the Selection-screen

    Hi all ! Could anybody tell me to how to display the name of the vendor/customer next to the input box on the selection screen area ? e.g. As soon as one presses the enter key after entering the vendor code on 'XK03' transaction screen, the name of the respective vendor is shown right next to the vendor code input box on the selection screen area.

    Hi,
    In AT-selection screen event write the code for getting the the Customer/vendor Name and display it on the screen.
    In-order for the Radiobutton selection process to initiate the 'AT selection-screen' event you need to add the 'USER_COMMAND' option to the parameter declaration. See code below.
    *Code used to Initiate the 'AT selection-screen' EVENT from radiobuttons.
    selection-screen begin of block group with frame title text-s04.
    parameters: p_sel1 type c radiobutton group sel user-command upd.
    parameters: p_sel2 type c radiobutton group sel.
    parameters: p_sel3 type c radiobutton group sel.
    selection-screen end of block group.
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
      IF  p_sel1 = 'X'.
        Write select query to get teh customer/vendor name and display it.
      ENDIF.
    You can use LFA1 or KNA1 to get vendor/customer name

  • Related to Displaying picture on the selection screen

    Hi ,
                      I had a requirement where i had to display a picture on the selection screen, so  i used the methods set_position and load_picture_from_url of the class cl_gui_picture to archive this, but now my selection screen has extended to more than one page because of this if i scroll down on the selection screen the picture is not scrolling it is remaining static to the screen ( i.e. if i place it (10, 10) after scrolling also it is still remaining at (10 , 10) with respect to the new screen) is there any way i can scoll the picture also i.e. it also moves up along with the screen?

    There could be one option : create one screen and load your picture on that screen.
    Within your selection screen, call the screen created above.

  • GDM: How to display it in the first screen (Dual monitors)

    I have a PCI Express video card which i use for video-output for two screens.
    The hing is that when i boot the system up, and gnome gives me the choice for selecting the user and so (GDM), this appears in the secondary screen, which is most of the time switched off.....
    Lets say, like i have two screens: Left one and right one: The left one is the one that has the gnome menus, the system tray of the apps, and the right one is the one i move the apps once opened for watching in a bigger screen (it's a tv): This right screen is the one that displays the GDM.... Is there any setting where i can say GDM to appear in the left screen instead?
    I hope i made myself clear...
    Thanks!!!

    I think that GDM currently decides which monitor it shows up on by where the mouse is, and X starts the mouse exactly in the horizontal center of the full span of the two monitors.. so GDM shows up on the monitor with a wider resolution if they differ, because it contains the center point.
    On other forums, some people say that when X starts, you can move the mouse over to the monitor you want quickly before GDM starts and it will show up there.. someone else said that you can move the mouse, click on the monitor you want, hit enter, and the GDM window moves there. I haven't tested either suggestion yet, but I have exactly what you're describing happen to my monitors at work.. it just doesn't bother me because I keep them both on at once
    I don't know of a setting to tell X to start the mouse to the left or right, or to tell GDM which monitor to display on.

Maybe you are looking for