E72, Compulsory Attributes Missing

i got a e72 yesterday, and since then i have updated it then after i used the ovi store to add music to it its saying compulsory attributes missing. Help please ? This happens when i try to download a app from the ovi store or everywhere else.

Hi,
I am aslo facing same problem. I called up Nokia helpline and they are giving me workaround like configuring into Nokia Email. But i need the solution.
Even same error i am getting while installting Google Map.
Lets see when Nokia will see this matter.
Regards,
Manjeet
Moderator Note: Personal details removed. We kindly ask you not to share your personal contact details publicly on this forum.

Similar Messages

N79 compulsory attributes missing while installing...

Gmail (mail application from Google) was working fine till now .. recently i formatted the phone using *#7370# after doing that when i tried installing the gmail application again it gives me a error saying compulsory attributes missing
Tried formatting again and also updating the phone software but nothing worked out
Is there any solution to make it working again ?

Hi,
I am aslo facing same problem. I called up Nokia helpline and they are giving me workaround like configuring into Nokia Email. But i need the solution.
Even same error i am getting while installting Google Map.
Lets see when Nokia will see this matter.
Regards,
Manjeet
Moderator Note: Personal details removed. We kindly ask you not to share your personal contact details publicly on this forum.

Framed IP Attribute missing in Accounting-Start messages from the ISG

Framed IP Attribute missing in Accounting-Start messages from the ISG for the TAL Users. Account-Logon users and Interim updates have the Framed-IP though.
We have the following command already enabled: aaa accounting include auth-profile framed-ip-address aaa accounting delay-start
Any ideas or workarounds please?
Debug:
Aug 27 19:36:02.213: RADIUS(00000181): Send Accounting-Request to X.X.X.X:1813 id 21647/201, len 406
Aug 27 19:36:02.213: RADIUS: authenticator 23 FC FF 1B AC 01 77 B6 - 89 FE E2 9A 4E AA 0B 32
Aug 27 19:36:02.213: RADIUS: Acct-Session-Id     [44] 10 "000001BB"
Aug 27 19:36:02.213: RADIUS: Framed-Protocol     [7]   6   PPP                       [1]
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 20
Aug 27 19:36:02.213: RADIUS:   ssg-service-info   [251] 14 "NBWAUTHSVC01"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 34
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   28 "parent-session-id=000001BA"
Aug 27 19:36:02.213: RADIUS: User-Name           [1]   22 "[email protected]"
Aug 27 19:36:02.213: RADIUS: Acct-Status-Type    [40] 6   Start                     [1]
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 25
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   19 "portbundle=enable"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 23
Aug 27 19:36:02.213: RADIUS:   ssg-account-info   [250] 17 "SX.X.X.X"
Aug 27 19:36:02.213: RADIUS: Calling-Station-Id [31] 19 "00-15-00-73-XX-XX"
Aug 27 19:36:02.213: RADIUS: NAS-Port-Type       [61] 6   Virtual                   [5]
Aug 27 19:36:02.213: RADIUS: NAS-Port            [5]   6   0
Aug 27 19:36:02.213: RADIUS: NAS-Port-Id         [87] 11 "0/2/0/200"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 46
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   40 "remote-id-tag=020a00000a050001000800c8"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 36
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   30 "vendor-class-id-tag=MSFT 5.0"
Aug 27 19:36:02.213: RADIUS: Service-Type        [6]   6   Framed                    [2]
Aug 27 19:36:02.213: RADIUS: NAS-IP-Address      [4]   6   X.X.X.X
Aug 27 19:36:02.213: RADIUS: Ascend-Session-Svr-K[151] 10
Aug 27 19:36:02.213: RADIUS:   39 45 41 39 39 36 44 44          [ 9EA996DD]
Aug 27 19:36:02.213: RADIUS: Event-Timestamp     [55] 6   1346096162
Aug 27 19:36:02.213: RADIUS: Nas-Identifier      [32] 24 "LAB-RAS01"
Aug 27 19:36:02.213: RADIUS: Acct-Delay-Time     [41] 6   0
Thanks in advance.

It seems you already have tac case opened for this issue? Let me know if that is not the case.

Error. Required Attribute Missing

Hi,
I had the following code:
<?xml version="1.0"?>
<!DOCTYPE wml PUBLIC "-//WAPFORUM//DTD WML 1.2//EN" "http://www.wapforum.org/DTD/wml12.dtd">
<%@ page session="true" %>
<%@ page import="java.io.*"%>
<%@ page import="java.sql.*"%>
<%@ page import="java.util.*"%>
<%@ page import="javax.servlet.*"%>
<%@ page import="javax.servlet.http.*"%>
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String url = "jdbc:odbc:DataLink";
Connection con = DriverManager.getConnection(url);
%>
<% Statement stmt = con.createStatement(); %>
<%! String admin, module, grade, displaySQL; %>
<%
admin = (String)session.getAttribute("UserAdmin") ;
displaySQL = "select * from Exam_Result where AdminNo = '"+admin+"' ";
java.sql.ResultSet columns = stmt.executeQuery(displaySQL);
response.setContentType("text/vnd.wap.wml");
%>
<wml>
<card id="Result" title="Exam Result">
<do type="accept" label="Main menu">
<go href="MainMenu.jsp"/></do>
<p align="center">
<table border=1 align="center">
<tr>
<td>Module Code</td>
<td>Grade</td>
</tr>
<% while(columns.next()) {
module = columns.getString("Module_code");
grade = columns.getString("Grade");
%>
<tr>
<td> <%= module %> </td>
<td> <%= grade %> </td>
</tr>
<% } %>
</table>
</p>
</card>
</wml>
<%
columns.close();
stmt.close();
con.close();
%>
When i run using nokia simulator, it display required attribute missing.
Can anyone help me to solve the error?
Thanx in advance....

May be the wap phone has some differences with explorer that IE. For it connect to gateway first,then
the gate connect to you web server. Perhaps the
session (you are using) cannot be kept with wap phone.
You can using url parameters to keep special customer's
info,and create a timer in your web server to trace special customer's id or name. In this way,you can avoid using session instance. --try it and good luck

HL7 Outbound runtime error: "Mandatory attribute missing: Standard"?

I am trying to develop an outbound HL7 v2 solution. I have a composite that picks up an XML message, transforms it to a HL7 v2 XML, popuates b2b. properties and hads the payload over to teh B2B. The partners and partnerships are, seemingly, OK. Yet, I get a runtime error "Mandatory attribute missing: Standard". What am I missing?
The error (one of them anyway) looks like that below.
Thanks in advance for any pointers that anyone may be able to offer.
Regards
Michael
[2010-06-25T09:13:34.437+10:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@157bfbf] [userId: <anonymous>] [ecid: 0000I_gFDdOESOYjLpyGOA1C8Mno0005_G,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 3df7286553d16a99:75be56fb:129629445e0:-7fd3-000000000000004e] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>C0A8A4811296C3CD78A000001FFF4A70</correlationId>
<b2bMessageId>34373438353435383437393236303338</b2bMessageId>
<errorCode>B2B-51507</errorCode>
<errorText>
<![CDATA[
Error Brief :
XEngine error.
]]>
</errorText>
<errorDescription>
<![CDATA[
Error :
Mandatory attribute missing: Standard.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="b2b.messageId" value="34373438353435383437393236303338"/>
<parameter name="b2b.documentTypeName" value="ADT_A01"/>
<parameter name="b2b.documentProtocolVersion" value="2.3.1"/>
<parameter name="b2b.documentDefinitionName" value="ADT_A01_DocDef"/>
<parameter name="b2b.documentProtocolName" value="HL7"/>
<parameter name="b2b.messageType" value="1"/>
<parameter name="b2b.fromTradingPartnerId" value="LocalHL7Receiver"/>
<parameter name="b2b.fromTradingPartnerIdType" value="Name"/>
<parameter name="b2b.toTradingPartnerId" value="127.0.0.1"/>
<parameter name="b2b.toTradingPartnerIdType" value="MLLP ID"/>
</errorDetails>
</Exception>
[2010-06-25T09:13:34.437+10:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@157bfbf] [userId: <anonymous>] [ecid: 0000I_gFDdOESOYjLpyGOA1C8Mno0005_G,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 3df7286553d16a99:75be56fb:129629445e0:-7fd3-000000000000004e] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUE

Answering my own question - I needed to populate the Standard attribute of the outbound message with teh string HL7. I populated Version attribute with 2,3,1 just for a good measure. Things now work.

Error CL_TAO_GUI_SESSION_SM- Create: Mandatory Attribute missing for Technical RFC destination

hai
We have installed solution manager and CBTA for test automation. For SUT , We have created Technical RFC for development client and quality client
as TST_BID_CLNT220 and TST_BID_CLNT_909 respectively. Similarly SMBID_CLNT_220 and SMBIQ_CLNT_909 are the business RFC destination to connect SUT.
Now I have created test System data container which have both target system (Quality and development) . I have also created Test profile
for both . In the Test Profile I have mentioned Techinical RFC name , Test profile name, business user and password.
I have record va01 tcode in development client. The same script is used for quality also .
I am able to execute the script in development . But when I execute for quality it is giving following error
Error CL_TAO_GUI_SESSION_SM->Create: Mandatory Attribute missing for Technical RFC destination TST_BIQ_CLNT909
Can any one help me . Pls tell me whether I followed the steps correctly
Regards
Jaya

Hi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann

Attribute missing in : 'url'

Hi Tim,
I am getting following message when I try to run the BI Publisher report.
Attribute missing in : 'url'
Please help me out.
Regards,
Vara

How are you trying to run the report? From where, which format?

5800 XPRESS MUSIC "COMPULSARY ATTRIBUTES MISSING"?...

I've downloaded games from Gameloft.com and had no problems. Since I've tried to download games from live.vodafone.com it gives a message "compulsary attributes missing" just before the downloading is finished. Can anyone help with this?

Well for your information, NOKIA has removed the option of TV-out cable and functionality, spare stylus and protective case since SEPTEMBER '09. So your box now contains what NOKIA has decided for it. If it has plectrum stylus, headset with remote control and one stylus that's embedded in the back of phone cover, and DVD,then it's not missing anything.

DMEE - error in conditions for node: node attribute missing for ref. ID

Hi,
I've got an error 'error in conditions for node XXX: node attribute missing for ref. ID XXXXX' - may I kindly ask you to suggest where this attribute need to be specified.
thanks in advance.
BR
Renatas

Hi Renatas ,
When using Reference IDs for Conditioning in DMEE you should give node attribute in the 2nd field of the conditioning ....
look the below example
Arg1-1 Arg1-2 T O Arg2-1 Arg2-2 T O
E2E 1A 3 = SPACE 1
DMEE: node attribute as a comparison value
Definition
Node attribute to be used in a condition. The following values are possible:
1: contents in output format
1A: contents in internal format
2: length
3: counter reading
4: counter reading of segments per file (only for DMEE format tree)
5: counter reading of segments with CR/LF (only for DMEE format tree)
Regards,
Komaravolu

Interactive Report Attributes: Missing a column?

This is for Application Express 3.2.1.00.12
I'm working on a report with the columns pulled in a SQL statement in the Region Definition section of the Interactive Report Attributes screen. We want to alter the column names so they are more user friendly, so on the Report Attributes tab, I'm looking for the column name we wish to alter, but it is not showing up. Now, in the final report, the column is visible with the header from the name of the column from the database, so the system is aware of the column and can display it, but for some reason we can't see it in the Report Attributes tab.
Why would a column be invisible or inaccessible in the Report Attributes tab? There are 100 columns displayed in the Report Attributes: Column Attributes section. Is that the reason I'm missing some columns; 100 is a hard column limit on that page?
Thanks in advance for all help you can provide.
Matthew Nagler
Edited by: user13579247 on Jul 20, 2011 10:45 AM
Edited by: user13579247 on Jul 20, 2011 12:20 PM

Hi,
You are almost right place. You need click icon before 100th column name, order to go screen where you can edit column attributes.
In that screen right top is buttons (Cancle, Apply, < and >)
Regards,
Jari
Edited by: jarola on Jul 21, 2011 5:43 PM
It might documentation guides you to right screen
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/app_comp.htm#sthref978
>
To access Column Attributes:
1. On the Workspace home page, click the Application Builder icon.
2. Select the application.
3. Select a page. The Page Definition appears.
4. Under Regions, click Interactive Report next to the name of the report region you want to edit.
The Interactive Report Attributes page appears with the Column Attributes section at the top of the page.
5. To access the Column Attributes page, click the Edit icon next to the appropriate column Alias.
>
Edited by: jarola on Jul 21, 2011 5:44 PM

Attribute missing in data model

Hi,
I recently created a Model project. The App module of the model project has an instance of a View Object. There is an attribute in the View Object that is of a custom type.
In the UI project, when I refresh my data object, I am not seeing that particular attribute. I am seeing all other attribute. ADF version
11.1.1.3
Can someone help me figure out what the problem could be?
Edited by: 926653 on Sep 18, 2012 8:31 AM

The attribute is added to the VO. The VO is added to Application Module. The problem is - in the "Data Model" view that shows all instances listed in data model, it does not show me the attribute.
The only difference that I can notice between this attribute and the other attributes that show up is is its data type. The missing attribute is of data type that is a custom one. Others have one of the jbo classes as their data type. I am not sure if it matters.
Do you have any suggestions on what I can check?

CRM50: Pricing attributes missing from TREX (PRC_PR00_004*)

Hello, we use CRM5.0 with ISA / TREX7
We are having the following problem:
In our dev and test system all worsk fine.
In our Prod system, the "list prices" do not show on the B2C site.
It was traced backed to this problem :
After replication of the catalog, when we look at TREX (SRSE) we can see what id wrong, the attributes: PRC_PR00_004* (PRC_PR00_004, PRC_PR00_004_CURRY_QTY, PRC_PR00_004_SCALETYPE ,PRC_PR00_004_UOM) are all missing from the TREX.
We also see this in transaction SRMO, in the "doc. attributes" area, we can see the same PRC_* attributes are missing as well.
The question is how do we fix this, such as those attributes are added (why aren't they there), so that we can get them replicated.
If you know which transaction/where to look at, this would be greatly appreciated and rewarded, especially since this issue prevents us from going live.
Thank you.

Actually we found the problem finally.
PR00 had not been setup properly in the catalog variant (catalog management).

Exchange 2013 homeMTA attribute missing

Hi all,
I noticed if I create a user mailbox on exchange 2013 and check the users properties in ADSI Edit, the homeMTA attribute is missing? Is this normal?
If a user mailbox is create on exchange 2007 I can see the homeMTA attribute. But as soon as I migrate the mailbox over to exchange 2013 it disappears?
Why is there no homeMTA attribute for mailboxes on exchange 2013?
Environment:
Windows Server 2008 SP2 Domain Controller
Exchange 2007 + SP3
Exchange 2013 + CU3
Thank you

Hi,
We are in the process of configuration BES 5 with 2013 and got stuck during the installation. We are new to Exchange environment as we are now migrating from Lotus Domino. We have followed the same documents mentioned by Steve but could not succeed with
the installation as it is stuck at MAPI setting page. We also could not complete few steps mentioned in the pre-requisites and was told by our service provider that we are getting stuck because of this missing pre-requisites. We were not able
to complete the Task1 and Task 3 as mentioned in
KB33413. In Task 1 we are not able to set the value for IISAuthenticationMethods {Basic, Ntlm, Negotiate}Ntlm .
Have applied the commands as advised at the end of the Task 1, restarted the services and server but no luck. It is showing blank in our case. In Task3 we were having the
HomeMTA attribute as not set and was supposed to copy the attributes from the other two fields. Would like to clarify how we could copy these two values to one field, is it one after another with a comma or space?
Also, we were told by the Service provider that they have limited support for Exchange 2013 SP1 version. Can somebody please verify if it works with the same? Kindly help.

Attribute missing (Attributes and management agents)

I'm new to FIM, and even as I've read and searched the web - I can't quite figure this one out (don't have a proper training environment yet so I can test this).
I've got a case where one of the Management Agents is missing data for a employee. It's missing the employee's Role. (Like "Head of dept"). Looking at the metaverse object properties for the given management agent - role is not a part of the attributes
listed. However, for another management agent, role is defined in the attribute list. Is the trick to add the attribute to the list of attributes for the MA missing it - or is it something else I need to consider as well?

Employee role comes from the management agent so if a SQL view is your target source for this data you need to make sure that you have it in the schema of the management agent. From there you map it to a metaverse attribute such as job title or your
could create something custom. The key is to make sure the data is in the source and when your import the data in to the the connector space via a full import that you can see it. From there it is a simple matter of mapping it into the metaverse
attribute.
Scott
If this post has been useful please click the green arrow to the left or click Propose as answer

NIMAX acquisition attributes missing

Hello,
i am working with point grey camera "Chameleon". Everything works but one thing. In NIMAX under camera attributes there are some missing ones. The main problems is that as the attribute control is mising every time the labview try to capture an image it obtains default parameters from NIMAX and therefore set the attribute to 0. Which prevents me from obtaining any data. So the question is : is there are way to fix NIMAX or should i try to somehow set camera atributes within labwiev?

Bjanu,
This issue is actually a result of how the Point Grey Chameleon interfaces with the computer. In order to successfully have the DirectShow compatible camera work with LabVIEW, you will need to manually register the DirectShow DLL's on your computer. A more descriptive link on how you can actually do this can be found on the Point Grey website here:
http://www.ptgrey.com/support/kb/index.asp?a=4&q=310&ST=directshow
Hopefully this gets you up and running and allows you to change your camera attributes.
Regards,
Keith M.
Applications Engineering

E72, Compulsory Attributes Missing

Similar Messages

Maybe you are looking for