E72 - dead screen?

My E72 has started playing up recently. First it wouldn't recognize when I remove/insert earphones and would permanently think earphones were in, so couldn't make calls etc because I wouldn't be able to hear anything. Now the screen seems to have stopped working. I get lights on the keypad and can connect it to my pc but can see nothing on the screen, is completely blank. I noticed just before this happened it would seem to struggle to come off screen saver when I unlocked the keypad i.e. would take a long time and the screen would look messed up for a few seconds before coming round. I'm also pretty sure i've noticed a red light flash where the flash is once or twice since its stopped working.
I tried updating firmware to sort the earphone problem and the screen has died since then. Tried hard resetting to to avail. Have only got this phone relatively recently to replace another nokia that failed... really not happy about this...

Cj2150 wrote:
My E72 has started playing up recently. First it wouldn't recognize when I remove/insert earphones and would permanently think earphones were in, so couldn't make calls etc because I wouldn't be able to hear anything. Now the screen seems to have stopped working. I get lights on the keypad and can connect it to my pc but can see nothing on the screen, is completely blank. I noticed just before this happened it would seem to struggle to come off screen saver when I unlocked the keypad i.e. would take a long time and the screen would look messed up for a few seconds before coming round. I'm also pretty sure i've noticed a red light flash where the flash is once or twice since its stopped working.
I tried updating firmware to sort the earphone problem and the screen has died since then. Tried hard resetting to to avail. Have only got this phone relatively recently to replace another nokia that failed... really not happy about this...
How did you reset?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

External monitor for macbook pro with dead screen

Macbook pro built in 2007 has a dead screen but is otherwise ok. Connected external monitor displays only the astral starburst screen on all macs. How can I get the monitor to display my desktop if I can't see the macbook screen?

Connected external monitor displays only the astral starburst screen on all macs.
Then it is working as designed.
By default, the external screen is combined with the built-in screen into an Extended Desktop, as seen in the Arrange tab below. You need to (Gather Windows) to get all controls on all displays, then drag the tiny white MenuBar to the display where you want it to appear. Then things will begin to operate as you expect.

How do I transfer files from PowerBook to MacBook. (dead screen PB)

Problem is, the PowerBook 1400C has a dead screen. So I can
boot it up, but that's it. Is there a way to hook up the MacBook
to the PB so the PB is seen as an external hard drive? There
are no firewire or usb ports on the PB 1400. Just want to get
some documents off of it.

I think you'll have to take the hard drive out and install it in an external enclosure.
Target disk mode won't work on Macs that are old enough to lack a native firewire port. And if the screen is dead, I don't see how you could connect via ethernet and enable file sharing.
Edit: From googling, I see that a video out port was optional on (some?) PB 1400's. If you have one, can you get it to boot with a monitor? Then file sharing would be an option.

My i Pod touch still works but it has a dead screen! How can i fix this??!!

I just got the iPod for Christmas last year but recently my little brother dropped it and it became a dead screen! How can i fix this problem?! HELP!!!!!!!!

Apple will exchange your iPod for a refurbished one for this price (for 4G iPod, $199 for 64 GB and $99 for the others). They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

NVRAM issues, then dead screen

My girlfriend's Macbook Pro, a 2009 Core 2 Duo 2.16ghz, went totally dead about a month ago. After doing some research, I found that resetting the NVRAM (Command+Option+P+R) seemed to get it running again. We'd have to do this once a week or so. And while I assumed the problem might get worse, I hoped that it would stay ok.
Of course, it didn't. Recently, it went dead, and when we reset the NVRAM, the computer seemed to start up again, but with a dead screen. I tried to output video via DVI, but that was dead too.
It's an old laptop, and I'm inclined to say that it's a lost cause - however, it died in such an odd fashion that at the very least, i'm curious about what was going on. Does anyone have any insight? FWIW, it had a 3rd-party battery in it, and I noticed that the NVRAM wasn't resetting when the battery was out and the computer was plugged in.
Thanks!
Tyler

vhanudux wrote:
FWIW, it had a 3rd-party battery in it, and I noticed that the NVRAM wasn't resetting when the battery was out and the computer was plugged in.
You nailed it, Apple can change OS and firmware and the cause problems for third party battery makers.

6120c dead screen

My 6120 classic will have a dead screen after hours of inactivity, phone still on as I can receive phone calls (key pad lights on)? any help ?

Please make a backup if you didn't do it yet, when the screen still on. This procedure will format your phone & put it to factory default & install fresh firmware.
This procedure works with S60 phones only:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. When the message 'Formatting' appears on the screen, release all of the buttons.
Goodluck!
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

6030 dead screen

I have Mobile 6030 with dead screen, i can't see any thing, i want to copy all the contacts from the Phone to the SIM card, can any one help me the way to do that with steps as i can't see any thing.
I want someone to tell how , like press menu then press 3 and scroll down twice and so on
it URGENT for me

Yes, it's possible that your external display is working just fine but that there may be a problem with the screen. How recently did you have the screen repaired? There should be some sort of warranty on the repair (if done by Apple, 90 days).
Did the Apple tech tell you why he/she suspected that you have a bad logic board? If your GPU were damaged you wouldn't be able to view the external display. And the GPU on your model is an integrated GPU, not a discrete GPU.
Call back about the logic board replacement suggestion, at least.
Clinton

Can I transfer files to a machine from a machine w/a dead screen?

Question:Can I transfer files to a machine from a machine w/a dead screen?

If the MBP with the dead screen is otherwise functional, start it up in Target Disk Mode (Powering it up holding the T key/Firewire connecting the two MBPs). If the other MBP sees the other MBP, you can click on the HDD icon and transfer files.
Ciao.

Dead screen, laptop locked in Safe Mode with no HDMI driver for external monitor

Hi,
Background: This is a Windows 8 pre-loaded notebook, I have updated to 8.1 (some months ago) via the Store.
I recently had the dead screen that appears quite common with HP notebooks.
I connected an external monitor, notebook was fully functional.
Backed up all contents, then updated graphics driver, no improvement.
Then went into msconfig and forced boot into safe mode...
Now, I cannot control the notebook at all because I can't see anything. At this point I am just trying to get control of the notebook so I can wipe it, and sell it to a repair place, or as a notebook that works fine with a docking station or external monitor.
Questions I have:
1. WITHOUT SEEING THE SCREEN (dead) is there any way to get it to boot back to Windows Normal mode, or any other HDMI-driver enabled mode?
2. As an alternative is there any way I can get it to boot from a USB to any operating system so I can wipe the HDD and start again?
3. Would (2) even work if I need a HDMI driver to operate the notebook - would it be possible to reinstall an OS with a dead screen, because I would need to be able to run an external monitor?
4. How do I find my Windows Product Key without access to the notebook (can HP help here, from my notebook serial #)?
5. Any way to perhaps mount the HDD externally in order to manually edit the boot config to return it to Windows Normal booting?
Grateful for your comments. Remember my objective is NOT TO FIX IT, just to get it to drive an external monitor again so I can part with this notebook with some kind of financial return.
Dom

Hi @Dom_Oz ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see that your display quit and you connected an external monitor and it was functioning well. You backed up all your data and updated graphic drivers but there was no improvement. You booted into safe mode and now both screens are blank.
Since both screens are blank when you booted into safe mode, I would try a Performing a Hard Reset or Forced Reset.
to try and bring back the external monitor.
If that does not work, can could try to do a recovery Performing an HP System Recovery (Windows 8)
The Windows product key is tattooed in the bios and is hidden, but if you do a recovery it should automatically get picked up.
Yes you can try booting to an OS on a USB stick to wipe the hard drive.
Yes you can remove the hard drive and install it in an external case and then edit as you wish or format from there.
If you edit the boot config and manage to have Windows reboot, I would do a factory recovery, this will format the drive and return back to its original condition.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Dead screen, looking for screen sh

I have a Zen Xtra with a dead screen. The backlighting works, but I do not get any text on the screen. Everything else works. What I am looking for is screen shots that will take me step by step throuh the different screens, ie, to pick an artist I press menu (pick of what screen looks like), press select button once, get this screen (pic of screen), press select button down twice to get to artist (screen shot) etc. I have an idea, through trial and error how to play some music, but need to know how to get to albums, artists, play all, and play mode. Any help is appreciated. Thanks.

Since many have viewed this (But no one has replied), I will reply to myself. I took the MacBook Pro to the apple store. They took out the battery, which was working fine by the diagnostic, and found that somehow, the traChpad had tightened itself in terms of sensitivity. They adjusted the trackpad sensitivity, buttoned it back up, worked like new, no charge!!! If you experience this problem, take it to the apple store, let them adjust the track bar, you'll be off and running in 15 minutes...

Can't get ibook with dead screen to display on a TV

My G3 ibook has a dead screen. I want to make it work like a desktop by using a TV as an external monitor. I have a video output to TV connection adapter cord. I can power up the ibook and I can hear the music CD playing... that makes me think everything is working except for the screen. But no picture comes on the TV after boot up. I have a feeling that a setting called "Video Mirroring" needs to be activated, or no output will go to the TV through the combo S-video/composite adapter cord. But without the ability to see any display on the ibook, how can I activate this setting?, is there an apple command that can be made without seeing any display on the ibook? Please help with any ideas.

I have a video output to TV connection adapter cord. I can power up the ibook and I can hear the music CD playing...
Just to be absolutely clear, which "adapter cord" do you have? If you have the Apple A/V Cable or an iPod A/V Cable plugged into your headphone port, you won't get video through if you have an 800MHz G3 iBook. You will need the Apple Video Adapter (and an s-video or composite video cable). As you've discovered, you can keep your "cord" to get the audio from your headphone port to the TV, though.
-Doug

U430 Touch - Dead screen?

Hello,
My U430's screen recently stopped working, and I would like some advice on what to do to fix it. The laptop works fine otherwise, only the monitor doesn't work.
Here's what I've tried so far and what I've found out:
Powering the laptop off and on again - no change
Connecting the laptop to another monitor via HDMI - the laptop is fully functional, and the computer does not recognize the dead screen, only the other monitor
I also noticed crackling sounds when I opened my laptop previously, and the hinge appears to be offset. This leads me to believe that the cable connecting the screen to the laptop got caught and/or cut by the hinge - especially with the rest of the laptop working properly. Is there a fix I can perform manually, or do I need to send the laptop in for service?
EDIT: This happened today (13 February) during normal use of the laptop (sitting on a desk) after 5-10 minutes of normal use. The screen went black without any warning, and this was the first indication of any issues with the screen - it had worked perfectly until this point.
Solved!
Go to Solution.

Lenovo has concluded an investigation into reports of hinge mount failures on U430 Touch and U530 Touch laptops. If the laptop has not been dropped or otherwise damaged, and is under warranty, please contact Lenovo Service for support.
Thank you,
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

6120 dead screen

My 6120 will have a dead screen after hours of inactivity, phone still on as I can receive phone calls (key pad lights on)? any help ?

Turn the phone off and back on by removing the battery.
Then try doing a software update on the phone..
http://www.nokia.co.uk/A4777088
Backup your stuff first though!
Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
Current: Nokia N900!

My apple laptop wont start up. I get the music of opening and then a brief flicker of light then a black dead screen

my mac laptop wont start up. It briefly plays the starup music, then a brief flicker of light followed by a black dead screen.
The power is connected so no trouble there...

I hope the link helps and Thank You for the reply.
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

20" G4 dead screen :( please help

Hi guys,
A friend of mine has given me what he thought was a dead iMac G4, he thought it was dead as nothing appears on the screen. I've bought and connected a mini vga to VGA on it and run it through my 22" Samsung and it booted to the CD so I've installed Leopard on it and upgraded the ram to 1.25Gb, I'd really like to get the screen back working on it and have tried various things, reset the PRAM and the PMU but no joy. I'm thinking it could be the inverter anyone got any other suggestions or ways I could prove what is wrong as I don't want to buy the inverter to find out it is a dead screen although the screen backlight appears to work. I'm based in the UK so finding an inverter for a 20" may be difficult ??
I guess I could try fitting my 22" screen to the arm instead for turn it into a Mac Dome
Thanks in advance.
Pete

Hello schwebs900 and Welcome to Apple Discussions ...
<<I know I can boot off of the install disc, but does it matter if I use the install disc for my iMac?>>
 System Specific Disk Restriction note:  It is important to note, that installation of operating systems from a different Mac model will not always work right. Use only the disks which come with the Mac in question. Mac Update FAQ's: http://www.macmaps.com/upgradefaq.html#SYSTEMSPECIFIC
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but is still available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).Go here:
http://support.apple.com/kb/HT2571
If you can find someone with another Mac, you might be able to back up your important files using Target Disk Mode, instructions here: Transferring files between two computers using FireWire
To transfer files using FireWire:
Shut down the first computer and leave the second computer on.
Connect the two computers using a 6-pin to 6-pin FireWire cable. (If both computers have higher-speed FireWire 800 ports in addition to the standard FireWire 400 ports, you can use a 9-pin to 9-pin cable with the FireWire 800 ports to transfer data at higher speeds.)
Open System Preferences, click the Startup Disk, and click Target Disk Mode. (Or, start up the first computer while holding down the T key.)
A disk icon for the first computer appears on the desktop on the second computer. Drag files to and from the disk to transfer them.
When you finish, eject the first computer's disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
Push the power button on the first computer to shut it down and disconnect the FireWire cable.
Carolyn

E72 - dead screen?

Similar Messages

Maybe you are looking for