E72 - Gmail synch set to hourly but appears to be ...

Hi,
Just bought a nokia E72 and started using Gmail on Nokia Messaging. I have set the synch schedule to hourly between the hours of 10am and 9pm but I am still getting my emails through in realtime and I appear to be constantly connected. Any ideas as to why this is occuring?
Many thanks in advance.

Hi lofive,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue with devices not being able to connect to a Personal Hotspot created by your iPhone. Try the suggestions in the article linked below, it provides a lot of great troubleshooting tips that will resolve most issues like the one you’ve described.
iOS: Troubleshooting Personal Hotspot
I hope this helps.
-Jason

Similar Messages

  • Planning form some columns set to hide but appear in SmartView

    I have a Planning form with about 30 columns. Some of these columns are set to hide. The hidden columns still appear in SmartView. How can I get them to hide in SmartView?

    Hi,
    May I ask you why you have these columns in the form that you actually want to hide?
    I was able to recreate your problem. In web the columns are hidden but in Smartview it comes up.
    Regards,
    Amol
    Edited by: AmolDatt on Apr 29, 2009 11:20 AM

  • My spreadsheet is set for landscape but shows portrait in "print view".  How do I fix this?

    My spreadsheet in Numbers is set for landscape but appears as portrait in "print view".  What am I doing wrong?

    Where are you seeing "print view?" Using the little paper icon at the bottom left of your document turns print view on & off & that is also where you can set portrait or landscape. The default is landscape.

  • I clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    i clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    On a 4S the erase should take under 10 seconds. As it has taken longer there must have been data corruption on the phone. Reboot it by holding HOME and SLEEP until an Apple logo appears. If it has not be cleared of all data connect it to iTunes and Restore it. Then erase again.

  • I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    Hi, bamboo64. 
    Try closing all open applications in multitasking and power cycling the device.  Once this is done test the results.  If the issue persists, I have included a couple troubleshooting articles that I would recommend going through. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error.  Checked and no yellow triangles, music on computer,  any ideas.

    Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error.  Checked and no yellow triangles, music on computer, and all resources on computer,  any ideas??

    Hi
    And
    • free space on Start-Up hard disk ? How Much ?
    • Brand and type of DVD used
    • Burn Speed ?
    • Did You try to first do a "Save as a DiskImage" ? If so - Did it work ?
    Yours Bengt W

  • My daughter disconnected her iPod nano from the lead before ejecting the device.  It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

    My daughter disconnected her iPod nano from the lead before ejecting the device.  It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

    Restoring the iPod will do nothing to his iPhone.
    When you restore it wipes the iPod clean no matter what computer you use.
    The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
    If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766

  • How do I enlarge the font in messages received and sent?  I have it set at "13", but it is very, very small on my screen.  I can't seem to change the appearance of the tool bar even when I try to "customize".

    How do I enlarge the font in messages received and sent?  I have the font set at "13", but the appearance on my screen is very, very small.  When I try to "customize the toolbar" to look like the tool bar above this message, I am unable to do so.  Please advise.  Thank you.

    Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
    I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
    Thanks for your help!

  • TS1702 i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

    i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

    That number is for an apple server in the UK that is used for iMessage activation.  A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number.  I suggest you turn iMessage off.  In settings/phone turn on dial assist.  Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage.  Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

  • New ipad3, just getting started, trying to get on facetime but when I try to set up a message appears saying my email address is already in use. I am now stuck and I can't get any further! Help please!

    New ipad3,just getting started,trying to get on FaceTime but when I try to set up a message appears saying my email address is already in use. I can not get any further, help please

    Millietrixie-
    Are you trying to call yourself to test FaceTime?  If so, you must have a second E-Mail address registered with your Apple ID.  In other words, there must be a different E-Mail address on each unit.
    Fred

  • Every time I connect my iPhone 4s to iTunes on my Mac, it tries to set up my phone as a new one/restore from back up. I have it all set up already, but it keeps appearing. What do I need to do to stop this?

    Every time I connect my iPhone 4s to iTunes on my Mac, it tries to set up my phone as a new one/restore from back up. I have it all set up already, but it keeps appearing. What do I need to do to stop this?

    Hello there, deelish.
    A great Knowledge Base article that has some valid information is:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    The pertinent section for you would be:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues.
    Thanks for reaching out to Apple Support Communities!
    Cheers,
    Pedro D.

  • HT5022 After setting up, no longer appears in either version of Airport but DOES WORK! Why?

    After setting up, no longer appears in either version of Airport but DOES WORK! Why?

    Hey Bob...
    So far, using wireless only on the AirPort Extreme... (No Ethernet Devices or USB connected)
    Yes to "create a wireless network".
    My Cable Modem is the latest Motorola Docis 3, The APE is M8799LL/A Model A1034
    Yes both versions...
    More detail.... If I reset the APE, it shows up just fine in 5.6.
    I  go through configuration. I choose APE name, new wireless network, enter Wireless Network name and password.
    Set for WPA.
    Anyway, Airport 5.6 claims success and restarts APE. Never finds it again, (unless I reset it again. Went thorugh this process 3 times with same results... )
    Anyway. the utility cannot "see" APE but my devices, (iPads, iPods, iPhone, Macbooks, Android devices as well), All can see APE and connect to it.
    So, NOT major issue except that in order to make ANY changes to the APE, I must do a reset..
    It's just WEIRD!    

  • Suddenly after my browser was asking for save&quit for multiple tabs, it stopped this to appear again.so i tried to set it again but no browser.warnOnRestart

    I lost the option of save and quit for the multiple tabs when closing, so i tried to set them again but i couldn't find browser.warnOnRestart to set it to true value.
    How can i get it back?

    Make sure that you do not run Firefox in (permanent) Private Browsing mode (Never Remember History).
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    *Deselect: [ ] "Always use private browsing mode"
    You can check the browser.sessionstore.* prefs on the <b>about:config</b> page and reset user set (bold) browser.sessionstore.*prefs to the default value via the right-click context menu to make sure that Session Restore is enabled and working properly.
    *http://kb.mozillazine.org/Session_Restore
    *https://support.mozilla.org/kb/restore-previous-session

  • Firefox homepage changed. Lost Icons for Gmail, YouTube, etc that use to appear on the home page. How do I get them to appear back on the Firefox homepage?

    A week ago, my Firefox homepage changed and I've lost the ability to have Gmail, YouTube, etc appear at the left top of the homepage. I tried to reset by going to settings and set the default but still can not figure out how to get Gmail, YouTube, etc to appear on the homepage.
    Thank you,
    Julia

    Is your home page now https://www.google.com/ ?
    If you are missing the traditional "black bar" at the top of the page, that has been replaced with an application button on the right side that looks like a grid of small squares. Some creative developers have posted add-ons to restore the old bar. I haven't tried these myself:
    * [https://addons.mozilla.org/en-US/firefox/addon/proper-menubar/ Proper Menubar]
    * [https://addons.mozilla.org/en-US/firefox/addon/you-google-bar/ +You Google Bar] - reviews indicate some problems

  • .AI CS6 Font is set to black but shows up Grey. Greyscale is set to RGB.

    Hi, I'm using .AI CS6. I am trying to type something and the font color is set to black. But only shows up grey. But all other colors work fine. Document color is set to RGB, not CMYK, or Greyscale. I'm totally at a loss... My customer is needing this tomorrow. So a really fast correct reponse would be FANTASTIC. Been woring on this artboard for a little over an hour and can't do what I need done. I open new Artboards and the same problem persists.. I soo have no idea what the problem is....
    Please someone HELP ME...
    Thanks,
    HolyGraphixWarrior

    Select type with hollow arrow tool as an object
    Set fill color to none
    If did not change to inivisible, select all charchters with type tool I beam, and set to none
    In appearance palette add new fill, set to RGB 255, 255, 255
    Make sure your transprancey is set to 100%, and color is set to 100%

Maybe you are looking for

  • Recovery Window-Based Retention VS Redundancy-Based Retention

    Hi Experts, We'd like to know your take on the use of Recovery Window-Based Retention Policy e.g. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;against the use of Redundancy-Based Retention Policy, e.g. CONFIGURE RETENTION POLICY TO R

  • Help on Oracle Report sort option!

    Hi, My query in Q_1 of Oracle report is select &a_code ori_code ,&a_desc ori_description from &a ori_lup order by &b. When click on OK button it says ORA-00936: missing expression select ori_code,ori_description from ori_lup order by ==> I am not abl

  • Copied  using ImportNode,  copied document is not opening in xml editor

    Hi I am copying portion of the the xml into anothe xml file . using Element lElement = (Element) lNewFeedDocument.importNode(lIncomingFeedDocument.getElementsByTagName(                         "content").item(0), true);             lNewFeedDocument.a

  • Reports web layout HTML

    Dear Friends I am Relatively new to reports. Can you please help me with the following Q's(using report 9i) 1. I created a report in tabular form and in the web layout I cannot see the table cell lines? 2. So I edited the HTML code and gave bordercol

  • Problem with iPod not seeing a whole track

    I have an album as a collection of MP3's. I imported it into iTunes and have played it a couple of times, and all tracks are fine - but when I synced my iPod - 3 of the tracks finish early and abruptly. I have tried deleting the tracks from the ipod