E72 - How to toggle between portrait and landscape...

Some games refuse to run by displaying "This game is not supported in landscape mode. Please turn your handset to portrait mode".
How can I toggle between landscape and portrait modes in Nokia E72?

You can't do that because of the screen orientation which is landscape only in case of E72, E71, E5.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

How to print photos in portrait and landscape from mobile phone

Hi there,
Have just set up my new HP Envy 5532 printer and am having a few issues with printing photo's from my mobile phone.
Could someone please let me know how to choose between portrait and landscape. Also, when I print photo's from my laptop, the settings let me choose which paper size to choose - does anyone know what a 6' x 4' print setting is?
Thanks so much and I hope I have made some sense with my questions!
Monkey-Nicks

Hi @Monkey-Nicks,
Welcome to the HP Support Forums. I gather that you would like to learn how to print pictures on your mobile device to your Envy 5532 printer.
You didn’t mention whether you are using an Android mobile phone or an iPhone so I’ve included the document for each operating system. If you would like more print options than what you currently have available, I would suggest downloading and installing the HP ePrint app. It gives you the type of options that you are looking for.
Printing from an Android Mobile Device
Printing from an Apple Mobile Device
Please let me know if you have any further questions.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to design an iPhone app that uses both Portrait and Landscape in Flash CS6

So I have created an App that has a different menu when it is held portrait, but changes when held landscape. I can get the navigation to work, However I am unsure how to design landscape pages inside Flash?
My stage is set to the standard 640x960 air for iOS, which gives me perfect portrait pages, But when I tilt my phone to landscape the screen obviously changes, and it looks weird. Im hoping someone can tell me how i can get this view inside Flash, while still having the portrait screens too?
I want to have both Portrait and Landscape in the same app, and am currently so confused how I can design this inside flash?
I hope this makes sense, and that someone could throw some help my way!

you can change the display depending on stage orientation but it doesn't make sense to "..swap the stage orientation between screens".
to change the display, use a StageOrientationEvent.ORIENTATION_CHANGE event and listener:
stage.addEventListener("orientationChange", orientationChangeF);
function orientationChangeFr(e:StageOrientationEvent):void{
trace(e.afterOrientation.toString());

How to create a single action for adding a border and signature for portrait AND landscape images???

i would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
need i say more?!
i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
i hope i've been clear and that someone can help me here. I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
Thanks in advance photoshoppers ...

It is actually quite easy to do if you have a good understanding of how Photoshop works. To be able to handle any size Landscape and Portrait you need to scale the document to a known width or height. Once the document is resized to the width or height it easy. When yot resize the document you use Image size with resample NOT checked. Not a single image pixels is changed all the happens is the documents DPI is set to the proper DPI resolution to print that size. This lets you add a border sized for and document. You can use Canvas Size check relative and leatve the anchor point centered and set width and height to 2" this will add 1"on all sides. Use Canvas size a second time move the anchor point to the top center check relative and set height 1" the will add an additional 1" border on the bottom. You then record a text layer with your Name title or what ever to the top left of the image. Select all ant the align the text layer to the selection to move it to the bottom right.
Adding a couple of scripts to the action you can make sure there is a background layer so the added canvas will be filled with pixels. You can restore the document to its original DPI resolution to retain the images print size. Down load my crafting actions package it contains a dozen scripts to be used within actions. There are text file with tips and guidelines additionaly there is one on dealing with document size and includes a sample action set with a watermarking action the can watermark and size image. The Action set is also saved as a text file with additional comments I added my downloads can be found here http://mouseprints.net/Photoshop.html

My Portrait and Landscape is lock. icon in status bar double tap home button to unlock there no multi-task bar how do i unlock this

My Portrait and Landscape is lock, icon in the status bar. Tried the double tap home button. there no multi-task bar to unlock

dg8wood wrote:
THANK YOU... This was driving me CRAZY.. how do I do the green check
You seem to have succeeded with the green check. Glad you got everything figured out!

How to change the capture resolution of CaptureDevice and toggle between front and rear camera

Hi. I'm using Visual Studio 2013, and the Windows Phone App template. I'm using the Microsoft.Devices / CaptureVideo API to capture video. I now want to set the resolution to capture the video in a specific(available) resolution. How do I do that?
Code snippet reference to API:
CaptureVideo vcDevice = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice();
and I also want to put a button there to toggle between front and rear camera. If I click the button, and the rear camera is currently active, the front camera must become active and vice versa. How do I do that with this API?
Thank you.

visit this page to know how.
http://stackoverflow.com/questions/25466088/how-to-switch-to-front-camera-in-windows-phone-8-1-winrt-jupiter

Every time I toggle between silent and regular sound the sound effects disappear on mail how do I fix it?

Every time I toggle between silent and regular sound the sound effects disappear on mail how do I fix it?

With headphones?
With speaker?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My phone automatically toggles between silent and ringer mode. How to fix ?

my phone automatically toggles between silent and ringer mode. How to fix ?

Hey there Sam1011,
It sounds like you are not flipping the side switch but the phone keeps muting and unmuting by itself.
I would start by toggling the side switch manually to mute, then unmute. Then evaluate it for a bit. If the issue persists, reset the phone with this article and test the issue.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears
If the issue persists I would next backup your phone to iTunes and then restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the best,
Sterling

How do I convert a FrameMaker file containing both Portrait and Landscape pages into PDF?

I have recently converted to FrameMaker 9 and Acrobat 9. In the FrameMaker manual I am creating, most of the pages have Portait orientation, but some have Landscape orientation. However, when I convert the manual to PDF using Acrobat Distiller, the Landscape pages become Portrait. This wasn't a problem when I converted the manual into PDF in previous versions of Acrobat Distiller, it appeared after I installed Acrobat 9. In other words, the FrameMaker file has worked before. I have also tried this on three different computers to make sure the computer is not the problem. Does anybody have any ideas that I could try to make this work?

Jorunn, did you ever resolve this problem? If not, I've got a solution for you.
In FrameMaker, select the book you want to create a PDF of, click File > Print, and select Adobe PDF as your printer.
Click Properties and make sure you have the selections you want.
Back on the Print Setup dialog, leave the Paper and Orientation as both Letter and Portrait respectively.
On the Print Book dialog, select Print to File and browse to the correct location. Make certain to save this as a PostScript file (name.ps) and at the Safe Book As field, you want Single File selected.
Again on the Print Book dialog, click the checkbox for Generate Adobe Data and click PDF Setup. On the PDF Setup for Selected Files dialog, at the PDF Job Options, select Press Quality or make the appropriate choices for your situation for Settings, Bookmarks, Tags, and Links.
With Adobe Distiller open, File > Open and browse to the .ps file you indicated earlier. Also verify your Default Settings for the PDF are correct. When Distiller is finished, you can double-click the PDF file to open it and check that your portrait and landscape pages show correctly.

Images in portrait and landscape positioning

In portrait mode all my images are situated perfectly with text before the image and then text after the image. In one section I only have 4 images.
When I switch to landscape mode the images are situated in different positions - not radically different but different enough so that the text does not 'fit' with the flow of the image-supported narrative.
When I move the image one overlays on top of another :-/
Or hides behind a page if I move along to the required position.
I have deleted and re-added, moved text, created different sections so that only one image per section occurs (though this is stupidly inefficient!!) but a mess!
How do I add images within text so that both in portrait and landscape they (the images) are positioned correctly?
Thank you.

Mine are currently working when set to "Inline (moves with text)" and each takes a little adjustment. This is not satisfactory for me either. - Fabe

Section header with portrait and landscape view

My iBook project is being created so that it is available in both portrait and landscape view. This has been a tricky process since alot of content was distored when I created the layout using landscape and then attempted to adjust the portrait view after that. Currently, after many adjustments, I am attempting to remove the small "section number header" throughout the book at the very top of each chapter header in portrait mode. I was able to remove the the section number from the landscape mode, but can't seem to figure out how to do so with portrait mode (or if it is even possible?)
Help and suggestions are greatly appreciated.

Remember....layout in landscape - edit content in portrait.
Did you try to select the section number header in the style drawer and remove it from the master layout?

Toggle between Rosetta and Universal

I just installed Flip4mac wmv, in the post is suggested that I select Rosetta in the Get info panel that all went well and I was able to watch the wmv file, no problem.
My question is how do I get out of or toggle out of Rosetta back into Universal. I have looked on different sites, I must have missed something, I can't seem to figue out how to do this.
Please excuse my lack on knowledge, this is my second week on a Mac.
Many thanks.

I went into Quicktime and was able to select Get Info to change to Rosetta, yet there is no option to go back to universal. What I m reading on the posts that suggested that you can toggle between Rosetta and Universal, or am I misreading that.?
My Mac Pro is Intel chipped.

Smartfroms for portrait and landscape format

Hi Experts,
can we able to create a form in two different format (Portrait and landscape) in a smartform. If any one have idea, Please assist me on the issue? if we can, can we able to extend secondary window for next page or not?
Appreciate your aid in advance.
Ram.

Hi Sharin,
Thank you for your response.
yes, you right we can use both formats (portrait and land scape) in one smartform. But, here my probelm is when i use two main windows with difrerent main window size (width), the SAP system is not accepting. and even the page break also not working in secondary window.
I want to display some number of forms with different format (say portrait and land scape). In this case the main window size is different. so how we can achieve solution for this issue.
if you have any idea, please share with me.
Thanks for your reply in advance.
Ram.

Images in Portrait and landscape

I am trying aperture 3 on trial, I moved some images across from iphoto and now I have every image in portrait and landscape, how can I change this?

Mine are currently working when set to "Inline (moves with text)" and each takes a little adjustment. This is not satisfactory for me either. - Fabe

Both Portrait and Landscape format using SMARTFORMS

Hi All,
I have a requirement where i have to print few pages in Portrait and few Pages in Landscape using Smartforms.
Now my question is wheather it is possible using smartforms and if possible how can i build the logic.
As i have to dispaly the first page in portrait and second page in Landscape format.
Thanks in Advance !
Thanks
Shashikanth

Hi,
You can do the portrait/Landscape settings for each page. Click on the Output option of the page and there you will find the radio button for portrait and landscape
Thanks
Arul

E72 - How to toggle between portrait and landscape...

Similar Messages

Maybe you are looking for