E72 - How Use email with 3G or WLAN connection

1) CONNECTION CONFIGURATION
To configure the Phone to prompt always the selection of Access Point to use, you should go here:
Menu -> Ctrl. Panel -> Settings -> Connection -> Destinations.
then, with in the Options menu, select Default Connection, and set it as ASK ALWAYS.
2) EMAIL CONFIGURATION
Each email account allow the configuration of the default "Destination" that should be used:
Menu -> Email -> Settings -> "Your Account" -> Mailbox Setting -> Advanced Mailb. Settings ->
- > Incoming email -> Access point in use := ASK ALWAYS
-> Outgoing email -> Access point in use := ASK ALWAYS
If you use the Push Email functionality, the configuration of access point is here:
Menu -> Email -> Settings -> "Your Account" -> Account Settings -> Account Information -> Access Point
But for this functionality it's not possible to set as ASK ALWAYS, you should configure a fixed access point.
I hope that now you are able to use the email (not only email, but all apps) with the correct connection.
Bye from Italy.
Edi

Hi, Thanks for the info.... I also looking for the solution to set/assign "connection group" instead of define single connection... but i guess this is not feasible in current firmware... hope to available future firmware relase.
Regards,
Anandharaj
www.raj2u.net :: E72-1 | RM-530 | 023.007

Similar Messages

SMTP Host logs - How many users are authenticating - How many emails with distinct titles

hello,
can anyone help me out with gathering the following SMTP host logs to see:
How many users are authenticating.
How many emails with distinct titles
Can this be done in powershell or do i need to be looking somewhere else.
This is for O365

Hi ,
Since the emails are hosted with office 365 i would suggest you to raise a ticket with Microsoft and request assistance from them which will make this task much easier
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

How use multithead with socket

How use multithead with socket
I need do a client and server program that accept multitherad issue
Thanks who can help me

you'd have to do something like this:
(this is all assuming you want to read Strings from the socket. setSoTimeout works for any read() call to the InputStream associated with the Socket)
ServerSocket ss = new ServerSocket(myPort);
Socket s = ss.accept();
s.setSoTimeout(5*60*1000); // 5 mins * 60 secs * 1000ms
BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
boolean running = true;
while(running)
try
String readIn = in.readLine();
// do whatever you want with the data read
catch(SocketTimeoutException)
running = false;
Now. That's what I think needs to be done. I don't have Java on the machine I'm currently on, so I can't test/verify it, but it goes something like that.
Good luck,
Radish21

How use Email Response to +1000 profile?

Hi,
We have a requirements business, which our 1000 users will left use webmail/outlook. These users will only use Siebel to send/receive emails, but each employee we'll use a email account, so we'll have 1000 profiles using Email Response.
Oracle Support don't recommend use a huge number of profiles. But they don't recommend another solution.
ANYONE ALREADY IMPLEMENT THIS TECHNOLOGY? HOW CAN I USE SIEBEL, WITHOUT USE A OUTLOOK OR A WEBMAIL???
Features:
Siebel 8.0 - Windows 2003 Server - SQL Server 2005.
EMAIL Server - Send Mail server using POP and SMTP protocols.
Thank you!
Roberto Ohara

If you know how to have an email sent to you as the site owner, then you know how to have another email sent to the submitter, its the same code with some different destinations. So for example, if you have this for your script (assuming php) to process the information to be sent to you
$fname = ($_POST['fname']);
$lname = ($_POST['lname']);
$email = ($_POST['email']);
//Sending Email to form owner
$header = "From: $email\n"
. "Reply-To: $email\n";
$subject = "Submission From My Form";
$email_to = "[email protected]";
$message = "name: $fname . $lname\n"
. "email: $email\n";
@mail($email_to, $subject ,$message ,$header ) ;
You could simply change it to this: The email, header subject message have a _sub added to it to differentiate from the origianal script. I have also taken out the variables since they are already on the page.
//Sending Email to submitter
$header_sub = "From: $email\n"
. "Reply-To: $email\n";
$subject_sub = "Submission From My Form";
$email_to_sub = "$email"; /* This has been changed to the email address of submitter*/
$message_sub = 'Put whatever message you want here.';
@mail($email_to_sub, $subject_sub ,$message_sub ,$header_sub ) ;
Now with both scripts, the owner and submitter get an email.
Gary

How use jdbc with swing ? i am new in this concept.

hi
freinds,
i am new in java can any one give the example which explain the how to use jdbc with swing.
thanks in advace.
satish
thanks.

See here > http://support.apple.com/kb/HT4236
More info in the User Guides for your Devices...

How use Tomcat with MySQL

Can anybody suggest me as how to use Tomcat with MySQL server.
Thanks in advance.
Khiz_eng

add the classpath to the JDBC-driver to the tomcat-
environment (I did it in tomcat.sh)
Then put your code accessing MySQL into a servlet....
You can put the user-ID and the password into a session-
object or read them in as parameters.
The book 'core Servlets and Java Server Pages' from
Marty Hall gave me a lot information.
Regards
Fredy

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

My E71 uses WAP even when a WLAN connection is ava...

I'd like to set it so my phone ALWAYS uses WLAN if available and only ever uses WAP when there is no WLAN connection.
It's a new phone (to me, anyway) and I'm still getting use to the settings.
It's an Eseries E71.
Thanks!
Solved!
Go to Solution.

Go to Web > Options > Settings > General > Access point - does it currently say "User defined" or "Ask on connection"? If says the former change to "Ask on connection" and then back to "User defined" to give you opportunity to choose WLAN access point.
Another way is to install SmartConnect by Birdstep form Nokia Store: http://store.ovi.com/content/10328
Happy to have helped forum in a small way with a Support Ratio = 37.0

My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe

How use REPORT_DESTYPE with WebDAV

Hi,
How can I use the RUN_REPORT_OBJECT command to send report to Portal via WebDAV. If I try:
SET_REPORT_OBJECT_PROPERTY( repid, REPORT_DESTYPE,WEBDAV);
there is an error:
identifier "WEBDAB" must be declared !
In the Document " Oracle Application Server 10G -Integrating Oracle Reports in Oracle Forms Services applications" It said the REPORT_DESTYPE may be FILE, PRINTER, MAIL or CACHE only. What about other types like OraclePortal and WebDAV ?

Hi Fang,
As far as I know, SQL Server Reporting Services (SSRS), have no permission extension. In Reporting Services, it is use role-based security to grant user access to a report server. There are two types of roles: Item-level roles and System-level roles.
Based on my test, if we assign user with System User System-level role, the user will have permission to user Report Builder to create report. However, if we only assigned Browser or Report Builder Item-level role to the user, he/she will have no permission
to publish the report to the report server. In this situation, although user have permission user Report Builder to edit the report, it will have no effect of the report in report server. User who has assigned Browser or Report Builder Item-level role will
have no permission to delete report in the report server.
There is an article about Setting Permissions in Reporting Services, you can refer to it.
http://technet.microsoft.com/en-us/library/aa337491(v=sql.105).aspx
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How use locator with sax to get line number of an element?

dear friends,
it's clearly stated in subject. after trying for hours, i still couldn't figure out how to get line numbers. my class extends defaulthandler. please help.
ozgur

hi
i am also struggling with same problem
someone plssssssss help.....
how can i use Locator to get line number of the XML document.
in my extended DefaultHandler class i have just implemented this,
public void setDocumentLocator(Locator location) {
lineNumber = location.getLineNumber();
but no help...
how to register my parser to the documnet locator events?
plzzzzzzz help...
-Soni

How use xml with namespaces

I have the following xml which is output from Oracle Bpel.
<OglRapportPerAdresnrResponse xmlns="http://www.itude.com/technology/Ogl/RapportPerAdresnrResponse">
<AdresGegevens>
<Adresnr>54321</Adresnr>
<Straatkode>12345</Straatkode>
</AdresGegevens>
</OglRapportPerAdresnrResponse>
If i remove the namespace info everything works fine but with the namespace info the output is empty if i insert e.g. <Adresnr> into a template. The field browser shows everything fine and also the value but when rendering a PDF it disappears. I read in the user guide that i need to declare the namspace in a form field like <?namespace:namespace name= namespace url?> but how do i do that with the above namespace notation where the namespace name is empty ?
Regards,
Andre

Hi Tim,
I found part of the solution but i am still stuck when i need to use <?for-each?> tags. When i use the following XML:
<OglRapportPerAdresnrResponse xmlns="http://www.itude.com/technology/Ogl/RapportPerAdresnrResponse">
     <AdresGegevens>
          <Adresnr>8391</Adresnr>
          <Straatkode>11070</Straatkode>
     </AdresGegevens>
     <Basisgegevens>
          <paramPResult xmlns="urn:generated.ws.kgb.itude.com">
               <paramAdresnr>8391</paramAdresnr>
               <paramGegevenstype>GEBRUIK</paramGegevenstype>
          </paramPResult>
          <paramPResult xmlns="urn:generated.ws.kgb.itude.com">
               <paramAdresnr>8391</paramAdresnr>
               <paramGegevenstype>STADSDEEL</paramGegevenstype>
          </paramPResult>
     </Basisgegevens>
</OglRapportPerAdresnrResponse>
I read the xml file in Word. I then have access to the fields but when i select AdresGegevens/Adresnr the output is not rendered. The namespace is a default namespace for that element. I found out that if i define a namespace like <?xmlns:bpel=http://www.itude.com/technology/Ogl/RapportPerAdresnrResponse?> and then access the AdresGegevens/Adresnr through <?bpel:Adresnr?> it works!
I then defined a second namespace <?xmlns:bpel2=urn:generated.ws.kgb.itude.com?> and tried to render the paramPResult tags with:
<?for-each:paramPResult?>
<?bpel2:paramAdresnr?>
<?bpel2:paramGegevenstype?>
<?end for-each?>
But the above does not work. Any ideas?
Regards,
Andre Jochems

How use USB with VISA resource name?

Hi,
I'm new at LabVIEW and I'm working on a code that has to acquire data from a measurement device.This device only has a USB output so I have to work with it. As far as know the block that is used to refer a external port is VISA resource name. I have installed a driver that recognizes the serial ports, and they appear in the list of VISA resource file at front panel. So I figured that installing the product's USB driver so the USB's ports would appear. I installed and nothing of USB ports. I don't know it is that simple or working with USB ports is a little bit harder. I've tried a lot of things and nothing worked so here I am.
PS: I have noticed that the driver's version is 64 bits (my pc is 64 bits) and my LabVIEW version is 32 bits, so could that be the problem?
The device by the way is Digital Analyzer WT500, Yokogawa.
Thank you.
Solved!
Go to Solution.

Victor,
the suggestion of Instrument Driver is to make more easy using the instrument.
Normally, you should install a windows drive from manufacturer (if it isn't installed, the instrument will appear like a pendrive in device manager) and the NI VISA. But for some instruments, the manufacturers have API's that uses NI VISA to communicate with your equipments.
So check if your instrument appear correctly in device manager (as indicated by Yokogawa). If not, check if Yokogawa has an appropriated driver for this instrument and install it.
Is it clear?
If you prefer, contact NI Brazil Support by website or by phone (11)3149-3149 Ext 3.
Ricardo Ramos
Engenheiro de Vendas - Sul
National Instruments Brasil

How use SetIntArrayRegion with std::vector int ?

I have a vector of ints that i want to put into a jintArray. How do I do this?
When I tried the below code, it didn't work but instead when i printed out the int values on the java side, they were all messed up.
jintArray arr = env->NewintArray( intVector.size() );
env->SetintArrayRegion( arr, 0, intVector.size(), ( jint * ) &( intVector ) );This returns weird values. What am I doing wrong?

This isn't a Java/JNI-specific issue. Your code also wouldn't work if you tried to do this:
void foo( int* );
void bar() {
    vector<int> a(10);
    foo( (int*)&a );
}Hint: using a cast is a bad idea. It's wrong for the same reason the following code is wrong:
void foo( double* );
void bar() {
    double d = 42.0;
    foo( (int*)&d );
}You can't just use a cast as a sledge-hammer and magically expect the right thing to happen. In your original code, you're passing the address of the C++ vector object as if it were the address of a plain old C-style array of int.
Using old-style casts is a bad idea in general. This is why new-style casts were added to the language. Had you tried to use:
    static_cast<int*>( &intVector )the compiler would have correctly complained. Old-style casts assume you know what you're doing. In this case, your old-style cast is equivalent to a reinterpret_cast<int*>.
That aside, there's intentionally no way to convert a vector<T> into the address of its first element because there's no guarantee that the implementation of vector will store array elements contiguously.

How use proxyclient with Reportexecution2005?

Hi,
I want to run a report from a SSRS-server in my C# code (i want to export the report in a 2007-2010 excel format).
I know that I need to use the Reportexecution2005 WCF-service but I have never done this before and I can't find any nice examples on the web...
The most examples doesn't deal with a "Soap-client" (they seems to use the webservice-class) and use another kind of Reder-method (with differende parameters).
Here is my beginning:
varclient =
newReportExecutionServiceSoapClient();
var  result = client.Render(???)
Hope someone can help me to with the code...
regards,
Marius H Enerud

Hi Marius,
On the basis of the description, I understand that you intend to use ReportExecution2005 web service to render reports in Excel format.
The Reporting Services Execution Web service allows developers to programmatically process and render reports from report server. To process a specific report and render it in the specified format, we can use the “Render” method in the ReportExecutionService.
Here, you can see these steps below to render the report:
1. In the custom application, add a web service reference. The endpoint should be:http://<servername>/reportserver/ReportExecution2005.asmx
2. Use the following code to render the report in the specified format:
using System;
using System.IO;
using System.Web.Services.Protocols;
using myNamespace.MyReferenceName;
class Sample{
static void Main(string[] args)
ReportExecutionService rs = new ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;        rs.Url= "http://myserver/reportserver/ReportExecution2005.asmx";         // Render arguments
byte[] result = null;
string reportPath = "/AdventureWorks Sample Reports/Employee Sales Summary";
string format = "Excel";
string historyID = null;
string devInfo = null; // Prepare report parameter.
ParameterValue[] parameters = new ParameterValue[3];
parameters[0] = new ParameterValue();
parameters[0].Name = "EmpID";
parameters[0].Value = "288";
parameters[1] = new ParameterValue();
parameters[1].Name = "ReportMonth";
parameters[1].Value = "6"; // June
parameters[2] = new ParameterValue();
parameters[2].Name = "ReportYear";
parameters[2].Value = "2004";
DataSourceCredentials[] credentials = null;
string showHideToggle = null;
string encoding;
string mimeType;
string extension;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;        string[] streamIDs = null;
ExecutionInfo execInfo = new ExecutionInfo();        ExecutionHeader execHeader = new ExecutionHeader();        rs.ExecutionHeaderValue = execHeader;
execInfo = rs.LoadReport(reportPath, historyID);        rs.SetExecutionParameters(parameters, "en-us");         String SessionId = rs.ExecutionHeaderValue.ExecutionID;        Console.WriteLine("SessionID: {0}", rs.ExecutionHeaderValue.ExecutionID);
try
result = rs.Render(format, devInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
execInfo = rs.GetExecutionInfo();            Console.WriteLine("Execution date and time: {0}", execInfo.ExecutionDateTime);
catch (SoapException e)
Console.WriteLine(e.Detail.OuterXml);
}        // Write the contents of the report to an PDF file.
try
FileStream stream = File.Create("report.pdf", result.Length);
Console.WriteLine("File created.");
           stream.Write(result, 0, result.Length);
Console.WriteLine("Result written to the file.");
stream.Close();
catch (Exception e)
Console.WriteLine(e.Message);
For more information, please see:
ReportExecutionService.Render Method
ReportExecution2005 Namespace
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
If you have any feedback on our support, please click
here.
Heidi Duan
TechNet Community Support

E72 - How Use email with 3G or WLAN connection

Similar Messages

Maybe you are looking for