E72 keeps ringing at display after answer button i...

I have a problem with my E72.
The phone keeps ringing in the display for about 20-30 sec after I have pressed the answer button. The phone call gets connected but not in the display. I also have the bluetooth headset BT-215 with vibration and that also vibrates during this period but I can speak and hear as normal.
Does anybody have a solution for this problem?
I´ve tried the do a hard reset and upgraded the firmware but it doesn´t work any better.

I got the issue solved - I turned all devices off, then on again. Turned FaceTime off (then on) on all devices. FaceTime and call sync working great.

Similar Messages

  • How to keep ical alarms displayed after restarting

    I notice that my iCal alarms disappear after quitting iCal or restarting my computer. For example "Call Doctor" shows up today at 8 am when I start work. I shut down for a meeting. I restart and the alarm message is gone. The event is still there. But I might forget to call unless I see the alarm again. I remember Microsoft Entourage did this and I found it very helpful. Is there a way to get this same effect with iCal?

    Hi,  This is not related to your question about ical alarms, but to a previous post you made when your iweb crashed when saving.  I also had to use time machine to transfer all info to a new computer and I am having the same problem when I try to save.   I did not completely understand your solution because I am not very savvy with computers. I did go in and change all the permissions to read and write, but I still have the problem.  I don't know how to "add my account name to the File Info"-
    I just spoke with a supervisor from Apple for two hours and who did not solve the problem.  (He thought he did, but he did not and he has not called me back). 
    If you could give me an explanation of your solution, it would be very helpful and immensely appreciated. 
    Thank you for any assistance you can give me regarding this.  I really need my iweb!
    [email protected]
    Here is the solution you posted: 
    I figured it out. It was those permissions. I simply added my account name to the File Info. For some reason the Time Machine restoration did not copy the permission for the package (however the contents had the correct permissions.

  • Missed calls from my iPhone keep ringing on my Mac, even after the caller hung up.

    I have a MBP mid-2012 and an iPhone 5 with iOS 8.1.2.
    I have no problem answering or initiating phone calls from my Mac with Continuity. The only problem is when I miss a phone call: the Mac can keep ringing long minutes after the caller on the other side hung up and the call is marked "missed" on the phone. Trying to answer from the Mac at this point will have no result, off course.
    I don't have a voice mail box on this line (no need for it, IMO, when there is texting...)
    Is this a bug? Or maybe a feature I can set/override?
    It's pretty annoying.

    some problem. imac retina.

  • After "slide to unlock" keeps ringing

    Hello,
    I've got an iPhone 5c and sometimes when I receive a message and unlock my phone, it keeps ringing to say I have a message whilst I'm reading the message.
    The only way to turn the ringing off is to press the top button... Otherwise it keeps ringing until it's finished.
    I've looked everywhere for a solution, does anyone else have one?
    Thanks in advance!

    Hello Jesper girl,
    Thank you for providing the details of the issue you are experiencing with your iPhone continuing to ring after you unlock it.
    I recommend following these steps for an issue like this (you can skip 4 because it does not relate to the issue you are experiencing and any other steps you may have taken):
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you get to step 5, I recommend backing up your iPhone before performing the restore:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Phone keeps ringing on the caller's end - Is This a Call Waiting and Flash Button Problem?

    I had FIos phone service installed 2 weeks ago.  I am having a sporadic but regularly occurring issue with incoming calls that I think might be related to the Call Waiting and flash button so I am looking for some input.  Before describing the issue here are a couple of things to know:
    - I have my Verizon voice mail service turned off on my account.
    - I have the call waiting function set to off.
    - On my phone handset the Talk and Flash operation is the same button.
    Now here is my issue.  Often but not 100% of the time people are telling me that the phone just rings and rings on their end.  After receiving many complaints since my Fios install that the phone rings and my phone answering machine does not pick up the call I have been calling my home phone number with my cell phone and I have determined the following:
    1.  My home answering machine will pick up the call, however on my cell phone which is the calling end the  phone is still just ringing.
    2.  Sometimes I will press the talk button but there will be dead air but on my cell phone which is the calling end it will still be ringing..  But if I press the Talk/Flash button a couple of times the call completes.
    Since my Talk and Flash button are the same I started to wonder if that is a factor so I repeated scenarios above and found that after pressing the Talk button a couple of times then the call is answered and the phone stops ringing on the caller's end.
    I know that with Call Waiting the caller's end will just keep ringing unless the called end switches over with the Flash button.  So my question is even though I have the Call Waiting function turned off could the combination Talk/Flash button be the reason why the call just rings on the caller's end even though I have Call Waiting turned off?  And f this is the cause then why is it happening and does it mean that I have to buy a new phone that has separate Talk and Flash buttons?
    I hope the above description of my problem makes sense and can be answered.  Thank you

    Without buying a new phone you can test this. Unplug the phone that has the combination button. If its a cordless phone base station with multiple handsets, make sure you unplug those as well. Then use a regular phone plugged in to do test calls (if you dont have one you could maybe borrow one for a couple minutes from a friend, family, or neighbor).
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • My display keeps changing to 800x600 after upgrade to 10.8.3

    After upgrading to 10.8.3 my display keeps changing to 800x600 after it wakes up from sleep. I have to go to preferences and set again, and it works. It is quite annoying. Any clue.

    Not much to go on.
    What monitor and connection method are you using with the mac Mini..?
    Have you tried resetting the > NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the

    Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me

    Doing those doesn't turn off your phone?
    As stated hold down the top button only until you see the red slider to power off your phone.
    If that doesn't work then take it to Apple and see what they say.

  • I need that this button must get displayed after an empty space below table

    Hi
    I have created a table and added a button at bottom of table.
    I need that this button must get displayed after an empty space below table.
    How can i get an empty space there.
    I have took a transparent container and selected a grid layout for it.
    Thanks.

    Thanks Apurva....inserting "Horizontal gutter" solved my problem.
    I need one more help.
    In this transparent container, i have to add a header text displaying caption for this table and then a section which will display some buttons and text, then this table will be displayed and at last this update button.
    i.e.
    1.  header text
    2.  area with few buttons and text(lables)
    3. Current table
    4. update button.
    for this as i specified i have used a transparent container with grid layout...
    Please guide me in this...
    Thanks....

  • After answering the three security questions on itunes connect the submit button is still grayed out. It looks like it could be an error on the website. Has anyone encountered this issue?

    After answering the three security questions to update an app on itunes connect the submit button is grayed out. It looks like an error on the website. Has anyone ran into this problem before? Any help would be greatly appreciated.

    Hi evanVIT, 
    Welcome to the Apple Support Communities!
    I understand that issues like the one you are experiencing can be very frustrating. For this situation however, for update errors in the range of 3000-3020, I would recommend the troubleshooting steps located in the attached article. Please use the steps and information as a reference. 
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Cheers, 
    Joe

  • Icloud is synched to the wrong apple ID and the password was unknown to me, after answering the security questions I was able to reset it. Now when I try to login on my ipad to delete the icloud associated to that apple ID it keeps telling me its wrong?

    I bought a new Ipad and backup all my info form ym old one to my itunes. I set it up but now for soem reason by icloud on my new ipad is set up an old apple ID account I have never used. After answering security questions I was able to reset my password but when i try to use it on my new ipad to delete hte icloud it keeps telling me its wrong.
    Any way I can go around it or is there another process I need to do before the ipad starts recognizing hte new password I set for the old apple Id account?

    It sounds like the new iPad, had a previous owner.    If you don't recognize the email for the Apple ID on your iPad, then it was registered to another person.
    If it was, you can't use it and should return it.

  • Forced Navigation - Want the next button to display after user clicks on all buttons.

    Hi. I'm new to using Captivate to make a learning module. I'm stuck on this forced navigation issue. I created 8 click boxes that the users have to click on. I created 9 advanced actions. Each AA for the click boxes hides text boxes that don't pertain to it, shows a text box, plays audio, and assigns a number 1 to a variable I created. There are 8 variables. I then created an conditional AA that displays the next button once all 8 variables have the number 1 assigned to it.
    For some reason, the next button doesn't display even though I'm sure each variable has the number 1 assigned to it. Also, I want the entire audio to play for the click box before the person can click on the next click box. Right now, I can click on a click box and then another click box right afterwards and the audio stops and the next audio starts. Can you all please help?
    I am using Captivate 6.0.0.199.  My computer is running Windows 7.  I want the output to be SWF.  Thank you in advance for your help!

    First of all, install the patch, you are still on the unpatched version that had a lot of bugs. Almost one year ago a fix was released, your version should be 6.0.1.240. Use Help, Updates.
    The difficult part will be the audio, the other part should be very easy, have explained that a lot of times. You could disable all click boxes, but then you need a new event to trigger the 'enable' action. Is it that important? Are those users not wise enough to listen to the audio, or is that audio not interesting enough? Why not instruct them about listening?
    I suppose you use the Play Audio statement, and indeed, when you trigger another audio clip the previous one will be stopping. You could attach the audio to an 'invisible' object, and make that visible which will play the audio. But that will cause another issue if the user clicks too quickly on a second click box: both audio will play at the same time.
    Lilybiri

  • Lock symbol appearing next to top right power percentage display after rebooting the ipad. Anyone has answer to what went wrong. Thank you.

    Lock symbol appearing before next to the top right power % display after rebooting the ipad. Anyone has answer what went wrong? Thank you for your help. 

    You have enabled Rotation Lock.
    http://support.apple.com/kb/HT4085

  • Skype's latest build on Android keeps ringing afte...

    Hello,
    I'm having trouble with Skype mobile's latest build on my Android phone (Garmin-asus Nuvifone a50 with Android 2.1-update1, latest version available for that phone)
    I downloaded the latest skype update yesterday (Sept. 29, 2011), it says it's version 33882220.
    Since then, whenever I receive a call, once I pick it up, the phone keeps ringing and vibrating, and I can't get out of the call window, even if I hit the hang up button. The phone keeps ringing until I disconnect Skype or kill the app within Android.
    Same problem when I try to call someone, the person picks up, but the phone keeps ringing, even though I am speaking with the person I'm calling. Here too, if I hang up, I effectively close the communication, but the phone keeps ringing and does not close the communication window. Only disconnecting or killing the app solves the constant ringing.
    Edit: I forgot to mention, I tried to reboot my phone, but it did not solve the problem. The I tried uninstalling and reinstalling Skype, but it did not solve the problem (although I did not reboot the phone after uninstalling...)
    Any help is appreciated.
    Thank you in advance.

    me too , i have the same issue
    Sony Ericsson, XPERIA, 10X pro 

  • Why does the ringer volume display frequently on 3gs

    Why does the ringer volume keep displaying on my 3gs? Seems it may do this when the phone is picked up or shaken.

    This just happened to me today. The ringer volume display just remains on screen. Tried hard rese, nothing. It happened right after I dropped my 3GS - of which I've done many times but had not affected it because of the silicone case taking the brunt of the shock. Hope someone has a solution to this.

  • Nokia 2720 fold, How to keep the front display all...

    Hello,
    I bought a Nokia 2720 fold. This phone has two displays. One inside, you see it when your fold the phone out. And on on the front. You see it when the phone is closed.
    My question: How do I keep the front display allways on. I want to see the time immediatelly, when I look on the folded phone. At the moment the light fades out after 10 sec.
    Thanks

    Support?
    This is the Official Nokia discussion sites as you might already know. What you might don't know yet is that these sites are mainly a user to user forum where Nokia users can share their knowledge and help each others with issues.
    There are some emplyees that are around here now and then. They are in green and are here on their spare time. You might get an answer, or you might not. - As I wrote, this is mainly an user to user forum.
    Now, for direct contact with Nokia, click the "contact us" button on the top right of this page. You will probably be able to contact them bay either mail or call.
    On these boards, you will have to wait untill someone decides to reply your thread.
    (I cannot help you with this as I don't have the phone. Bumping your thread is not allowed)

Maybe you are looking for