E72 - language will revert after software updating...

The phone was bought in germany....I installed hebrew in a nokia care point..
They werent so sure if the language will revert if I will update my software....
So maybe someone here can tell me for sure if the language will revert??
Thanks all
Ofer

cjlim Mobile Sensei wrote in a post dated december 2009: You can have a language pack containing Chinese installed by most Nokia Care Points. However, the phone will revert back to its original languages if you update the firmware.
I guess that would apply to every language (pack).

Similar Messages

Arabic language disappeared after software updater...

Yesterday night I decided to update my mobile software using nokia software updater to solve a performance issue as mentioned in the website.
I took a full back on my MMC then started the update.
My mobile software version was 1.00.XXXXX and the new release is 4.XXXXXX
The update completed successfully, but after I restarted the mobile I was shoked of the following issues :
- The arabic language disappeared from the phone lagnauge selection.
- MMC requested a passrowd to ulock it !!! while I dont remember that I set a password for it or I may set it once long time back but I forgot it now.
I'm surprized for what happened as I had a discussion last night with my father regarding Nokia trust relation ship .
Please advice how can I solve my issues ASAP.
All my contacts are backed up on the memmory .

read this :
/t5/Software-Updates/Language-changed-or-missing-after-software-update-sticky/td-p/265903
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

USB Audio stopped working on 27" ACD after software update 1.0

Hi all,
My 27" ACD worked flawlessly until I installed 27-inch LED Cinema Display Software Update 1.0 earlier tonight. I have a unibody MacBook Pro that doesn't output audio from the mini displayport, when I got the ACD Friday, USB audio output worked fine. I also have a 24" ACD and audio worked fine on that as well. But after software update 1.0, I can no longer get audio output of the 27" ACD to work via USB, I even rebooted my Mac and it still doesn't work. After trying it a few times in Sound.prefPane, I now can't even select the "Display Audio - USB" option (when I click on it it reverts to the other option right away).
From /var/log/system.log, I believe this is the error related error message:
System Preferences[332]: Error ^P trying to set sOut device to 264
Message was edited by: ayn

I have this problem too. I have the 27-inch LED cinema display connected to my Mac Pro 1,1 via the Radeon 5770. I also suspected it had something to do with the machine going to sleep, but the audio doesn't disappear every time it goes to sleep. Unplugging the monitor fixes the problem.
I also noticed that when the sound has went away, if I try to change the volume there will be a long delay before seeing the volume-change graphic. Also, toggling the sound device in System Preferences while the problem is in effect is unresponsive, sometimes giving the beach ball. Finally, this message is seen in console logs when the sound has went away:
10/19/10 6:01:22 PM kernel USBF: 75053.200 AppleUSBEHCI[0xf3d0800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
I can make this message appear on demand by attempting to change the volume.
If (when) this happens again, I'm calling support.

Problem restarting after software update

Computer is fine, drive 40% full, no speed problems...
But it just won't restart after software update runs, nor will it restart or shut down from finder.
Problem solving so far: Safe boot, reset pram, ran disk utility, ran disk repair using install disk, ran fsck -y, ran disk warrior.
Is annoying. ANy ideas anyone? If not, what is the procedure for updating using sudate and terminal, as when I use software update, a force shut down will not install.
ANy ideas folks?

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ????

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?

If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck.

After software update apple rv light flashing and not coming on

After software update my apple tv did not come on and light is flashing I tried in pluging and all what next for me

It was probably applying the update and rebooting, unless it had doin it for awhile?. You will need to grab a micro usb cable and restore in iTunes
http://support.apple.com/kb/HT4367

Installed Applications in E63 after Software Updat...

Will the installed Applications in my Nokia E63 work after Software Update? Is the any issue found by somebody?
Narottam Das
Kolkata, India

Hi steverabs
Unfortunately downgrading back to v12.0.013 is not an option with NSU.
GPS data is found in "Tools"
If you have installed any applications yourself, these will unfortunately have disappeared unless they were on memory card and phone settings were saved to memory card and then restored to phone after upgrade.
Happy to have helped forum in a small way with a Support Ratio = 37.0

A big deal of data lost after software update

Hello,
Hopefully someone will look into this problem. I have seen also here other reports of losing data after software update.
I have a Nokia N73 Music Edition. Before I updated the firmware, I used Nokia PC Suite to backup all data in the phone memory as well as the phone settings. After a successful update, I tried to restore the backup. No error occured during the restoration. However, I found out many things hadn't been brought back to my phone, such as messages, notes, as well as landmarks that I saved in Nokia Maps.
I want to know what is going on and if there is any hope to get back those lost pieces. Thank you!
Best regards,
Wei

Sorry if your husband didn't backup your phone either to iTunes or icloud prior to updating your phone, then those data is gone.

My keyboard failed to function after software updates

what should i do..my keyboard failed to function after software updates. i'm using virtual keyboard now.

It would help us to know which comp model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
This will help in providing you with the proper and/or correct solutions.

N97, issues still unresolved after software update

I was happy to see the latest software update from Nokia for N97 hoping it would have solved the issues but I was very disappointed experiencing the same problems that I was getting before and worst part was new problems have also
been experienced.
Old problem which is still not solved
It is still impossible to get the phone working if it switches off by battery getting fully drained. The battery doesn't start
charging even if you put the phone in charging for 24 hours. The charging light blinks but the phone doesnt charge.
New problem after software update
Even if the phone is put on charge for 24 hours, it doesnt get fully charged. Infact the battery indicator doesn't climb up after 2 points and after using the phone for a small time, it says battery discharged and phone switches off.
I have always been stuck to Nokia phones since I've started using handphones but am having the worst experience with
this N97. God knows when the Nokia people will wake up and provide a final solution to this.

Try pulling the battery and leaving it out for 5 minutes. Put back together and commence a recharge. Se if that helps.
Nokia N8 on O2-UK
Firmware 022.014

Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

see the link above
and this discussed in above
http://support.apple.com/kb/ht1766

Ipod touch4g is not detected in pc and itunes after software update

after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?

Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU!

E72 - language will revert after software updating...

Similar Messages

Maybe you are looking for