E72 not retrieving from Hotmail
I have an E72 and it isn't retrieving emails from hotmail.
I had the same issue last week for a day but now the issue is back. I have both hotmail and gmail on my phone. For some reason the gmail connects and updates but the hotmail doesn't.This is a work phone, I need to have access to emails - am not happy.
any clues or tips?
thanks
are you using nokia messaging rather then the internal email client?
if so, set up your email through the client and not NM.
you will need to have the inbound and outbound info for your email addresses which you can google.
in order to do that, as NM is integrated and the default client, you will have to decline the TOS when you get to it.
Similar Messages
-
Error while creating money market transaction - payment details not retrieving from BP master data.
Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
SwamiDear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese -
Posted documents could not retrieve from Finance system (Travel Management)
Hi Experts,
I could sucessfully post the documents to Finance system using T.code: PRRW and when i click on FI/Co documents tab it is showing error Could not retrieve from Finance (FIN310) system, I have checked the ALE configuration form HR outbound documents are sucess also.
Please advise where i have to check, there is no erros during posting posting was sucess with document numbers also.
Appreciate your help if you could let me know if there is any other reports i have to run for posting.
Thanks
MuraliThe problem I faced was related but just slightly different - solution is below. This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio to server CE 7.2 AS Java was:
Could not retrieve deployment system configuration for CE1. Please check if the system is running.
[ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
Thread[Thread-22,5,main]]
Issue is a firewall problem. Solution is:
1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
2) shutdown NWDS
3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
4) open NWDS
5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
7) publish ear.
8) navigate to: http://192.168.1.16:50000/ConverterWeb/
obviously you'll need to replace the internal ip with the ip of your server.
I think this firewall info is somewhere in the docs.
Edited by: adamtarshis on Jul 11, 2010 8:16 AM -
Not retrieving from the Java bean
Sir,
I have this code
try{
connect conn=new connect();
con=conn.createConnection();
String pattern="Noun Verb Noun";
String[] arPat=pattern.split(" ");
System.out.println("Len : "+arPat.length);
for(int i=0;i<arPat.length;i++)
sql="Select category_id from m_word_category where category_name='"+arPat[i]+"'";
System.out.println("SQL : "+sql);
Statement stmt=con.createStatement();
rs=stmt.executeQuery(sql);
rs.next();
int g_id=rs.getInt(1);
sql1="Select word_text from m_word_list where category_id="+g_id;
System.out.println("SQL1 : "+sql1);
ArrayList holdWords=new ArrayList();
Statement stmt1=con.createStatement();
rs1=stmt1.executeQuery(sql1);
while(rs1.next())
holdWords.add(rs1.getString("word_text"));
System.out.println("Actual Sentences : "+holdWords);
int rand=0;
while(true)
rand=(int)(Math.random()*100);
if(rand>holdWords.size())
continue;
else
dWord+=holdWords.get(rand);
System.out.println("Actual words : "+dWord);
break;
GenerateUrlBean sp = (GenerateUrlBean)form;
sp.seturl(dWord);
System.out.println("The generated Url is:"+sp.geturl());
return mapping.findForward("success");
catch(Exception e)
System.out.println("The Exception is:"+e);
return mapping.findForward("failure");
On another page I tried to retrieve the data 'dWord' which i set in the bean
The code I used in the second page was:
<jsp:useBean id="urlBean" scope="page" class="examples.simple.GenerateUrlBean" />
<jsp:setProperty name="urlBean" property="url" />
<tr>
<td>
<%
out.println("The URL: "+urlBean.geturl());
%>
</td>
</tr>But the output it shows was:
The URL:
which seems its not retrieving anything,
Please help
Thank you> Is it a dead thread?
Relax.
Okay, so you create a GenerateUrlBean in your JSP and call the getUrl() method. When does the value that getUrl() is supposed return get set?
~ -
Safari not printing from hotmail
I am running Mac OS 10.5.5 with Safari. Since hotmail has done their recent site upgrade I can no longer print my emails with Safari. The preview comes up blank and when you print it is blank. I have re - installed the latest drivers and have done all of the latest software updates on my computer. When I try firefox it will print but cuts off the page on the right hand side. Does anyone have any ideas
Thank you for your reply. I have tried to save as a PDF and the PDF file saves as a blank form also. Never tried Camino - I will check it out. I am using a Konica Minolta Magicolor 5430DL. I am on a network and have tried my other printers as well and I get the same result with all of them. I also just downloaded the latest release of Safari with hopes that would work and it did not.
-
Original RAW files deleted without warning and not retrievable from trash
I mistakenly deleted a bunch of stacked RAW originals from a web album, thinking they would only be removed from the web album, in which I only wanted to keep the adjusted versions. Since I didn't get the usual "are you aure you want to delete the master" dialog box, I didn't realize what was happening. When I went back to my main project, I saw that all the RAW originals had actually been deleted. Worse, they were NOT in the trash! So I am left with the edited verions of the RAW files instead of the originals. Help! Is this normal?
No not at all normal, and if they are deleted, the Trash should contain an Aperture folder with the images. It may be the library index has been corrupted. It may also be that you have a selection filter in use preventing the images being displayed.
Otherwise ...
In Finder, navigate to your "Aperture Library.aplibrary" and right click. Select "Show package contents." Select the project which should contain the missing RAW files and right click. Select "Show package contents" again to expand the project.
Enter a spotlight command for your RAW files .... ex: .CR2 or .NEF etc. This should show you all the RAW files within the project. Unless you know a specific filename, I would select them all and copy them to a new location. Then review the Thumbnails to see if you can see the missing RAW(s).
If they are in the project but not displayed, rebuild the library by relaunching Aperture while holding down <Option><Apple> keys. Pick "rebuild" at the splash screen.
G. -
Most folders not updating from hotmail account
Recently installed Outlook 2013 as part of Office 2013 Pro.
Have tried to set it up with my hotmail account. Only the Inbox, Sent Mail and Deleted Items folders sync. The remaining folders do not sync and display the message "We didn't find anything to show here."
Can someone please explain! How is it possible that Outlook does not or cannot download all my hotmail messages?!Hi,
How did you configure your Hotmail account in Outlook 2013? Generally, we configure Hotmail account in Outlook 2013 via Exchange ActiveSync protocol. We should type the following server in the Mail server field:
m.hotmail.com
Please first make sure you have configured your account correctly in Outlook.
If you have configured your account correctly, please also make sure the "Mail to keep offline slider" is not set to a short period. To check this, click File > Account Settings > Account Settings > double-click your account and check
if the slider is set to 1 month. If so, change it to All to see the result.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Bought a new iPad2 with wi-fi access. I am at home on my wi-fi network using iPad. Trying to add my Hotmail account to the iPad so I can retrieve my e-mail messages. When I try to add the Hotmail e-mail account to the iPad, I select Windows Live Hotmail on the iPad. I then enter my Hotmail e-mail address and Hotmail password in the iPad. The iPad then says Verifying. Then a box pops up saying "Hotmail Account, Unable To Verify Account Information". I spent about an hour on the phone with iPad support and they tried everything they could to no avail. iPad support said I would need to contact Hotmail support. I have learned that Hotmail does not have a support phone number that you can call, only a search area that is of no help. I am able to log onto my Hotmail e-mail account no problem on my regular computer. I was able to program my wife's Comcast.net e-mail into the iPad no problem and bring up her e-mail on the iPad. I can not get past the "Unable to verify Hotmail Account Information" message on the iPad. Frustrated, want to be able to retrieve my Hotmail e-mail messages from my iPad, please help! Thank you.
My hotmail was working properly until one month ago , then I do not what happens ... My mistake has been to cancel that account and try to re-load it... I am blocked at "unable to verify account details".
I read and follow carefully all your steps here above but it is not working!!
I also try to ask securiry code to mocrosoft and put it instead of hotmail password when creating new Ipad account but nothing.
I try to go everywhere on microsfot pages and on my mail account setting but I can not find any help from there. From PC is working
I try to choose "other" from the list of account and insert there hotmail account, both indicated adsHOTMAIL or OUTLOOK, but in this case it tells me "username or password for POP3.live.com are uncorrect.... what is POP3.live.com??
I already try everything find in the net here and elsewhere ... I have hotmail account since years can not thik to change it .... Some other help?? Some indication I have not yet try?
Why does not appear OUTLOOOK from the choice of default account in the "add account section"????!??!???? -
Mail won't retrieve Junk from Hotmail
Hello, I recently began using Mail on my iBook to retrieve my hotmail account. Everything works great except for the junk mailbox in the hotmail account. Mail won't retrieve any of these messages. I have to log back into hotmail and place the junk into my inbox, which Mail receives fine. In checking settings on both accounts I don't find anything which obviously prevents the junk in hotmail from being sent to the junk box in Mail. Is there a workaround or a setting that I don't have correct? I searched for this problem but haven't seen it mentioned before.
Thanks.Hi Jbird1023, and a warm welcome to the forums!
Not many helpers look into Solved topics for people needing help.
It's quite acceptable, even preferable to start a new topic of your own, it will get more individualized attention, and many more helpers!
It can be hard to sometimes find where to start a New Topic, so here's the link...
http://discussions.apple.com/post!default.jspa?forumID=753 -
The data from a table of a database are not retrieved in ADF BC Application
I have two separate ADF BC applications. Each application retrieve
the data from the same scheme of a database. Both applications work
well when I launch them under embedded OC4J. I have deployed
these applications to a standalone OC4J. When I launch one application,
the data from a database's table are retrieved. When I launch the other
application, the data from a database's table are not retrieved. Why? Please,
help me.Any error message ?
Frank -
Error: The report source could not be retrieved from the state object.
I have been trying to create a report in a JSF page. The relevant parts are below:
Inside the JSP page, this is the code:
<jsp:useBean id="MyBean" class="com.nm.facade.rto.POJOViewerBean" scope="session" />
<jsp:setProperty name="MyBean" property="reportLocation" value="Report1.rpt" />
<v:reportPageViewer reportSource="#{MyBean.reportSource}"
displayToolbarPrintButton="true"
printMode="ActiveX"
zoomPercentage="100"
displayToolbarExportButton="true"
displayToolbarRefreshButton="true"
viewerName="My Viewer"
></v:reportPageViewer>
In the backing bean, this is the relevant code:
public Object getReportSource() throws ReportSDKException
if (propertiesChanged || reportSource == null)
propertiesChanged = false;
if (reportLocation == null)
throw new RuntimeException("The reportLocation property must be set before a report source is retrieved");
ReportClientDocument rcd = new ReportClientDocument();
rcd.setReportAppServer(ReportClientDocument.inprocConnectionString);
rcd.open(reportLocation, 0);
DatabaseController dbc = rcd.getDatabaseController();
//Create the POJO collection and populate it with data
ReportData[] data =
new ReportData("B.B.", "King", 6, new Date(25, 9, 16)),
new ReportData("Muddy", "Waters", 7, new Date(15, 4, 4)),
new ReportData("John Lee", "Hooker", 8, new Date(16, 8, 16)),
new ReportData("Otis", "Rush", 9, new Date(34, 4, 29)),
new ReportData("Buddy", "Guy", 10, new Date(36, 7, 30))
//Create the result set from the collection of POJOs
POJOResultSetFactory factory = new POJOResultSetFactory(ReportData.class);
factory.setVerbose(true);
POJOResultSet results = factory.createResultSet(data);
ResultSetMetaData metaData = results.getMetaData();
//Set the resultset as the report datasource
//Get the table name from the 'Set Datasource Location' dialog in the Crystal Reports designer
String reportTable = "getReportDataDataSource";
dbc.setDataSource(results, reportTable, reportTable);
IReportSource reportSource = rcd.getReportSource();
if (reportSource == null)
throw new RuntimeException("Unable to get a report source.");
return reportSource;
In the CRConfig.xml, this is what is there:
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../reports</reportlocation>
<timeout>0</timeout>
<ExternalFunctionLibraryClassNames>
<classname></classname>
</ExternalFunctionLibraryClassNames>
</CrystalReportEngine-configuration>
The report template 'Report1.rpt' is packaged under WEB-INF/reports in the war file.
When I try to generate the report by accessing the JSF page, I am getting an error: "The report source could not be retrieved from the state object. "
I am not sure what is wrong. Can someone help me in resolving this issue?
Edited by: renshai on Jul 9, 2009 3:21 AMMy formatting gets lost and the message looks unintelligible. After some experimentation, I found that if the message exceeds some length, the formatting is removed. Since I couldn't find any way to delete this post, I made another post with the same subject. Please ignore this post and help me to find a solution for the problem posted in the other thread with the same subject. Thanks in advance.
-
Can connect but not retrieve file list (VSFTPD) from within network
Hi!
I've got a D-Link DIR-100 wired router to which an Airport Express and an MSI Wind (Arch Linux server) is connected. I can connect to the Wind from outside the LAN, which includes SSH, HTTP and FTP. However, FTP won't work if I'm inside the LAN. The Wind has the IP 192.168.0.101 in the network, and I forwarded the port 22 for SSH, 80 and 443 for HTTP and 20-21 for FTP. I'm using OpenSSH, Apache, and VSFTPD.
When trying to connect with Transmit (OS X) I get this error message:
[b]Could not retrieve file listing.[/b]
Server said:
Illegal PORT command.
Error -162: PORT failed
The Transmit log looks like this:
Transmit 3.6.7 Session Transcript
LibNcFTP 3.2.1 (August 13, 2007) compiled for UNIX
Uname: Darwin|asynja.local|8.11.1|Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386|i386
220: (vsFTPd 2.1.0)
Connected to www.mydomain.se.
Cmd: USER myusername
331: Please specify the password.
Cmd: PASS xxxxxxxxxx
230: Login successful.
Cmd: TYPE A
200: Switching to ASCII mode.
Logged in to www.mydomain.se as myusername
Cmd: SYST
215: UNIX Type: L8
Cmd: PWD
257: "/home/myusername"
Cmd: PASV
227: Entering Passive Mode (192,168,0,101,227,13).
Fixing bogus PASV data address from 192.168.0.101:58125 to XX.XXX.XX.XX:58125.
Data connection timed out.
Falling back to PORT instead of PASV mode.
Cmd: PORT 192,168,0,102,204,170
500: Illegal PORT command.
Cmd: NOOP
200: NOOP ok.
Cmd: PORT 192,168,0,102,204,171
500: Illegal PORT command.
(I edited out the IP and login credentials.)
If I try to connect to 192.168.0.101 though it works like a charm. How come I can't use the same adress? I can visit the external IP/HTTP in a browser, I can connect to it through FTP, but I can't view the files?Interestingly, the errors above seem to be a little bit of a
red herring. If I turn off "enable file check in and check out" in
Dreamweaver then files can be downloaded, edited and uploaded
perfectly. I can also create new files. As soon as I turn checkouts
back on, it stops working. The errors above show up in the Apache
server log even when this box is unchecked and yet everything works
correctly. Because Contribute offers no option for editing without
writing extra info files to the server it still won't work.
The Dreamweaver log shows the following when I attempt to
check out a file:
Started: 12/19/08 6:25 PM
Operation timed out. Cancelling...
Operation timed out. Cancelling...
/webdav/robots.txt - error occurred - An HTTP error occurred
- cannot get robots.txt. Dreamweaver could not connect because the
server is down or not accepting connections.
File activity incomplete. 1 file(s) or folder(s) were not
completed.
Files with errors: 1
/webdav/robots.txt
Finished: 12/19/08 6:27 PM
As I mentioned, when I turn off checkouts this whole process
works correctly, and I can edit and create new files. -
Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS
Dear All,
Solman installation 7.1 fails with Error in the Start instance phase.
Database : Oracle
OS: AIX 6100-07-02-1150
Oracle version: 11.2.0.3
Kernel version: 720 patch number is 114
I have checked the SAP Note #1639578 - SSFS as password storage for primary database connect .
The below values has alreadt been set in default profile and in environment variables also
RSEC_SSFS_DATAPATH=/usr/sap/SMI/SYS/global/security/rsecssfs/data
RSEC_SSFS_KEYPATH=/usr/sap/SMI/SYS/global/security/rsecssfs/key
rsdb_ssfs_connect=1
2. The Permission of the Global directory
solmantrg:smiadm 13> ls -all
total 0
drwxr-xr-x 5 smiadm sapsys 256 Apr 18 17:37 .
drwxr-xr-x 5 smiadm sapsys 256 Apr 19 21:51 ..
drwxr-xr-x 3 smiadm sapsys 256 Apr 18 17:37 exe
drwxr-xr-x 3 smiadm sapsys 256 Apr 18 17:37 gen
lrwxrwxrwx 1 smiadm sapsys 18 Apr 18 17:37 global -> /sapmnt/SMI/global
Permission Of security Folder:
solmantrg:smiadm 17> ls -all
total 8
drwx------ 5 smiadm sapsys 256 Apr 22 13:25 .
drwxr-xr-x 5 smiadm sapsys 256 Apr 18 17:37 ..
-rw-r--r-- 1 smiadm sapsys 0 Apr 22 13:25 ABAPPROT
drwxr-xr-x 8 smiadm sapsys 256 Apr 18 17:39 SDT
-rw-r--r-- 1 smiadm sapsys 272 Apr 18 17:37 ms_acl_info
drwxr-xr-x 2 smiadm sapsys 256 Apr 22 13:26 sapcontrol
drwx------ 5 smiadm sapsys 256 Apr 18 17:37 security
Permission Of rsecssfs:
solmantrg:smiadm 20> ls -all
total 0
drwx------ 5 smiadm sapsys 256 Apr 18 17:37 .
drwx------ 5 smiadm sapsys 256 Apr 22 13:25 ..
drwx------ 2 smiadm sapsys 256 Apr 19 21:01 data
drwx------ 3 smiadm sapsys 256 Apr 18 17:37 lib
drwx------ 4 smiadm sapsys 256 Apr 18 17:37 rsecssfs
permission Of data & Key
solmantrg:smiadm 22> ls -all
total 0
drwx------ 4 smiadm sapsys 256 Apr 18 17:37 .
drwx------ 5 smiadm sapsys 256 Apr 18 17:37 ..
drwx------ 2 smiadm sapsys 256 Apr 22 12:42 data
drwx------ 2 smiadm sapsys 256 Apr 18 17:37 key
permission Of SSFS_SMI.DAT
solmantrg:smiadm 24> pwd
/sapmnt/SMI/global/security/rsecssfs/data
solmantrg:smiadm 25> ls -all
total 8
drwx------ 2 smiadm sapsys 256 Apr 22 12:42 .
drwx------ 4 smiadm sapsys 256 Apr 18 17:37 ..
-rw------- 1 smiadm sapsys 972 Apr 22 12:42 SSFS_SMI.DAT
No key for File ( SSFS_SMI.KEY ) IN PATH ( /sapmnt/SMI/global/security/rsecssfs/key) Exists
solmantrg:smiadm 28> cd key
solmantrg:smiadm 29> ls -altr
total 0
drwx------ 4 smiadm sapsys 256 Apr 18 17:37 ..
drwx------ 2 smiadm sapsys 256 Apr 18 17:37 .
3. From smiadm, R3trans -x shows 0000. BUT from ora>sid>, R3trans -x shows 0012
solmantrg:orasmi 2> R3trans -x
This is R3trans version 6.22 (release 720 - 26.10.11 - 13:00:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'SMI'"
R3trans finished (0012).
4. Output Of Trans.log from Ora<SID> User
solmantrg:orasmi 3> more trans.log
4 ETW000 R3trans version 6.22 (release 720 - 26.10.11 - 13:00:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.04.2014 - 14:41:32
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Tue Apr 22 14:41:32 2014 145 0.000145
4 ETW000 [ dev trc,00000] db_con_init called 41 0.000186
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000 91 0.000277
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 84 0.000361
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 40 0.000401
4 ETW000 [ dev trc,00000] Loading DB library '/usr/sap/SMI/SYS/exe/run/dboraslib.o' ... 74 0.000475
4 ETW000 [ dev trc,00000] DlLoadLib() success: dlopen("/usr/sap/SMI/SYS/exe/run/dboraslib.o"), hdl 0
4 ETW000 31906 0.032381
4 ETW000 [ dev trc,00000] Library '/usr/sap/SMI/SYS/exe/run/dboraslib.o' loaded 49 0.032430
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000 61 0.032491
4 ETW000 [ dev trc,00000] Version of '/usr/sap/SMI/SYS/exe/run/dboraslib.o' is "720.00", patchlevel (0.114)
4 ETW000 493 0.032984
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000 55 0.033039
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000 108 0.033147
4 ETW000 [ dev trc,00000] New connection 0 created 264 0.033411
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 79 0.033490
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 79 0.033569
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 53 0.033622
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 35 0.033657
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 74 0.033731
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 36 0.033767
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol 49 0.033816
4 ETW000 ==> connect info for default DB will be read from ssfs
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 88 0.033904
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000 61 0.032491
4 ETW000 [ dev trc,00000] Version of '/usr/sap/SMI/SYS/exe/run/dboraslib.o' is "720.00", patchlevel (0.114)
4 ETW000 493 0.032984
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000 55 0.033039
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000 108 0.033147
4 ETW000 [ dev trc,00000] New connection 0 created 264 0.033411
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 79 0.033490
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 79 0.033569
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 53 0.033622
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 35 0.033657
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 74 0.033731
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 36 0.033767
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol 49 0.033816
4 ETW000 ==> connect info for default DB will be read from ssfs
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 88 0.033904
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [rsecssfs.c 836] 84 0.033988
4 ETW000 [ dev trc,00000] RSecSSFs: Configuration data read from environment parameters [rsecssfs.c 3664]
4 ETW000 11463 0.045451
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/data/SSFS_SMI.DAT" cannot be opened for read [rsecssfs.c 2198]
4 ETW000 174 0.045625
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 1 (message: Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/data/SS
FS_SMI.DAT" cannot be opened for read) [rsecssfs.c 897]
4 ETW000 91 0.045716
4 ETW000 [ dbcon.c ,00000] *** ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/
data/SSFS_SMI.DAT" cannot be opened for read
4 ETW000 82 0.045798
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 37 0.045835
4 ETW000 [ dbcon.c ,00000] *** ERROR => Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS
4 ETW000 68 0.045903
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'SMI'"
trans.log: END
Kindly help us to fix the error ""ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/
data/SSFS_SMI.DAT" cannot be opened for read"
Thanks and Regards,
Gayathri.KHi Deepak,
Now my installation failed with "Start Java engine "phase as in the attached screenshot.
scs00 instance is failing and i am unable to start it.
ERROR 2014-04-22 18:28:50.499 [sixxcstepexecute.cpp:899]
FCO-00011 The step startSCS with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|javaconfig|0|startSCS was executed with status ERROR ( Last error reported by the step: Instance 'SCS00/solmantrg' of SAP system SMI is in an inconsistent state: the processes do not seem to have been started within the instance.).
when i checked in getprocess list
solmantrg:smiadm 56> sapcontrol -prot NI_HTTP -nr 00 -function GetProcessList
22.04.2014 18:29:43
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GRAY, Stopped, , , 13631618
enserver, EnqueueServer, GRAY, Stopped, , , 11468864
have attached the screenshot and sapinst.dev.log
Please assist
regards,
gayathri.K -
Mail 4.5 not retrieving catch-all mail from Pop Server.
I use email fowarding for a domain (hosted at Godaddy) to forward to my verizon email account. For example: [email protected], [email protected], and [email protected] are forwarded to [email protected] The Mail 4.5 client on my MacBook Pro (OSX 10.6.8) retrieves all this forwarded email correctly from the Verizon Pop3 server.
I also have one of the domain email aliases setup as a catch-all account. For example [email protected] is configured as the catch all. Mail addressed to [email protected] is also retrieved from the Pop3 server correctly.
But any mail directed to the catch-all account because the email address is invalid such as [email protected] is not retrieved by Mail 4.5 client.
The 'catch-all' email is being forwarded correctly to my Verizon Pop server. If I log in to Verizon Webmail I can see the forwarded 'catch-all' emails in the Webmail Inbox. Also if I use Outlook 2010 on my PC to retrieve my Pop mail, it correctly brings down the 'catch-all' email.
It certainly appears like something internal to Apple Mail is filtering the 'catch-all' email and not retrieving it from the Pop3 Server.
If you can understand what I'm trying to report - can you help me figure out what is wrong?I now do want to catch all email as it has become my lives work to report spam.
So I figured out an easier way to catch all email using simply the serveradmin command-line tool (this only takes email that would otherwise bounce):
sudo serveradmin settings mail:imap:lmtp_luser_relay_enabled = yes
sudo serveradmin settings mail:imap:lmtp_luser_relay = catchallusername
sudo postfix reload -
My contacts are not updating from the iCloud. How can I actively go and retrieve them?
My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?
Hello there, Lk354.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
Get help using iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
hi, i have had a problem for a while now and i am not really sure why. My problem is using the brush tool in Photoshop, while i am using it, it is fine, there are no problems but when i unclick to stop drawing on my trackpad and try to to scroll usin
-
Weblogic 6.0 SP2 with JDK1.3 as a Win2kPro Service Fails
I have installed the weblogic server 6.0 with sp2 with the intergrated jdk1.3.0. Everything seems to be fine when I manually run it. Bun whenever I am trying to run as a win2k service it fails. To be more specific whenever I am trying to start the se
-
Photoshop CS5 problem opening programme
I have just tried several times to open up Photoshop CS5 version on my Mac, but keep getting a request to install legacy Java SE 6 runtime, which I have now done but every time I try to open photoshop again the same message keeps coming up and still
-
Website tool help - seems like it should be easy
I'm not exactly new, but it's been a long time since I've used Java. I want to create a page with a list of upcoming events that is sortable by the date as well as the state it's being held in, and I want the events to have unlimited room for descrip
-
What can I use to view java script in my browser for iPhone
I can't view JavaScript , what do I use instead. Java's web site says that apple has there own version but I can't find it.