E72 notifcation light does not stop blinking after...

After receiving an SMS my E72 sometimes keeps blinking the light even after reading it/deleting it. It's as if the notification gets "stuck". It also happens with calls but less often.
This only started happening with 052.005, with previous versions where were no problems.
Can anyone confirm this? Is it a problem in the current firmware or is just my unit needing a hard reset?

zetty wrote:
Hi
Do you have the light active for any other apps or service on the phone like e-mail, missed calls, IM, etc...
Only for missed calls or SMS/MMS. I don't have it on for email (as it would blink too often).
Normally it would stop blinking as soon as I see a missed call on the call log or open/delete an SMS.
But since firmware 052.005 now it sometimes does not blink right after the event is "cleared".
I suspect it is a but as this version had some changes to the breathing/notification light behaviour due to asian languages (even if mine is european PT)

Similar Messages

HP C3180 power light won't stop blinking after wireless print (from PC)

I've raised this issue in an earlier post - but maybe with too much verbiage.
My PC prints wirelessly to a (raw Q on a) MAC which is USB-connected to an HP Photosmart C3180. When I use the driver for the 3180 on the PC (either with an LPR port or an internet port), the jobs are created with an "error" status, and never leave the PC.
I've found, however, that the HP 550C driver (and a generic HP Deskjet) will work fine on both the LPR port and the internet port. The printing is exceptionally fast - but the power light continues to blink after the job is finished. I have to press the "cancel" button on the printer console to stop the blinking. Some sort of "handshaking" between the printer and the driver software is not happening, apparently.
I also print from the Mac to the 3180 (foomatic/hpijs C3100 driver, usbtb backend) - and everything works fine.
Any advice/information will be welcome.

Sorry!! much ado about nothing. Since the HP Photosmart is not a PS printer, I have to use (for example) an Apple Color LW 12/660 PS as the driver on the PC (NOT a Windows driver) in order to print over the wireless network to the Mac.
Phew! Printer software makes networking look like a piece of cake!
KRK

Scheduled job does not stop even after the scheduling window closes

We have written custom stats gathering job whose duration has been set as 14 hours in the schedule. This job starts daily at 6:00 PM and expected to complete upto 8:00 AM next day. But the problem is that this job continues to execute even after 14 hours. If we look at the dba_scheduler_job_run_details table, then its execution duration is about 16 - 19 hours daily. We could not understand as why it is not closed when scheduling window closes? Is there any problem with the scheduler configuration?
select job_name
      ,program_name
      ,schedule_name
      ,schedule_type
      ,stop_on_window_close
from dba_scheduler_jobs
where job_name = 'GATHER_STATS_STD_JOB';
Output:
JOB_NAME
PROGRAM_NAME
SCHEDULE_NAME
SCHEDULE_TYPE
STOP_ON_WINDOW_CLOSE
GATHER_STATS_STD_JOB
GATHER_STATS_STD_PROGRAM
GATHER_STATS_STD_SCHEDULE
NAMED
TRUE
SELECT window_name
      ,schedule_owner
      ,schedule_name
      ,schedule_type
      ,start_date
      ,repeat_interval
      ,end_date
      ,duration
      ,window_priority
      ,next_start_date
      ,last_start_date
      ,enabled
      ,active
FROM dba_scheduler_windows;
window_name
schedule_owner
schedule_name
schedule_type
start_date
repeat_interval
end_date
duration
window_priority
next_start_date
last_start_date
enabled
active
GATHER_STATS_STD_WINDOW
sys
GATHER_STATS_STD_SCHEDULE
named
+00 14:00:00.000000
high
23-feb-15 06.00.10.000000 pm +02:00
23-feb-15 06.00.10.095878 pm +02:00
TRUE
TRUE
We are using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod on Linux platform.
Message was edited by: Moazzam

Straight out of the docs 83 DBMS_SCHEDULER
stop_on_window_close
This attribute only applies if the schedule of a job is a window or a window group. Setting this attribute to TRUE implies that the job should be stopped once the associated window is closed. The job is stopped using the stop_job procedure with force set to FALSE.
Having said that, stop_job with force applies to whether information about the job is gathered - you would have to test, but I believe that the statistics gather will be terminated in the middle of whatever it's doing.
Update: force says:
force
If force is set to FALSE, the Scheduler tries to gracefully stop the job using an interrupt mechanism. This method gives control back to the slave process, which can update the status of the job in the job queue to stopped. If this fails, an error is returned.
If force is set to TRUE, the Scheduler will immediately terminate the job slave. Oracle recommends that STOP_JOB with force set to TRUE be used only after a STOP_JOBwith force set to FALSE has failed.

BB 9300, indicator light will not stop blinking

Earlier today I received a call from a number that was supposed to be blocked in my Mr Number Callblock app, but came through anyways. Ever since, my light is blinking like there is something I need to check, but I have gone in and been through every app and even the hidden folders and can not find any notifications. I have done a hard reset. I am on 5.0 currently and there are no icons at the top of the screen or anything to show me what I need to check to turn the light off.
Any tips?
Solved!
Go to Solution.

Well good.
I love the unexplained resolutions.
Good luck!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

N8 Social Application, does not stop traffic after...

Hi!
Why does the edge icon stays connected after exiting the social app?
When I go to connections I can see that the phone sends and receives traffic and I have to force it to disconnect two times before it stops!
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Still got this problem on Social Application 1.3
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Re: g6t-2000 loading circle next to cursor will not stop blinking

I have the same problem.I got a blinking circle on my screen and every time this circle show up, i have to turn off my pc because don't let me do nothing. Any solution for that issue? My pc:HP ENVY Recline TouchSmart All in One - 27-k350 (ENERGY STAR)Número de modelo: J4W47AA

Hi again Andieco, It is good to hear back from you! If your computer is not freezing when you are referring to a white circle, there may be an issue with the touch screen software installed on your computer. To correct this, I suggest re-installing all of the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), and then update the software by Using HP Support Assistant (Windows 8). If the white cursor will not stop blinking after performing the steps in the documents above, I recommend returning your system back to a previous restore point to before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

After updating to 4.4.2 the notification light does not change colors. How do I fix this?

After updating to 4.4.2 the notification light does not change colors. It only blinks one color. How do I fix it?

Hello Saralynn43. Getting new updates is always fun, but then there are certain changes that can take some getting used to! This may be one of these cases where there may have been a change done to the notification system. What are the notifications that have been affected with the color change? Let us know as we'd like to look into this for you. Thank you.
NicandroN_VZW
Follow us on twitter @VZWSupport

My Macbook built-in keyboard has stopped responding, (even caps lock light does not come on). What can I do as cannot even login to computer?

My Macbook built-in keyboard has stopped responding, (even caps lock light does not come on). What can I do as cannot even login to computer?
There has been no spillage and it has not been dropped.

Do you have access to a USB wired Apple (or maybe even a PC) keyboard?
That may be used to help troubleshoot the internal keyboard and on startup
be able to access (or see if you can) the System, and attempt to see about
troubleshooting. See if it will start in SafeBoot, (shift key held down just after
startup tone, if it runs in safeboot, then login to see if you can read system
logs in Console) and another idea may be to attempt to start in Recovery &
then attempt to use OS X Utilities there to see if you can verify and then to
repair the hard disk drive, and do some checks on the hardware.
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Was the computer an Apple official refurbished unit bought direct from Apple?
Did you get an extended warranty from Apple - if it were directly bought there?
Usually these are online purchases from Apple Store; other companies offer
repaired or restored used computers and call them 'refurbished' or they may
have bought actual refurbished from Apple stock; these may be resold on ebay
or via amazon, and may or may not have a residual warranty of some kind.
In some cases the keyboard may fail due to some connection on the logic board
not fitting correctly, or some other loose wire; however if the battery may have
swollen, that could contribute to issues with both trackpad and keyboard.
A visit to an authorized Apple service provider is recommended, or contact the
seller you bought yours from to ask if they may offer suggestions or perhaps a
discount on diagnostic + repair if there is no warranty on the product.
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
https://locate.apple.com/country - locate authorized sales, service, by country.
Without more information, you may have to look into your local consumer
protection laws to see if your area may allow you more than others when
it comes to problems with electronics. If in the EU or UK, it may be longer.
You could contact a nearby Apple Store with Genius bar for advice...
Good luck & happy computing!

Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why?

Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why? edit
Details

Sorry, I should distinguish between slow loading and manual reloading.
I understood your problem to be that Firefox never finished loading the page, i.e., some part of the page was loading too slowly.
By reloading, I meant Ctrl+r (or the reload button), to manually reload the page. You can disregard any cached files and reload all content fresh from the server by adding the Shift key, i.e., Ctrl+Shift+r (helpful when specific sites do not load correctly).
If the page is automatically reloading itself over and over, that sounds like a completely different problem.

Render engine does not stop after reaching 100%

It looks like to me that the render engine does not stop after reaching 100%. It does not affect the rendered file which is fine and complete
-the Pause and Stop buttons are displayed but have no effect on pausing or stoping the render
-when I want to quit SG, it locks up and have to Force Quit to get out of it.
I really like the program though and hope you are going to fine tune the UI and make it look like After Effect and Premiere.
I would encourage you to instaure round tripping between these two apps and SG.
It would be nice to have curves as well.
Thanks guys
Brice

Could you open the defaultTrace.X.trc files and check for the errors?
Good from my point of view is to make a search if those files for some stack traces with the string ".dsr."
Regards,
Aleksandar

My MacMini does not stop after giving the order ''switch off''.What can I do?

My MacMini does not stop after giving the order ''switch off''.
It stops only, after pushing the button ''on/off'' for some seconds.
What can I do?
frahsun

boot the Mac into safe mode, repair permissions while in it, then reboot normally.
if that doesn't help, try resetting the System Management Controller (SMC).

HT3904 Magic Mouse: new batteries, indicator light does not come on?

I replaced the batteries in my Magic Mouse a week or so ago. The Magic Mouse stopped working today. The batteries tested "'weak", but after I installed new batteries, the green indicator light does not come on. What do I do next?

Hello:
I would try another set of batteries.
If that does not help, reset the PRAM and SMC.
Barry

My ipod will not stop blinking!!!

I just got this thing today and I am already having problems! My iTunes page says that the ipod has been updated and yet the actual ipod will not stop blinking orange. I thought it was a fluke but then the computer said that the songs that I put on the ipod was in use by another program. I don't know what it means but the stupid thing has been doing this for hours now. Can someone help me?

Hi,
This is a common issue with the windows computers. There is noting wrong with the iPod shuffle. The iPod shuffle is in use by the computer and the its programs.
This will be resolved once the computer is restarted. Make sure that the iPod is connected to the computer while you restart the computer.
After it is restarted eject the iPod shuffle from iTunes or My Computer.
Post back if you have any questions.
Santo

E72 notifcation light does not stop blinking after...

Similar Messages

Maybe you are looking for