E72 operator's name not visible
Does someone have the same problem? Namely, I can not see full name of my mobile operator in the first line at the main window, right from strenght of mobile signal. The operator name has two words and I am not able to see last three letters of the second word. The date which is in the same line is displayed correctly. What should I do in order to see full operator name?
yes. my last letter of my operator's name is half almost erased
Similar Messages
-
Member names not visible in ASO database
Hi,
I created a metaoutline in EIS to load an ASO cube.
I was trying to load members from EIS and the member load was completed successfully.
When i checked the cube from Essbase Admin console, i can see that the outline has been created but the member names are not visible in the outline - the weirder thing is that the aliases and formulae of members are visible in the outline.
What could be the possible cause for this behaviour?
Thanks,
Rahul.Hi,
Do you guys have an idea as to why this could be happening? I'm trying to tune some BSO cubes which run for hours together and trying to convert them to ASO but am stuck at this point!
Thanks,
Rahul. -
Column names not visible in JTable
Hello everyone,
i have an Object array columns that i pass to the constructor of JTable, but for some reason the column names are not visible in my table.
private final Object[] columns = {"Zeit", "Termin"};
private Object[][] rows;
//the next line fills the two-dimensional rows-array
fillRows();
//here the constructor
JTable table = new JTable(rows, columns);
table.setColumnSelectionAllowed(false);
table.setDragEnabled(false);
table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
TableColumnModel colModel = table.getColumnModel();
TableColumn column = colModel.getColumn(1);
column.setCellRenderer(new BookedCellRenderer(new int[] {3,4}));What are possible reasons/sollutions for this problem?Gosh, thanks! Usually i always use a jscrollpane for
jtables and was about to use it too, but i got
confused because of the headers when i tried to see
whether the data in the table was right.You're welcome. The JTableHeaders object can be displayed in, say,
the NORTH part of a BorderLayout while the JTable itself is displayed
int the CENTER part. You can even display the headers SOUTH of
the table itself if you like. A JTable object is quite flexible.
kind regards,
Jos -
Service and operation options are not visible in catch event.
I have created a file adapter service and calling the same using throw and catch event.I have created service call type conversation which is configured in throw event with default conversation option.But when i am trying to config same in catch event my service name and operation does come up.
Any idea ?
http://postimg.org/image/orb03h29x/Hi Madhu,
My Understanding:
1. When you enter the main/header product in the item details, the item catefory for the header product gets determined.
2. Your components can also be seen below as sub-items automatically, but the item category is not determined.
Tell me if my understanding is correct.
If Yes, u need to maintain the item category determination for the sub-items or components as well.
Transaction Type: Put the service order transaction type
Item Category Group: Check the item category group of your component product in COMMPR01 (Material tab/ Sales and Distribution Tab)
Item Category Usage: Leave it Blank
Main Item Category: Put the header product item category
Item category: Put the desired item category here.
Also ensure that in the customizing of the header item category, u have maintained the Structure Scope as A- Single Level Explosion of Structured Products.
Regards,
Shalini Chauhan -
SENDING REPORTS O/P THRU E-MAIL: ATTACHMENT NAME NOT VISIBLE
Hi,
I have created a report program which will convert report o/p to excel sheet and send the attachment to the mail id provided in the selection screen. Here in this case the mail is going perfectly, and the attachment also but the problem is the attachment name is not visble.
From the program it is expected that the attachment name is delivery.xls. but in the mail it is showing only .xls...
here is the code I used. Please correct me...
REPORT ZRAM.
TABLES: LIPS.
DATA: BEGIN OF IT_LIPS OCCURS 0,
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
MATNR LIKE LIPS-MATNR,
WERKS LIKE LIPS-WERKS,
END OF IT_LIPS.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
SELECT-OPTIONS: S_VBELN FOR LIPS-VBELN.
PARAMETERS : P_EMAIL TYPE somlreci1-receiver lower case DEFAULT
'[email protected]'.
SELECT VBELN POSNR MATNR WERKS
FROM LIPS INTO TABLE IT_LIPS
WHERE VBELN IN S_VBELN.
PERFORM build_xls_data_table.
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Delivery details'
'XLS'
'delivery'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'VBELN' 'POSNR' 'MATNR' 'WERKS'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_LIPS.
CONCATENATE IT_LIPS-VBELN IT_LIPS-POSNR
IT_LIPS-MATNR IT_LIPS-WERKS
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test lips records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODYHi
check the blow code:
DATA: receiver LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
MESSAGE ZF100 (FTP an UDB fehlgeschlagen)
text-msgid = msgid.
text-msgno = msgno.
text-msgv1 = msgv1.
text-msgv2 = ' '.
text-msgv3 = ' '.
text-msgv4 = ' '.
express_hold_time
express_hold_time-days = 01.
express_hold_time-h_min_sec = 240000.
receiver
receiver-receiver = mreceivr.
Gruppe von Empfängern
receiver-rec_type = 'C'.
und Expressmeldung ausgeben
receiver-express = 'X'.
APPEND receiver.
CALL FUNCTION 'MESSAGE_SEND_AS_MAIL'
EXPORTING
msgid = text-msgid
msgno = text-msgno
msgv1 = text-msgv1
msgv2 = text-msgv2
msgv3 = text-msgv3
TABLES
receivers = receiver.
IF sy-subrc <> 0.
WRITE:/ 'hat nicht geklappt', 'SY-SUBRC =', sy-subrc.
ENDIF. -
DW File Names Not Visible in Local View?
Hi, in Dreamweaver CS4 in the bottom right of the UI is the (Files > Local View) It shows a list of the files in you website. The files were appearing just fine but now all I can see is the DW icon for each file unless I hover over the file to see what it says. Before the whole file name was easily visible. I’ve never had this happen before.
Anyone know what’s up with this and how I can fix this?
DW CS4
Mac OS 10.6.8Might be a bad cache file.
http://forums.adobe.com/message/1943039#1943039
Nancy O. -
PSA table name not visible in the list
Dear All,
I have been trying to delete the data from the PSA tables using the process type <b>Deletion of Request from PSA</b> and the Object type <b>PSA TABLE</b>.
When searching for the PSA table name in the <b>Object Name</b> list, I am not able to get one of the PSA table names (/BIC/B0000505). Though I am able to get all the other table names in the list. (Ex. /BIC/B0000504 , /BIC/B0000506) .
Please let me know the possible reason for this and how to rectify the same so as to include that PSA table name
Regards
ShalabhHi Raghavendra,
The table is present in the system (SE11/SE16) and contains data as well.
The problem is, I am able to find the other tables from the same datasource in the list, but am not able to find this only PSA Table in the list.
Has it got anything to do with corrupted PSA table and need to re-tranport the Datasource ??
Regards
Shalabh -
Certain artist names not visible
Hi
The problem I have is that when scrolling through "Artists" about 10% of them are missing. They are all there in iTunes, but not on my iPod. The tracks are definately on the iPod as I can play them via Song Name, or Album Title.
Any help would be appreciated.
Windows XP - iPod 60Gb Video - iTunes v7.4.3.1
Thanks!It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
You should also check that the songs have album name info in their ID tags.
See: Some songs don't show under artist on my iPod.
Once you add a second album name for that artist even for a single song, ALL the rest of the songs should now show up under that artist, even those without album names. -
"Operations Setup" - System not visible
I added two systems (CRM 2005) in SMSY and put them in a logical component as well as in the solution scenario.
If I open DSWP and try to execute "Operations Setup" I can see only one systems although both systems have the flag "Productive" in SMSY.
What am I missing?
Markus> Go to Operations Setup / Solution Landscape /
> Solution Settings. Pick the "System Group" tab.
> Right click on Systems in your Logical Component and
> select "Put in Solution".
Thank you for your answer - but as stated above the system is already in the solution
I see there
SAP CRM 5.0
and beside that both systems (MTU:100 and MP1:100) - I do see only MP1:100 in the operations setup.
Markus -
Tabs under the operations and operations setup are not visible...DSWP issue
Hi Gurus,
After I select the active solution from DSWP txn.I couldn't see the tabs (Solution landscape,servicce level reporting,system monitoring etc etc)on the right hand side.Left hand side Solution overview ,operations setup,operatiosn tab are displayed...when clicked on one of these nothing is displayed on right side...Could any tell me if there is any configuration problem or any service needs to be activated.
Thanks
AllanHi Allan,
Yes, maybe you missed some of the ICF services that need to be activated.
Check IMG:
SAP Solution Manager -> Basic Settings -> SAP Solution Manager System -> HTTP Services.
Read all the documentation for each step.
Regards,
Valdecir -
[Solved]Web Service Data Control operation not visible in Data Controls
Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I'm using CVS so I think maybe some files were write protected while creating the control.
These are the files where Data Control is written to:
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<Source>
<definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
wsdl="my_wsdl_location">
<service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
<port name="MyServicePort">
<operation name="initiateMyService">
<dataformat format="XML"/>
</operation>
</port>
</service>
</definition>
</Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
<ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
BrokenboneFound out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB -
[Solved]WS Data Control operation not visible in Data Controls in JDev
Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I tried on JDev forum but had no success.
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<Source>
<definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
wsdl="my_wsdl_location">
<service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
<port name="MyServicePort">
<operation name="initiateMyService">
<dataformat format="XML"/>
</operation>
</port>
</service>
</definition>
</Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
<ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
<ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
BrokenboneFound out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB -
ODI Running Packages not visible in Operator
Hi All,
I have a set of packages running in ODI which show up their execution status in operator under status tab but they are not visible under all executions.
Can anyone help me as why this happens?
Thanks .....Hi,
1. Goto OPERATOR
2. Click onto the All Executions node
3. On the right hand side you will find the following headings
Status ,Session Number , Session Name , User, Physical Agent , Start , End , Return Code etc.
4. Click onto the Start and choose ascending or descending based on your need
Thanks,
Sutirtha -
Hello Team,
When I am trying to execute the below code i am getting the following error. Any help would be greatly appreciated.
Set oFSO = CreateObject("Scripting.FileSystemObject")
If Not oFSO.FolderExists(SavePath) Then
Set f = oFSO.CreateFolder(SavePath)
Else
End If
53 4/11/2014 12:27:22 PM Error:
Error in <NoName(4).VBS> (Line: 9, Column: 1):
File name or class name not found during Automation operation: 'CreateObject'
I have googled through the error and tried to re-register the scrrun.dll using regsvr32 eventhogh it is successfully registered, i am getting the following error. My PC is windows 7 32bit OS.
any help is greatly appreciated.The following script class will write a log file entry. See if it will run for you.
The script is using a class object that you might not have seen before. A little intro: The top section is just for testing the class. Normally I just comment this out after the class is working well. It should run right way. I would save the vbs file in the editor, That way when you are using autoactpath or currentscriptpath variables they will be able resolve the paths.
Paul
Attachments:
LoggingCode_V2.VBS 5 KB -
Hi All,
I am in CE 7.1.1 EHP1. I have declared the DC usage dependency of a composite application project in another composite application project. At development time I can find the application service of the used project but unable to get any public operations that are there in that application service.
Has anybody any clue?
Regards
SunitHi
Some configuration issue of private or Public , it is not visible means it is made private in configuration.
Best Regards
Satish Kumar
Maybe you are looking for
-
Need "Rotate" Function in Photo Gallery
All of my screen grabs end up 90 degrees rotated in PhotoGallery. There is no rotate function in Photo Gallery so to deal with these images I first open them in Adobe Editor on iPad and rotate them then save them to PhotoGallery. Is there a better wa
-
Can I duplicate an e-mail to send out to different address's?
Is there a way to duplicate an e-mail that I would like to send to several people without cutting and pasting the subject line and e-mail bo I do not want to use the BBC as I want to make it more personal Thanks Greg
-
Korg Wavestation Plug ins not appearing in Logic 9.1.3
Hi all; New to the Forums and Logic. I just upgraded to Logic Express from Garageband and Im still pretty new. I am finding my way around ok but I am having an issue with my Korg Wavestation Plug ins showing up in Logic. They show up fine in Garageba
-
How to know the System State in java
Hi I would like to know ,is there a way to get the System status in java, like whether System is idle or any browser is opened or any application is running? this information is required to run the screensaver as we know Screen saver will run when Sy
-
IStat Pro: which fan speeds/temps do you have (iMac)
Hi there, yes, I know, this kind of question has passed before... In order to eliminate everything which could cause my iMac to shut down itself after a while running, I really would be pleased to get a clear answer on this one. It seems more and mor