E72-Packet Data connection message when answering ...

I get the following message when I dial or answer the phone: "Packet Data Connection on hold".
When I hang up I get: "Packet Data Connection active".
First of all, I don't know what packet data connection means nor do I have a need to know as long as the E72 works, which it does.
How do I get rid of these stupid messages?
Thank You!

Look for the usual suspects as Nokia Messaging, Mail for Exchange, etc... that run in the background and need a connection. But if you don't want to know I'm not telling you.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

N97 mini message "packet data: packet data connect...

hi
I got a new nokia N97 mini a couple of months ago, it's on a plan with optus, and it's been working fine until a few days ago it keeps flashing this message 'packet data: packet data connection not available' and it won't let me access the web, or even send messages I've tried resetting it but no luck please help me!

Contact you Operater to confirm that the Packet Data Plan isn't deactivated.. If its active..request them to send the settings once again.. Normally these are sent thru' SMS.. When you receive..first delete all the access points from your phone.. then open the SMS and select..'SAVE'..Now try..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Packet Data connection and Wireless Connection at ...

I use Nokia for Exchange to push my mail this from 06Hr00 until 22Hr00 on a Nokia N82 latest firmware (same problem on the first firmware)
When this connection is open i'm not able for example surf the internet through a wireless acces point at the same time. If a disconnect the packet data connecting everythings works fine.
The error message i receive is "Web: No gateway reply"
Is it possible to have to different kinds of data connection open??
Message Edited by gip9190 on 26-Jan-2008 07:43 AM

You are welcome. I hope it will help you make the right decision. We are looking forward to welcome you in the world of S60v3 smartphones

Packet data connections n97

Hi,
I've had the N97 for a little while now, when connecting to the web I've always used the WAP services 'contract WAP' option as opposed to the Internet 'Contract Internet'. When taking out my contract with the phone I ensured that it included the mobile internet (free surfing etc) within the package
Whenever I've tried to connect via 'Contract Internet' as opposed to 'Contract WAP' I get the message 'Packet data connection not available'even when in a 3G area with full strength signal. I've made sure the phone settings are set to packet data where available etc. Is there something else I should be doing such as contacting vodafone to get them to activate the mobile internet on my number/account?
One other thing, have had the phone for 2 months and no matter how many settings I try the accuweather application never works, will only ever say 'loading', any fresh advice on that one?
Thanks in advance for any helpful advice.
Solved!
Go to Solution.

In your post, you mentioned contacting Vodafone to check if mobile internet was enabled on your account. Have you done this yet? If not, give them a call and while you're on the phone to them, ask them to send an SMS to your phone with their internet configuration settings which will program you phone with the right info.
If you've contacted them already and they've got it enabled, go to their website to check the details for mobile internet.
Regarding your Accuweather problem, have you downloaded the latest version from Ovi Store? I realise you can't do this out and about but do you have home wifi you can use? Not being able to access mobile internet will prevent Accuweather from working properly anyway.
Message Edited by matt_t on 23-Sep-2009 03:12 PM
Nokia N8 on O2-UK
Firmware 022.014

N97 packet data connection on hold

Good day,I have a N97 with an unlimited data plan. But I´m having a problem, when I receive or make call or send text message my phone show this message “packet data connection on hold”, and when I finish the call or sent the text message the phone shows “Packet data connection active”. There is any way that I can change this? I want to have my data connection always active.Thanks in advance for your help
Solved!
Go to Solution.

you would have to go into the settings - connectivity- the first tab is network - select this and it tells you network mode, select this and you can set it to dual mode - umts or gms only mode. if your phone was made for your region and it supports the frequency that the network provides then it should work in 3g if it does not which is possible then it will only work on edge
Message Edited by radical24 on 14-Jul-2009 01:26 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

E90 Packet Data Connection Active

When I make a phone call on the E90 I get a beep and then message "packet date connection active" both when I start the call and when I end the call.
How can this message be supressed and what is causing it. I do have mail for exchange running, that is the only thing I know of running at the same time.

As you noticed yourself your Mail for Exchange is running. This needs GPRS connection for syncing and the GPRS is on most of the time so when you make or end a call you get this message.
If you have unlimited Data Package then nothing to worry.

N95:Packet Data connection active???

For heavens sake! how do you turn off Packet Data Connection? so I can clear the log counter.. Or is there a way to turn off your access point so you can edit? Or can I just disable internet access? Or do I need to use the dark side of the force, and risk enternal damnation in the afterlife? Message Edited by bigbad on 18-Sep-200709:59 PM

Phew! Cracked it at last. Many thanks to you and others for your efforts in trying to solve the problem with the N95 handset.
In my particular case, the problem was the 'Orange' Camera Application which is easily disabled via the appropriate setting if you can locate that. It seems to log onto a packet data connection every 15 mins or so. Presumably, this is in order to check whether there are any image files to upload/download from/to the handset from an Orange Photo Album etc. The handset camera works perfectly well without this application which merely provides a short cut to other Orange services connected with photography which I and no doubt others could manage without.
This is not an obvious solution although it is indeed caused by non Nokia application software as has been suggested - but presumable approved by Nokia in conjunction with Orange. They seemed to be unaware of this causing a problem, no doubt because many other applications might do likewise and many contracts include these auto connection charges. I hope this information is useful to you. Thank you for your efforts in trying to establish the cause of the problem. This is not entirely all my own work since somewhere on the web the camera was mentioned but I couldn't see the relevance at the time nor what to do with it.
So, if you still have this problem and have disabled all the likely applications that might be going on line every 15 mins or so ... then the answer is to disable the Orange Camera Application. The camera itself will work just fine but if you wish to upload to an Orange photo album etc, you might have to reconnect/enable the Camera Application as and when required.

Switching off packet data connection

Nokia 5800
The Internet Destination contains 2 access points, my wifi and my network data connection. If I move my network data connection to a different Destination (e.g. Roaming) will that be enough to disable packet data while abroad so I don't get any nasty suprises when I see my next bill?
Is there anyway any application will still have access to Packet Data?
Thanks

Packet data settingsSelect Menu > Settings and Connectivity > Admin.settings > Packet data.The packet data settings affect all access points using a
packet data connection.
Select from the following:● Packet data connection — If you select Whenavailable and you are in a network that supports packetdata, the device registers to the packet data network.
Starting an active packet data connection (for example, to
send and receive e-mail) is quicker than if the device
establishes a packet data connection when needed. If
there is no packet data coverage, the device periodically
tries to establish a packet data connection. If you selectWhen needed, the device uses a packet data connectiononly if you start an application or action that needs it.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

E5 Packet data connection/access point

I was just wondering what this is.
I think I don't need it being as I don't have a "Data Package" set up with AT&T...am I right?
If I'm wrong, what to do next.

This would be needed for internet access and mms usage on your phone. Internett access only if you're thinking about surfing on the network. Wlan does not require any data packet connection over the phone network but will be saved as an access point though.
You will also need a packet data connection for using A-gps as it needs a few kb to locate the phone through the network.
But you can use the gps without agps.
So if you don't plan on browsing internett on the phone network, you don't need a packet data connection for that/ acces point.
If you don't need to send mms, you don't need one for that either, but those acces points are separeted from each others.
If you can not send mms, but you want to, you will probably be able to order the settings (accesspoint) from your providers web page. It will usually be in form of a text message sent to your phone. Same for the other access points.
Did this help you in any way or was it just confusing?
A Packet data connection will pretty much be an access point for internet/mms/wap over your network.
Using you wlan will be installed as a access point too, but that will of course be free (or just cost what you pay to have your internett).

Nokia X6 - Packet Data connection Active?

Quite a lot of times (if not every time) I finish a phone call i get a box pop up on the screen witrh the message "Packet Data Connection Active"
Any ideas what this means? Is there something wrong in the settings I need to change?
Thanks
Ian

My mobile is any time connect packet data .
i cant understand problem
please verify my proble m
mob ############
email : _______@____.in
_______@____.in
MODERATOR'S NOTE:
We would like to inform you that we have removed your personal details (e.g. full name, mobile number, email address) as it is unwise to publish personal details on forums like this.
We kindly ask you not to share personal information on this forum

Buffering table not up to date error message when creating a Cart

Hi Folks,
We are getting a 'Buffering table not up to date' error message when attempting to create a Cart. The error message only happens to the one end user ID only with the others not getting this error, therefore suggesting that my SRM org plan set-up is correct.
Has anyone come across this previously and what checks are available in the system to resolve this? As mentioned, the attribute check is okay and I have also removed the user ID from the SRM org plan and reassigned again but this has not corrected the problem. We are on SRM 5.
Thanks. Mike.
Message:
Buffering table not up to date
Method: GET_STRUCTURE_PATHS_UP of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_ID of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Form: USER_DETAIL_GET of program SAPLBBP_SC_APP
Form: GLOBAL_FILL of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
Form: APP_EVENT_HANDLER of program SAPLBBP_SC_UI_ITS
Edited by: Mike Pallister on Nov 5, 2008 11:44 AM

Please advise on this problem. When I try to check the Approval Overview tab for these two shopping carts.
I got a dump.can anyone help me.
Information on where terminated
    Termination occurred in the ABAP program "CL_BBP_ES_EMPLOYEE_MYS========CP" -
     in "IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 35
    of the (Include) program "CL_BBP_ES_EMPLOYEE_MYS========CM008".
    The termination is caused because exception "CX_BBP_ES_INTERNAL_ERROR" occurred
     in
    procedure "/SAPSRM/IF_PDO_DO_APV_EXT~GET_AGENT_DETAILS" "(METHOD)", but it was
     neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "/SAPSRM/CL_PDO_DO_APV_EXT=====CP "; its source
     code begins in line
    1 of the (Include program "/SAPSRM/CL_PDO_DO_APV_EXT=====CM00E ".

The packet data connection indicator

I have a symbol showing on my E71 which is presumably a "GPRS packet data connection" but it doesn't have the lines underneath it, crossed out or not.
What does this indicate?

27-Jul-2006
09:54 AM
micaradu wrote:
U can call orange and tell them to disable this.I saw a post from someone who gave them a rang and they disabled this feature for the.Anyway if they say it can't be done try again untill the right person answers the phone.In may not cost u anything to have it on but it will drain your battery much faster.Hope this helps!
Cheers!
The only way to disable it, is to kill ALL of your data services - which is what the update will do. It's hard coded into the variant apparently.
Had this confirmed by a senior tech. They really have borked their variant!
Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
T-Mobile: N96

I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

My current softward is: Mac OS X Lion 10.7.5 (11G63)
When I attempt to use the Filezilla connection wizard I get the following message:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.7.1.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 27.0.19.56 ch-a-bj-fg
Response: 200 OK
PREP 52470
Response: 200 Using port 52470, data token 1871898076
PORT 27,0,19,56,204,246
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
When I attempt to login Host/Username/Password myself I get the following message:
Status:          Resolving address of amyhoney.com
Status:          Connecting to 184.168.54.1:21...
Status:          Connection established, waiting for welcome message...
Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:          220-You are user number 12 of 500 allowed.
Response:          220-Local time is now 04:05. Server port: 21.
Response:          220-This is a private system - No anonymous login
Response:          220 You will be disconnected after 3 minutes of inactivity.
Command:          USER 5475****
Response:          331 User 5475**** OK. Password required
Command:          PASS ********************
Response:          530 Login authentication failed
Error:          Critical error
Error:          Could not connect to server
Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
HELP!!

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Wlan & packet data connectivity loss after firmwar...

I have a N91 8gb and recently upgraded the the firmware. I currently cannot connect to any wifi hot spots. I can detect them but when i try it says : "connection not available" or "wireless network not found". The same prompt comes up for packet data.
PLEASE does any one have any idea how to solve this problem?

20-Apr-2008 12:01 AM
friedbrains wrote:
set your settings again...
I've done a phone memory restore already but the problem still occurs.If there are any other settings I should check I would like to know please. Thanks in advance!!!!!!
MY PHONE ISN'T MUCH OF AN N91 without the Wlan!!

Opening an Excel 2003 file in Office 2010 Universal Data Connection error when opening the file from a domain.

Hi.
One of my users are having problem with old accounting files in Excel 2003 when opening Excel 2010.
The user experience that linked information is not being updated properly.
And suspects that it something do with Universal Data Connection .
How can an Excel 2003 spread sheet be converted to Excel 2010 spread sheet and still contain active links?
When the user is opening and converting the file as mention in your suggestion, on the common share on a common domain, the links "breaks".
we are not using SharePoint on our domain.
But when doing it on a local machine, the links does not "breaks".
Looking forward to get solved to this problem.
Thank you in advance.
Rgds

it sounds link, the links changed from relative paths to absolute path. You need to use absolute path in original file.
KR

E72-Packet Data connection message when answering ...

Similar Messages

Maybe you are looking for